summaryrefslogtreecommitdiffstats
path: root/arch/m68knommu/platform
AgeCommit message (Collapse)Author
2009-06-11m68knommu: remove obsolete reset codeGreg Ungerer
All ColdFire and non-MMU 68k code has custom reset routines. Remove the obsolete and now un-used reset macros. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 5272 ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 528x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 527x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 523x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: move CPU reset code for the 520x ColdFire into its platform codeGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 532x ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5249 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5206e ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5206 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5407 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-06-11m68knommu: add CPU reset code for the 5307 ColdFireGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-22m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.Richard Retanubun
This processor only have one FEC and its MDIO pins are located at a different offset than the code used for the current CONFIG_M527x. Tesed on M5271EVB eval platform. Without this patch the FEC driver will report no PHY attached if the bootloader does not pre-initialize the PAR_FECI2C GPIO register. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (41 commits) m68knommu: improve compile arch switch settings m68knommu: fix 5407 ColdFire UART vector setup m68knommu: fix 5307 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART vector setup m68knommu: fix 5249 ColdFire UART setup m68knommu: fix end of uart table marker m68knommu: switch to using generic_handle_irq() m68k: merge the mmu and non-mmu versions of tlbflush.h m68knommu: introduce basic clk infrastructure m68k: merge the mmu and non-mmu versions of module.h m68knommu: add missing interrupt line definition for UART 2 m68k: merge the mmu and non-mmu versions of mmu_context.h m68k: merge the mmu and non-mmu versions of current.h m68k: merge the mmu and non-mmu versions of div64.h m68k: merge the mmu and non-mmu versions of bugs.h m68k: merge the mmu and non-mmu versions of bug.h m68k: use the mmu version of cache.h for m68knommu as well m68k: use the mmu version of bootinfo.h for m68knommu as well m68k: merge the mmu and non-mmu versions of fb.h m68k: merge the mmu and non-mmu versions of segment.h ...
2009-03-26Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/net/wimax/i2400m/usb-notif.c
2009-03-24m68knommu: fix 5407 ColdFire UART vector setupGreg Ungerer
There is a couple of problems with the UART vector setup for the 5307 ColdFire UART. The ICR register access should be 8bit, not 32bit. The address of the UIVR register is wrong, it needs to be offset into the MBAR register region. Fix these. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix 5307 ColdFire UART vector setupGreg Ungerer
There is a couple of problems with the UART vector setup for the 5307 ColdFire UART. The ICR register access should be 8bit, not 32bit. The address of the UIVR register is wrong, it needs to be offset into the MBAR register region. Fix these. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix 5249 ColdFire UART vector setupGreg Ungerer
The address of the IVUR register is not correct, it should be offset into the MBAR region. Without this the vector is not set to the correct number. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix 5249 ColdFire UART setupGreg Ungerer
The ICR registers of the 5249 ColdFire processor are 8bits, not 32bits. Fix the read/write of these register to be the correct size. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: fix end of uart table markerGreg Ungerer
The UART platform data structure is missing an empty struct at the end (as the end of structure marker). Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-24m68knommu: introduce basic clk infrastructureGreg Ungerer
Create basic support for clk API. Recent changes to the FEC driver (used by many ColdFire family parts) need this. Initially only supports getting the master clock frequency. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-03-10m68knommu: m528x build fixSteven King
There isn't any mcfqspi.h in the tree, and without it everything inside the #ifdef CONFIG_SPI is uncompilable. Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-10m68knommu: m5206e build fixSteven King
Signed-off-by: Steven King <sfking@fdwdc.com> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-26fec: add FEC platform support to ColdFire CPU's setup codeGreg Ungerer
m68knommu: add FEC platform support to ColdFire CPU's setup code Move the per-CPU FEC driver setup code into the actual platform setup code for each ColdFire CPU varient. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-27m68knommu: fix 5329 ColdFire periphal addressingMatt Waddel
The 5329 ColdFire peripheral IO register addresses are not relative to the MBAR register. So fix the serial platform setup array and IRQ acking to use just the direct addresses. Signed-off-by: Matt Waddel <Matt.Waddel@freescale.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-01-27m68knommu: remove obsolete and unused eLIA boardAdrian Bunk
Greg Ungerer said about this board: Only ever a handful where made, and that was in 1999. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2009-01-27m68knommu: use one exist from execptionSebastian Siewior
Part of the code that did not make sense to me got removed by Greg. This is part two: The first compare is to check whether the interrupts are disabled or not. Depending on the result we exectute the RESTORE_ALL macro is not only restoring the stack but also returning to caller. The test for pending softirq has been removed because it is allready done in irq_exit(). Since system_call() is allso using the SAVE_ALL macro and returning via ret_from_exception label I see no reason why we could not do this here as well. This is also handy because if we return from the timer interrupt and we need to resched than we check for this :) Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-12-13cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell
Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2008-07-23m68knommu: put ColdFire head code into .text.head sectionGreg Ungerer
Switch the ColdFire head start up code to be in the .text.head segment. And make sure that segment is at the start of the final linked text segment. Fixes the linker warnings about section use mis-matches: WARNING: vmlinux.o(.text+0xa8): Section mismatch in reference from the variable _clear_bss to the function .init.text:start_kernel() The function _clear_bss() references the function __init start_kernel(). This is often because _clear_bss lacks a __init annotation or the annotation of start_kernel is wrong. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: MCF5307 PIT GENERIC_CLOCKEVENTS supportSebastian Siewior
The PIT code has been changed in order to suppport GENERIC_CLOCKEVENTS. The priority of the PIT clocksource has been decreased in favor of the DMA timer. pit_cycles_per_jiffy become a constant (PIT_CYCLES_PER_JIFFY) because it is known at compile time and does not change afterwards. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: add sched_clock() for the DMA timerSebastian Siewior
with this printk() and other sched_clock() user use the more precise timestamps. The highly optimized math is from arch/x86/kernel/tsc_32.c. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-07-23m68knommu: Add Coldfire DMA Timer supportSebastian Siewior
This one could be used as a hrtimer. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2008-06-12m68knommu: init coldfire timer TRR with n - 1, not nPhilippe De Muyter
The coldfire timer must be initialised to n - 1 if we want it to count n cycles between each tick interrupt. This was already fixed, but has been lost with the conversion to GENERIC_TIMER. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Acked-by: Greg Ungerer <gerg@snapgear.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: fix compare race in sched related codeSebastian Siewior
The interrupts must be disabled before considering the need resched bit of the task struct and they have to be disabled before calling schedule() Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: remove unused CONFIG_DISKtelGreg Ungerer
Remove unused CONFIG_DISKtel support. Missing config definition pointed out by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: add WilFire and WildfireMod board supportSteve Bennett
This patch adds linux-2.6.x kernel support for the Intec Automation ColdFire 5282-based boards, the WildFire and WildFireMod Signed-Off-By: Steve Bennett <steveb@workware.net.au> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: remove unused CONFIG_MTD_KeyTechnologyGreg Ungerer
Remove unused board type CONFIG_MTD_KeyTechnology. Pointed out by Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: fix 5206e UART init function namingGreg Ungerer
Fix ColdFire 5206e platform UART init function naming. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-01m68knommu: ColdFire add support for kernel preemptionSebastian Siewior
As the subject says this patch adds the support for kernel preemption on m68knommu Coldfire. I thing the same changes could be applied to 68360 & 68328 but since I don't have the HW for testing, I don't touch it. Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-04m68knommu: remove duplicate hw_tick() codeGreg Ungerer
Remove duplicate hw_tick() function from 68328 timers code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14m68knommu: fix profile timerMatt Waddel
I was looking at timers in the Coldfire system and I noticed that the CONFIG_HIGHPROFILE option seems to be a little out of date. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14m68knommu: use asflags instead of EXTRA_AFLAGSGreg Ungerer
Modify the extra asm flags for debugger capabilities, use asflags instead for EXTRA_AFLAGS. Suggestion from Sam Ravnborg. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14m68knommu: fix coldfire interrupt exit pathWalter T Gruczka
Remove bogus conditional jump in return from interrupt path. Reorder the code path now that is not there. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove dead timer int pending codeGreg Ungerer
Remove all the dead timer interrupt checking functions for the ColdFire CPU "timers" hardware that are not used after switching to GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: remove empty timer offset function for 68360Greg Ungerer
Switching to GENERIC_TIME means we no longer need the empty timer offset function for the 68360 CPU. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch ColdFire TIMER to use GENERIC_TIMEGreg Ungerer
Switch the ColdFire TIMER timer to use GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch ColdFire PIT timer to use GENERIC_TIMEGreg Ungerer
Switch the ColdFire PIT timer to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: switch 68328 timer to use GENERIC_TIMEGreg Ungerer
Switch the 68328 CPU timer code to using GENERIC_TIME. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-01m68knommu: create common DMA table for ColdFire CPUsGreg Ungerer
Move the ColdFire DMA address table into its own file, and out of each of the different CPU config files. No need to have a copy of it in each of the config setup files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 11:21:24 +0000