summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-03-08msm: iommu: Rework clock logic and add IOMMU bus clock controlStepan Moskovchenko
Clean up the clock control code in the probe calls, and add support for controlling the clock for the IOMMU bus interconnect. With the (proper) clock driver in place, the clock control logic in the probe function can be made much cleaner since it does not have to deal with the placeholder driver anymore. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Reviewed-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-03-08msm: iommu: Clock control for the IOMMU driverStepan Moskovchenko
Add clock control to the IOMMU driver. The IOMMU bus clock (and potentially an AXI clock) need to be on to gain access to IOMMU registers. Actively control these clocks when needed instead of leaving them on. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28msm: clock: Migrate to clkdevStephen Boyd
Migrating to clkdev has several advantages: * Less code in mach-msm/clock.c * A more robust clk_get() implementation * clk_add_alias() support * clk_get_sys() support In general, this will help board authors setup clock aliases and break the dependency on device pointers in the clock tables. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28msm: clock: Remove references to clk_ops_pcomStephen Boyd
Not all devices use proc_comm and determining if a clock is local vs. remote is fragile when done by comparing clk_ops pointers. Instead, implement an is_local() function for all clk_ops to determine if the clock is local. Doing this allows us to remove the last references to clk_ops_pcom from clock.c and compile it for targets with CONFIG_MSM_PROC_COMM=n. We don't need to set the clk_ops at runtime until 7x30 local clock detection comes in. Right now it's just complicating things so just set the ops pointer statically. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28msm: headsmp.S: Fix section mismatchStephen Boyd
WARNING: vmlinux.o(.cpuinit.text+0xc80): Section mismatch in reference from the function boot_secondary() to the variable .init.text:msm_secondary_startup The function __cpuinit boot_secondary() references a variable __init msm_secondary_startup. If msm_secondary_startup is only used by boot_secondary then annotate msm_secondary_startup with a matching annotation. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-28msm: Use explicit GPLv2 licensesDavid Brown
Replace a BSD-style license in Code Aurora Forum authored files with an explicit GPLv2. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-14Merge branch 'msm-core' into for-nextDavid Brown
* msm-core: msm: iommu: Enable IOMMU support for MSM8960 msm: iommu: Generalize platform data for multiple targets msm: iommu: Create a Kconfig item for the IOMMU driver
2011-02-14msm: iommu: Enable IOMMU support for MSM8960Stepan Moskovchenko
Allow IOMMU to be selected for MSM8960 now that the platform data has been generalized. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-14msm: iommu: Generalize platform data for multiple targetsStepan Moskovchenko
Make the IOMMU platform data target-independent in preparation for adding MSM8960 IOMMU support. The IOMMU configuration on MSM8x60 and MSM8960 is identical and the same platform data can be used for both. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-02-14msm: iommu: Create a Kconfig item for the IOMMU driverStepan Moskovchenko
Break the IOMMU driver out as a Kconfig item. Initially it was decided to always build this in for 8x60, but this driver is not strictly necessary and should be optionally selectable. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28Merge branch 'msm-core' into for-nextDavid Brown
* msm-core: msm: serial: Add MSM8960 serial support
2011-01-28msm: serial: Add MSM8960 serial supportStepan Moskovchenko
Add the device definitions and platform data to support the console serial port on MSM8960 Simulator and RUMI3 targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28Merge branch 'msm-core' into for-nextDavid Brown
* msm-core: msm: Clean up useless ifdefs msm: clock: Add support for more proc_comm clocks msm: clock: Invert debugfs directory layout msm: clock: Move debugfs code from clock.c to clock-debug.c msm: clock: Remove 7x30 and pcom includes from clock.h msm: clock: Remove unused code and definitions msm: Warning fix in trout gpio board file msm: Remove broken register definition from trout
2011-01-28msm: Clean up useless ifdefsStepan Moskovchenko
Remove ifdefs that do nothing, either from having the code between them previously removed, or from having been accidentally added to the wrong file. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Add support for more proc_comm clocksStephen Boyd
Add support for the ce, codec_ssbi, uart clocks, and i2c clocks. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Invert debugfs directory layoutStephen Boyd
There are currently 3 separate directories for clock debugging in debugfs: clk_enable, clk_rate, and clk_local. Each of these directories contains a list of clocks. This is rather annoying when you are focusing on one clock and want to enable/disable it and then check its rate. You either have to cd to the other directory or cat ../clk_rate/<clk>. Invert the layout so that there is one clock directory containing a directory for each clock. Inside each respective clock directory place an enable, rate, and is_local file relating to the clk_enable, clk_disable, and clk_local directories that exist today. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Move debugfs code from clock.c to clock-debug.cMatt Wagantall
The clock debugfs code is large enough, and easy enough to separate, that it deserves its own file which is compiled only when CONFIG_DEBUG_FS is enabled. Also, cleanup header file #includes that are no longer required. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Matt Wagantall <mattw@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Remove 7x30 and pcom includes from clock.hStephen Boyd
clock.h includes clock-pcom.h and clock-7x30.h when it really doesn't need to. Remove the includes and fixup breakages. Reviewed-By: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: clock: Remove unused code and definitionsStephen Boyd
This code is dead or otherwise useless so just remove it. Reviewed-by: Saravana Kannan <skannan@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: Warning fix in trout gpio board fileDavid Brown
arch/arm/mach-msm/board-trout-gpio.c: In function 'trout_gpio_to_irq': arch/arm/mach-msm/board-trout-gpio.c:77: error: unused variable 'msm_gpio' Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-28msm: Remove broken register definition from troutDavid Brown
Missed a register change with the clock cleanup on the MSM7x01 targets. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-26Merge branch 'msm-8960' into msm-coreDavid Brown
* msm-8960: msm: Support for the MSM8960 RUMI3 target msm: Support for the MSM8960 Simulator target msm: Makefile cleanup msm: timer: Timer support for MSM8960 msm: Add MSM 8960 cpu_is check msm: irqs-8960: Interrupt map for MSM8960 msm: Physical offset for MSM8960 msm: io: I/O register definitions for MSM8960 msm: Generalize QGIC registers msm: Generalize timer register mappings msm: Add CPU queries
2011-01-24Merge branch 'msm-sdcc' into for-nextDavid Brown
* msm-sdcc: msm: 8x50: Add initial support for SDCC mmc: msm_sdcc: Add gpio handling function to driver drivers: mmc: msm: remove clock disable in probe mmc: msm: fix dma usage not to use internal APIs
2011-01-24Merge branch 'msm-8960' into for-nextDavid Brown
* msm-8960: msm: Support for the MSM8960 RUMI3 target msm: Support for the MSM8960 Simulator target msm: Makefile cleanup msm: timer: Timer support for MSM8960 msm: Add MSM 8960 cpu_is check msm: irqs-8960: Interrupt map for MSM8960 msm: Physical offset for MSM8960 msm: io: I/O register definitions for MSM8960 msm: Generalize QGIC registers msm: Generalize timer register mappings msm: Add CPU queries
2011-01-24Merge branch 'msm-uart' into for-nextDavid Brown
* msm-uart: serial: msm: Add support for UARTDM cores msm: Add name field to UART resources
2011-01-24ARM: msm: 7x30: don't force a gpiomux table for the whole archDima Zavin
This is completely board specific and therefore must be provided on a per-board basis. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: 8x50: Add initial support for SDCCSahitya Tummala
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
2011-01-21mmc: msm_sdcc: Add gpio handling function to driverSahitya Tummala
Configure SDCC GPIOs when the host is powered up or powered off. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
2011-01-21msm: Add name field to UART resourcesStepan Moskovchenko
Add a name field to the I/O resources for the UARTs on MSM targets in preparation for updates to the msm_serial driver. The driver assumed there is one I/O resource per UART, which is not the case on all targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Support for the MSM8960 RUMI3 targetStepan Moskovchenko
Add the machine record, init code, and build support for the MSM8960 RUMI3. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Support for the MSM8960 Simulator targetStepan Moskovchenko
Add the board file, Kconfig options, and Makefile options needed to build for the MSM8960 Simulator target. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Makefile cleanupStepan Moskovchenko
Clean up some of the conditionals in the Makefile in preparation for adding build support for MSM8960. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: timer: Timer support for MSM8960Stepan Moskovchenko
Modify the macros in the MSM timer driver to support the MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Add MSM 8960 cpu_is checkDavid Brown
Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: irqs-8960: Interrupt map for MSM8960Stepan Moskovchenko
Add the interrupt map for the Qualcomm MSM8960 chip. This chip has an interrupt map that is different from previous targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Physical offset for MSM8960Stepan Moskovchenko
Add the physical memory offset value for the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: io: I/O register definitions for MSM8960Stepan Moskovchenko
Add the register address definitions for the basic hardware blocks on the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Generalize QGIC registersDavid Brown
The QGIC registers are mapped to the same virtual addresses across targets, only the physical address changes. Move the BASE address out of target-specific files, and add a SOC name to the base addresses. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Generalize timer register mappingsDavid Brown
Allow the timer register to be determined dynamically instead of at compile time. Use common virtual addresses for the registers across all MSM chips, and select the register mappings based on the detected CPU. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-21msm: Add CPU queriesDavid Brown
Create runtime queries to distinguish the various MSM targets. Although these would probably be better named soc_is..., use cpu_is... to match convention in the rest of the kernel. Hard code the tests based on config options for now. When runtime device detection is implemented, these can be made dynamic. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-20Merge branch 'akpm'Linus Torvalds
* akpm: kernel/smp.c: consolidate writes in smp_call_function_interrupt() kernel/smp.c: fix smp_call_function_many() SMP race memcg: correctly order reading PCG_USED and pc->mem_cgroup backlight: fix 88pm860x_bl macro collision drivers/leds/ledtrig-gpio.c: make output match input, tighten input checking MAINTAINERS: update Atmel AT91 entry mm: fix truncate_setsize() comment memcg: fix rmdir, force_empty with THP memcg: fix LRU accounting with THP memcg: fix USED bit handling at uncharge in THP memcg: modify accounting function for supporting THP better fs/direct-io.c: don't try to allocate more than BIO_MAX_PAGES in a bio mm: compaction: prevent division-by-zero during user-requested compaction mm/vmscan.c: remove duplicate include of compaction.h memblock: fix memblock_is_region_memory() thp: keep highpte mapped until it is no longer needed kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20Merge branch 'for-38-rc2' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'for-38-rc2' of git://codeaurora.org/quic/kernel/davidb/linux-msm: msm: qsd8x50: Platform data isn't init data
2011-01-18ARM: S5PV310: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5PV210: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6450: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6440: Add missing virtual ASoC DMA deviceJassi Brar
Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-18ARM: S5P6442: Enable I2S device to work on SMDK6442Jassi Brar
Add missing virtual ASoC DMA device. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> [kgene.kim@samsung.com: minor changed title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-01-17Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (59 commits) mtd: mtdpart: disallow reading OOB past the end of the partition mtd: pxa3xx_nand: NULL dereference in pxa3xx_nand_probe UBI: use mtd->writebufsize to set minimal I/O unit size mtd: initialize writebufsize in the MTD object of a partition mtd: onenand: add mtd->writebufsize initialization mtd: nand: add mtd->writebufsize initialization mtd: cfi: add writebufsize initialization mtd: add writebufsize field to mtd_info struct mtd: OneNAND: OMAP2/3: prevent regulator sleeping while OneNAND is in use mtd: OneNAND: add enable / disable methods to onenand_chip mtd: m25p80: Fix JEDEC ID for AT26DF321 mtd: txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) mtd: cfi_cmdset_0002: add support for Samsung K8D3x16UxC NOR chips mtd: cfi_cmdset_0002: add support for Samsung K8D6x16UxM NOR chips mtd: nand: ams-delta: drop omap_read/write, use ioremap mtd: m25p80: add debugging trace in sst_write mtd: nand: ams-delta: select for built-in by default mtd: OneNAND: lighten scary initial bad block messages mtd: OneNAND: OMAP2/3: add support for command line partitioning mtd: nand: rearrange ONFI revision checking, add ONFI 2.3 ... Fix up trivial conflict in drivers/mtd/Kconfig as per DavidW.
2011-01-17Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (63 commits) ARM: PL08x: cleanup comments Update CONFIG_MD_RAID6_PQ to CONFIG_RAID6_PQ in drivers/dma/iop-adma.c ARM: PL08x: fix a warning Fix dmaengine_submit() return type dmaengine: at_hdmac: fix race while monitoring channel status dmaengine: at_hdmac: flags located in first descriptor dmaengine: at_hdmac: use subsys_initcall instead of module_init dmaengine: at_hdmac: no need set ACK in new descriptor dmaengine: at_hdmac: trivial add precision to unmapping comment dmaengine: at_hdmac: use dma_address to program DMA hardware pch_dma: support new device ML7213 IOH ARM: PL08x: prevent dma_set_runtime_config() reconfiguring memcpy channels ARM: PL08x: allow dma_set_runtime_config() to return errors ARM: PL08x: fix locking between prepare function and submit function ARM: PL08x: introduce 'phychan_hold' to hold on to physical channels ARM: PL08x: put txd's on the pending list in pl08x_tx_submit() ARM: PL08x: rename 'desc_list' as 'pend_list' ARM: PL08x: implement unmapping of memcpy buffers ARM: PL08x: store prep_* flags in async_tx structure ARM: PL08x: shrink srcbus/dstbus in txd structure ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 01:43:40 +0000