| Age | Commit message (Collapse) | Author |
|---|
|
This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
The generic code always get the device-node in the right place now
so a single implementation will work for all archs
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
All archs do more or less the same thing now, move it into
a single generic place.
I chose pci.h rather than of_pci.h to avoid having to change
all call-sites to include the later.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
There's no point in keeping this separate. Even if microblaze grows
a 64-bit variant, it will probably be able to re-use that code as-is
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|
The whole business with re-assigning all bus numbers, creating
an OF bus "map" etc... is ancient powermac stuff that you really
don't care about on microblaze.
Similarly pci_device_from_OF_node() is unused and by getting rid
of it we can get rid of a whole lot of code otherwise unused on
this architecture
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Michal Simek <monstr@monstr.eu>
|
|
powerpc has two different ways of matching PCI devices to their
corresponding OF node (if any) for historical reasons. The ppc64 one
does a scan looking for matching bus/dev/fn, while the ppc32 one does a
scan looking only for matching dev/fn on each level in order to be
agnostic to busses being renumbered (which Linux does on some
platforms).
This removes both and instead moves the matching code to the PCI core
itself. It's the most logical place to do it: when a pci_dev is created,
we know the parent and thus can do a single level scan for the matching
device_node (if any).
The benefit is that all archs now get the matching for free. There's one
hook the arch might want to provide to match a PHB bus to its device
node. A default weak implementation is provided that looks for the
parent device device node, but it's not entirely reliable on powerpc for
various reasons so powerpc provides its own.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
* setns:
ns: Wire up the setns system call
Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call
|
|
32bit and 64bit on x86 are tested and working. The rest I have looked
at closely and I can't find any problems.
setns is an easy system call to wire up. It just takes two ints so I
don't expect any weird architecture porting problems.
While doing this I have noticed that we have some architectures that are
very slow to get new system calls. cris seems to be the slowest where
the last system calls wired up were preadv and pwritev. avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h. frv is
behind with perf_event_open being the last syscall wired up. On h8300
the last system call wired up was epoll_wait. On m32r the last system
call wired up was fallocate. mn10300 has recvmmsg as the last system
call wired up. The rest seem to at least have syncfs wired up which was
new in the 2.6.39.
v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall conflicts.
v7: ported to Linus's latest post 2.6.39 tree.
> arch/blackfin/include/asm/unistd.h | 3 ++-
> arch/blackfin/mach-common/entry.S | 1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>
Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
ARM: 6945/1: Add unwinding support for division functions
ARM: kill pmd_off()
ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks
ARM: 6943/1: mm: use TTBR1 instead of reserved context ID
ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7
ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
ARM: add sendmmsg syscall
ARM: 6863/1: allow hotplug on msm
ARM: 6832/1: mmci: support for ST-Ericsson db8500v2
ARM: 6830/1: mach-ux500: force PrimeCell revisions
ARM: 6829/1: amba: make hardcoded periphid override hardware
ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID
ARM: 6827/1: mach-netx: delete hardcoded periphid
ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume
ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2
ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM
ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM
at91: drop at572d940hf support
at91rm9200: introduce at91rm9200_set_type to specficy cpu package
at91: drop boot_params and PLAT_PHYS_OFFSET
...
|
|
|
|
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT,
CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used
to test for existence of find bitops anymore.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fold all the mmu_gather rework patches into one for submission
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Tony Luck <tony.luck@intel.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
into devel-stable
|
|
master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource
Conflicts:
arch/ia64/kernel/cyclone.c
arch/mips/kernel/i8253.c
arch/x86/kernel/i8253.c
Reason: Resolve conflicts so further cleanups do not conflict further
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This patch drops the reference to a global 'cmd_line' variable from
early_init_dt_scan_chosen, and instead passes the pointer to the command
line string via the *data argument. Each architecture does something
slightly different with the initial command line, so it makes sense for
the architecture to be able to specify the variable name.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
Disable USB_ARCH_HAS_EHCI in arch Kconfig and enable it in usb Kconfig
Warning log:
warning: (MICROBLAZE) selects USB_ARCH_HAS_EHCI which has unmet
direct dependencies (USB_SUPPORT)
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6:
Fix common misspellings
|
|
* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix ftrace
microblaze: Wire up new syscalls
microblaze: Fix level/edge irq sensibility
|
|
- Do not trace idle loop which takes a lot time
- Fix cache handling in generic ftrace code
- Do not trace lib functions ashldi3, ashrdi3, lshrdi3
Functions are called from generic ftrace code which
can't be traced
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Hook up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Patches:
"microblaze: Convert to new irq function names"
sha (4adc192ec7d977c74c750320f289af9d61c1caca)
and
"microblaze: Use generic show_interrupts()"
sha(9d61c18b25726306c9231428c17db42e3ff29ba7)
should also setup edge/level in irq_set_chip_and_handler_name
name parameter.
Error log:
~ # cat /proc/interrupts
CPU0
2: 2 Xilinx INTC-Xilinx INTC eth0
3: 2 Xilinx INTC-Xilinx INTC eth0
4: 241 Xilinx INTC-Xilinx INTC timer
6: 108 Xilinx INTC-Xilinx INTC serial
Fixed:
~ # cat /proc/interrupts
CPU0
2: 2 Xilinx INTC-level eth0
3: 2 Xilinx INTC-level eth0
4: 238 Xilinx INTC-edge timer
6: 108 Xilinx INTC-level serial
Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
---
v2: Fix exchanged edge and level
|
|
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Namespace conversion scripted with coccinelle.
Also retrieve the irq type from irq_data in intc_enable_or_unmask()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This introduces CONFIG_GENERIC_FIND_BIT_LE to tell whether to use generic
implementation of find_*_bit_le() in lib/find_next_bit.c or not.
For now we select CONFIG_GENERIC_FIND_BIT_LE for all architectures which
enable CONFIG_GENERIC_FIND_NEXT_BIT.
But m68knommu wants to define own faster find_next_zero_bit_le() and
continues using generic find_next_{,zero_}bit().
(CONFIG_GENERIC_FIND_NEXT_BIT and !CONFIG_GENERIC_FIND_BIT_LE)
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
video: change to new flag variable
scsi: change to new flag variable
rtc: change to new flag variable
rapidio: change to new flag variable
pps: change to new flag variable
net: change to new flag variable
misc: change to new flag variable
message: change to new flag variable
memstick: change to new flag variable
isdn: change to new flag variable
ieee802154: change to new flag variable
ide: change to new flag variable
hwmon: change to new flag variable
dma: change to new flag variable
char: change to new flag variable
fs: change to new flag variable
xtensa: change to new flag variable
um: change to new flag variables
s390: change to new flag variable
mips: change to new flag variable
...
Fix up trivial conflict in drivers/hwmon/Makefile
|
|
Replace EXTRA_CFLAGS with ccflags-y.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits)
tty: serial: altera_jtaguart: Add device tree support
tty: serial: altera_uart: Add devicetree support
dt: eliminate of_platform_driver shim code
dt: Eliminate of_platform_{,un}register_driver
dt/serial: Eliminate users of of_platform_{,un}register_driver
dt/usb: Eliminate users of of_platform_{,un}register_driver
dt/video: Eliminate users of of_platform_{,un}register_driver
dt/net: Eliminate users of of_platform_{,un}register_driver
dt/sound: Eliminate users of of_platform_{,un}register_driver
dt/spi: Eliminate users of of_platform_{,un}register_driver
dt: uartlite: merge platform and of_platform driver bindings
dt: xilinx_hwicap: merge platform and of_platform driver bindings
ipmi: convert OF driver to platform driver
leds/leds-gpio: merge platform_driver with of_platform_driver
dt/sparc: Eliminate users of of_platform_{,un}register_driver
dt/powerpc: Eliminate users of of_platform_{,un}register_driver
dt/powerpc: move of_bus_type infrastructure to ibmebus
drivercore/dt: add a match table pointer to struct device
dt: Typo fix.
altera_ps2: Add devicetree support
...
|
|
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: (33 commits)
microblaze: Do not copy reset vectors/manual reset vector setup
microblaze: Fix _reset function
microblaze: Fix microblaze init vectors
microblaze: Fix circular headers dependency when ftrace is enabled.
microblaze: Fix typo in Kconfig
microblaze: Add missing export symbols for lib functions
microblaze: Fix /dev/zero corruption from __clear_user()
microblaze: Convert irq_chip to new functions
microblaze: Select GENERIC_HARDIRQS_NO_DEPRECATED
microblaze: Remove stale irq_chip.end
microblaze: Fix sparse warnings - signal.c
microblaze: Fix sparse warning - fault.c
microblaze: Fix missing microblaze specific syscalls declaration
microblaze: Fix sparse warnings - cache.c
microblaze: Fix sparse warning - cpuinfo.h
microblaze: Fix sparse warning - unwind.c
microblaze: Fix sparse warning - consistent_alloc function
microblaze: Fix sparse warnings - ptrace
microblaze: Fix sparse warning - sw_exceptions
microblaze: Fix sparse warning - timer.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
x86: Clean up apic.c and apic.h
x86: Remove superflous goal definition of tsc_sync
x86: dt: Correct local apic documentation in device tree bindings
x86: dt: Cleanup local apic setup
x86: dt: Fix OLPC=y/INTEL_CE=n build
rtc: cmos: Add OF bindings
x86: ce4100: Use OF to setup devices
x86: ioapic: Add OF bindings for IO_APIC
x86: dtb: Add generic bus probe
x86: dtb: Add support for PCI devices backed by dtb nodes
x86: dtb: Add device tree support for HPET
x86: dtb: Add early parsing of IO_APIC
x86: dtb: Add irq domain abstraction
x86: dtb: Add a device tree for CE4100
x86: Add device tree support
x86: e820: Remove conditional early mapping in parse_e820_ext
x86: OLPC: Make OLPC=n build again
x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection
x86: OLPC: Cleanup config maze completely
x86: OLPC: Hide OLPC_OPENFIRMWARE config switch
...
Fix up conflicts in arch/x86/platform/ce4100/ce4100.c
|
|
Reset vector can be setup by bootloader and kernel doens't need
to touch it. If you require to setup reset vector, please use
CONFIG_MANUAL_RESET_VECTOR throught menuconfig.
It is not possible to setup address 0x0 as reset address because
make no sense to set it up at all.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: John Williams <john.williams@petalogix.com>
|
|
If soft reset falls through with no hardware assisted reset, the best
we can do is jump to the reset vector and see what the bootloader left
for us.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: John Williams <john.williams@petalogix.com>
|
|
Microblaze vector table stores several vectors (reset, user exception,
interrupt, debug exception and hardware exception).
All these functions can be below address 0x10000. If they are, wrong
vector table is genarated because jump is not setup from two instructions
(imm upper 16bit and brai lower 16bit).
Adding specific offset prevent problem if address is below 0x10000.
For this case only brai instruction is used.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic
prototypes to use u32 types for the futex as this is the data type the
futex core code uses all over the place.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Darren Hart <darren@dvhart.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110311025058.GD26122@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The cmpxchg_futex_value_locked API was funny in that it returned either
the original, user-exposed futex value OR an error code such as -EFAULT.
This was confusing at best, and could be a source of livelocks in places
that retry the cmpxchg_futex_value_locked after trying to fix the issue
by running fault_in_user_writeable().
This change makes the cmpxchg_futex_value_locked API more similar to the
get_futex_value_locked one, returning an error code and updating the
original value through a reference argument.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile]
Acked-by: Tony Luck <tony.luck@intel.com> [ia64]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michal Simek <monstr@monstr.eu> [microblaze]
Acked-by: David Howells <dhowells@redhat.com> [frv]
Cc: Darren Hart <darren@dvhart.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110311024851.GC26122@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Remove compilation failure when ftrace in enabled.
Error log:
CC kernel/trace/power-traces.o
In file included from arch/microblaze/include/asm/irq.h:15,
from include/linux/irq.h:27,
from include/asm-generic/hardirq.h:12,
from arch/microblaze/include/asm/hardirq.h:15,
from include/linux/hardirq.h:7,
from include/linux/ftrace_event.h:7,
from include/trace/ftrace.h:19,
from include/trace/define_trace.h:96,
from include/trace/events/power.h:240,
from kernel/trace/power-traces.c:14:
include/linux/interrupt.h: In function '__raise_softirq_irqoff':
include/linux/interrupt.h:413: error: implicit declaration of function 'trace_softirq_raise'
In file included from include/trace/ftrace.h:554,
from include/trace/define_trace.h:96,
from include/trace/events/power.h:240,
from kernel/trace/power-traces.c:14:
include/trace/events/irq.h: In function 'ftrace_test_probe_irq_handler_entry':
include/trace/events/irq.h:37: error: implicit declaration of function 'check_trace_callback_type_irq_handler_entry'
include/trace/events/irq.h: In function 'ftrace_test_probe_irq_handler_exit':
include/trace/events/irq.h:67: error: implicit declaration of function 'check_trace_callback_type_irq_handler_exit'
include/trace/events/irq.h: In function 'ftrace_test_probe_softirq_entry':
include/trace/events/irq.h:112: error: implicit declaration of function 'check_trace_callback_type_softirq_entry'
include/trace/events/irq.h: In function 'ftrace_test_probe_softirq_exit':
include/trace/events/irq.h:126: error: implicit declaration of function 'check_trace_callback_type_softirq_exit'
include/trace/events/irq.h: In function 'ftrace_test_probe_softirq_raise':
include/trace/events/irq.h:140: error: implicit declaration of function 'check_trace_callback_type_softirq_raise'
make[5]: *** [kernel/trace/power-traces.o] Error 1
make[4]: *** [kernel/trace] Error 2
make[3]: *** [kernel] Error 2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
s/Exectuable/Executable/
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
|
|
Adding missing export symbols for loadable modules.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
A userland read of more than PAGE_SIZE bytes from /dev/zero results in
(a) not all of the bytes returned being zero, and
(b) memory corruption due to zeroing of bytes beyond the user buffer.
This is caused by improper constraints on the assembly __clear_user function.
The constrints don't indicate to the compiler that the pointer argument is
modified. Since the function is inline, this results in double-incrementing
of the pointer when __clear_user() is invoked through a multi-page read() of
/dev/zero.
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Acked-by: Michal Simek <monstr@monstr.eu>
CC: stable@kernel.org
|
|
Use proper irq_desc wrappers while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
All irq_chips converted.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
irq_chip.end got obsolete with the removal of __do_IRQ().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Michal Simek <monstr@monstr.eu>
LKML-Reference: <20110203004210.240154507@linutronix.de>
|
|
Warning log:
CHECK arch/microblaze/kernel/signal.c
arch/microblaze/kernel/signal.c:200:9: warning: Using plain integer as NULL pointer
arch/microblaze/kernel/signal.c:201:9: warning: incorrect type in initializer (different address spaces)
arch/microblaze/kernel/signal.c:201:9: expected void [noderef] *volatile __gu_val<asn:1>
arch/microblaze/kernel/signal.c:201:9: got void *<noident>
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Warning log:
CHECK arch/microblaze/mm/fault.c
arch/microblaze/mm/fault.c:51:6: warning: incorrect type in initializer (different address spaces)
arch/microblaze/mm/fault.c:51:6: expected unknown type 2const [noderef] *__gu_addr<asn:1>
arch/microblaze/mm/fault.c:51:6: got unsigned int *<noident>
arch/microblaze/mm/fault.c:68:6: warning: symbol 'bad_page_fault' was not declared. Should it be static?
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Warning log:
CHECK arch/microblaze/kernel/sys_microblaze.c
arch/microblaze/kernel/sys_microblaze.c:37:17: warning: symbol 'microblaze_vfork' was not declared. Should it be static?
arch/microblaze/kernel/sys_microblaze.c:43:17: warning: symbol 'microblaze_clone' was not declared. Should it be static?
arch/microblaze/kernel/sys_microblaze.c:50:17: warning: symbol 'microblaze_execve' was not declared. Should it be static?
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Warning log:
CHECK arch/microblaze/kernel/cpu/cache.c
arch/microblaze/kernel/cpu/cache.c:522:21: warning: symbol 'wb_msr' was not declared. Should it be static?
arch/microblaze/kernel/cpu/cache.c:538:21: warning: symbol 'wb_nomsr' was not declared. Should it be static?
arch/microblaze/kernel/cpu/cache.c:554:21: warning: symbol 'wt_msr' was not declared. Should it be static?
arch/microblaze/kernel/cpu/cache.c:569:21: warning: symbol 'wt_nomsr' was not declared. Should it be static?
arch/microblaze/kernel/cpu/cache.c:585:21: warning: symbol 'wt_msr_noirq' was not declared. Should it be static?
arch/microblaze/kernel/cpu/cache.c:600:21: warning: symbol 'wt_nomsr_noirq' was not declared. Should it be static?
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Warning log:
CHECK arch/microblaze/kernel/cpu/cpuinfo-static.c
arch/microblaze/include/asm/cpuinfo.h:101:21: warning: incorrect type in argument 1 (different signedness)
arch/microblaze/include/asm/cpuinfo.h:101:21: expected unsigned int const [usertype] *p
arch/microblaze/include/asm/cpuinfo.h:101:21: got int *[assigned] val
...
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Warning log:
CHECK arch/microblaze/kernel/unwind.c
arch/microblaze/kernel/unwind.c:186:6: warning: symbol 'microblaze_unwind_inner' was not declared. Should it be static?
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
Warning in dma.c was caused by incorrect type in consistent_alloc function.
Warning log:
CHECK arch/microblaze/kernel/dma.c
arch/microblaze/kernel/dma.c:53:26: warning: incorrect type in argument 1 (different base types)
arch/microblaze/kernel/dma.c:53:26: expected int [signed] gfp
arch/microblaze/kernel/dma.c:53:26: got restricted unsigned int [usertype] flag
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
