summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-common
AgeCommit message (Collapse)Author
2009-06-12Blackfin: check SIC defines rather than variant namesMike Frysinger
Rather than having to maintain a hard coded list of Blackfin variants, use the SIC defines themselves. This fixes build problems on BF51x/BF538 under some configurations as they were missing from one of the lists. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix command line corruption with DEBUG_DOUBLEFAULTMike Frysinger
Commit 6b3087c6 (which introduced Blackfin SMP) broke command line passing when the DEBUG_DOUBLEFAULT config option was enabled. Switch the code to using a scratch register and not R7 which holds the command line. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: drop unused reserve_pda() functionGraf Yang
The Per-processor Data Area isn't actually reserved by this function, and all it ended up doing was issuing a printk(), so punt it. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: make deferred hardware errors more exactRobin Getz
Hardware errors on the Blackfin architecture are queued by nature of the hardware design. Things that could generate a hardware level queue up at the system interface and might not process until much later, at which point the system would send a notification back to the core. As such, it is possible for user space code to do something that would trigger a hardware error, but have it delay long enough for the process context to switch. So when the hardware error does signal, we mistakenly evaluate it as a different process or as kernel context and panic (erp!). This makes it pretty difficult to find the offending context. But wait, there is good news somewhere. By forcing a SSYNC in the interrupt entry, we force all pending queues at the system level to be processed and all hardware errors to be signaled. Then we check the current interrupt state to see if the hardware error is now signaled. If so, we re-queue the current interrupt and return thus allowing the higher priority hardware error interrupt to process properly. Since we haven't done any other context processing yet, the right context will be selected and killed. There is still the possibility that the exact offending instruction will be unknown, but at least we'll have a much better idea of where to look. The downside of course is that this causes system-wide syncs at every interrupt point which results in significant performance degradation. Since this situation should not occur in any properly configured system (as hardware errors are triggered by things like bad pointers), make it a debug configuration option and disable it by default. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add note about anomaly 05000242 being worked aroundMike Frysinger
Document anomaly 05000242 workaround in source code. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: work around anomaly 05000220Graf Yang
When possible, work around anomaly 05000220 (external memory is write back cached, but L2 is not cached). If not possible, detect the conditions at build time and reject any qualifying configurations. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add support for gptimer0 as a tick sourceGraf Yang
For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: annotate anomaly 05000120Graf Yang
Add some notes for anomaly 05000120 to make sure we work around it. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: detect anomaly 05000274Sonic Zhang
Detect and reject operating conditions for anomaly 05000274 since the problem cannot be worked around in software. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: workaround anomaly 05000227Mike Frysinger
Workaround anomaly 05000227 by only using the scratch pad for stack when absolutely necessary. The core code which reprograms clocks really only touches MMRs directly with constants. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: simplify the do_flush macroMike Frysinger
Simplify the do_flush macro now that we don't need to take into account a second instruction being used together. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12Blackfin: merge Philippe's recent ipipe patchPhilippe Gerum
ipipe-2.6.28.9-blackfin-git95aafe6.patch Singed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix data cache flushing when doing icache flushingMike Frysinger
Make sure we flush all data caches and their write buffers before flushing icache, otherwise random edge cases could crop up where stale data is read into icache from external memory. As fallout, punt the combined icache + dcache flush function since we cannot safely do them back to back -- the SSYNC is needed between the dcache flush and the icache flush. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12Blackfin: fix link failure due to CONFIG_EXCEPTION_L1_SCRATCHGraf Yang
Move exception stack mess from entry.S to init.c to fix link failure when CONFIG_EXCEPTION_L1_SCRATCH is in use. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-06-12Blackfin: add comment for anomaly 05000171 to init codeMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-05-27Blackfin: hook up preadv/pwritev syscallsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-03-28Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as wellMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-06Blackfin arch: remove duplicated ANOMALY_05000448 ifdef checkMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: fix bug - On bf548-ezkit, ethernet fails to work after wakeup ↵Michael Hennerich
from "mem" Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: Random read/write errors are a bad thingRobin Getz
Random read/write errors are a bad thing - so don't let anyone (including the test bench) run on something we know is bad. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes ↵Sonic Zhang
instruction on bf561 after soft bp is hit Run IFLUSH twice to avoid loading wrong instruction after invalidating icache and following sequence is met. 1) The one instruction address is cached in the icache. 2) This instruction in SDRAM is changed. 3) IFLASH[P0] is executed only once in lackfin_icache_flush_range(). 4) This instruction is executed again, but not the changed new one. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: make sure people do not set the kernel load address too highMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: fix bug - The SPORT_HYS bit is not set for BF561 0.5Enrik Berkhan
IMHO the setting should depend on ANOMALY_05000305 which is about the availability of the bit, not ANOMALY_05000265 which only describes the SPORT sensitivity to noise (checked for BF561 only, though). If that's not true for other BF variants, maybe the definition of ANOMALY_05000265 for BF561 should be changed to '(1)' instead. Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-05Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on ↵Sonic Zhang
bf561-ezkit kernel with smp patch Free spinlock before call IPI handlers. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Header from folded patch 'blackfin_arch__fix_bug_-_kgdb_fails_to_continue_after_setting_breakpoint_on_bf561-ezkit_kernel_with_smp_patch-1': Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch Don't test l1 code in SMP kernel. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-03-04Blackfin arch: Update adeos blackfin arch patch to 1.9-00Philippe Gerum
Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: fix 2 bugs related to debugJie Zhang
- unable to single step over emuexcpt instruction - gdbproxy goes into infinite loop when doing gdb does "next" over "emuexcpt" Don't decrement PC after software breakpoint. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix bug - 561 SMP kernel can't boot from jffs2Graf Yang
bss_l2 section is garbage when the data in this section is used by _bfin_relocate_l1_mem, so move the zero out function ahead. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: base SIC_IWR# programming on whether the MMR existsMike Frysinger
base SIC_IWR# programming on whether the MMR exists rather than having to maintain another list of processors Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix URLRobin Getz
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-02-04Blackfin arch: Fix Bug - Kernel does not boot if re-program clocksMichael Hennerich
On BF561 EBIU_SDGCTL bit 31 controls the SDRAM external data path width, typically set 0 for a 32-bit bus width. On other Blackfin derivatives this bit should be set by default. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: remove hardware PM code, oprofile not use itGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Faster C implementation of no-MPU CPLB handlerBernd Schmidt
This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code. We ditch the old cplb-nompu implementation, which is a good example of why a good algorithm in a HLL is preferrable to a bad algorithm written in assembly. Rather than try to construct a table of all posible CPLBs and search it, we just create a (smaller) table of memory regions and their attributes. Some of the data structures are now unified for both the mpu and nompu cases. A lot of needless complexity in cplbinit.c is removed. Further optimizations: * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving these registers on the stack when entering a CPLB exception. * lose cli/nop/nop/sti sequences for some workarounds - these don't * make sense in an exception context Additional code unification should be possible after this. [Mike Frysinger <vapier.adi@gmail.com>: - convert CPP if statements to C if statements - remove redundant statements - use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten, we can punt it - add some BUG_ON() checks to make sure we dont overflow the small cplb_bounds array - add i/d cplb entries for the bootrom because there is functions/data in there we want to access - we do not need a NULL trailing entry as any time we access the bounds arrays, we use the nr_bounds variable ] Signed-off-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix incorrect use of loose in cpufreq.cNick Andrew
It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match ↵Mike Frysinger
everyone else Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: get oprofile work for user spaceGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK optionMichael Hennerich
- remove duplicated code and headers - add option allowing arbitrary SDRAM/DDR Timing parameters. - mark automatically calculated timings as EXPERIMENTAL - fix comment header block Related to BUGs: - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on. - kernel does not boot if re-program clocks [ Mike Frysinger <vapier.adi@gmail.com> - fix comment header - mark do_sync static - document the DMA shutdown - simplify SIC_IWR handling - fix ANOMALY_05000265 handling to work as intended ] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Allow a gpio pin be requested both as gpio and irq.Graf Yang
[Mike Frysinger <vapier.adi@gmail.com>: - use KERN_NOTICE when using gpios as both irq and non rather than KERN_ERR - embedded newlines in printk() does not fly] Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Request the gpio resource when making it as an irq pin, ↵Graf Yang
avoiding override it. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Add code to free gpio when shutdown irqGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix bug - reboot fails on BF527Mike Frysinger
add ANOMALY_05000435 to handle SIC_IWR1 workaround for rebooting Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: rename cache_lock() to bfin_cache_lock()Mike Frysinger
rename cache_lock() to bfin_cache_lock() to avoid namespace collision with common code Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix building with CONFIG_DEBUG_DOUBLEFAULTMike Frysinger
arch/blackfin/mach-common/entry.S:465: Error: pcrel too far BFD_RELOC_BFIN_10 Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: rename irq_flags to bfin_irq_flagsMike Frysinger
rename irq_flags to bfin_irq_flags to avoid namespace collision with common code Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: move SIC_SYSIRQ() to the one file that actually uses itMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: rewrite blackfin_invalidate_entire_dcache functionMike Frysinger
rewrite blackfin_invalidate_entire_dcache() in C for easier management, better optimization, and so we take all SSYNC anomalies into account Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: SMP supporting patchset: Blackfin header files and machine ↵Graf Yang
common code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin header files and machine common code Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Cleanup and unify Blackfin IRQ and GPIO IRQ handlingMichael Hennerich
- Remove SSYNC() - Use irq_to_gpio where applicable - Remove gpio_edge_triggered bitfield, check irq_desc fields instead. - Remove gpio_both_edge_triggeredb bitfield, check irq_desc fields instead. - Use BITMAP and bitops on gpio_enabled - Preferably use 32-bit - Looking at the disassembly this indeed saves quite a few instructions. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: remove useless SSYNC() in irq priority codeMike Frysinger
- remove SSYNC() left over from irq init split - do not force SSYNC() when masking/unmasking IRQs in the SIC as any order enforced by the hardware should already be enforced by software Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix bug - gpio_bank() macros messed up bank number caculating ↵Bryan Wu
with positioning a gpio The whole story: Before BF51x merged, all the MAX_BLACKFIN_GPIOS are integral multiple of GPIO_BANKSIZE (= 16). But BF51x provides MAX_BLACKFIN_GPIOS = 40 which includes 3 banks and the 3rd bank has only 8 GPIO pins. Therefore, gpio_bank() macros is correct when you try to find a GPIO in which bank (GPIO_35 is in bank 2). But on BF51x gpio_bank(MAX_BLACKFIN_GPIOS) only gives out 2 banks instead of 3 banks for some static array initialization. This patch add a new macros gpio_bank_n() and GPIO_BANK_NUM to do bank number caculating and remain the gpio_bank() macros for positioning a gpio in which bank. Signed-off-by: Bryan Wu <cooloney@kernel.org>