summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-common
AgeCommit message (Collapse)Author
2008-04-25[Blackfin] arch: Functional power management support: Add support for cpu ↵Michael Hennerich
frequency scaling Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: Remove the circular buffering mechanism for exceptionsBernd Schmidt
Remove the circular buffering mechanism for exceptions. Instead, point RETX at a safe location from which to fetch three NOPs. This safe location is now in the fixed code area, and also used for certain anomaly workarounds, to ensure that user space can find a valid ICPLB when things are built with CONFIG_MPU. Also, save I/DCPLB_FAULT_ADDRESS when lowering to level 5, since the hardware reg is valid only at exception level. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: Allow concurrent use of GPIO and GPIO IRQMichael Hennerich
The irq setup code no longer calls gpio request and free. This patch also changes the default gpio_free behavior on Blackfin. A freed GPIO keeps it's last state, and is not defaulted back to an input. This is also what all other architectures do. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-25[Blackfin] arch: detect the memory available in the system on the fly by defaultMike Frysinger
detect the memory available in the system on the fly by default rather than forcing people to set this manually in the kconfig Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-24[Blackfin] arch: make the mask explicit rather than writing a negative ↵Mike Frysinger
number in hex Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: __FUNCTION__ is gcc-specific, use __func__Harvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-04-23[Blackfin] arch: fix bug - when using trace buffer with CONFIG_MPU enabled.Bernd Schmidt
There were a couple of problems with the way the trace buffer state is saved/restored in assembly. The DEBUG_HWTRACE_SAVE/RESTORE macros save a value to the stack, which is not immediately obvious; the CPLB exception code needed changes to load the correct value of the stack pointer. The other problem is that the SAVE/RESTORE macros weren't pushing and popping the value downwards on the stack, but rather moving it _upwards_, which is of course completely broken. We also need to make sure there's a matching DEBUG_HWTRACE_RESTORE in the error case of the CPLB handler. Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-03-06[Blackfin] arch: to kill syscalls missing warning by adding new timerfd syscallsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Fix CONFIG_PM support for BF561Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Remove DPMC char driver optionMichael Hennerich
Remove redundant/obsolete/dead code from DPMC driver Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: Cleanup abd Simplify:Michael Hennerich
- Simplify init_arch_irq - Make code more readable - Remove useless SSYNCs - Fix comments Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: fix bug - linux-2.6.24 (delayed) disable IRQ feature not ↵Michael Hennerich
functional for handle_simple_irq Bypass delayed disable feature by implementing chip->disable and chip->enable. http://lkml.org/lkml/2008/2/19/115 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-25[Blackfin] arch: fix bug - Move IWR Enable All to the end of init_arch_irq ↵Michael Hennerich
otherwise it fails Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-02[Blackfin] arch:Fix BUG [#3876] pfbutton test for BTN3 on bf533 don't show ↵Michael Hennerich
complete info - Buttons on the BF533-STAMP board are not inverted - Fix spurious GPIO Interrupt caused during set irq_type for edge triggered interrupts Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-02[Blackfin] arch: change the trace buffer control start/stop logic in the ↵Mike Frysinger
exception handlers To save/restore the trace buffer control so that if we take an exception after turning off the trace buffer at a higher level we dont inadvertently turn the trace buffer back on Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: hook up set_irq_wake in Blackfin's irq codeMichael Hennerich
- Add support for irq_wake on system and gpio interrupts - Remove outdated kernel options - Add option to select default PM mode - Fix various places where SIC_IWRx was only handled partially Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-09[Blackfin] arch: Merge BF561 support into ints-priorityMichael Hennerich
Merge single core ints-priority-sc.c and dual core ints-priority-dc.c into one common code ints-priority.c Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-02-05timerfd: new timerfd APIDavide Libenzi
This is the new timerfd API as it is implemented by the following patch: int timerfd_create(int clockid, int flags); int timerfd_settime(int ufd, int flags, const struct itimerspec *utmr, struct itimerspec *otmr); int timerfd_gettime(int ufd, struct itimerspec *otmr); The timerfd_create() API creates an un-programmed timerfd fd. The "clockid" parameter can be either CLOCK_MONOTONIC or CLOCK_REALTIME. The timerfd_settime() API give new settings by the timerfd fd, by optionally retrieving the previous expiration time (in case the "otmr" parameter is not NULL). The time value specified in "utmr" is absolute, if the TFD_TIMER_ABSTIME bit is set in the "flags" parameter. Otherwise it's a relative time. The timerfd_gettime() API returns the next expiration time of the timer, or {0, 0} if the timerfd has not been set yet. Like the previous timerfd API implementation, read(2) and poll(2) are supported (with the same interface). Here's a simple test program I used to exercise the new timerfd APIs: http://www.xmailserver.org/timerfd-test2.c [akpm@linux-foundation.org: coding-style cleanups] [akpm@linux-foundation.org: fix ia64 build] [akpm@linux-foundation.org: fix m68k build] [akpm@linux-foundation.org: fix mips build] [akpm@linux-foundation.org: fix alpha, arm, blackfin, cris, m68k, s390, sparc and sparc64 builds] [heiko.carstens@de.ibm.com: fix s390] [akpm@linux-foundation.org: fix powerpc build] [akpm@linux-foundation.org: fix sparc64 more] Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-27[Blackfin] arch: Add the semtimedop syscall. Upstream uClibc doesn't ↵Bernd Schmidt
compile without it. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Initial checkin of the memory protection support.Bernd Schmidt
Enable it with CONFIG_MPU. Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-11[Blackfin] arch: Add some comments - fix semicolonsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-11[Blackfin] arch: move all code related to CPLB handling into a new ↵Bernd Schmidt
subdirectory under kernel/ Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Enable both edge triggered GPIO IRQs on BF54x and use ↵Michael Hennerich
irq_to_gpio() Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: append IRQ Number to label stringMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23[Blackfin] arch: Fix bug to Enable kernel to build for bf548 with PM.Sonic Zhang
On BF548-EZKIT, build kernel faills with power management, video and audio enabled. This patch fix this. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: Let the pre-processor do the math to save a few cycles - no ↵Robin Getz
functional changes Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: do not use fixed numbers to describe offsets - no ↵Robin Getz
functional changes Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: do not use hard coded addressesRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: fix bug - trap_tests fails to recover on some tests.Robin Getz
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719 When the CPLBs get a miss, we do: - find a victim in the HW table - remove the victim - find the replacement in the software table - put it into the HW table. If we can't find a replacement in the software table, we accidently leave a duplicate in the HW table. This patch ensures that duplicate is marked as not valid. What we should do is find the replacement in the software table, before we find a victim in the HW table - but its too late in the release cycle to do that much restructuring of this code. Rather that duplicate code, connect Hardware Errors (irq5) into trap_c, so user space processes get killed properly. The rest of irq_panic() can be moved into traps.c (later) There is still a small corner case that causes problems when a pheriperal interrupt goes off a single cycle before a user space hardware error. This causes a kernel panic, rather than the user space process being killed. But, this checkin makes things work in 99.9% of the cases, and is a vast improvement from what is there today (which fails 100% of the time). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Add a note describing what is going on - no functional changesRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: split apart dump_bfin_regs and merge/remove show_regs from ↵Mike Frysinger
process.c, which was largely duplicated Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: use common __INIT/__FINIT defines rather than setting the ↵Mike Frysinger
.section ourselves to .init.text Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: Ensure we printk out strings with the proper loglevelRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: Need to specify ax with the .init.text section,Bernd Schmidt
Need to specify "ax" with the .init.text section, otherwise the linker will make unique .init.text.1 .. .init.text.3 sections to cope with the flags
2007-11-21Blackfin arch: Fix typo, and add ENDPROC - no functional changesMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-21Blackfin arch: rename _return_from_exception to _bfin_return_from_exception ↵Mike Frysinger
and export it Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-17Blackfin arch: fix spurious newline in headerMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: do not include linux/autoconf.hMike Frysinger
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: remove useless CONFIG_IRQCHIP_DEMUX_GPIOMike Frysinger
since we have this always turned on now and dont want it off (and hasnt been an option in a while) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-15Blackfin arch: fix bug cplbmgr.S does not exit properly on error conditionRobin Getz
https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=1685 Ensure that cache/protection is turned back on when we get a fault, and ensure that the initial population of the CPLB tables are correct - that kernel is locked in CPLB tables Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-11-12Blackfin arch: ensure we work around ANOMALY_05000261 for null pointersRobin Getz
We currently do not. Also make it easier to handle cplb violations - in traps.c Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-29Blackfin arch: ensure that speculative loads of bad pointers don't cause us ↵Robin Getz
to do bad things. Fix/change formatting of a few more things. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: Optimization - no need to make additional math hereMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-22Blackfin arch: force irq_flags into the .data sectionMike Frysinger
force irq_flags into the .data section by initializing it to the hardware masks that cannot be disabled. this way if we use irq enable/disable functions before the .bss has been zeroed out (as does our l1 relocate/dma functions), we dont hit a problem where bss contains bogus crap. Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-21Blackfin arch: add new processor ADSP-BF52x arch/mach supportMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-18PM: Rework struct platform_suspend_opsRafael J. Wysocki
There is no reason why the .prepare() and .finish() methods in 'struct platform_suspend_ops' should take any arguments, since architectures don't use these methods' argument in any practically meaningful way (ie. either the target system sleep state is conveyed to the platform by .set_target(), or there is only one suspend state supported and it is indicated to the PM core by .valid(), or .prepare() and .finish() aren't defined at all).  There also is no reason why .finish() should return any result. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18PM: Rename struct pm_ops and related thingsRafael J. Wysocki
The name of 'struct pm_ops' suggests that it is related to the power management in general, but in fact it is only related to suspend.  Moreover, its name should indicate what this structure is used for, so it seems reasonable to change it to 'struct platform_suspend_ops'.  In that case, the name of the global variable of this type used by the PM core and the names of related functions should be changed accordingly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18PM: Move definition of struct pm_ops to suspend.hRafael J. Wysocki
Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10Blackfin arch: the load address is not safe to point to as a workaround for ↵Robin Getz
ANOMALY 05000281 Now that we have moved head.S into the init section, the load address is not safe to point to as a workaround for ANOMALY 05000281 Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09Blackfin arch: Print out debug info, as early as possibleRobin Getz
Print out debug info, as early as possible - even before the kernel initializes the interrupt vectors. Now we can print out debug messages almost anytime during the boot process. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-20 18:25:58 +0000