summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-common
AgeCommit message (Collapse)Author
2009-01-07Blackfin arch: remove hardware PM code, oprofile not use itGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: merge adeos blackfin part to arch/blackfin/Yi Li
[Mike Frysinger <vapier.adi@gmail.com>: - handle bf531/bf532/bf534/bf536 variants in ipipe.h - cleanup IPIPE logic for bfin_set_irq_handler() - cleanup ipipe asm code a bit and add missing ENDPROC() - simplify IPIPE code in trap_c - unify some of the IPIPE code and fix style - simplify DO_IRQ_L1 handling with ipipe code - revert IRQ_SW_INT# addition from ipipe merge - remove duplicate get_{c,s}clk() prototypes ] Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Faster C implementation of no-MPU CPLB handlerBernd Schmidt
This is a mixture ofcMichael McTernan's patch and the existing cplb-mpu code. We ditch the old cplb-nompu implementation, which is a good example of why a good algorithm in a HLL is preferrable to a bad algorithm written in assembly. Rather than try to construct a table of all posible CPLBs and search it, we just create a (smaller) table of memory regions and their attributes. Some of the data structures are now unified for both the mpu and nompu cases. A lot of needless complexity in cplbinit.c is removed. Further optimizations: * compile cplbmgr.c with a lot of -ffixed-reg options, and omit saving these registers on the stack when entering a CPLB exception. * lose cli/nop/nop/sti sequences for some workarounds - these don't * make sense in an exception context Additional code unification should be possible after this. [Mike Frysinger <vapier.adi@gmail.com>: - convert CPP if statements to C if statements - remove redundant statements - use a do...while loop rather than a for loop to get slightly better optimization and to avoid gcc "may be used uninitialized" warnings ... we know that the [id]cplb_nr_bounds variables will never be 0, so this is OK - the no-mpu code was the last user of MAX_MEM_SIZE and with that rewritten, we can punt it - add some BUG_ON() checks to make sure we dont overflow the small cplb_bounds array - add i/d cplb entries for the bootrom because there is functions/data in there we want to access - we do not need a NULL trailing entry as any time we access the bounds arrays, we use the nr_bounds variable ] Signed-off-by: Michael McTernan <mmcternan@airvana.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Fix incorrect use of loose in cpufreq.cNick Andrew
It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: rename MAX_BLACKFIN_DMA_CHANNEL to MAX_DMA_CHANNELS to match ↵Mike Frysinger
everyone else Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: get oprofile work for user spaceGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: fix bugs and unify BFIN_KERNEL_CLOCK optionMichael Hennerich
- remove duplicated code and headers - add option allowing arbitrary SDRAM/DDR Timing parameters. - mark automatically calculated timings as EXPERIMENTAL - fix comment header block Related to BUGs: - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on. - kernel does not boot if re-program clocks [ Mike Frysinger <vapier.adi@gmail.com> - fix comment header - mark do_sync static - document the DMA shutdown - simplify SIC_IWR handling - fix ANOMALY_05000265 handling to work as intended ] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: Allow a gpio pin be requested both as gpio and irq.Graf Yang
[Mike Frysinger <vapier.adi@gmail.com>: - use KERN_NOTICE when using gpios as both irq and non rather than KERN_ERR - embedded newlines in printk() does not fly] Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Request the gpio resource when making it as an irq pin, ↵Graf Yang
avoiding override it. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Add code to free gpio when shutdown irqGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix bug - reboot fails on BF527Mike Frysinger
add ANOMALY_05000435 to handle SIC_IWR1 workaround for rebooting Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: rename cache_lock() to bfin_cache_lock()Mike Frysinger
rename cache_lock() to bfin_cache_lock() to avoid namespace collision with common code Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix building with CONFIG_DEBUG_DOUBLEFAULTMike Frysinger
arch/blackfin/mach-common/entry.S:465: Error: pcrel too far BFD_RELOC_BFIN_10 Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: rename irq_flags to bfin_irq_flagsMike Frysinger
rename irq_flags to bfin_irq_flags to avoid namespace collision with common code Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: move SIC_SYSIRQ() to the one file that actually uses itMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: rewrite blackfin_invalidate_entire_dcache functionMike Frysinger
rewrite blackfin_invalidate_entire_dcache() in C for easier management, better optimization, and so we take all SSYNC anomalies into account Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2009-01-07Blackfin arch: SMP supporting patchset: Blackfin header files and machine ↵Graf Yang
common code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin header files and machine common code Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: Cleanup and unify Blackfin IRQ and GPIO IRQ handlingMichael Hennerich
- Remove SSYNC() - Use irq_to_gpio where applicable - Remove gpio_edge_triggered bitfield, check irq_desc fields instead. - Remove gpio_both_edge_triggeredb bitfield, check irq_desc fields instead. - Use BITMAP and bitops on gpio_enabled - Preferably use 32-bit - Looking at the disassembly this indeed saves quite a few instructions. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: remove useless SSYNC() in irq priority codeMike Frysinger
- remove SSYNC() left over from irq init split - do not force SSYNC() when masking/unmasking IRQs in the SIC as any order enforced by the hardware should already be enforced by software Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix bug - gpio_bank() macros messed up bank number caculating ↵Bryan Wu
with positioning a gpio The whole story: Before BF51x merged, all the MAX_BLACKFIN_GPIOS are integral multiple of GPIO_BANKSIZE (= 16). But BF51x provides MAX_BLACKFIN_GPIOS = 40 which includes 3 banks and the 3rd bank has only 8 GPIO pins. Therefore, gpio_bank() macros is correct when you try to find a GPIO in which bank (GPIO_35 is in bank 2). But on BF51x gpio_bank(MAX_BLACKFIN_GPIOS) only gives out 2 banks instead of 3 banks for some static array initialization. This patch add a new macros gpio_bank_n() and GPIO_BANK_NUM to do bank number caculating and remain the gpio_bank() macros for positioning a gpio in which bank. Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: do not bother initializing the first 4kMike Frysinger
our kernel should be sane now, and we want to catch NULL bugs, not ignore them Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: use sti to set the mask rather than banging on imaskMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: only add IFLUSH nop padding when anomaly 443 is enabledMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: add support for Blackfin latest processor family BF51xBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: fix bug - kernel with SMP patch can not bootupGraf Yang
The original code defined _exception_stack but not alloc space for the exception stack. In exception, this area is over written by exception stack. Common kernel luckly boot up, but SMP kernel stuck. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: add an option to allow people to stick exception stack into ↵Mike Frysinger
L1 scratch allow people to stick exception stack into L1 scratch and make sure it gets placed into .bss sections rather than .data Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: move EXPORT_SYMBOL to the place where it is actually definedMike Frysinger
- kernel_thread - irq_flags - checksum Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: BF538/9 Linux kernel SupportMichael Hennerich
Add supporing for Blackfin BF538 and BF539 processors. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-27Blackfin arch: unify duplicated bss init codeMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crashGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz.Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-28Blackfin arch: fix bug - kernel build with write back policy fails to be ↵Mike Frysinger
booted up Make sure IFLUSH is not the last instruction in the hardware loop to avoid infinite core stall. The dcache/icache function that only gets used in writeback mode was putting IFLUSH as the last instruction in the hardware loop ... we know from design that this may often lead to inifite core stalling, so switch the FLUSH/IFLUSH order. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18Blackfin arch: fix bug - dmacopy test case fail on all platformMike Frysinger
The cache code I added flushes 1 line too little if the start address is not aligned to the cache size. Cache align the start address so that when we straddle cache aligns, we get the right count. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: make sure cycles is marked as volatile so gcc doesnt reorder on us Blackfin arch: disable CONFIG_HW_RANDOM and CONFIG_DAB in defconfig files Blackfin arch: update cache flush prototypes with argument names to make them less mysterious Blackfin arch: move bfin_addr_dcachable() and friends into the cacheflush header where it belongs Blackfin arch: use the new bfin_addr_dcachable() function Blackfin arch: fix bug - build kernel failed at head.S when reprogram clock on all platforms Blackfin arch: unify/cleanup cache code Blackfin arch: update AD7879 platform resources in board file Blackfin arch: Zero out bss region in L1/L2 memory. Blackfin arch: add read/write IO accessor functions to Blackfin Blackfin arch: fix bug - some serial header files set RTS to an input when they should all be outputs
2008-10-16Blackfin arch: unify/cleanup cache codeMike Frysinger
- to be correct wrt to end ranges - to be optimal with a one-instruction hardware loop Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-16Blackfin arch: Zero out bss region in L1/L2 memory.Graf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-15cpufreq: remove policy->governor setting in drivers initializationDominik Brodowski
As policy->governor is already set to CPUFREQ_DEFAULT_GOVERNOR in the (always built-in) cpufreq core, we do not need to set it in the drivers. This fixes the sparc64 allmodconfig build failure. Also, remove a totally useles setting of ->policy in cpufreq-pxa3xx.c. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-09Blackfin arch: Fix bug - HW Errors never recover on BF548Robin Getz
The kernel does not properly clear the EBIU Error Master (EBIU_ERRMST) Register on BF548, which causes the kernel to panic. We need to make sure that we clear the EBIU_ERRMST (necessary on BF54x) Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: give sys_strace proper entry markingsMike Frysinger
a global _sys_trace will cause the assembler to fail, it should be fixed in toolchain side firstly. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09Blackfin arch: Fix BUG -- BF533 + 0.5 silicon + MPU + UART PIO -> crashMichael Hennerich
Apply ANOMALY_05000283 & ANOMALY_05000315 Workaround also to the EXCEPTION path. Cover evt_ivhw also with ANOMALY_05000315 The Workaround needs to be prior to accesses (either read or write) to any system MMR. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Not call generic set_irq_handler() in bfin_gpio_irq_type() ↵Graf Yang
due to spinlock recursion Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Use DTEST rather than DMA to poke at L1 SRAM during exception ↵Robin Getz
context Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: Modify some funtion names to more genernal onesGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: add a meaningful name for each irqchipGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-13Blackfin arch: add supporting for kgdbSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-08Blackfin arch: add supporting for double fault debug handlingRobin Getz
Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-28Blackfin arch: Fix PM building on BF52x: No ROTWE on BF52x, add USBWEMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-27Blackfin arch: move include/asm-blackfin header files to arch/blackfinBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-25Blackfin arch: dont actually need to muck with EMAC_SYSTAT for BF52x for ↵Mike Frysinger
demuxing Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-14Blackfin arch: hook up some missing new system callsBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 09:40:16 +0000