summaryrefslogtreecommitdiffstats
path: root/arch/ia64/configs
AgeCommit message (Collapse)Author
2007-03-08[IA64] refresh config filesTony Luck
Bring defconfig, tiger_defconfig and zx1_defconfig up to date. Also sprinkle KEXEC and KDUMP combinations around liberally so that my usual regression test builds will see all combinations: tiger_defconfig gets KEXEC=y, CRASH_DUMP=n zx1_defconfig gets KEXEC=n, CRASH_DUMP=y defconfig gets KEXEC=y, CRASH_DUMP=y others remain at KEXEC=n, CRASH_DUMP=n Signed-off-by: Tony Luck <tomy.luck@intel.com>
2006-10-17[IA64] update sn2_defconfigJes Sorensen
The current sn2_defconfig is obsolete, in particular the recent ATA changes are a pain, so here's a patch to get things in sync ... at least for a day or two :) Update sn_defconfig to match current community kernel tree. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-07-31[PATCH] sgiioc4: Always share IRQBrent Casavant
The SGI IOC4 IDE device always shares an interrupt with other devices which are part of IOC4. As such, IDEPCI_SHARE_IRQ should always be enabled when BLK_DEV_SGIIOC4 is enabled. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[IA64] tiger_defconfig s/NR_CPUS=4/NR_CPUS=16/Tony Luck
Montecito is coming with dual core and threading, so this four socket box can now have sixteen logical cpus. Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-05-17[IA64] sn2 defconfigJes Sorensen
Set node shift to 10 on SN2 and disable mutex debugging. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-04-27[IA64] update sn2 defconfigJes Sorensen
Update SN2 defconfig to latest kernel and add QLA FC drivers commonly found in SN2 boxes. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-24[IA64] Increase max node count on SN platformsJack Steiner
Update configuration files with new CONFIG option. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-21Pull bsp-removal into release branchTony Luck
2006-03-07[IA64] gensparse_defconfig: turn on PNPACPIBjorn Helgaas
Turn on CONFIG_PNPACPI. I recently removed 8250_acpi.c. All devices previously claimed by 8250_acpi.c should now be claimed by 8250_pnp.c. This depends on having CONFIG_PNPACPI so ACPI devices show up as PNP devices. All other ia64 defconfigs either have CONFIG_PNPACPI already, or don't have 8250 support turned on at all. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-02-27[IA64] refresh default config filesTony Luck
Bring all ia64 config files up to date Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-18[PATCH] e1000: Added disable packet split capabilityJesse Brandeburg
Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-14[PATCH] Altix: ioc3 serial supportPatrick Gefre
Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes: This is a re-submission. On the original submission I was asked to organize the code so that the MIPS ioc3 ethernet and serial parts could be used with this driver. Stanislaw Skowronek was kind enough to provide the shim layer for this - thanks Stanislaw. This patch includes the shim layer and the Altix PCI ioc3 serial driver. The MIPS merged ioc3 ethernet and serial support is forthcoming. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-05[IA64] support for cpu0 removalAshok Raj
here is the BSP removal support for IA64. Its pretty much the same thing that was released a while back, but has your feedback incorporated. - Removed CONFIG_BSP_REMOVE_WORKAROUND and associated cmdline param - Fixed compile issue with sn2/zx1 due to a undefined fix_b0_for_bsp - some formatting nits (whitespace etc) This has been tested on tiger and long back by alex on hp systems as well. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-16[IA64-SGI] change default_sn2 to NR_CPUS==1024hawkes@sgi.com
Change the NR_CPUS default for ia64/sn up to 1024. Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: John Hesterberg <jh@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-02[IA64] refresh tiger_defconfig ready for 2.6.15Tony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-12-02[IA64] Updates to the sn2_defconfig for 2.6.15.Robin Holt
This updates the sn2_defconfig file for the Altix 330 hardware, enables the AGP graphics for the SGI Prism, and removes prompts for the remainder of the new features. Greg Edwards reviewed the changes. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-11[IA64] 4-level page tablesRobin Holt
This patch introduces 4-level page tables to ia64. I have run some benchmarks and found nothing interesting. Performance has consistently fallen within the noise range. It also introduces a config option (setting the default to 3 levels). The config option prevents having 4 level page tables with 64k base page size. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-28Pull sparsemem-v5 into release branchTony Luck
2005-10-04[PATCH] V5 ia64 SPARSEMEM - gensparse_defconfigBob Picco
gensparse_defconfig is a config generated file for SPARSEMEM and GENERIC kernel configuration (defconfig). Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-15[IA64] Update default configsBjorn Helgaas
PNP and PNPACPI turned on i8042 recently changed from ACPI to PNP detection. Without PNP, it probes legacy I/O ports for the keyboard controller, which causes an MCA on HP boxes. Also, I'm about to remove 8250_acpi.c, so we'll need PNP to detect non-PCI serial ports. Until 8250_acpi.c is removed, some systems will see serial ports reported twice (once from 8250_acpi.c and again from 8250_pnp.c). This is harmless. PNPACPI is still marked EXPERIMENTAL, but I'm not aware of any outstanding issues on ia64. IDE_GENERIC turned off (except for SGI simulator, all ia64 IDE is PCI) ide-generic probes compiled-in legacy I/O ports for IDE devices, which again causes an MCA. It would be nicer to just get rid of all the legacy junk from include/asm-ia64/ide.h, but that is a bit riskier because it could break ide-cs and the HDIO_REGISTER_HWIF ioctl (http://www.ussg.iu.edu/hypermail/linux/kernel/0508.2/0049.html). Here's the essence of the patch: -# CONFIG_PNP is not set +CONFIG_PNP=y +CONFIG_PNPACPI=y -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set Tested on tiger, bigsur, and zx1. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-08[IA64] Manual merge fix for 3 filesTony Luck
arch/ia64/Kconfig arch/ia64/kernel/acpi.c include/asm-ia64/irq.h Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-07[IA64] Minor cleanups - remove CONFIG_ACPI_DEALLOCATE_IRQKenji Kaneshige
The config option 'CONFIG_ACPI_DEALLOCATE_IRQ' is no longer needed. This patch removes it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-25[ACPI] delete CONFIG_ACPI_PCILen Brown
Delete the ability to build an ACPI kernel that does not include PCI support. When such a machine is created and it requires a tuned kernel, send a patch. http://bugzilla.kernel.org/show_bug.cgi?id=1364 Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-25[ACPI] IA64-related ACPI Kconfig fixesLen Brown
Build issues were mostly in the ACPI=n case -- don't do that. Select ACPI from IA64_GENERIC. Add some missing dependencies on ACPI. Mark BLACKLIST_YEAR and some laptop-only ACPI drivers as X86-only. Let me know when you get an IA64 Laptop. Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[ACPI] delete CONFIG_ACPI_BUSLen Brown
it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[ACPI] delete CONFIG_ACPI_INTERPRETERLen Brown
it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24[ACPI] delete CONFIG_ACPI_BOOTLen Brown
it has been a synonym for CONFIG_ACPI since 2.6.12 Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-17[IA64] Updated tiger defconfigTony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16[IA64] Updated zx1 defconfigPeter Chubb
Just `make oldconfig' doesn't help for the zx1 defconfig --- because we need the MPT Fusion drivers, which are picked up as not selected. Tested on HP ZX2000 and ZX2600. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-16[IA64] Refresh arch/ia64/configs/sn2_defconfig.Greg Edwards
Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-12[IA64] remove CONFIG_IA64_SGI_SN_SIMGreg Edwards
This patch removes the CONFIG_IA64_SGI_SN_SIM option entirely, allowing any kernel bootable on sn2 to also be booted in the simulator. Boot tested on Altix and HP rx2600. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29[IA64] Update zx1_defconfigTony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-29[IA64] Update tiger_defconfigTony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-28[IA64-SGI] altix: enable vgacon supportMark Maule
Altix patch to enable use of vgacon driver on that platform. Depends on the PCDP generalization patch discussed at: http://marc.theaimsgroup.com/?l=linux-ia64&m=111446235101939&w=2 Signed-off-by: Mark Maule <maule@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-23[PATCH] update all defconfigs for ARCH_DISCONTIGMEM_ENABLEDave Hansen
This will at least suppress one prompt that users would have received the first time they compile with the new DISCONTIG arch option. They'll still get the "Memory Model" prompt, but 99% of them will have the default work there. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22Merge kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.gitLinus Torvalds
Do arch/ia64/defconfig by hand.
2005-06-21[PATCH] ioc4: CONFIG splitBrent Casavant
The SGI IOC4 I/O controller chip drivers are currently all configured by CONFIG_BLK_DEV_SGIIOC4. This is undesirable as not all IOC4 hardware features are needed by all systems. This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4 driver support (see patch 1/3 in this series for further explanation) and CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Acked-by: Pat Gefre <pfg@sgi.com> Acked-by: Jeremy Higdon <jeremy@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[IA64] Refresh tiger_defconfigTony Luck
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03[IA64] Update arch/ia64/configs/tiger_defconfigTony Luck
Kristen did most of the checking, bring this up to -rc2. Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64-SGI] Bus driver for the CX port of SGI's TIO chip.Bruce Losure
This patch is to provide CX port infrastructure for SGI TIO-based h/w. Also a 'core services' driver for SGI FPGA-based h/w. Signed-off-by: Bruce Losure <blosure@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 22:47:28 +0000