summaryrefslogtreecommitdiffstats
path: root/arch/m32r
AgeCommit message (Collapse)Author
2007-09-06m32r: Rename STI/CLI macrosHirokazu Takata
The names of STI and CLI macros were derived from i386 arch historically, but their name are incomprehensible. So, for easy to understand, rename these macros to ENABLE_INTERRUPTS and DISABLE_INTERRUPTS, respectively. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-06m32r: build fix of entry.SHirokazu Takata
This patch fixes the following compile error: <-- snip --> ... AS arch/m32r/kernel/entry.o /home/bunk/linux/kernel-2.6/linux-2.6.23-rc3-mm1/arch/m32r/kernel/entry.S: Assembler messages: /home/bunk/linux/kernel-2.6/linux-2.6.23-rc3-mm1/arch/m32r/kernel/entry.S:358: Error: bad instruction `addi r0,#(((((0)+(64))+(32))+(32)))' make[2]: *** [arch/m32r/kernel/entry.o] Error 1 <-- snip --> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: Adrian Bunk <bunk@kernel.org>
2007-09-03m32r: Separate syscall table from entry.SHirokazu Takata
- Separate sys_call_table from arch/m32r/kernel/entry.S and move it to arch/m32r/kernel/system_call.S. - Change sys_call_table section from .data to .rodata. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Cosmetic updates of arch/m32r/kernel/entry.SHirokazu Takata
- Remove unused symbols *_MASK - Change indentation of comments, etc. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Exit ei_handler directly for no IRQ case or IPI operationsHirokazu Takata
If no IRQ request is found in the IRQ check of ei_handler, we can exit directly by jumping "restore_all", instead of via "ret_from_intr". This modification is also likely effective for IPI operations, because scheduler call never happen at the exit of IPIs. Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Simplify ei_handler codeHirokazu Takata
Simplify and clean up messy ei_handler code in arch/m32r/kernel/entry.S. - Remove ifdef's for CONFIG_CHIP_* configulations. - Rearrange the M32700 workaround code. - Remove the messy platform-dependent interrupt check routines and consolidate them to common INT0/INT1/INT2 check routines for all platforms with cascaded interrupt controllers. Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Define symbols to unify platform-dependent ICU checksHirokazu Takata
On some m32r platforms, cascaded ICUs are used. This patch is required to simplify ei_handler and consolidate platform- dependent ICU check routines. platform ICU/INT1 ICU/INT0 ICU/INT2 -------------- -------- -------- -------- m32104ut o - - m32700ut o o o opsput o o o usrv o - - (others) - - - Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Move dot.gdbinit filesHirokazu Takata
Move dot.gdbinit files from arch/m32r/{platforms}/dot.gdbinit* to arch/m32r/platforms/{platform}/. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Rearrange platform-dependent codesHirokazu Takata
Rearrange platform-dependent codes from arch/m32r/kernel/*.c to arch/m32r/platforms/{platform}/. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Add defconfig file for the usrv platform.Hirokazu Takata
Add usrv_defcofig file for the usrv (M32R MicroServer) platform. platform defconfig Note ---------- ---------------------- --------------------------- usrv usrv_defconfig SMP Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Update defconfig files for 2.6.23-rc1Hirokazu Takata
Update defconfig files for 2.6.23-rc1 in arch/m32r/configs/. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-09-03m32r: Move defconfig files to arch/m32r/configs/Hirokazu Takata
Change defconfig file's location from arch/m32r/{platform}/defconfig* to arch/m32r/configs/{platform}_defconfig. Applying this patch, we can use defconfig file for each m32r platform easily, like other architectures. ex. Setup defconfig for cross-building $ make ARCH=m32r CROSS_COMPILE=m32r-linux-gnu- {platform}_defconfig. platform defconfig Note ---------- ---------------------- --------------------------- m32104ut m32104ut_defconfig MMU-less m32700ut m32700ut.smp_defconfig SMP m32700ut m32700ut.up_defconfig UP mappi mappi.smp_defconfig SMP mappi mappi.up_defconfig UP mappi mappi.nommu_defconfig MMU-less mappi2 mappi2.opsp_defconfig FPGA env. (CPU Core: OPSP) mappi2 mappi2.vdec2_defconfig FPGA env. (CPU Core: VDEC2) mappi3 imappi3.smp_defconfig SMP oaks32r oaks32r_defconfig MMU-less opsput opsput_defconfig UP Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
2007-07-30m32r: build fix for removing fs.h from mm.hHirokazu Takata
This patch fixes the m32r build after the commit "Remove fs.h from mm.h" was merged (commit 4e950f6f0189f65f8bf069cf2272649ef418f5e4). Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26m32r: Fix ei_tx_timeout() in drivers/net/lib8390.cHirokazu Takata
Change INT0 trigger mode from edge-sense mode to level-sense mode, in order to fix the following timeout error: 'NETDEV WATCHDOG: eth0: transmit timed out'. This patch is required only for the Mappi platform. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits) i2c: Delete the i2c-isa pseudo bus driver hwmon: refuse to load abituguru driver on non-Abit boards hwmon: fix Abit Uguru3 driver detection on some motherboards hwmon/w83627ehf: Be quiet when no chip is found hwmon/w83627ehf: No need to initialize fan_min hwmon/w83627ehf: Export the thermal sensor types hwmon/w83627ehf: Enable VBAT monitoring hwmon/w83627ehf: Add support for the VID inputs hwmon/w83627ehf: Fix timing issues hwmon/w83627ehf: Add error messages for two error cases hwmon/w83627ehf: Convert to a platform driver hwmon/w83627ehf: Update the Kconfig entry make coretemp_device_remove() static hwmon: Add LM93 support hwmon: Improve the pwmN_enable documentation hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM hwmon: Add support for newer uGuru's hwmon/f71805f: Add temperature-tracking fan control mode hwmon/w83627ehf: Preserve speed reading when changing fan min hwmon: fix detection of abituguru volt inputs ... Manual fixup of trivial conflict in MAINTAINERS file
2007-07-19i2c: Delete the i2c-isa pseudo bus driverJean Delvare
There are no users of i2c-isa left, so we can finally get rid of it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19define new percpu interface for shared dataFenghua Yu
per cpu data section contains two types of data. One set which is exclusively accessed by the local cpu and the other set which is per cpu, but also shared by remote cpus. In the current kernel, these two sets are not clearely separated out. This can potentially cause the same data cacheline shared between the two sets of data, which will result in unnecessary bouncing of the cacheline between cpus. One way to fix the problem is to cacheline align the remotely accessed per cpu data, both at the beginning and at the end. Because of the padding at both ends, this will likely cause some memory wastage and also the interface to achieve this is not clean. This patch: Moves the remotely accessed per cpu data (which is currently marked as ____cacheline_aligned_in_smp) into a different section, where all the data elements are cacheline aligned. And as such, this differentiates the local only data and remotely accessed data cleanly. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Lameter <clameter@sgi.com> Cc: <linux-arch@vger.kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19mm: fault feedback #2Nick Piggin
This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17PTRACE_POKEDATA consolidationAlexey Dobriyan
Identical implementations of PTRACE_POKEDATA go into generic_ptrace_pokedata() function. AFAICS, fix bug on xtensa where successful PTRACE_POKEDATA will nevertheless return EPERM. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17PTRACE_PEEKDATA consolidationAlexey Dobriyan
Identical implementations of PTRACE_PEEKDATA go into generic_ptrace_peekdata() function. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16dma-mapping: prevent dma dependent code from linking on !HAS_DMA archsDan Williams
Continuing the work started in 411f0f3edc141a582190d3605cadd1d993abb6df ... This enables code with a dma path, that compiles away, to build without requiring additional code factoring. It also prevents code that calls dma_alloc_coherent and dma_free_coherent from linking whereas previously the code would hit a BUG() at run time. Finally, it allows archs that set !HAS_DMA to delete their asm/dma-mapping.h file. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <geert@linux-m68k.org> Cc: <zippel@linux-m68k.org> Cc: <spyro@f2s.com> Cc: <ysato@users.sourceforge.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-19all-archs: consolidate .data section definition in asm-genericSam Ravnborg
With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19all-archs: consolidate .text section definition in asm-genericSam Ravnborg
Move definition of .text section to asm-generic. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-11m32r: fix tme_handler to check _PAGE_PRESENT bitHirokazu Takata
Fix the tlb-miss handler (tme_handler) to check _PAGE_PRESENT bit in order to handle file-mapped or swapped-out pages correctly. This patch is required to fix unexpected page errors for m32r. Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11m32r: fix switch_to macro to push/pop frame pointer if neededHirokazu Takata
This patch fixes a rarely-happened but severe scheduling problem of the recent m32r kernel of 2.6.17-rc3 or later. In the following previous m32r patch, the switch_to macro was modified not to do unnecessary push/pop operations for tuning. > [PATCH] m32r: update switch_to macro for tuning > 4127272c38619c56f0c1aa01d01c7bd757db70a1 In this modification, only 'lr' and 'sp' registers are push/pop'ed, assuming that the m32r kernel is always compiled with -fomit-frame-pointer option. However, in 2.6 kernel, kernel/sched.c is irregularly compiled with -fno-omit-frame-pointer if CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not defined. -- kernel/Makefile -- : ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is # needed for x86 only. Why this used to be enabled for all architectures is beyond # me. I suspect most platforms don't need this, but until we know that for sure # I turn this off for IA-64 only. Andreas Schwab says it's also needed on m68k # to get a correct value for the wait-channel (WCHAN in ps). --davidm CFLAGS_sched.o := $(PROFILING) -fno-omit-frame-pointer endif : --- Therefore, for the recent m32r kernel, we have to push/pop 'fp' (frame pointer) if CONFIG_FRAME_POINTER is defined or CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not defined. Signed-off-by: Hitoshi Yamamoto <hitoshiy@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02[PATCH] x86: Allow percpu variables to be page-alignedJeremy Fitzhardinge
Let's allow page-alignment in general for per-cpu data (wanted by Xen, and Ingo suggested KVM as well). Because larger alignments can use more room, we increase the max per-cpu memory to 64k rather than 32k: it's getting a little tight. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-02-17Various typo fixes.Robert P. J. Day
Correct mis-spellings of "algorithm", "appear", "consistent" and (shame, shame) "kernel". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-12[PATCH] Dynamic kernel command-line: m32rAlon Bar-Lev
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] sort the devres mess outAl Viro
* Split the implementation-agnostic stuff in separate files. * Make sure that targets using non-default request_irq() pull kernel/irq/devres.o * Introduce new symbols (HAS_IOPORT and HAS_IOMEM) defaulting to positive; allow architectures to turn them off (we needed these symbols anyway for dependencies of quite a few drivers). * protect the ioport-related parts of lib/devres.o with CONFIG_HAS_IOPORT. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] Consolidate bust_spinlocks()Kirill Korotaev
Part of long forgotten patch http://groups.google.com/group/fa.linux.kernel/msg/e98e941ce1cf29f6?dmode=source Since then, m32r grabbed two copies. Leave s390 copy because of important absence of CONFIG_VT, but remove references to non-existent timerlist_lock. ia64 also loses timerlist_lock. Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] Consolidate default sched_clock()Alexey Dobriyan
Use attribute(weak). Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] disable init/initramfs.c: architecturesJean-Paul Saman
Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs when CONFIG_BLK_DEV_INITRAMFS is not selected. This saves another 4 kbytes on most platfoms (some reserve PAGE_SIZE for initramfs). Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] m32r: cosmetic updates and trivial fixesHirokazu Takata
Cosmetic updates and trivial fixes of m32r arch-dependent files. - Remove RCS ID strings and trailing white lines - Other misc. cosmetic updates Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] m32r: fix kernel entry address of vmlinuxHirokazu Takata
This patch fixes the kernel entry point address of vmlinux. The m32r kernel entry address is 0x08002000 (physical). But, so far, the ENTRY point written in vmlinux.lds.S was not point the correct kernel entry address. (before fix) $ objdump -x vmlinux vmlinux: file format elf32-m32r-linux vmlinux architecture: m32r2, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x88002090 /* NG */ : Sections: Idx Name Size VMA LMA File off Algn 0 .empty_zero_page 00001000 88001000 88001000 00001000 2**12 CONTENTS, ALLOC, LOAD, DATA 1 .boot 0000008c 88002000 88002000 00002000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .text 001ab694 88002090 88002090 00002090 2**4 CONTENTS, ALLOC, LOAD, READONLY, CODE : (after fix) $ objdump -x vmlinux vmlinux: file format elf32-m32r-linux vmlinux architecture: m32r2, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x08002000 /* OK */ : This fix also remedies the following GDB error message (of gdb-6.4 or after) at the first operation of kernel debugging: "Previous frame identical to this frame (corrupt stack?)". Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] m32r: update defconfig files for v2.6.19Hirokazu Takata
This patch upgrades defconfig files for all m32r platforms. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] m32r: fix do_page_fault and update_mmu_cacheHirokazu Takata
Fix do_page_fault and update_mmu_cache. * Fix do_page_fault (vmalloc_fault:) to pass error_code correctly to update_mmu_cache by using a thread-fault code for all m32r chips. * Fix update_mmu_cache for OPSP chip - #ifdef CONFIG_CHIP_OPSP portion is a workaround of OPSP; Add a notfound-case operation to update_mmu_cache for OPSP like other m32r chip. - Fix pte_data that was not initialized if no entry found. Signed-off-by: Kazuhiro Inaoka <inaoka@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] m32r: build fix for processors without ISA_DSP_LEVEL2Hirokazu Takata
Additional fixes for processors without ISA_DSP_LEVEL2. sigcontext_t does not have dummy_acc1h, dummy_acc1l members any longer. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] Set CONFIG_ZONE_DMA for arches with GENERIC_ISA_DMAChristoph Lameter
As Andi pointed out: CONFIG_GENERIC_ISA_DMA only disables the ISA DMA channel management. Other functionality may still expect GFP_DMA to provide memory below 16M. So we need to make sure that CONFIG_ZONE_DMA is set independent of CONFIG_GENERIC_ISA_DMA. Undo the modifications to mm/Kconfig where we made ZONE_DMA dependent on GENERIC_ISA_DMA and set theses explicitly in each arches Kconfig. Reviews must occur for each arch in order to determine if ZONE_DMA can be switched off. It can only be switched off if we know that all devices supported by a platform are capable of performing DMA transfers to all of memory (Some arches already support this: uml, avr32, sh sh64, parisc and IA64/Altix). In order to switch ZONE_DMA off conditionally, one would have to establish a scheme by which one can assure that no drivers are enabled that are only capable of doing I/O to a part of memory, or one needs to provide an alternate means of performing an allocation from a specific range of memory (like provided by alloc_pages_range()) and insure that all drivers use that call. In that case the arches alloc_dma_coherent() may need to be modified to call alloc_pages_range() instead of relying on GFP_DMA. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-11[PATCH] Change cpu_up and co from __devinit to __cpuinitGautham R Shenoy
Compiling the kernel with CONFIG_HOTPLUG = y and CONFIG_HOTPLUG_CPU = n with CONFIG_RELOCATABLE = y generates the following modpost warnings WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141b7d) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141b9c) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.text:__cpu_up from .text between '_cpu_up' (at offset 0xc0141bd8) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c05) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c26) and 'cpu_up' WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between '_cpu_up' (at offset 0xc0141c37) and 'cpu_up' This is because cpu_up, _cpu_up and __cpu_up (in some architectures) are defined as __devinit AND __cpu_up calls some __cpuinit functions. Since __cpuinit would map to __init with this kind of a configuration, we get a .text refering .init.data warning. This patch solves the problem by converting all of __cpu_up, _cpu_up and cpu_up from __devinit to __cpuinit. The approach is justified since the callers of cpu_up are either dependent on CONFIG_HOTPLUG_CPU or are of __init type. Thus when CONFIG_HOTPLUG_CPU=y, all these cpu up functions would land up in .text section, and when CONFIG_HOTPLUG_CPU=n, all these functions would land up in .init section. Tested on a i386 SMP machine running linux-2.6.20-rc3-mm1. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] LOG2: Implement a general integer log2 facility in the kernelDavid Howells
This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] m32r: bootloader support for OPSPUT platformHirokazu Takata
This patch supports "m32r-g00ff" bootloader for an OPSPUT platform. Applying this patch, it is possible to do ATA-boot from an IDE drive or HTTP-boot from network by m32r-g00ff. * arch/m32r/boot/compressed/m32r_sio.c: Fix hangup on OPSPUT at boot. * arch/m32r/kernel/io_opsput.c: IDE support for OPSPUT. * arch/m32r/kernel/setup_opsput.c: ditto. * include/asm-m32r/ide.h: ditto. Signed-off-by: Kazuhiro Inaoka <inaoka@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] m32r: fix ace_handler to pass full 32-bit addressHirokazu Takata
Don't mask the lower 12-bit of the page fault address. In the current m32r kernel implementation, we use an access exception to detect page faults. This patch fixes ace_handler (access exception handler) for m32r. In order to check userspace address in do_page_fault, we have to pass full 32-bit address to do_page_fault. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08[PATCH] m32r: make userspace headers platform-independentHirokazu Takata
The m32r kernel 2.6.18-rc1 or after cause build errors of "unknown isa configuration" for userspace application programs, such as glibc, gdb, etc. This is because the recent kernel do not include linux/config.h not to expose kernel headers for userspace. To fix the above compile errors, this patch fixes two headers ptrace.h and sigcontext.h for m32r and makes them platform-independent. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] initrd: remove unused false condition for initrd_startHenry Nestler
After LOADER_TYPE && INITRD_START are true, the short if-condition for INITRD_START can never be false. Remove unused code from the else condition. Signed-off-by: Henry Nestler <henry.ne@arcor.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] Add include/linux/freezer.h and move definitions from sched.hNigel Cunningham
Move process freezing functions from include/linux/sched.h to freezer.h, so that modifications to the freezer or the kernel configuration don't require recompiling just about everything. [akpm@osdl.org: fix ueagle driver] Signed-off-by: Nigel Cunningham <nigel@suspend2.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-02[NET]: M32R checksum annotations and cleanups.Al Viro
* sanitize prototypes, annotate * ntohs -> shift in checksum calculations in l-e case * kill shift-by-16 in checksum calculations Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-27[PATCH] vmlinux.lds: consolidate initcall sectionsAndrew Morton
Add a vmlinux.lds.h helper macro for defining the eight-level initcall table, teach all the architectures to use it. This is a prerequisite for a patch which performs initcall synchronisation for multithreaded-probing. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> [ Added AVR32 as well ] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] m32r: more __user annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] m32r: NULL noise removalAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>