summaryrefslogtreecommitdiffstats
path: root/arch/mips/oprofile
AgeCommit message (Collapse)Author
2007-10-11[MIPS] Fix "no space between function name and open parenthesis" warnings.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-11[MIPS] Allow hardwiring of the CPU type to a single type for optimization.Ralf Baechle
This saves a few k on systems which only ever ship with a single CPU type. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-31[MIPS] Oprofile: Fix rm9000 performance counter handlerDajie Tan
The new type of irq handler remove a parameter (struct pt_regs *),but someone forgot to supply it. Signed-off-by: Dajie Tan <jiankemeng@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-14[MIPS] Separate performance counter interruptsChris Dearman
Support for performance counter overflow interrupt that is on a separate interrupt from the timer. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-04-24[MIPS] Fix oprofile logic to physical counter remappingRalf Baechle
This did cause oprofile to fail on non-multithreaded systems with more than 2 processors such as the BCM1480. Reported by Manish Lachwani (mlachwani@mvista.com). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-13[MIPS] Oprofile: Reset all performance registers for MIPS_MT_SMP configsChris Dearman
Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-04[MIPS] Oprofile: Add missing break statements.Ralf Baechle
This was causing oprofile to fail on R10000, R12000, R14000. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-20[MIPS] Fix Kconfig typo bugRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06[MIPS] Do not allow oprofile to be enabled on SMTC.Ralf Baechle
Oprofile cannot work on SMTC due to the limited number of counters. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30[MIPS] Oprofile: kernel support for the R10000.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30[MIPS] Oprofile: Fix MIPSxx counter number detection.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-30[MIPS] Oprofile: fix on non-VSMP / non-SMTC SMP configurations.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-19[MIPS] A few more pt_regs fixups.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-19[MIPS] Delete unneeded pt_regs forward declaration.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08[MIPS] Complete fixes after removal of pt_regs argument to int handlers.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13[MIPS] Oprofile: Fix build failure due to warning and -Werror.Thiemo Seufer
Signed-off-by: Thiemo Seufer <ths@networkno.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-29[MIPS] Oprofile: Support VSMP on 34K.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-26[PATCH] oprofile: Fix unnecessary clevernessMarkus Armbruster
nmi_create_files() in arch/i386/oprofile/nmi_int.c depends on model->num_counters (number of performance counters) being less than 10. While this is currently the case, it's too clever by half. Other archs aren't quite as clever: they assume 100. I suggest to normalize them all to 1000. Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-06[MIPS] Fix modpost warning: Rename op_model_xxx to op_model_xxx_ops.Atsushi Nemoto
The modpost uses a whitelist for commonly used suffix on checking the section mismatch. Adding "_ops" suffix to op_modex_xxx get rid of this modpost warning. WARNING: arch/mips/oprofile/oprofile.o - Section mismatch: reference to .init.text: from .data after 'op_model_mipsxx' (at offset 0x528) Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-01[MIPS] Fix detection and handling of the 74K processor.Chris Dearman
Nothing exciting; Linux just didn't know it yet so this is most adding a value to a case statement. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-27[MIPS] Oprofile: fix sparse warning.Ralf Baechle
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-27[MIPS] Fix oprofile module unloadingRalf Baechle
When unloading oprofile module with timer-mode, oprofile_arch_exit dereferences a NULL pointer. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] Oprofile: Support for 34K UP kernels.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07[MIPS] SB1: Add oprofile support.Mark Mason
Signed-off-by: Mark Mason <mason@broadcom.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-10MIPS: Oprofile: Add 5K, 20K and 25K support.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-01-10MIPS: Oprofile: Print error message if the CPU happen to have no counters.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@ongar.mips.com>
2006-01-10MIPS: Oprofile: Fixup the loose ends in the plumbing.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Fixup a few lose ends in explicit support for MIPS R1/R2.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Rename CONFIG_CPU_MIPS{32,64} to CONFIG_CPU_MIPS{32|64}_R1.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29rm9000_init() really is __init code.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29More oprofile bits for MIPS32-style performance counters. The code toRalf Baechle
bolt this into the actual hardware interrupt is yet missing from this commit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> FEXPORT(ret_from_fork)
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!