summaryrefslogtreecommitdiffstats
path: root/arch/mips/kvm
AgeCommit message (Collapse)Author
2014-08-29KVM: remove garbage arg to *hardware_{en,dis}ableRadim Krčmář
In the beggining was on_each_cpu(), which required an unused argument to kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten. Remove unnecessary arguments that stem from this. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-29KVM: static inline empty kvm_arch functionsRadim Krčmář
Using static inline is going to save few bytes and cycles. For example on powerpc, the difference is 700 B after stripping. (5 kB before) This patch also deals with two overlooked empty functions: kvm_arch_flush_shadow was not removed from arch/mips/kvm/mips.c 2df72e9bc KVM: split kvm_arch_flush_shadow and kvm_arch_sched_in never made it into arch/ia64/kvm/kvm-ia64.c. e790d9ef6 KVM: add kvm_arch_sched_in Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-21KVM: add kvm_arch_sched_inRadim Krčmář
Introduce preempt notifiers for architecture specific code. Advantage over creating a new notifier in every arch is slightly simpler code and guaranteed call order with respect to kvm_sched_in. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-05Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into kvmPaolo Bonzini
Patch queue for ppc - 2014-08-01 Highlights in this release include: - BookE: Rework instruction fetch, not racy anymore now - BookE HV: Fix ONE_REG accessors for some in-hardware registers - Book3S: Good number of LE host fixes, enable HV on LE - Book3S: Some misc bug fixes - Book3S HV: Add in-guest debug support - Book3S HV: Preload cache lines on context switch - Remove 440 support Alexander Graf (31): KVM: PPC: Book3s PR: Disable AIL mode with OPAL KVM: PPC: Book3s HV: Fix tlbie compile error KVM: PPC: Book3S PR: Handle hyp doorbell exits KVM: PPC: Book3S PR: Fix ABIv2 on LE KVM: PPC: Book3S PR: Fix sparse endian checks PPC: Add asm helpers for BE 32bit load/store KVM: PPC: Book3S HV: Make HTAB code LE host aware KVM: PPC: Book3S HV: Access guest VPA in BE KVM: PPC: Book3S HV: Access host lppaca and shadow slb in BE KVM: PPC: Book3S HV: Access XICS in BE KVM: PPC: Book3S HV: Fix ABIv2 on LE KVM: PPC: Book3S HV: Enable for little endian hosts KVM: PPC: Book3S: Move vcore definition to end of kvm_arch struct KVM: PPC: Deflect page write faults properly in kvmppc_st KVM: PPC: Book3S: Stop PTE lookup on write errors KVM: PPC: Book3S: Add hack for split real mode KVM: PPC: Book3S: Make magic page properly 4k mappable KVM: PPC: Remove 440 support KVM: Rename and add argument to check_extension KVM: Allow KVM_CHECK_EXTENSION on the vm fd KVM: PPC: Book3S: Provide different CAPs based on HV or PR mode KVM: PPC: Implement kvmppc_xlate for all targets KVM: PPC: Move kvmppc_ld/st to common code KVM: PPC: Remove kvmppc_bad_hva() KVM: PPC: Use kvm_read_guest in kvmppc_ld KVM: PPC: Handle magic page in kvmppc_ld/st KVM: PPC: Separate loadstore emulation from priv emulation KVM: PPC: Expose helper functions for data/inst faults KVM: PPC: Remove DCR handling KVM: PPC: HV: Remove generic instruction emulation KVM: PPC: PR: Handle FSCR feature deselects Alexey Kardashevskiy (1): KVM: PPC: Book3S: Fix LPCR one_reg interface Aneesh Kumar K.V (4): KVM: PPC: BOOK3S: PR: Fix PURR and SPURR emulation KVM: PPC: BOOK3S: PR: Emulate virtual timebase register KVM: PPC: BOOK3S: PR: Emulate instruction counter KVM: PPC: BOOK3S: HV: Update compute_tlbie_rb to handle 16MB base page Anton Blanchard (2): KVM: PPC: Book3S HV: Fix ABIv2 indirect branch issue KVM: PPC: Assembly functions exported to modules need _GLOBAL_TOC() Bharat Bhushan (10): kvm: ppc: bookehv: Added wrapper macros for shadow registers kvm: ppc: booke: Use the shared struct helpers of SRR0 and SRR1 kvm: ppc: booke: Use the shared struct helpers of SPRN_DEAR kvm: ppc: booke: Add shared struct helpers of SPRN_ESR kvm: ppc: booke: Use the shared struct helpers for SPRN_SPRG0-7 kvm: ppc: Add SPRN_EPR get helper function kvm: ppc: bookehv: Save restore SPRN_SPRG9 on guest entry exit KVM: PPC: Booke-hv: Add one reg interface for SPRG9 KVM: PPC: Remove comment saying SPRG1 is used for vcpu pointer KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr Michael Neuling (1): KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling Mihai Caraman (8): KVM: PPC: e500mc: Enhance tlb invalidation condition on vcpu schedule KVM: PPC: e500: Fix default tlb for victim hint KVM: PPC: e500: Emulate power management control SPR KVM: PPC: e500mc: Revert "add load inst fixup" KVM: PPC: Book3e: Add TLBSEL/TSIZE defines for MAS0/1 KVM: PPC: Book3s: Remove kvmppc_read_inst() function KVM: PPC: Allow kvmppc_get_last_inst() to fail KVM: PPC: Bookehv: Get vcpu's last instruction for emulation Paul Mackerras (4): KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled KVM: PPC: Book3S PR: Take SRCU read lock around RTAS kvm_read_guest() call KVM: PPC: Book3S: Make kvmppc_ld return a more accurate error indication Stewart Smith (2): Split out struct kvmppc_vcore creation to separate function Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8 Conflicts: Documentation/virtual/kvm/api.txt
2014-08-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM changes from Paolo Bonzini: "These are the x86, MIPS and s390 changes; PPC and ARM will come in a few days. MIPS and s390 have little going on this release; just bugfixes, some small, some larger. The highlights for x86 are nested VMX improvements (Jan Kiszka), optimizations for old processor (up to Nehalem, by me and Bandan Das), and a lot of x86 emulator bugfixes (Nadav Amit). Stephen Rothwell reported a trivial conflict with the tracing branch" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (104 commits) x86/kvm: Resolve shadow warnings in macro expansion KVM: s390: rework broken SIGP STOP interrupt handling KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table KVM: vmx: remove duplicate vmx_mpx_supported() prototype KVM: s390: Fix memory leak on busy SIGP stop x86/kvm: Resolve shadow warning from min macro kvm: Resolve missing-field-initializers warnings Replace NR_VMX_MSR with its definition KVM: x86: Assertions to check no overrun in MSR lists KVM: x86: set rflags.rf during fault injection KVM: x86: Setting rflags.rf during rep-string emulation KVM: x86: DR6/7.RTM cannot be written KVM: nVMX: clean up nested_release_vmcs12 and code around it KVM: nVMX: fix lifetime issues for vmcs02 KVM: x86: Defining missing x86 vectors KVM: x86: emulator injects #DB when RFLAGS.RF is set KVM: x86: Cleanup of rflags.rf cleaning KVM: x86: Clear rflags.rf on emulated instructions KVM: x86: popf emulation should not change RF KVM: x86: Clearing rflags.rf upon skipped emulated instruction ...
2014-07-28KVM: Rename and add argument to check_extensionAlexander Graf
In preparation to make the check_extension function available to VM scope we add a struct kvm * argument to the function header and rename the function accordingly. It will still be called from the /dev/kvm fd, but with a NULL argument for struct kvm *. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30MIPS: KVM: Remove dead code of TLB index error in kvm_mips_emul_tlbwr()Deng-Cheng Zhu
It's impossible to fall into the error handling of the TLB index after being masked by (KVM_MIPS_GUEST_TLB_SIZE - 1). Remove the dead code. Reported-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30MIPS: KVM: Skip memory cleaning in kvm_mips_commpage_init()Deng-Cheng Zhu
The commpage is allocated using kzalloc(), so there's no need of cleaning the memory of the kvm_mips_commpage struct and its internal mips_coproc. Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30MIPS: KVM: Rename files to remove the prefix "kvm_" and "kvm_mips_"Deng-Cheng Zhu
Since all the files are in arch/mips/kvm/, there's no need of the prefixes "kvm_" and "kvm_mips_". Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30MIPS: KVM: Remove unneeded volatileDeng-Cheng Zhu
The keyword volatile for idx in the TLB functions is unnecessary. Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30MIPS: KVM: Simplify functions by removing redundancyDeng-Cheng Zhu
No logic changes inside. Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30MIPS: KVM: Use KVM internal loggerDeng-Cheng Zhu
Replace printks with kvm_[err|info|debug]. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30MIPS: KVM: Reformat code and commentsDeng-Cheng Zhu
No logic changes inside. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-25MIPS: KVM: Fix memory leak on VCPUDeng-Cheng Zhu
kvm_arch_vcpu_free() is called in 2 code paths: 1) kvm_vm_ioctl() kvm_vm_ioctl_create_vcpu() kvm_arch_vcpu_destroy() kvm_arch_vcpu_free() 2) kvm_put_kvm() kvm_destroy_vm() kvm_arch_destroy_vm() kvm_mips_free_vcpus() kvm_arch_vcpu_free() Neither of the paths handles VCPU free. We need to do it in kvm_arch_vcpu_free() corresponding to the memory allocation in kvm_arch_vcpu_create(). Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: stable@vger.kernel.org Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Remove redundant semicolonJames Hogan
Remove extra semicolon in kvm_arch_vcpu_dump_regs(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Remove redundant NULL checks before kfree()James Hogan
The kfree() function already NULL checks the parameter so remove the redundant NULL checks before kfree() calls in arch/mips/kvm/. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Quieten kvm_info() loggingJames Hogan
The logging from MIPS KVM is fairly noisy with kvm_info() in places where it shouldn't be, such as on VM creation and migration to a different CPU. Replace these kvm_info() calls with kvm_debug(). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Remove ifdef DEBUG around kvm_debugJames Hogan
kvm_debug() uses pr_debug() which is already compiled out in the absence of a DEBUG define, so remove the unnecessary ifdef DEBUG lines around kvm_debug() calls which are littered around arch/mips/kvm/. As well as generally cleaning up, this prevents future bit-rot due to DEBUG not being commonly used. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Fix kvm_debug bit-rottageJames Hogan
Fix build errors when DEBUG is defined in arch/mips/kvm/. - The DEBUG code in kvm_mips_handle_tlbmod() was missing some variables. - The DEBUG code in kvm_mips_host_tlb_write() was conditional on an undefined "debug" variable. - The DEBUG code in kvm_mips_host_tlb_inv() accessed asid_map directly rather than using kvm_mips_get_user_asid(). Also fixed brace placement. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Make kvm_mips_comparecount_{func,wakeup} staticJames Hogan
The kvm_mips_comparecount_func() and kvm_mips_comparecount_wakeup() functions are only used within arch/mips/kvm/kvm_mips.c, so make them static. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Add count frequency KVM registerJames Hogan
Expose the KVM guest CP0_Count frequency to userland via a new KVM_REG_MIPS_COUNT_HZ register accessible with the KVM_{GET,SET}_ONE_REG ioctls. When the frequency is altered the bias is adjusted such that the guest CP0_Count doesn't jump discontinuously or lose any timer interrupts. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Add master disable count interfaceJames Hogan
Expose two new virtual registers to userland via the KVM_{GET,SET}_ONE_REG ioctls. KVM_REG_MIPS_COUNT_CTL is for timer configuration fields and just contains a master disable count bit. This can be used by userland to freeze the timer in order to read a consistent state from the timer count value and timer interrupt pending bit. This cannot be done with the CP0_Cause.DC bit because the timer interrupt pending bit (TI) is also in CP0_Cause so it would be impossible to stop the timer without also risking a race with an hrtimer interrupt and having to explicitly check whether an interrupt should have occurred. When the timer is re-enabled it resumes without losing time, i.e. the CP0_Count value jumps to what it would have been had the timer not been disabled, which would also be impossible to do from userland with CP0_Cause.DC. The timer interrupt also cannot be lost, i.e. if a timer interrupt would have occurred had the timer not been disabled it is queued when the timer is re-enabled. This works by storing the nanosecond monotonic time when the master disable is set, and using it for various operations instead of the current monotonic time (e.g. when recalculating the bias when the CP0_Count is set), until the master disable is cleared again, i.e. the timer state is read/written as it would have been at that time. This state is exposed to userland via the read-only KVM_REG_MIPS_COUNT_RESUME virtual register so that userland can determine the exact time the master disable took effect. This should allow userland to atomically save the state of the timer, and later restore it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Rewrite count/compare timer emulationJames Hogan
Previously the emulation of the CPU timer was just enough to get a Linux guest running but some shortcuts were taken: - The guest timer interrupt was hard coded to always happen every 10 ms rather than being timed to when CP0_Count would match CP0_Compare. - The guest's CP0_Count register was based on the host's CP0_Count register. This isn't very portable and fails on cores without a CP_Count register implemented such as Ingenic XBurst. It also meant that the guest's CP0_Cause.DC bit to disable the CP0_Count register took no effect. - The guest's CP0_Count register was emulated by just dividing the host's CP0_Count register by 4. This resulted in continuity problems when used as a clock source, since when the host CP0_Count overflows from 0x7fffffff to 0x80000000, the guest CP0_Count transitions discontinuously from 0x1fffffff to 0xe0000000. Therefore rewrite & fix emulation of the guest timer based on the monotonic kernel time (i.e. ktime_get()). Internally a 32-bit count_bias value is added to the frequency scaled nanosecond monotonic time to get the guest's CP0_Count. The frequency of the timer is initialised to 100MHz and cannot yet be changed, but a later patch will allow the frequency to be configured via the KVM_{GET,SET}_ONE_REG ioctl interface. The timer can now be stopped via the CP0_Cause.DC bit (by the guest or via the KVM_SET_ONE_REG ioctl interface), at which point the current CP0_Count is stored and can be read directly. When it is restarted the bias is recalculated such that the CP0_Count value is continuous. Due to the nature of hrtimer interrupts any read of the guest's CP0_Count register while it is running triggers a check for whether the hrtimer has expired, so that the guest/userland cannot observe the CP0_Count passing CP0_Compare without queuing a timer interrupt. This is also taken advantage of when stopping the timer to ensure that a pending timer interrupt is queued. This replaces the implementation of: - Guest read of CP0_Count - Guest write of CP0_Count - Guest write of CP0_Compare - Guest write of CP0_Cause - Guest read of HWR 2 (CC) with RDHWR - Host read of CP0_Count via KVM_GET_ONE_REG ioctl interface - Host write of CP0_Count via KVM_SET_ONE_REG ioctl interface - Host write of CP0_Compare via KVM_SET_ONE_REG ioctl interface - Host write of CP0_Cause via KVM_SET_ONE_REG ioctl interface Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Migrate hrtimer to follow VCPUJames Hogan
When a VCPU is scheduled in on a different CPU, refresh the hrtimer used for emulating count/compare so that it gets migrated to the same CPU. This should prevent a timer interrupt occurring on a different CPU to where the guest it relates to is running, which would cause the guest timer interrupt not to be delivered until after the next guest exit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Deliver guest interrupts after local_irq_disable()James Hogan
When about to run the guest, deliver guest interrupts after disabling host interrupts. This should prevent an hrtimer interrupt from being handled after delivering guest interrupts, and therefore not delivering the guest timer interrupt until after the next guest exit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Add CP0_HWREna KVM register accessJames Hogan
Implement KVM_{GET,SET}_ONE_REG ioctl based access to the guest CP0 HWREna register. This is so that userland can save and restore its value so that RDHWR instructions don't have to be emulated by the guest. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Add CP0_UserLocal KVM register accessJames Hogan
Implement KVM_{GET,SET}_ONE_REG ioctl based access to the guest CP0 UserLocal register. This is so that userland can save and restore its value. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Add CP0_Count/Compare KVM register accessJames Hogan
Implement KVM_{GET,SET}_ONE_REG ioctl based access to the guest CP0 Count and Compare registers. These registers are special in that writing to them has side effects (adjusting the time until the next timer interrupt) and reading of Count depends on the time. Therefore add a couple of callbacks so that different implementations (trap & emulate or VZ) can implement them differently depending on what the hardware provides. The trap & emulate versions mostly duplicate what happens when a T&E guest reads or writes these registers, so it inherits the same limitations which can be fixed in later patches. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Move KVM_{GET,SET}_ONE_REG definitions into kvm_host.hJames Hogan
Move the KVM_{GET,SET}_ONE_REG MIPS register id definitions out of kvm_mips.c to kvm_host.h so that they can be shared between multiple source files. This allows register access to be indirected depending on the underlying implementation (trap & emulate or VZ). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Add CP0_EPC KVM register accessJames Hogan
Contrary to the comment, the guest CP0_EPC register cannot be set via kvm_regs, since it is distinct from the guest PC. Add the EPC register to the KVM_{GET,SET}_ONE_REG ioctl interface. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Use tlb_write_randomJames Hogan
When MIPS KVM needs to write a TLB entry for the guest it reads the CP0_Random register, uses it to generate the CP_Index, and writes the TLB entry using the TLBWI instruction (tlb_write_indexed()). However there's an instruction for that, TLBWR (tlb_write_random()) so use that instead. This happens to also fix an issue with Ingenic XBurst cores where the same TLB entry is replaced each time preventing forward progress on stores due to alternating between TLB load misses for the instruction fetch and TLB store misses. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Use local_flush_icache_range to fix RI on XBurstJames Hogan
MIPS KVM uses mips32_SyncICache to synchronise the icache with the dcache after dynamically modifying guest instructions or writing guest exception vector. However this uses rdhwr to get the SYNCI step, which causes a reserved instruction exception on Ingenic XBurst cores. It would seem to make more sense to use local_flush_icache_range() instead which does the same thing but is more portable. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-30MIPS: KVM: Allocate at least 16KB for exception handlersJames Hogan
Each MIPS KVM guest has its own copy of the KVM exception vector. This contains the TLB refill exception handler at offset 0x000, the general exception handler at offset 0x180, and interrupt exception handlers at offset 0x200 in case Cause_IV=1. A common handler is copied to offset 0x2000 and offset 0x3000 is used for temporarily storing k1 during entry from guest. However the amount of memory allocated for this purpose is calculated as 0x200 rounded up to the next page boundary, which is insufficient if 4KB pages are in use. This can lead to the common handler at offset 0x2000 being overwritten and infinitely recursive exceptions on the next exit from the guest. Increase the minimum size from 0x200 to 0x4000 to cover the full use of the page. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-29MIPS: KVM: remove the stale memory alias support function unalias_gfnDeng-Cheng Zhu
The memory alias support has been removed since a1f4d39500 (KVM: Remove memory alias support). So remove unalias_gfn from the MIPS port. Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-19MIPS: KVM: Remove dead code in CP0 emulationJames Hogan
The code to check whether rd > MIPS_CP0_DESAVE is dead code, since MIPS_CP0_DESAVE = 31 and rd is already masked with 0x1f. Remove it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-19MIPS: KVM: Consult HWREna before emulating RDHWRJames Hogan
The ability to read hardware registers from userland with the RDHWR instruction should depend upon the corresponding bit of the HWREna register being set, otherwise a reserved instruction exception should be generated. However KVM's current emulation ignores the guest's HWREna and always emulates RDHWR instructions even if the guest OS has disallowed them. Therefore rework the RDHWR emulation code to check for privilege or the corresponding bit in the guest HWREna bit. Also remove the #if 0 case for the UserLocal register. I presume it was there for debug purposes but it seems unnecessary now that the guest can control whether it causes a guest exception. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-19MIPS: KVM: Pass reserved instruction exceptions to guestJames Hogan
Previously a reserved instruction exception while in guest code would cause a KVM internal error if kvm_mips_handle_ri() didn't recognise the instruction (including a RDHWR from an unrecognised hardware register). However the guest OS should really have the opportunity to catch the exception so that it can take the appropriate actions such as sending a SIGILL to the guest user process or emulating the instruction itself. Therefore in these cases emulate a guest RI exception and only return EMULATE_FAIL if that fails, being careful to revert the PC first in case the exception occurred in a branch delay slot in which case the PC will already point to the branch target. Also turn the printk messages relating to these cases into kvm_debug messages so that they aren't usually visible. This allows crashme to run in the guest without killing the entire VM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-24mips: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2014-01-24MIPS: KVM: remove shadow_tlb codeJames Hogan
The kvm_mips_init_shadow_tlb() function is called from kvm_arch_vcpu_init() and initialises entries 0 to current_cpu_data.tlbsize-1 of the virtual cpu's shadow_tlb[64] array. However newer cores with FTLBs can have a tlbsize > 64, for example the ProAptiv I'm testing on has a total tlbsize of 576. This causes kvm_mips_init_shadow_tlb() to overflow the shadow_tlb[64] array and overwrite the comparecount_timer among other things, causing a lock up when starting a KVM guest. Aside from kvm_mips_init_shadow_tlb() which only initialises it, the shadow_tlb[64] array is only actually used by the following functions: - kvm_shadow_tlb_put() & kvm_shadow_tlb_load() These are never called. The only call sites are #if 0'd out. - kvm_mips_dump_shadow_tlbs() This is never called. It was originally added for trap & emulate, but turned out to be unnecessary so it was disabled. So instead of fixing the shadow_tlb initialisation code, lets just remove the shadow_tlb[64] array and the above functions entirely. The only functional change here is the removal of broken shadow_tlb initialisation. The rest just deletes dead code. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Gleb Natapov <gleb@redhat.com> Cc: kvm@vger.kernel.org Cc: Sanjay Lal <sanjayl@kymasys.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6384/
2014-01-24MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHIJames Hogan
When KVM is enabled and TLB invalidation is supported, kvm_mips_flush_host_tlb() can cause a machine check exception due to multiple matching TLB entries. This can occur on shutdown even when KVM hasn't been actively used. Commit adb78de9eae8 (MIPS: mm: Move UNIQUE_ENTRYHI macro to a header file) created a common UNIQUE_ENTRYHI in asm/tlb.h but it didn't update the copy of UNIQUE_ENTRYHI in kvm_tlb.c to use it. Commit 36b175451399 (MIPS: tlb: Set the EHINV bit for TLBINVF cores when invalidating the TLB) later added TLB invalidation (EHINV) support to the common UNIQUE_ENTRYHI. Therefore make kvm_tlb.c use the EHINV aware UNIQUE_ENTRYHI implementation in asm/tlb.h too. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Gleb Natapov <gleb@redhat.com> Cc: kvm@vger.kernel.org Cc: Sanjay Lal <sanjayl@kymasys.com> Reviewed-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6383/
2013-10-17kvm: Add struct kvm arg to memslot APIsAneesh Kumar K.V
We will use that in the later patch to find the kvm ops handler Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-09-04Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Gleb Natapov: "The highlights of the release are nested EPT and pv-ticketlocks support (hypervisor part, guest part, which is most of the code, goes through tip tree). Apart of that there are many fixes for all arches" Fix up semantic conflicts as discussed in the pull request thread.. * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (88 commits) ARM: KVM: Add newlines to panic strings ARM: KVM: Work around older compiler bug ARM: KVM: Simplify tracepoint text ARM: KVM: Fix kvm_set_pte assignment ARM: KVM: vgic: Bump VGIC_NR_IRQS to 256 ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regs ARM: KVM: vgic: fix GICD_ICFGRn access ARM: KVM: vgic: simplify vgic_get_target_reg KVM: MMU: remove unused parameter KVM: PPC: Book3S PR: Rework kvmppc_mmu_book3s_64_xlate() KVM: PPC: Book3S PR: Make instruction fetch fallback work for system calls KVM: PPC: Book3S PR: Don't corrupt guest state when kernel uses VMX KVM: x86: update masterclock when kvmclock_offset is calculated (v2) KVM: PPC: Book3S: Fix compile error in XICS emulation KVM: PPC: Book3S PR: return appropriate error when allocation fails arch: powerpc: kvm: add signed type cast for comparation KVM: x86: add comments where MMIO does not return to the emulator KVM: vmx: count exits to userspace during invalid guest emulation KVM: rename __kvm_io_bus_sort_cmp to kvm_io_bus_cmp kvm: optimize away THP checks in kvm_is_mmio_pfn() ...
2013-08-26mips/kvm: Make kvm_locore.S 64-bit buildable/safe.David Daney
We need to use more of the Macros in asm.h to allow kvm_locore.S to build in a 64-bit kernel. For 32-bit there is no change in the generated object code. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-26mips/kvm: Cleanup .push/.pop directives in kvm_locore.SDavid Daney
There are: .set push .set noreorder .set noat . . . .set pop Sequences all over the place in this file, but in some places the final ".set pop" is erroneously converted to ".set push", so none of these really do what they appear to. Clean up the whole mess by moving ".set noreorder", ".set noat" to the top, and get rid of everything else. Generated object code is unchanged. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-26mips/kvm: Improve code formatting in arch/mips/kvm/kvm_locore.SDavid Daney
No code changes, just reflowing some comments and consistently using tabs and spaces. Object code is verified to be unchanged. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-19MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATIONMarkos Chandras
Virtualization does not always need KVM capabilities so drop the dependency. The KVM symbol already depends on HAVE_KVM. Fixes the following problem on a randconfig: warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) warning: (REMOTEPROC && RPMSG) selects VIRTUALIZATION which has unmet direct dependencies (HAVE_KVM) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5443/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-18KVM: Introduce kvm_arch_memslots_updated()Takuya Yoshikawa
This is called right after the memslots is updated, i.e. when the result of update_memslots() gets installed in install_new_memslots(). Since the memslots needs to be updated twice when we delete or move a memslot, kvm_arch_commit_memory_region() does not correspond to this exactly. In the following patch, x86 will use this new API to check if the mmio generation has reached its maximum value, in which case mmio sptes need to be flushed out. Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-11mips/kvm: Use KVM_REG_MIPS and proper size indicators for *_ONE_REGDavid Daney
The API requires that the GET_ONE_REG and SET_ONE_REG ioctls have this extra information encoded in the register identifiers. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-06-03mips/kvm: Use ENOIOCTLCMD to indicate unimplemented ioctls.David Daney
The Linux Way is to return -ENOIOCTLCMD to the vfs when an unimplemented ioctl is requested. Do this in kvm_mips instead of a random mixture of -ENOTSUPP and -EINVAL. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03mips/kvm: Fix ABI by moving manipulation of CP0 registers to KVM_{G,S}ET_ONE_REGDavid Daney
Because not all 256 CP0 registers are ever implemented, we need a different method of manipulating them. Use the KVM_SET_ONE_REG/KVM_GET_ONE_REG mechanism. Now unused code and definitions are removed. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>