summaryrefslogtreecommitdiffstats
path: root/arch/mips/loongson
AgeCommit message (Collapse)Author
2014-12-11Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
2014-11-24MIPS: loongson: common: rtc: make loongson_rtc_resources staticAaro Koskinen
Make loongson_rtc_resources static to eliminate the following sparse warning: warning: symbol 'loongson_rtc_resources' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8529/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: loongson: common: init: Add a missing includeAaro Koskinen
Add a missing include to eliminate the following sparse warnings: warning: symbol 'prom_init' was not declared. Should it be static? warning: symbol 'prom_free_prom_memory' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8531/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: loongson: lemote-2f: reset: make ml2f_reboot staticAaro Koskinen
Make ml2f_reboot static to elimite the following sparse warning: warning: symbol 'ml2f_reboot' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8528/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: loongson: lemote-2f: irq: Make internal data staticAaro Koskinen
Make internal static to eliminate the following sparse warnings: warning: symbol 'ip6_irqaction' was not declared. Should it be static? warning: symbol 'cascade_irqaction' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8527/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: loongson: common: Setup: add a missing includeAaro Koskinen
Add a missing include to get rid of the following sparse warning: warning: symbol 'plat_mem_setup' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8530/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: cs5536_pci: Add a missing includeAaro Koskinen
Add a missing include to get rid of the following sparse warnings: warning: symbol 'cs5536_pci_conf_write4' was not declared. Should it be static? warning: symbol 'cs5536_pci_conf_read4' was not declared. Should it be static? Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8526/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: common: Fix array initializer syntax.Aaro Koskinen
Fix array initializer syntax to get rid of the following sparse warnings: "obsolete array initializer, use C99 syntax". Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8525/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add RS780/SBX00 HPET supportHuacai Chen
CPUFreq driver need external timer, so add hpet at first. In Loongson 3, only Core-0 can receive external interrupt. As a result, timekeeping cannot absolutely use HPET timer. We use a hybrid solution: Core-0 use HPET as its clock event device, but other cores still use MIPS; clock source is global and doesn't need interrupt, so use HPET. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8329/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Improve LEFI firmware interfaceHuacai Chen
Machtypes of Loongson-3 machines become more and more, but there are only small differences among different machtypes. Keeping a large table of machtypes is very ugly and hard to extend. We found that the major machtype differences are UARTs information (number of UARTs, UART IRQs, UART clocks, etc.), platform devices (EC, temperature sensors, fan controllers, etc.) and some workarounds (because of some CPU bugs or mainboard bugs). In this patch we improve the UEFI-like (LEFI) interface to make all Loongson-3 machines use a same machtype "generic-loongson-machine". Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8324/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Allow booting from any coreHuacai Chen
By offering Logical->Physical core id mapping, so as to reserve some physical cores via mask. This allow booting from any core when core-0 has problems. Since the maximun cores supported by Loongson-3 is 16, 32-bit cpu_startup_core_id can be split to 16-bit cpu_startup_core_id and 16-bit reserved_cores_mask for compatibility. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson-3: Add PHYS48_TO_HT40 supportHuacai Chen
The width of HT-bus is only 40-bit, but Loongson-3 has 48-bit physical address. This implies only node-0's memory is DMAable because high bits (Node ID) will lost. Fortunately, by configuring address windows in firmware, we can extract 2bit Node ID (bit 44~47, only bit 44~45 used now) from Loongson-3's 48-bit address space and embed it into 40-bit (bit 37~38). Every NUMA node can do DMA now (however, maximum memory of each node is reduced to 2^37 = 128GB). Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/8321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Remove useless parenthesesRalf Baechle
Based on the spatch @@ expression e; @@ - return (e); + return e; with heavy hand editing because some of the changes are either whitespace or identation only or result in excessivly long lines. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24MIPS: Loongson: Make platform serial setup always built-in.Aaro Koskinen
If SERIAL_8250 is compiled as a module, the platform specific setup for Loongson will be a module too, and it will not work very well. At least on Loongson 3 it will trigger a build failure, since loongson_sysconf is not exported to modules. Fix by making the platform specific serial code always built-in. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reported-by: Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Huacai Chen <chenhc@lemote.com> Cc: Markos Chandras <Markos.Chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/8533/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19MIPS: Loongson3: Fix __node_distances undefined errorJames Cowgill
export the __node_distances symbol in the loongson3 numa code to fix the build error: Building modules, stage 2. MODPOST 221 modules ERROR: "__node_distances" [drivers/block/nvme.ko] undefined! scripts/Makefile.modpost:90: recipe for target '__modpost' failed when building the kernel with: CONFIG_CPU_LOONGSON3=y CONFIG_NUMA=y CONFIG_BLK_DEV_NVME=m Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Patchwork: https://patchwork.linux-mips.org/patch/8444/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-22MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismergeAaro Koskinen
During 3.16 merge window, parts of the commit 8e8acb32960f (MIPS/loongson2_cpufreq: Fix CPU clock rate setting) seem to have been deleted probably due to a mismerge, and as a result cpufreq is broken again on Loongson2 boards in 3.16 and newer kernels. Fix by repeating the fix. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org # 3.16 Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-08-26mips: Replace __get_cpu_var usesChristoph Lameter
__get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-19MIPS: Loongson: Fix COP2 usage for preemptible kernelHuacai Chen
In preemptible kernel, only TIF_USEDFPU flag is reliable to distinguish whether _init_fpu()/_restore_fp() is needed. Because the value of the CP0_Status.CU1 isn't changed during preemption. V2: Fix coding style. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7515/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-08-19MIPS: Remove duplicated include from numa.cWei Yongjun
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Huacai Chen <chenhc@lemote.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7537/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Loongson: Rename CONFIG_LEMOTE_MACH3A to CONFIG_LOONGSON_MACH3XHuacai Chen
Since this CONFIG option will be used for both Loongson-3A/3B machines, and not all Loongson-3 machines are produced by Lemote, we rename CONFIG_LEMOTE_MACH3A to CONFIG_LOONGSON_MACH3X. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7190/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Loongson-3: Enable the COP2 usageHuacai Chen
Loongson-3 has some specific instructions (MMI/SIMD) in coprocessor 2. COP2 isn't independent because it share COP1 (FPU)'s registers. This patch enable the COP2 usage so user-space programs can use the MMI/SIMD instructions. When COP2 exception happens, we enable both COP1 (FPU) and COP2, only in this way the fp context can be saved and restored correctly. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Add Loongson-3B supportHuacai Chen
Loongson-3B is a 8-cores processor. In general it looks like there are two Loongson-3A integrated in one chip: 8 cores are separated into two groups (two NUMA node), each node has its own local memory. Of course there are some differences between one Loongson-3B and two Loongson-3A. E.g., the base addresses of IPI registers of each node are not the same; Loongson-3A use ChipConfig register to enable/disable clock, but Loongson-3B use FreqControl register instead. There are two revision of Loongson-3B, the first revision is called as Loongson-3B1000, whose frequency is 1GHz and has a PRid 0x6306, the second revision is called as Loongson-3B1500, whose frequency is 1.5GHz and has a PRid 0x6307. Both revisions has a bug that clock cannot be disabled at runtime, but this will be fixed in future. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7188/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Add NUMA support for Loongson-3Huacai Chen
Multiple Loongson-3A chips can be interconnected with HT0-bus. This is a CC-NUMA system that every chip (node) has its own local memory and cache coherency is maintained by hardware. The 64-bit physical memory address format is as follows: 0x-0000-YZZZ-ZZZZ-ZZZZ The high 16 bits should be 0, which means the real physical address supported by Loongson-3 is 48-bit. The "Y" bits is the base address of each node, which can be also considered as the node-id. The "Z" bits is the address offset within a node, which means every node has a 44 bits address space. Macros XPHYSADDR and MAX_PHYSMEM_BITS are modified unconditionally, because many other MIPS CPUs have also extended their address spaces. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30MIPS: Loongson: Modify ChipConfig register definitionHuacai Chen
This patch is prepared for Multi-chip interconnection. Since each chip has a ChipConfig register, LOONGSON_CHIPCFG should be an array. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7185/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...
2014-06-04Merge branch '3.15-fixes' into mips-for-linux-nextRalf Baechle
2014-06-03Merge back earlier cpufreq material.Rafael J. Wysocki
Conflicts: arch/mips/loongson/lemote-2f/clock.c drivers/cpufreq/intel_pstate.c
2014-05-28MIPS: Lemote 2F: cs5536: mfgpt: depend on !highresSebastian Andrzej Siewior
This timer does not support oneshot mode and as such the system remains in periodic mode and won't support high res timers. This patch adds a note about this in Kconfig and lets it depend on !highres so users which want to use high timers don' stuck with this timer. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Hua Yan <yanh@lemote.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Hongliang Tao <taohl@lemote.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6935/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-28MIPS: Lemote 2F: cs5536: mfgpt: use raw locksSebastian Andrzej Siewior
The lock is taken in the raw irq path and therefore a rawlock should be used instead of a normal spinlock. While here I drop the export symbol on that variable since there are no other users. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Hua Yan <yanh@lemote.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Hongliang Tao <taohl@lemote.com> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6936/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-27MIPS: SMP: Remove plat_smp_ops cpus_done method.Ralf Baechle
Nothing was using the method and there isn't any need for this hook. This leaves smp_cpus_done() empty for the moment. As suggested by Paul Bolle <pebolle@tiscali.nl>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-13MIPS/loongson2_cpufreq: Fix CPU clock rate settingAaro Koskinen
Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has been unnoticed, as loongson2_cpufreq was the only place where the rate was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656 (cpufreq: introduce cpufreq_generic_get() routine) things however broke, and now loops_per_jiffy adjustments are incorrect (1000 times too long). The patch fixes this by changing cpu_clk rate to Hz. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: cpufreq@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Patchwork: https://patchwork.linux-mips.org/patch/6678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-05-13MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQPaul Bolle
Commit 0e476d91244e ("MIPS: Loongson: Add Loongson-3 Kconfig options") added "select GENERIC_HARDIRQS_NO__DO_IRQ". But the Kconfig symbol GENERIC_HARDIRQS_NO__DO_IRQ was already removed in v2.6.38, so that select is a nop. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6677/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-04-30mips: lemote 2f: Use cpufreq_for_each_entry macro for iterationStratos Karafotis
The cpufreq core now supports the cpufreq_for_each_entry macro helper for iteration over the cpufreq_frequency_table, so use it. It should have no functional changes. Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-07cpufreq: create another field .flags in cpufreq_frequency_tableViresh Kumar
Currently cpufreq frequency table has two fields: frequency and driver_data. driver_data is only for drivers' internal use and cpufreq core shouldn't use it at all. But with the introduction of BOOST frequencies, this assumption was broken and we started using it as a flag instead. There are two problems due to this: - It is against the description of this field, as driver's data is used by the core now. - if drivers fill it with -3 for any frequency, then those frequencies are never considered by cpufreq core as it is exactly same as value of CPUFREQ_BOOST_FREQ, i.e. ~2. The best way to get this fixed is by creating another field flags which will be used for such flags. This patch does that. Along with that various drivers need modifications due to the change of struct cpufreq_frequency_table. Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-31MIPS: Loongson 3: Add CPU hotplug supportHuacai Chen
Tips of Loongson's CPU hotplug: 1, To fully shutdown a core in Loongson 3, the target core should go to CKSEG1 and flush all L1 cache entries at first. Then, another core (usually Core 0) can safely disable the clock of the target core. So play_dead() call loongson3_play_dead() via CKSEG1 (both uncached and unmmaped). 2, The default clocksource of Loongson is MIPS. Since clock source is a global device, timekeeping need the CP0' Count registers of each core be synchronous. Thus, when a core is up, we use a SMP_ASK_C0COUNT IPI to ask Core-0's Count. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6639 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add Loongson-3 SMP supportHuacai Chen
IPI registers of Loongson-3 include IPI_SET, IPI_CLEAR, IPI_STATUS, IPI_EN and IPI_MAILBOX_BUF. Each bit of IPI_STATUS indicate a type of IPI and IPI_EN indicate whether the IPI is enabled. The sender write 1 to IPI_SET bits generate IPIs in IPI_STATUS, and receiver write 1 to bits of IPI_CLEAR to clear IPIs. IPI_MAILBOX_BUF are used to deliver more information about IPIs. Why we change code in arch/mips/loongson/common/setup.c? If without this change, when SMP configured, system cannot boot since it hang at printk() in cgroup_init_early(). The root cause is: console_trylock() \-->down_trylock(&console_sem) \-->raw_spin_unlock_irqrestore(&sem->lock, flags) \-->_raw_spin_unlock_irqrestore()(SMP/UP have different versions) \-->__raw_spin_unlock_irqrestore() (following is the SMP case) \-->do_raw_spin_unlock() \-->arch_spin_unlock() \-->nudge_writes() \-->mb() \-->wbflush() \-->__wbflush() In previous code __wbflush() is initialized in plat_mem_setup(), but cgroup_init_early() is called before plat_mem_setup(). Therefore, In this patch we make changes to avoid boot failure. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6638 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson: Add Loongson-3 Kconfig optionsHuacai Chen
Added Kconfig options include: Loongson-3 CPU and machine definition, CPU cache features, UEFI-like firmware interface (LEFI), HT-linked PCI, and swiotlb support. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6637 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson: Add swiotlb to support All-Memory DMAHuacai Chen
Loongson doesn't support DMA address above 4GB traditionally. If memory is more than 4GB, CONFIG_SWIOTLB and ZONE_DMA32 should be selected. In this way, DMA pages are allocated below 4GB preferably. However, if low memory is not enough, high pages are allocated and swiotlb is used for bouncing. Moreover, we provide a platform-specific dma_map_ops::set_dma_mask() to set a device's dma_mask and coherent_dma_mask. We use these masks to distinguishes an allocated page can be used for DMA directly, or need swiotlb to bounce. Recently, we found that 32-bit DMA isn't a hardware bug, but a hardware configuration issue. So, latest firmware has enable the DMA support as high as 40-bit. To support all-memory DMA for all devices (besides the Loongson platform limit, there are still some devices have their own DMA32 limit), and also to be compatible with old firmware, we keep use swiotlb. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6636 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add serial port supportHuacai Chen
Loongson family machines has three types of serial port: PCI UART, LPC UART and CPU internal UART. Loongson-2E and parts of Loongson-2F based machines use PCI UART; most Loongson-2F based machines use LPC UART; Loongson-2G/3A has both LPC and CPU UART but usually use CPU UART. Port address of UARTs: CPU UART: REG_BASE + OFFSET; LPC UART: LIO1_BASE + OFFSET; PCI UART: PCIIO_BASE + OFFSET. Since LPC UART are linked in "Local Bus", both CPU UART and LPC UART are called "CPU provided serial port". Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6635 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add IRQ init and dispatch supportHuacai Chen
IRQ routing path of Loongson-3: Devices(most) --> I8259 --> HT Controller --> IRQ Routing Table --> CPU ^ | Device(legacy devices such as UART) --> Bonito ---| IRQ Routing Table route 32 INTs to CPU's INT0~INT3(IP2~IP5 of CP0), 32 INTs include 16 HT INTs(mostly), 4 PCI INTs, 1 LPC INT, etc. IP6 is used for IPI and IP7 is used for internal MIPS timer. LOONGSON_INT_ROUTER_* are IRQ Routing Table registers. I8259 IRQs are 1:1 mapped to HT1 INTs. LOONGSON_HT1_* are configuration registers of HT1 controller. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6634 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson: Add UEFI-like firmware interface (LEFI) supportHuacai Chen
The new UEFI-like firmware interface (LEFI, i.e. Loongson Unified Firmware Interface) has 3 advantages: 1, Firmware export a physical memory map which is similar to X86's E820 map, so prom_init_memory() will be more elegant that #ifdef clauses can be removed. 2, Firmware export a pci irq routing table, we no longer need pci irq routing fixup in kernel's code. 3, Firmware has a built-in vga bios, and its address is exported, the linux kernel no longer need an embedded blob. With the LEFI interface, Loongson-3A/2G and all their successors can use a unified kernel. All Loongson-based machines support this new interface except 2E/2F series. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6632 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add Lemote-3A machtypes definitionHuacai Chen
Add four Loongson-3 based machine types: MACH_LEMOTE_A1004/MACH_LEMOTE_A1201 are laptops; MACH_LEMOTE_A1101 is mini-itx; MACH_LEMOTE_A1205 is all-in-one machine. The most significant differrent between A1004/A1201 and A1101/A1205 is the laptops have EC but others don't. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6631 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-24mips: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2013-09-03MIPS: Loongson: Hide the pci code behind CONFIG_PCIMarkos Chandras
The pci.c code depends on symbols which are only visible if CONFIG_PCI is selected. Also fixes the following problem on loongson allnoconfig: arch/mips/built-in.o: In function `pcibios_init': pci.c:(.init.text+0x528): undefined reference to `register_pci_controller' arch/mips/built-in.o:(.data+0xc): undefined reference to `loongson_pci_ops' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5584/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
2013-06-21MIPS: Loongson: Fix random early boot hangAaro Koskinen
Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge device (CS5536 general purpose timer) for the timer interrupt. It starts running early and is already enabled during the PCI configuration, during which there is a small window in pci_read_base() when the register access is temporarily disabled. If the timer interrupts at this point, the system will hang. Fix this by adding a fixup that keeps the register access always enabled. The hang the patch fixes usually looks like this: [ 0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100 [ 0.848000] pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417] [ 0.852000] pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff] [ 0.856000] pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf] [ 28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1] [ 28.140000] Modules linked in: [ 28.140000] irq event stamp: 37965 [ 28.140000] hardirqs last enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c [ 28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c [ 28.140000] softirqs last enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258 [ 28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0 [ 28.140000] Cpu 0 [ 28.140000] $ 0 : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001 [ 28.140000] $ 4 : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011 [ 28.140000] $ 8 : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011 [ 28.140000] $12 : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000 [ 28.140000] $16 : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000 [ 28.140000] $20 : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000 [ 28.140000] $24 : 0000000000000d80 00000000fffedbe0 [ 28.140000] $28 : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8 [ 28.140000] Hi : 0000000000d0fc00 [ 28.140000] Lo : 0000000000f82b40 [ 28.140000] epc : ffffffff8023810c __do_softirq+0xe4/0x258 [ 28.140000] Not tainted [ 28.140000] ra : ffffffff802380f8 __do_softirq+0xd0/0x258 [ 28.140000] Status: 140044e3 KX SX UX KERNEL EXL IE [ 28.140000] Cause : 10008400 [ 28.140000] PrId : 00006303 (ICT Loongson-2) Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4958/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-04cpufreq: rename index as driver_data in cpufreq_frequency_tableViresh Kumar
The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-22MIPS: Idle: Consolidate all declarations in <asm/idle.h>.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-03-20mips: loongson: use GPIO driver on CONFIG_GPIOLIBAlexandre Courbot
The GPIO driver uses gpiolib, thus it should be compiled when CONFIG_GPIOLIB is defined and not only CONFIG_GENERIC_GPIO. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>