summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-10-27Remove duplicate includes from many filesZimny Lech
Signed-off-by: Zimny Lech <napohybelskurwysynom2010@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27ptrace: cleanup arch_ptrace() on ARMNamhyung Kim
use new 'datap' variable in order to remove unnecessary castings. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27ptrace: change signature of arch_ptrace()Namhyung Kim
Fix up the arguments to arch_ptrace() to take account of the fact that @addr and @data are now unsigned long rather than long as of a preceding patch in this series. Signed-off-by: Namhyung Kim <namhyung@gmail.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27mm: fix race in kunmap_atomic()Peter Zijlstra
Christoph reported a nice splat which illustrated a race in the new stack based kmap_atomic implementation. The problem is that we pop our stack slot before we're completely done resetting its state -- in particular clearing the PTE (sometimes that's CONFIG_DEBUG_HIGHMEM). If an interrupt happens before we actually clear the PTE used for the last slot, that interrupt can reuse the slot in a dirty state, which triggers a BUG in kmap_atomic(). Fix this by introducing kmap_atomic_idx() which reports the current slot index without actually releasing it and use that to find the PTE and delay the _pop() until after we're completely done. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Christoph Hellwig <hch@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27msm: timer: Decrease shift on timer clocksourceJeff Ohlstein
The shift of 24 causes the shift and multiply operation to sometimes overflow, resulting in incorrect timer values and poor performance. Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27arm: mach-msm: fix error handling in msm_iommu_probe()Vasiliy Kulikov
msm_iommu_probe() didn't free mem_region and mapped IO. Also if request_mem_region() failed then error handling code dereferenced NULL pointer. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Acked-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27msm: fix Kconfig target board selectionDaniel Walker
This prevents build failures since it's currently possible to select 8x50, 7x30, or 7x00 without selecting a specific board. These changes just force a target selection, which is currently defaulting to the most common one (7x30 only has one). Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27msm: fix compile failure on struct membank node memberDaniel Walker
In commit be370302742ff9948f2a42b15cb2ba174d97b930 "ARM: Remove DISCONTIGMEM support", it removed this "node" member which cased the following compile failure in mach-msm, linux/arch/arm/mach-msm/board-halibut.c: In function 'halibut_fixup': linux/arch/arm/mach-msm/board-halibut.c:86: error: 'struct membank' has no member named 'node' linux/arch/arm/mach-msm/board-halibut.c:86: error: implicit declaration of function 'PHYS_TO_NID' I've removed the access to the node member which corrects the compile failure. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27ARM: fix memblock breakageRussell King
Will says: | Commit e63075a3 removed the explicit MEMBLOCK_REAL_LIMIT #define | and introduced the requirement that arch code calls | memblock_set_current_limit to ensure that the __va macro can | be used on physical addresses returned from memblock_alloc. Unfortunately, ARM was missed out of this change. Fix this. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_typeTony Lindgren
Commit 5085f3ff458521045f7e43da62b8c30ea7df2e82 added better support for CONFIG_HOTPLUG_CPU by keeping proc_info around. However, depending on the Kconfig options selected, this can make the booting fail mysteriously early on. Turns out a data abort can happen in __lookup_processor in ldmia r5 {r3, r4}. When it happens the address loaded to r5 is not aligned. Fix the problem by aligning proc_info. Reported-by: Anand Gadiyar <gadiyar@ti.com> Tested-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interruptUwe Kleine-König
This fixes a build warning existing since at least 2.6.30: arch/arm/mach-ixp2000/core.c:217: warning: initialization from incompatible pointer type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27ARM: 6449/1: Fix for compiler warning of uninitialized variable.Marcelo Roberto Jimenez
ARM: mach-sa1100: Fix for compiler warning of uninitialized variable. This is a fix for the compiler warning: 'new_ppcr' may be used uninitialized in this function. Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27ARM: 6445/1: fixup TCM memory typesLinus Walleij
After Santosh's fixup of the generic MT_MEMORY and MT_MEMORY_NONCACHED I add this fix to the TCM memory types. The main change is that the ITCM memory is L_PTE_WRITE and DOMAIN_KERNEL which works just fine. The changed to the DTCM is just cosmetic to fit with surrounding code. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-26replace nested max/min macros with {max,min}3 macroHagen Paul Pfeifer
Use the new {max,min}3 macros to save some cycles and bytes on the stack. This patch substitutes trivial nested macros with their counterpart. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Joe Perches <joe@perches.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26mm: remove pte_*map_nested()Peter Zijlstra
Since we no longer need to provide KM_type, the whole pte_*map_nested() API is now redundant, remove it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26mm: stack based kmap_atomic()Peter Zijlstra
Keep the current interface but ignore the KM_type and use a stack based approach. The advantage is that we get rid of crappy code like: #define __KM_PTE \ (in_nmi() ? KM_NMI_PTE : \ in_irq() ? KM_IRQ_PTE : \ KM_PTE0) and in general can stop worrying about what context we're in and what kmap slots might be appropriate for that. The downside is that FRV kmap_atomic() gets more expensive. For now we use a CPP trick suggested by Andrew: #define kmap_atomic(page, args...) __kmap_atomic(page) to avoid having to touch all kmap_atomic() users in a single patch. [ not compiled on: - mn10300: the arch doesn't actually build with highmem to begin with ] [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c] Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Miller <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Airlie <airlied@linux.ie> Cc: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: power_supply: Makefile cleanup bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove() power_supply: Introduce maximum current property power_supply: Add types for USB chargers ds2782_battery: Fix units power_supply: Add driver for TWL4030/TPS65950 BCI charger bq20z75: Add support for more power supply properties wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove() jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove() ds2760_battery: Add missing kfree(di) in ds2760_battery_remove() olpc_battery: Fix endian neutral breakage for s16 values ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency pcf50633-charger: Add missing sysfs_remove_group() power_supply: Add driver for TI BQ20Z75 gas gauge IC wm831x_power: Remove duplicate chg mask omap: rx51: Add support for USB chargers power_supply: Add isp1704 charger detection driver
2010-10-26Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91: AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board AT91: pm: make sure that r0 is 0 when dealing with cache operations AT91: pm: use plain cpu_do_idle() for "wait for interrupt" AT91: reset: extend alternate reset procedure to several chips AT91: reset routine cleanup, remove not needed icache flush AT91: trivial: align comment of at91sam9g20_reset with one more tab AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet AT91: add board support for Pcontrol_G20
2010-10-26Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: OMAP: DSS2: don't power off a panel twice OMAP: DSS2: OMAPFB: Allow usage of def_vrfb only for omap2,3 OMAP: DSS2: OMAPFB: make VRFB depends on OMAP2,3 OMAP: DSS2: OMAPFB: Allow FB_OMAP2 to build without VRFB arm/omap: simplify conditional OMAP: DSS2: DSI: Remove extra iounmap in error path OMAP: DSS2: Use dss_features framework on DSS2 code OMAP: DSS2: Introduce dss_features files video/omap: remove mux.h include ARM: omap/fb: move get_fbmem_region() to .init.text ARM: omap/fb: move omapfb_reserve_sram to .init.text ARM: omap/fb: move omap_init_fb to .init.text OMAP: DSS2: OMAPFB: swap front and back porches for both hsync and vsync OMAP: DSS2: make filter coefficient tables human readable OMAP: DSS2: Add SPI dependency to Kconfig of ACX565AKM panel
2010-10-26ARM: imx: Add wake functionality to GPIODinh Nguyen
Add function definition for irq_chip.set_wake to enable GPIO to wake-up the system. This patch has been tested on a MX51 Babbage system that had suspend code implemented. The set_wake implementation is necessary for a GPIO to wake up a system from suspend. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26ARM: mx5: Add gpio-keys to mx51 babbage boardDinh Nguyen
Add functionality for the power button on MX51 Babbage board. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26ARM: imx: Add gpio-keys to plat-mxcDinh Nguyen
Add imx_add_gpio_keys function to add gpio-keys in plat-mxc Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26mx31_3ds: Fix spi registrationRogerio Pimentel
Commit (06606ff13) "ARM: imx: dynamically register spi_imx devices (imx31)" registered the wrong SPI port for mx31_3ds board. mx31_3ds uses SPI2 to connect to the MC13783 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26mx31_3ds: Fix the logic for detecting the debug boardRogerio Pimentel
The function mxc_expio_init returns 0 on success, so fix the logic for printing the error case. Also fixed the wording on the error message. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and boardNicolas Ferre
This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and board files. This also configures the DMA controller slave interface for at_hdmac dmaengine driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26AT91: pm: make sure that r0 is 0 when dealing with cache operationsNicolas Ferre
When using CP15 cache operations (c7), we make sure that Rd (r0) is actually 0 as ARM 926 TRM is saying. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26AT91: pm: use plain cpu_do_idle() for "wait for interrupt"Nicolas Ferre
For power management at91_pm_enter() routine, use the cpu_do_idle() for a rock solid "wait for interrupt" implementation. For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as we can access RAM even while in self-refresh mode. We keep plain access to CP15 for at91rm9200 as this feature is not available: instructions have to be in a single cache line. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26AT91: reset: extend alternate reset procedure to several chipsNicolas Ferre
Several at91sam9 chips need the alternate reset procedure to be sure to halt SDRAM smoothly before resetting the chip. This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips affected. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26AT91: reset routine cleanup, remove not needed icache flushNicolas Ferre
Generalize assembler reset routine to allow use on several at91sam9 chips. This patch replace double definitions of SDRAM controller registers and RSTC registers with use of classical header files. For this rework, we remove the not needed icache flush as it is already done in the calling function: arm_machine_restart(). Rename at91sam9g20_reset.S to generalize to several chips. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26AT91: trivial: align comment of at91sam9g20_reset with one more tabNicolas Ferre
Preparing next patch with longer names Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26AT91: Fix AT91SAM9G20 reset as per the errata in the data sheetPeter Horton
If the SDRAM is not cleanly shutdown before reset it can be left driving the bus, which then stops the bootloader booting from NAND. Signed-off-by: Peter Horton <phorton@bitbox.co.uk> [nicolas.ferre@atmel.com: change file header line order] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26AT91: add board support for Pcontrol_G20Peter Gsellmann
Board is a carrier board for Stamp9G20, with additional peripherals for a building automation system Signed-off-by: Peter Gsellmann <pgsellmann@portner-elektronik.at> [nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26ARM: ux500 specific L2 cache codePer Fransson
The generic version of l2x0_inv_all is only called just after disabling the L2 cache and is surrounded by a spinlock. However, we're not really turning off the L2 cache right now, and the PL310 does not support exclusive accesses (used to implement the spinlock). So, the invalidation needs to be done without the spinlock. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Hans-Juergen Koch <hjk@linutronix.de> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26ARM: l2x0: Optimise the range based operationsSantosh Shilimkar
For the big buffers which are in excess of cache size, the maintaince operations by PA are very slow. For such buffers the maintainace operations can be speeded up by using the WAY based method. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26ARM: l2x0: Determine the cache sizeSantosh Shilimkar
The cache size is needed for to optimise range based maintainance operations Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26ARM: l2x0: Fix coding-style in the cache-l2x0.hSantosh Shilimkar
Replace tab with space after #define to be consisten with other define in the file. Also move the bit mask below the register offsets. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26omap4: l2x0: Override the default l2x0_disableSantosh Shilimkar
The machine_kexec() calls outer_disable which can crash on OMAP4 becasue of trustzone restrictions. This patch overrides the default l2x0_disable with a OMAP4 specific implementation taking care of trustzone Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26arm: Implement l2x0 cache disable functionsThomas Gleixner
Add flush_all, inv_all and disable functions to the l2x0 code. These functions are called from kexec code to prevent random crashes in the new kernel. Platforms like OMAP which control L2 enable/disable via SMI mode can override the outer_cache.disable() function to implement their own. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26arm: Disable outer (L2) cache in kexecThomas Gleixner
kexec does not disable the outer cache before disabling the inner caches in cpu_proc_fin(). So L2 is enabled across the kexec jump. When the new kernel enables chaches again, it randomly crashes. Disabling L2 before calling cpu_proc_fin() cures the problem. Disabling L2 requires the following new functions: flush_all(), inv_all() and disable(). Add them to outer_cache_fns and call them from the kexec code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26ARM: Improve the L2 cache performance when PL310 is usedCatalin Marinas
With this L2 cache controller, the cache maintenance by PA and sync operations are atomic and do not require a "wait" loop. This patch conditionally defines the cache_wait() function. Since L2x0 cache controllers do not work with ARMv7 CPUs, the patch automatically enables CACHE_PL310 when only CPU_V7 is defined. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2010-10-26ARM: S5PV310: Support ethernet for SMDKV310 and SMDKC210Daein Moon
This patch adds to support ethernet for SMDKV310 and SMDKC210 board. - define smc911x resources - define configurations of smc911x platform data - define platform device "smsc911x" - initialize srom controller for lan9215 chip Signed-off-by: Daein Moon <moon9124@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-26mx31_3ds: Remove unused debug board definitionsRogerio Pimentel
In commit (c5d38f08): "mx31_3ds: revert 3ds debug board relate code" the debug board definitions are placed in a separate file. Remove the remaining debug board related define from mach-mx31_3ds.c. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-25Merge branch 'for-next' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-next' of git://android.git.kernel.org/kernel/tegra: spi: tegra: fix error setting on timeout spi: add spi_tegra driver tegra: harmony: enable PCI Express tegra: add PCI Express support tegra: add PCI Express clocks [ARM] tegra: Add APB DMA support [ARM] tegra: Add cpufreq support [ARM] tegra: common: Update common clock init table [ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups [ARM] tegra: Add support for reading fuses [ARM] tegra: gpio: Add suspend and wake support [ARM] tegra: pinmux: add safe values, move tegra2, add suspend [ARM] tegra: add suspend and mirror irqs to legacy controller [ARM] tegra: Add legacy irq support [ARM] tegra: update iomap
2010-10-26ARM: S5PV310: Add support SROMCDaein Moon
This patch adds support SROMC for S5PV310 and S5PC210. Signed-off-by: Daein Moon <moon9124@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-26ARM: SAMSUNG: Add the missed s3c_gpio_getpull() APIDaein Moon
This patch adds the s3c_gpio_getpull() API that has been missed in the plat-samsung/gpio-config.c and actullay there is its extern declaration in plat/gpio-cfg.h. Signed-off-by: Daein Moon <moon9124@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits) hwmon: lis3: Release resources in case of failure hwmon: lis3: Short explanations of platform data fields hwmon: lis3: Enhance lis3 selftest with IRQ line test hwmon: lis3: use block read to access data registers hwmon: lis3: Adjust fuzziness for 8 bit device hwmon: lis3: New parameters to platform data hwmon: lis3: restore axis enabled bits hwmon: lis3: Power on corrections hwmon: lis3: Update coordinates at polled device open hwmon: lis3: Cleanup interrupt handling hwmon: lis3: regulator control hwmon: lis3: pm_runtime support Kirkwood: add fan support for Network Space Max v2 hwmon: add generic GPIO fan driver hwmon: (coretemp) fix reading of microcode revision (v2) hwmon: ({core, pkg, via-cpu}temp) remove unnecessary CONFIG_HOTPLUG_CPU ifdefs hwmon: (pkgtemp) align driver initialization style with coretemp hwmon: LTC4261 Hardware monitoring driver hwmon: (lis3) add axes module parameter for custom axis-mapping hwmon: (hp_accel) Add HP Mini 510x family support ...
2010-10-25Kirkwood: add fan support for Network Space Max v2Simon Guinot
Signed-off-by: Simon Guinot <sguinot@lacie.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits) davinci: fix remaining board support after io_pgoffst removal davinci: mityomapl138: make file local data static arm/davinci: remove duplicated include davinci: Initial support for Omapl138-Hawkboard davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom davinci: add tnetv107x touchscreen platform device input: add driver for tnetv107x touchscreen controller davinci: add keypad config for tnetv107x evm board davinci: add tnetv107x keypad platform device input: add driver for tnetv107x on-chip keypad controller net: davinci_emac: cleanup unused cpdma code net: davinci_emac: switch to new cpdma layer net: davinci_emac: separate out cpdma code net: davinci_emac: cleanup unused mdio emac code omap: cleanup unused davinci mdio arch code davinci: cleanup mdio arch code and switch to phy_id net: davinci_emac: switch to new mdio omap: add mdio platform devices davinci: add mdio platform devices net: davinci_emac: separate out davinci mdio ... Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries added next to each other - one from the davinci merge, one from the input merge)
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-21 17:20:18 +0000