summaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)Author
2015-01-21Merge tag 'renesas-soc2-for-v3.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc Merge "Second Round of Renesas ARM Based SoC Updates for v3.20" from Simon Horman: * Add DT support for PM domains * tag 'renesas-soc2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: R-Mobile: Add DT support for PM domains ARM: shmobile: R-Mobile: Store SYSC base address in rmobile_pm_domain ARM: shmobile: R-Mobile: Use generic_pm_domain.attach_dev() for pm_clk setup Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'renesas-dt2-for-v3.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Second Round of Renesas ARM Based SoC DT Updates for v3.20" from Simon Horman: * Support Renesas memory controllers * Add SRC interrupt number on r8a779~ and r8a7791 SoCs * Fix MSTP8 input clocks on r8a7791 SoC * Add PM domain support to r8a7740 * Add DT bindings for the R-Mobile System Controller * Use Add sh73a0-specific FSI2 compatible property * tag 'renesas-dt2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: PM / Domains: R-Mobile SYSC: Document SH-Mobile AG5 (sh73a0) binding ARM: shmobile: sh73a0 dtsi: Add memory-controller nodes ARM: shmobile: r8a7740 dtsi: Add memory-controller node ARM: shmobile: r8a73a4 dtsi: Add memory-controller nodes ARM: shmobile: Add DT bindings for Renesas memory controllers ARM: shmobile: r8a7791: add SRC interrupt number on DTSI ARM: shmobile: r8a7790: add SRC interrupt number on DTSI ARM: shmobile: r8a7791: fix MSTP8 input clocks ARM: shmobile: r8a7740 dtsi: Add PM domain support PM / Domains: Add DT bindings for the R-Mobile System Controller ARM: shmobile: sh73a0 dtsi: Add SoC-specific FSI2 compatible property Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'for-v3.20/omap-hwmod-a' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.20/fixes-not-urgent ARM: OMAP2+: hwmod: first set of patches for v3.20 First set of OMAP2+ hwmod patches for Linux v3.20. These are mostly fixes for warnings, although there's one DRA7xx patch that fixes CONFIG_DEBUG_LL for AM572x/DRA7xx SoCs that use UART3 for console, such as the BeagleBoard-X15. These patches entered Linux-next starting with the next-20150121 tag. Basic build, boot, and PM test results can be found here: http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v3.20/20150121142621/
2015-01-21Merge tag 'omap-for-v3.20/dt-pt1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap device tree changes for v3.20" from Tony Lindgren: Device tree changes for omaps. Mostly to add support for new am437x-idk and update am437x-sk boards. Also enabling new devices for multiple boards. * tag 'omap-for-v3.20/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits) ARM: dts: omap3-gta04: Add handling for tv output ARM: dts: cm-t3x: add NAND support ARM: dts: am57xx-beagle-x15: Add GPIO controlled fan node ARM: dts: am437x-idk: add gpio-based power key ARM: dts: N950/N9: add twl_power ARM: dts: am437x-sk: add power button binding ARM: dts: add support for AM437x IDK ARM: dts: am437x-gp-evm: add VPFE device tree data ARM: dts: am437x-sk-evm: add VPFE device tree data ARM: dts: am43x-epos-evm: add VPFE device tree data ARM: dts: am4372: add VPFE DT node entries ARM: dts: DRA7X: drop id property in pcie_phy ARM: dts: omap3-n900: cleanup english ARM: dts: am57xx-beagle-x15: Add dual ethernet ARM: dts: am437x-sk: remove DSS pulls ARM: dts: am437x-sk: remove internal i2c pullups ARM: dts: am437x-sk: add explicit pinmux for both USB instances ARM: dts: am437x-sk: remove ethernet pulls ARM: dts: am437x-sk: add explicit MMC0 pinmux ARM: dts: am437x-sk: remove internal pulls from QSPI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'omap-for-v3.20/cleanup-pt1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup Merge "omap clean-up for v3.20" from Tony Lindgren: Clean-up for omaps to remove dead code found with cppcheck after we've made several SoCs to boot in device tree only mode. * tag 'omap-for-v3.20/cleanup-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove unused ti81xx platform init code ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers ARM: OMAP2: CM: remove unused PLL functions ARM: OMAP2: clock: remove unused apll code ARM: OMAP: dma.c: Remove unused function ARM: OMAP1: timer32k.c: Remove unused function ARM: OMAP1: irq.c: Remove unused function ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions ARM: OMAP2+: voltage: Remove some unused functions ARM: OMAP2+: powerdomain.c: Remove some unused functions ARM: OMAP2+: omap_hwmod.c: Remove some unused functions ARM: OMAP2+: dpll44xx.c: Remove unused function ARM: OMAP2+: cm33xx.c: Remove some unused functions ARM: OMAP2+: clkt2xxx_apll.c: Remove some unused functions Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'omap-for-v3.20/fixes-not-urgent-pt1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical Merge "omap non-urgent fixes for v3.20" from Tony Lindgren: Non-urgent fixes for omap variant dm816x that has been in a sorry broken half merged state for a few years now. This gets us to the point where we can boot it properly once the related SoC data is added. Note that we've already made dm816x device tree only by removing the known broken board file. * tag 'omap-for-v3.20/fixes-not-urgent-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Disable omap3 PM init for ti81xx ARM: OMAP2+: Fix reboot for 81xx ARM: OMAP2+: Fix dm814 and dm816 for clocks and timer init ARM: OMAP2+: Fix ti81xx class type ARM: OMAP2+: Fix ti81xx devtype ARM: OMAP2+: Fix error handling for omap2_clk_enable_init_clocks Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'sti-defconfig-for-v3.20-1' of ↵Olof Johansson
git://git.stlinux.com/devel/kernel/linux-sti into next/defconfig Merge "STi defconfig for v3.20, round 1" from Maxime Coquelin: Highlights: ----------- - Enable STiH407 USB PicoPHY in multi_v7_defconfig - Enable MiPHY28lp driver in multi_v7_defconfig * tag 'sti-defconfig-for-v3.20-1' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY ARM: multi_v7_defconfig: Enable stih407 usb picophy Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: mvebu: make DTS comments reflect DEBUG_LL changesPaul Bolle
The Kconfig symbol DEBUG_MVEBU_UART_ALTERNATE was renamed to DEBUG_MVEBU_UART0_ALTERNATE. And the symbol DEBUG_MVEBU_UART1_ALTERNATE was added to allow UART1 as a DEBUG_LL target. Make the comment at the top of this DTS reflect those changes. Since we're touching this DTS add comments to show which blocks describe UART0 and UART1. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-21ARM: mvebu: Armada 385 GP: Add regulators to the SATA portGregory CLEMENT
Add the regulators to each SATA port. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-01-21ARM: Kirkwood: Added support for pogoplug e02 (pink/gray)Christoph Junghans
The pogoplug differs from the SheevaPlug only by a few details, but especially in the led assignments. This patch was tested under Gentoo Linux and is based on dts files from Arch Linux ARM and OpenWrt. Suggested-by: Felix Kaechele <heffer@fedoraproject.org> Suggested-by: Oleg Rakhmanov <moonman.ca@gmail.com> Signed-off-by: Christoph Junghans <ottxor@gentoo.org> [Andrew Lunn <andrew@lunn.ch>: Fixed subject line] Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2015-01-21Merge tag 'sti-dt-for-v3.20-1' of ↵Olof Johansson
git://git.stlinux.com/devel/kernel/linux-sti into next/dt Merge "STi DT updates for v3.20, round 1" from Maxime Coquelin: Highlights: ----------- - Add USB support for STiH410 & STiH407 - Add DRM DT nodes for STiH410 & STiH407 - Add STiH418 SoC support - Add DT nodes for MiPHY28lp PHY * tag 'sti-dt-for-v3.20-1' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: DT: STi: STiH407: Add DT node for MiPHY28lp ARM: dts: STiH418: Add B2199 board support ARM: dts: Add STiH418 SoC support ARM: DT: STiH410: Add DRM dt nodes ARM: DT: STiH407: Add DRM dt nodes ARM: STi: DT: STiH410: Add DT nodes for the ehci and ohci usb controllers. ARM: STi: DT: STiH410: Add usb2 picophy dt nodes ARM: STi: DT: STiH407: Add usb2 picophy dt nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'sti-soc-for-v3.20-1' of ↵Olof Johansson
git://git.stlinux.com/devel/kernel/linux-sti into next/soc Merge "ARM: STi: SoC changes for v3.20, round 1" from Maxime Coquelin: Highlights: ----------- - Add support for STiH418 SoC * tag 'sti-soc-for-v3.20-1' of git://git.stlinux.com/devel/kernel/linux-sti: ARM: STi: Add STiH418 SoC support Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'at91-cleanup2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/soc Merge "at91: cleanup for 3.20 #2" from Nicolas Ferre: Second batch of cleanup for 3.20: - By reworking the PM code, we can remove the AT91 more specific initialization - We are using DT for SRAM initialization now, so we can remove its explicit mapping - The PMC clock driver now hosts IDLE function for at91rm9200 with other SoCs ones. * tag 'at91-cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (37 commits) ARM: at91: move at91rm9200_idle() to clk/at91/pmc.c ARM: at91: remove unused at91_init_sram ARM: at91: sama5d4: remove useless call to at91_init_sram ARM: at91: remove useless map_io ARM: at91: pm: prepare for multiplatform ARM: at91: pm: add UDP and UHP checks to newer SoCs ARM: at91: pm: use the mmio-sram pool to access SRAM ARM: at91: pm: rework cpu detection ARM: at91: dts: sama5d3: add ov2640 camera sensor support ARM: at91: dts: sama5d3: change name of pinctrl of ISI_MCK ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset} ARM: at91: dts: sama5d3: move the isi mck pin to mb ARM: at91: dts: sama5d3: add missing pins of isi ARM: at91: dts: sama5d3: split isi pinctrl ARM: at91: dts: sama5d3: add isi clock ARM: at91/dt: ethernut5: use at91sam9xe.dtsi ARM: at91/dt: Add a dtsi for at91sam9xe ARM: at91/dt: add SRAM nodes ARM: at91/dt: at91rm9200ek: enable RTC ARM: at91/dt: rm9200: add RTC node ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'renesas-defconfig2-for-v3.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Merge "Second Round of Renesas ARM Based SoC Defconfig Updates for v3.20" from Simon Horman: Second Round of Renesas ARM Based SoC Defconfig Updates for v3.20 * Enable kzm9g board in multiplatform defconfig * tag 'renesas-defconfig2-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Enable kzm9g board in multiplatform defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: dts: Add hip01-ca9x2 dts fileWang Long
Add dts file for Hisilicon hip01 ca9x2 board Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> [olof: Folded in smp enable-method from a different patch] Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: hisi: enable smp for HiP01Wang Long
Enable smp for HiP01 board. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> [olof: split off the dts change to a separate commit] Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: hisi: rename secondary_startup functionWang Long
As hix5hd2 and hip01 has the same secondary_startup so rename hix5hd2_secondary_startup to to hisi_secondary_startup. the hip01 will use hisi_secondary_startup for the secondary core boot. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: hisi: rename smp_prepares_cpus functionWang Long
As hix5hd2 and hip01 has the same .smp_prepare_cpus in struct smp_operations, so rename hix5hd2_smp_prepare_cpus to hisi_common_smp_prepare_cpus. the hip01 will use hisi_common_smp_prepare_cpus in its struct smp_operations. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: config: enable ARCH_HIP01Wang Long
Make hip01 share the hisi_defconfig. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: hisi: enable HiP01 SoCWang Long
Enable Hisilicon HiP01 SoC. This HiP01 SoC series support both one core or dual cores and quad cores. The core is Cortex A9. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: debug: add HiP01 debug uartWang Long
Add the support of Hisilicon HiP01 debug uart. The uart of hip01 is 8250 compatible. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'new-atlas7mach-for-3.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/soc Merge "CSR new atlas7 machine, and delete old marco machine for 3.20" from Barry Song: drop CSR Marco machine and add Atlas7 new machine This is the init support for CSR Atlas7 new SoC. Old Marco has never shipped to customers and been dropped. * tag 'new-atlas7mach-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: sirf: add Atlas7 machine support ARM: sirf: move to debug_ll_io_init and drop map_io ARM: sirf: move platsmp to support Atlas7 SoC ARM: sirf: drop Marco machine ARM: sirf: drop Marco support in reset controller module Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21Merge tag 'atlas7-lldebug-for-3.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux into next/soc Merge "CSR atlas7 debug ports for 3.20" from Barry Song: add debug ports for CSRatlas7 SoC Because Marco chip has never shipped to customers and has been replaced by Atlas7, so we do the below - drop Marco's debug port - add debug ports for Atlas7 * tag 'atlas7-lldebug-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux: ARM: sirf: add two debug ports for CSRatlas7 SoC ARM: sirf: drop Marco low-level debug port Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-21ARM: rockchip: remove cpu-core name from machine nameHeiko Stuebner
The Rockchip support is not limited to Cortex-A9 socs anymore and its presence may confuse people reading /proc/cpuinfo. So remove the core specific part. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2015-01-21ARM: 8291/1: replace magic number with PAGE_SHIFT macro in fixup_pv codeMasahiro Yamada
This line converts PHYS_OFFSET into PHYS_PFN_OFFSET. It is better to use PAGE_SHIFT rather than the magic number 12. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8290/1: decompressor: fix a wrong commentMasahiro Yamada
This comment does not correspond to the actual code. When zImage is loaded at a lower *OR* higher address of the destination of Image, it won't overwrite itself. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8286/1: mm: Fix dma_contiguous_reserve commentGeorge G. Davis
DMA contiguous allocations have been able to use highmem since commit "95b0e65 ARM: mm: don't limit default CMA region only to low memory" but a comment still notes the earlier "low memory" limitation. Update the comment to remove the low memory limitation and fix the s/contigouos/contiguous/ typo while we're at it. Signed-off-by: George G. Davis <george_davis@mentor.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8248/1: pm: remove outdated commentBrian Norris
As of commit abda1bd5f4e04054ce083c298fcd68a743e9df03 __cpu_suspend() takes only 2 arguments, and those arguments are passed by the platform code. This comment thus makes no sense, as cpu_suspend() is not actually hiding any arguments. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8292/1: mm: fix size rounding-down of arm_add_memory() functionMasahiro Yamada
The current rounding of "size" is wrong: - If "start" is sufficiently near the next page boundary, "size" is decremented by more than enough and the last page is lost. - If "size" is sufficiently small, it is wrapped around and gets a bogus value. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8274/1: Fix DEBUG_LL for multi-platform kernels (without PL01X)Daniel Thompson
When building a multi_v7_defconfig kernel it is not possible to configure DEBUG_LL to use any serial device except a ARM Primecell PL01X, or more accurately and worse, it is possible to configure a different serial device but KConfig does not honour this request. In fact this also overrides the user selection for some of the single platform kernels, for example I don't think DEBUG_LL can be targeted at ICE or semihosted supervisor for ARCH_VERSATILE. This happens because DEBUG_UART_PL01X is automatically enabled by some architectures and this means user decisions made regarding the DEBUG_LL backend will be overridden. Problem is fixed by removing the automatic enabling of this option. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8273/1: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XXDaniel Thompson
On EP93XX uncompress.h uses CONFIG_DEBUG_UART_PHYS instead of a hard coded serial port. This means the build breaks when DEBUG_LL (and DEBUG_LL_UART_PL01X) is not enabled. This is fixed by adding a new dependency. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8272/1: netx: Migrate DEBUG_LL macros to shared directoryDaniel Thompson
As part of the migration we introduce DEBUG_UART_PHYS/DEBUG_UART_VIRT which default to UART1 but allow a user to configure UART2 or UART3. We also introduce symbolic names for the registers and flags. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8271/1: omap1: Migrate debug_ll macros to use 8250.SDaniel Thompson
The omap1's debug-macro.S is similar to the generic 8250 code. Compared to the 8520 code the omap1 macro automatically determines what UART to use based on breadcrumbs left by the bootloader and automatically copes with the eccentric register layout on OMAP7XX. This patch drops both these features and relies instead on the generic 8250 macros: 1. Dropping support for the bootloader breadcrumbs is identical to the way the migration was handled for OMAP2 (see 808b7e07464d...). 2. Support for OMAP7XX still exists but it must be configured by hand (DEBUG_OMAP7XXUART1/2/3) rather than handled at runtime. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Cc: linux-omap@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8270/1: ks8695: Migrate debug_ll macros to shared directoryDaniel Thompson
As part of the migration a couple of uart definitions have been copied from of the platform specific header files. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8269/1: Remove DEBUG_LL_UART_NONEDaniel Thompson
Only a very small handful of platforms support DEBUG_LL_UART_NONE but it lurks in the menus of every single platform config ready to break the build. This is an especial problem for defconfig/oldconfig since it is often selected by default. This patch solves the problem by removing this option. Any platforms still depending upon this option must be migrated. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8268/1: configs: Enable DEBUG_LL_UART_8250 where neededDaniel Thompson
All defconfigs touched by this patch already enable DEBUG_LL and by default DEBUG_LL_UART_NONE will be selected. This causes no issues today because due to some back compatibility magic we eventually need to remove it is not actually honoured. Nevertheless DEBUG_LL_UART_8250 is the right value for these platforms and should be set in the config files. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: 8267/1: cnx3xxx: Remove spurious default for DEBUG_CNS3xxxDaniel Thompson
The default value for DEBUG_CNS3xxx appears twice. This patch removes the one with the wrong sort order. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-21ARM: dts: sun4i: Add Marsboard A10 boardAleksei Mamlin
This patch add support for Marsboard A10 board. The Marsboard A10 is a A10 based development board with 1G RAM, 1G NAND, micro SD card slot, SATA 2.0 socket, 10/100 ethernet, mini HDMI port, 1 USB OTG port and 2 USB 2.0 ports. Board does not use the AXP209 pmic, it does not have a pmic at all. Board also have 2 expansion 70 pin headers. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun9i: Enable mmc2 on A80 Optimus BoardChen-Yu Tsai
The A80 Optimus Board has a 16GB eMMC connected to mmc2, with 8 bit wide data bus. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2Chen-Yu Tsai
mmc2 is available on port C. Add a pinmux setting for 8 bit wide eMMC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun9i: Enable mmc0 on A80 Optimus BoardChen-Yu Tsai
Enable the micro-sd slot on the A80 Optimus Board, which is connected to mmc0. This adds the card-detect gpio and enables mmc0. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun9i: Convert a80 optimus board dts to label referencingChen-Yu Tsai
The preferred method of referencing nodes from the dtsi is to use labels, instead of copying the complete tree. This patch converts sun9i-a80-optimus.dts to use label references. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsiChen-Yu Tsai
The A80 has 4 mmc controllers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun9i: Add mmc config clock nodesChen-Yu Tsai
Add the device tree nodes for the mmc config clock nodes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sunxi: Add missing mdio labelAleksei Mamlin
This patch add missing mdio label for sun[457]i. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun5i: Add mk802_a10s boardHans de Goede
The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and a sdio realtek wifi chip. Unlike the original mk802 it does have a pmic, the axp152. For more details see: http://linux-sunxi.org/Semitime_g2 Signed-off-by: Hans de Goede <hdegoede@redhat.com> [Maxime: Changed the compatible and node names labels] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun4i: Add mk802ii boardHans de Goede
The mk802ii is a revised version of the mk802 A10 based hdmi tv-stick, it features 1G RAM, 4G nand, a hdmi male connector, USB-A receptacle, 2 micro usb receptacles (OTG & power) and USB-wifi, and does come with an axp209 pmic. For more details see: http://linux-sunxi.org/Rikomagic_mk802ii Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun4i: Add mk802 boardHans de Goede
The mk802 is the "classic" Allwinner A10 based hdmi tv-stick, it features 512M or 1G RAM, 4G nand, a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG) and USB-wifi. Somewhat unique the mk802 does not use the AXP209 pmic, it does not have a pmic at all. For more details see: http://linux-sunxi.org/Rikomagic_mk802 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tabletHans de Goede
The Chuwi V7 is an A10 (sun4i) based tablet with 1G of RAM, 16G of nand flash, microsd slot, 7" 1024x768 lvds ips panel, mini hdmi out, headphones out, stereo speakers, front & back camera and usb wifi. It is clearly marked "CHUWI", "V7" and "Model: CW0825" on the back of the tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: dts: sun7i: Add dts file for Bananapro boardHans de Goede
Add support for the new Bananapro A20 development board from lemaker.org. This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, 3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 12:51:55 +0000