summaryrefslogtreecommitdiffstats
path: root/arch/m68k
AgeCommit message (Collapse)Author
2011-12-24m68k: remove duplicate asm offset for task thread.infoGreg Ungerer
We have a duplicate name and definition for the offset of the thread.info struct within the task struct in our asm-offsets.c code. Remove one of them, and consolidate to use a single define, TASK_INFO. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68k: merge the init_task code for mmu and non-mmu targetsGreg Ungerer
The init_task code can be the same for both mmu and non-mmu targets. None of the alignment carried out in the the current init_task code is necessary. The linker script takes care of aligning the init_thread structure to a THREAD SIZE boundary, and that is all we need. So use the init_task.c code for all target types, that makes m68k code consistent with what most other architectures do. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68knommu: remove unused fasthandler declarationGreg Ungerer
The fasthandler code was removed long ago. Remove the now unused declaration of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: Fall back to __gpio_to_irq() for non-arch GPIOsMark Brown
gpiolib provides __gpio_to_irq() to map gpiolib gpios to interrupts - hook that up on m68k. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24clocksource: m86k: Convert to clocksource_register_hz/khzjohn stultz
Updated to merge the valid bits of the two m68k patches. This converts the m86k clocksources to use clocksource_register_hz/khz This is untested, so any assistance in testing would be appreciated! CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Greg Ungerer <gerg@uclinux.org> Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/bluetooth/l2cap_core.c Just two overlapping changes, one added an initialization of a local variable, and another change added a new local variable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-21m86k: gpio - convert sysdev_class to a regular subsystemKay Sievers
After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21Merge branch 'master' into pm-sleepRafael J. Wysocki
* master: (848 commits) SELinux: Fix RCU deref check warning in sel_netport_insert() binary_sysctl(): fix memory leak mm/vmalloc.c: remove static declaration of va from __get_vm_area_node ipmi_watchdog: restore settings when BMC reset oom: fix integer overflow of points in oom_badness memcg: keep root group unchanged if creation fails nilfs2: potential integer overflow in nilfs_ioctl_clean_segments() nilfs2: unbreak compat ioctl cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask evm: prevent racing during tfm allocation evm: key must be set once during initialization mmc: vub300: fix type of firmware_rom_wait_states module parameter Revert "mmc: enable runtime PM by default" mmc: sdhci: remove "state" argument from sdhci_suspend_host x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT IB/qib: Correct sense on freectxts increment and decrement RDMA/cma: Verify private data length cgroups: fix a css_set not found bug in cgroup_attach_proc oprofile: Fix uninitialized memory access when writing to writing to oprofilefs Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel" ... Conflicts: kernel/cgroup_freezer.c
2011-12-10m68k: Don't comment out syscalls used by glibcAndreas Schwab
Define again the syscalls that are used by glibc so that it is possible to compile a feature-complete glibc with the newest kernel headers. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/atari: Move declaration of atari_SCC_reset_done to header fileGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/serial: Remove references to obsolete CONFIG_SERIAL167Geert Uytterhoeven
commit 51c9d654c2def97827395a7fbfd0c6f865c26544 ("Staging: delete tty drivers") removed the MVME167 serial driver, but forgot to remove these references. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/hp300: Export hp300_ledstateGeert Uytterhoeven
The accidental loss of CONFIG_DIO in commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") exposed a missing symbol export in m68k allmodconfig. If CONFIG_HP300=y but CONFIG_HPLANCE (which is bool, and depends on CONFIG_DIO) is not set, and CONFIG_MVME147=y and CONFIG_MVME147_NET=m, 7990.c is compiled as a module, giving: ERROR: "ledstate" [drivers/net/ethernet/amd/7990.ko] undefined! Add the missing export, and rename ledstate to hp300_ledstate while we're at it, as it's a too generic name. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k: Initconst section fixesAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup macro caseFinn Thain
Code style convention has macro names in uppercase. Change MAC_VIA_IIci to MAC_VIA_IICI. Also remove an obsolete comment. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10mac_scsi: fix mac_scsi on some powerbooksFinn Thain
Fix the mac_scsi interrupt edge trigger on non-RBV PowerBooks. This doesn't appear to help my PowerBook 520 but the NetBSD source reveals that the PowerBook 500 series is different than the others. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix powerbook 150 adb_typeFinn Thain
The PowerBook 150 is a actually a Duo underneath. Fix the adb_type. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix baboon irq disable and shutdownFinn Thain
The baboon_disabled hack is broken because it is missing an irq shutdown method. So releasing a Baboon irq kills the other Baboon irqs. But we don't really need this hack because we don't have media bay support and TREX uses a NuBus IRQ. Remove it. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: oss irq fixesFinn Thain
The IOP driver calls into the OSS driver to enable its IRQ. This undesirable coupling between drivers only exists because the OSS driver doesn't correctly handle all of its machspec IRQs. Fix OSS handling of enable/disable for VIA1 IRQs (8 thru 15) which includes MAC_IRQ_ADB. Back when I implemented pmac_zilog support I redefined IRQ_MAC_SCC incorrectly. Change this to a machspec IRQ so that it works on OSS. Clean up the unused OSS audio IRQ and OSS_IRQLEV_* cruft that only confuses things. Fix the OSS description in macints.c and remove an obsolete comment. Don't enable the VIA1 irq before registering the handler. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix nubus slot irq disable and shutdownFinn Thain
Improve NuBus slot interrupt handling code and documentation. This patch fixes the NuBus NIC (mac8390) in my Quadra 700. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: enable via_alt_mapping on performa 580Finn Thain
Enable via_alt_mapping on the Performa 588 and tidy up related documentation. I'm betting that remapped IRQs work just fine on the Performa 580 series since it works on the LC 630 and the logic board part numbers are reputedly the same. And the consensus seems to be that the Mac TV is essentially a Performa 550, not dissimilar to the Performa 520, so set the via_type accordingly. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup forward declarationsFinn Thain
Move some forward declarations into header files and adjust includes. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup mac_irq_pendingFinn Thain
mac_irq_pending() has only one caller (mac_esp.c). Nothing tests for Baboon, PSC or OSS pending interrupts. Until that need arises, let's keep it simple and remove all the unused abstraction. Replace it with a routine to check for SCSI DRQ. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup mac_clear_irqFinn Thain
mac_clear_irq() is dead code and has been dead for as long as I can recall. On certain Mac models, certain irqs can't be cleared this way. Outside of irq dispatch, this code appears be unusable without busy loops or worse, and for irq dispatch we duplicate the same logic. Remove mac_clear_irq() and supporting code. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: early consoleFinn Thain
Revive the old mac_serial_print() routine as mac_early_print(). mac_serial_print() did not function because it did not use the right offsets for its stack arguments. Fix this and make compilation conditional on CONFIG_EARLY_PRINTK instead of the obscure MAC_SERIAL_DEBUG macro. Give mac_early_print() a new string length parameter to fit the early console API. Send output to the framebuffer as well as serial ports. Change the line rate to 38400 baud to match the default for the real (pmac_zilog) serial console. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mvme16x: Add support for EARLY_PRINTKKars de Jong
Added support for EARLY_PRINTK when running on an MVME16x board. Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/serial: SERIAL_PORT_DFNS only if CONFIG_ISAKars de Jong
Only define SERIAL_PORT_DFNS when CONFIG_ISA is defined. Otherwise the first 4 slots in the 8250 driver are unavailable on non-ISA machines. Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-06m68k: Wire up process_vm_{read,write}vGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-12-05Merge branch 'fortglx/3.3/tip/timers/core' of ↵Thomas Gleixner
git://git.linaro.org/people/jstultz/linux into timers/core
2011-11-24lib: move GENERIC_IOMAP to lib/KconfigMichael S. Tsirkin
define GENERIC_IOMAP in a central location instead of all architectures. This will be helpful for the follow-up patch which makes it select other configs. Code is also a bit shorter this way. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-11-21clocksource: m86k: Convert to clocksource_register_hz/khzJohn Stultz
This converts the m86k clocksources to use clocksource_register_hz/khz CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Greg Ungerer <gerg@uclinux.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: John Stultz <johnstul@us.ibm.com>
2011-11-21freezer: remove now unused TIF_FREEZETejun Heo
Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org
2011-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The forcedeth changes had a conflict with the conversion over to atomic u64 statistics in net-next. The libertas cfg.c code had a conflict with the bss reference counting fix by John Linville in net-next. Conflicts: drivers/net/ethernet/nvidia/forcedeth.c drivers/net/wireless/libertas/cfg.c
2011-11-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: include/net/bluetooth/bluetooth.h
2011-11-09net: add wireless TX status socket optionJohannes Berg
The 802.1X EAPOL handshake hostapd does requires knowing whether the frame was ack'ed by the peer. Currently, we fudge this pretty badly by not even transmitting the frame as a normal data frame but injecting it with radiotap and getting the status out of radiotap monitor as well. This is rather complex, confuses users (mon.wlan0 presence) and doesn't work with all hardware. To get rid of that hack, introduce a real wifi TX status option for data frame transmissions. This works similar to the existing TX timestamping in that it reflects the SKB back to the socket's error queue with a SCM_WIFI_STATUS cmsg that has an int indicating ACK status (0/1). Since it is possible that at some point we will want to have TX timestamping and wifi status in a single errqueue SKB (there's little point in not doing that), redefine SO_EE_ORIGIN_TIMESTAMPING to SO_EE_ORIGIN_TXSTATUS which can collect more than just the timestamp; keep the old constant as an alias of course. Currently the internal APIs don't make that possible, but it wouldn't be hard to split them up in a way that makes it possible. Thanks to Neil Horman for helping me figure out the functions that add the control messages. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-08m68k/mac: Remove mac_irq_{en,dis}able() wrappersFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete support for user vector interrupt fixupsGeert Uytterhoeven
It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete m68k irq frameworkGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/q40: Convert Q40/Q60 to genirqGeert Uytterhoeven
q40_irq_handler() must be kept to translate ISA IRQs to the range 1-15. q40_probe_irq_o{ff,n}() become unused. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Zidlicky <rz@linux-m68k.org>
2011-11-08m68k/sun3: Convert Sun3/3x to genirqGeert Uytterhoeven
Replace the custom irq handler that masks the irq and calls do_IRQ(), and the unmasking in the individual handlers, by handle_level_irq(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sam Creasey <sammy@sammy.net>
2011-11-08m68k/sun3: Use the kstat_irqs_cpu() wrapperGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Creasey <sammy@sammy.net>
2011-11-08m68k/apollo: Convert Apollo to genirqGeert Uytterhoeven
Replace the custom user vector interrupt handler that calls do_IRQ() and does an EOI by handle_fasteoi_irq(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter De Schrijver <p2@debian.org>
2011-11-08m68k/vme: Convert VME to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Hirst <rhirst@parisc-linux.org>
2011-11-08m68k/hp300: Convert HP9000/300 and HP9000/400 to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Philip Blundell <philb@gnu.org>
2011-11-08m68k/mac: Optimize interrupts using chain handlersGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/mac: Convert Mac to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/amiga: Optimize interrupts using chain handlersGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/amiga: Convert Amiga to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/amiga: Refactor amiints.cGeert Uytterhoeven
- Remove filename in comments, - Reorder functions so we no longer need forward declarations. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/atari: Remove code and comments about different irq typesGeert Uytterhoeven
This code was obsoleted during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/atari: Convert Atari to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [v1] Acked-by: Thomas Gleixner <tglx@linutronix.de>