| Age | Commit message (Collapse) | Author |
|---|
|
The code is identical except locking. But added locks to protect
counts do not hurt here. Rather the contrary.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All ->start, ->stop and ->wait_until_sent are empty and need not be
defined. The time to remove them is now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
And use it to make the code more readable.
Since tport doesn't conflict with port anymore and there are not many
tport accessors left, do also s/\<tport\>/port/g.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Let's do a spin-off of serial_state structure with only needed
elements.
And remove serialP crap from includes.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
* instead of line, use tty->index or an iterator
* icount is not made public, only the tx path increments it
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is totally unused.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We do not use any of the preinitialized rs_state members for something
real. So there is no need to initialize them. At the places we used
them for printing, just print the values.
And since only one port is supported, get rid of the loop. This
simplifies simrs_init a heap. Thus we can handle fail paths in a
standard way without panicing.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This changes flags' type to ulong which is appropriate for all the
set/clear_bits performed in the drivers..
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Nothing special. Just remove count from serial_state and change all
users to use tty_port.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Note that previously simserial set the delay to 0. So we preserve
that. BUT, is it correct?
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add tty_port to serial_state and start using common tty port members
from tty_port in amiserial and simserial. The rest will follow one by
one.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This avoids pain with tty refcounting and touching tty_port in the
future. It allows us to remove some state->tty tests because the tty
passed down to them can never be NULL.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is the final step to get rid of the one of the structures. A
further cleanup will follow. And I struct serial_state deserves cease
to exist after a switch to tty_port too.
While changing the lines, it removes also pointless tty->driver_data
casts.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We do not set ASYNC_SHARE_IRQ anywhere. And since IRQF_DISABLED is a
noop, pass zero to request_irq directly instead of this ugly macro.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It never worked there. The ISR was never written for that kind of
stuff. So remove all that crap with a hash of linked lists and pass
the pointer directly to the ISR.
BTW this answers the question there:
* I don't know exactly why they don't use the dev_id opaque data
* pointer instead of this extra lookup table
-> Because they thought they will support more devices bound to a
single interrupt w/o IRQF_SHARED. They would need exactly the hash
there.
What I don't understand is rebinding of the interrupt in the shutdown
path. They perhaps meant to do just synchronize_irq? In any case, this
is all gone and free_irq there properly.
By removing the hash we save some bits (exactly NR_IRQS * 8 bytes of
.bss and over a kilo of .text):
before:
text data bss dec hex filename
19600 320 8227 28147 6df3 ../a/ia64/arch/ia64/hp/sim/simserial.o
after:
text data bss dec hex filename
18568 320 28 18916 49e4 ../a/ia64/arch/ia64/hp/sim/simserial.o
Note that a shared interrupt could not work too. request_irq requires
data parameter to be non-NULL. So the whole IRQ_T exercise was
pointless.
Finally, this helps us remove another two members of async_struct :).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This means:
* close_delay
* closing_wait
* line
* port
* xmit_fifo_size
This actually fixes a bug in amiserial. It initializes one and uses
the other of the close delays. Yes, duplicating structure members is
evil.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same as for amiserial. Use only one instance of the flags.
Also remove them from async_struct now. Nobody else uses them.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Without this, the code succeeds when the port is opened by root and we
get unwanted interrupts storm on the first key stroke.
Instead of that, tell the user we failed and that we won't continue. I
suppose, the code was copied from the serial layer where we may want
to change the irq number, so we must allow open even of the failing
port. This is not the case for this driver at all.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, when assign_irq_vector is called and the irq connected in
the simulator, the irq is not ready. request_irq will return ENOSYS
immediately. It is because the irq chip is unset.
Hence set the chip properly to irq_type_hp_sim. And make sure this is
done from both users of simulated interrupts.
Also we have to set handler here, otherwise we end up in
handle_bad_int resulting in spam in logs and no irqs handled. We use
handle_simple_irq as these are SW interrupts that need no ACK or
anything.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
And remove declarations which are already in the headers.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The switch-cases of SAL_FREQ_BASE generate non-relocatable code. The
same as for the ifs one level upper. This causes oopses early in boot
because the kernel jumps to the hell instead of the offset in sal
callback.
So use ifs here for SAL_FREQ_BASE decision too.
Isn't there any compiler directive or settings to solve that cleanly?
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tty_wakeup is safe to be called from all contexts. No need to schedule
a tasklet for that. Let's call it directly like in other drivers.
This allows us to kill another member of async_struct structure. (If
we remove the dummy uses in simserial.)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
First, remove unused macro and rs_multiport_struct structure. Nobody
uses them at all.
Further, the 2 drivers (they are below) which use the rest of
structures from serialP.h (async_struct and serial_state) do not use
all the members. Remove the members:
* which are unused or
* which are only initialized and never used for something real.
Everybody should avoid the structures with a looong distance.
Finally, remove the ALPHA kludge MCR quirks. They are 1:1 copy from
8250.h. No need to redefine them here.
The 2 promised users of the structures:
arch/ia64/hp/sim/simserial.c
drivers/tty/amiserial.c
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Checking if tty->index is in bounds is not needed. The tty has the
index set in the initial open. This is done in get_tty_driver. And it
can be only in interval <0,driver->num).
So remove the tests which check exactly this interval. Some are
left untouched as they check against the current backing device count.
(Leaving apart that the check is racy in most of the cases.)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All num, magic and owner are set by alloc_tty_driver. No need to
re-set them on each allocation site.
pti driver sets something different to what it passes to
alloc_tty_driver. It is not a bug, since we don't use the lines
parameter in any way. Anyway this is fixed, and now we do the right
thing.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If some vcpus are created before KVM_CREATE_IRQCHIP, then
irqchip_in_kernel() and vcpu->arch.apic will be inconsistent, leading
to potential NULL pointer dereferences.
Fix by:
- ensuring that no vcpus are installed when KVM_CREATE_IRQCHIP is called
- ensuring that a vcpu has an apic if it is installed after KVM_CREATE_IRQCHIP
This is somewhat long winded because vcpu->arch.apic is created without
kvm->lock held.
Based on earlier patch by Michael Ellerman.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Some members of kvm_memory_slot are not used by every architecture.
This patch is the first step to make this difference clear by
introducing kvm_memory_slot::arch; lpage_info is moved into it.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
On some cpus the overhead for virtualization instructions is in the same
range as a system call. Having to call multiple ioctls to get set registers
will make certain userspace handled exits more expensive than necessary.
Lets provide a section in kvm_run that works as a shared save area
for guest registers.
We also provide two 64bit flags fields (architecture specific), that will
specify
1. which parts of these fields are valid.
2. which registers were modified by userspace
Each bit for these flag fields will define a group of registers (like
general purpose) or a single register.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch exports the s390 SIE hardware control block to userspace
via the mapping of the vcpu file descriptor. In order to do so,
a new arch callback named kvm_arch_vcpu_fault is introduced for all
architectures. It allows to map architecture specific pages.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This patch introduces a new config option for user controlled kernel
virtual machines. It introduces a parameter to KVM_CREATE_VM that
allows to set bits that alter the capabilities of the newly created
virtual machine.
The parameter is passed to kvm_arch_init_vm for all architectures.
The only valid modifier bit for now is KVM_VM_S390_UCONTROL.
This requires CAP_SYS_ADMIN privileges and creates a user controlled
virtual machine on s390 architectures.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Coccinelle based conversion.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
To get rid of things like:
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: data definition has no type or storage class
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/ia64/sn/kernel/sn2/sn_hwperf.c:1002:1: warning: parameter names (without types) in function declaration
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The device_register() is declared with must_check, causing this:
arch/ia64/sn/kernel/tiocx.c: In function 'cx_device_register':
arch/ia64/sn/kernel/tiocx.c:210:17: warning: ignoring return value of 'device_register', declared with attribute warn_unused_result
Check the return value, and free resources if it fails.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Use proper cpp defined(...) constructs to avoid this:
arch/ia64/kernel/machine_kexec.c: In function 'arch_crash_save_vmcoreinfo':
arch/ia64/kernel/machine_kexec.c:160:8: warning: "CONFIG_PGTABLE_4" is not defined
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Without this, the code succeeds when the port is opened by root and we
get unwanted interrupts storm on the first key stroke.
Instead of that, tell the user we failed and that we won't continue. I
suppose, the code was copied from the serial layer where we may want
to change the irq number, so we must allow open even of the failing
port. This is not the case for this driver at all.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Currently, when assign_irq_vector is called and the irq connected in
the simulator, the irq is not ready. request_irq will return ENOSYS
immediately. It is because the irq chip is unset.
Hence set the chip properly to irq_type_hp_sim. And make sure this is
done from both users of simulated interrupts.
Also we have to set handler here, otherwise we end up in
handle_bad_int resulting in spam in logs and no irqs handled. We use
handle_simple_irq as these are SW interrupts that need no ACK or
anything.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
And remove declarations which are already in the headers.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
The switch-cases of SAL_FREQ_BASE generate non-relocatable code. The
same as for the ifs one level upper. This causes oopses early in boot
because the kernel jumps to the hell instead of the offset in sal
callback.
So use ifs here for SAL_FREQ_BASE decision too.
Isn't there any compiler directive or settings to solve that cleanly?
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Print MAC/dev_addr via printk extended format specifier %pm
instead of custom code.
Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
|
|
This is useful for testing RX handling of frames with bad
CRCs.
Requires driver support to actually put the packet on the
wire properly.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
static_key_slow_[inc|dec]()
So here's a boot tested patch on top of Jason's series that does
all the cleanups I talked about and turns jump labels into a
more intuitive to use facility. It should also address the
various misconceptions and confusions that surround jump labels.
Typical usage scenarios:
#include <linux/static_key.h>
struct static_key key = STATIC_KEY_INIT_TRUE;
if (static_key_false(&key))
do unlikely code
else
do likely code
Or:
if (static_key_true(&key))
do likely code
else
do unlikely code
The static key is modified via:
static_key_slow_inc(&key);
...
static_key_slow_dec(&key);
The 'slow' prefix makes it abundantly clear that this is an
expensive operation.
I've updated all in-kernel code to use this everywhere. Note
that I (intentionally) have not pushed through the rename
blindly through to the lowest levels: the actual jump-label
patching arch facility should be named like that, so we want to
decouple jump labels from the static-key facility a bit.
On non-jump-label enabled architectures static keys default to
likely()/unlikely() branches.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: a.p.zijlstra@chello.nl
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Everybody uses the generic pcibios_resource_to_bus() supplied by the core
now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Tell the PCI core about host bridge address translation so it can take
care of bus-to-resource conversion for us.
CC: Tony Luck <tony.luck@intel.com>
CC: Jack Steiner <steiner@sgi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Convert from pci_scan_bus() to pci_scan_root_bus(). Supply the root
bus resources from bussoft. When we move the resource adjustment from
pcibios_fixup_resources() to the PCI core, it will be important to have
the root bus resources correct from the beginning.
CC: Tony Luck <tony.luck@intel.com>
CC: Jack Steiner <steiner@sgi.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This patch allows the system to boot and enables the console and at least
some hardware drivers, as well as some platform error handling.
Tested on a variety of SGI Altix system without issues.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Tested-by: Raymund Will <rw@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
This one specifies where to start MSG_PEEK-ing queue data from. When
set to negative value means that MSG_PEEK works as ususally -- peeks
from the head of the queue always.
When some bytes are peeked from queue and the peeking offset is non
negative it is moved forward so that the next peek will return next
portion of data.
When non-peeking recvmsg occurs and the peeking offset is non negative
is is moved backward so that the next peek will still peek the proper
data (i.e. the one that would have been picked if there were no non
peeking recv in between).
The offset is set using per-proto opteration to let the protocol handle
the locking issues and to check whether the peeking offset feature is
supported by the protocol the socket belongs to.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Correct spelling "vecotr" to "vector" in
arch/ia64/xen/irq_xen.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Change the ia64 architecture to use <asm-generic/posix_types.h>.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1328677745-20121-10-git-send-email-hpa@zytor.com
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
|
|
SAL specification mandates that ia64_mca_log_sal_error_record() gets
called with interrupts enabled, and that's why ia64_mca_cmc_int_handler()
is enabling them. It however forgets to re-disable them when exiting,
which triggers WARN_ON() in generic IRQ handler.
Disable the interrupts again before exiting. This is analogous to
a3967685745 ("[IA64] disable interrupts at end of ia64_mca_cpe_int_handler()").
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
This includes initial support for the recently published ACPI 5.0 spec.
In particular, support for the "hardware-reduced" bit that eliminates
the dependency on legacy hardware.
APEI has patches resulting from testing on real hardware.
Plus other random fixes.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits)
acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
intel_idle: Split up and provide per CPU initialization func
ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
ACPI processor: Remove unneeded cpuidle_unregister_driver call
intel idle: Make idle driver more robust
intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle
ACPI: kernel-parameters.txt : Add intel_idle.max_cstate
intel_idle: remove redundant local_irq_disable() call
ACPI processor: Fix error path, also remove sysdev link
ACPI: processor: fix acpi_get_cpuid for UP processor
intel_idle: fix API misuse
ACPI APEI: Convert atomicio routines
ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
ACPI: Fix possible alignment issues with GAS 'address' references
ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64)
ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64)
ACPI: Store SRAT table revision
ACPI, APEI, Resolve false conflict between ACPI NVS and APEI
ACPI, Record ACPI NVS regions
ACPI, APEI, EINJ, Refine the fix of resource conflict
...
|
