| Age | Commit message (Collapse) | Author |
|---|
|
Remove the bogus selects on USB-related symbols for 6345 and 6338, not
only we do not yet support USB on BCM63XX, but they also cause the
following warnings:
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
make[4]: Leaving directory `/home/florian/dev/linux'
Just get rid of these bogus Kconfig selects because neither 6345 nor
6338 actually have built-in USB host controllers.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: http://patchwork.linux-mips.org/patch/5497/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Writing a value to a WatchLo* register creates an execution hazard, so
if its value is then read before that hazard is cleared then said value
may be invalid. The mips_probe_watch_registers function must therefore
clear the execution hazard between setting the match bits in a WatchLo*
register & reading the register back in order to check which are set.
This fixes intermittent incorrect watchpoint register probing on some
MIPS cores such as interAptiv & proAptiv.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/5474/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
PowerTV does not provide a prom_putchar function needed for early
printk so remove this symbol for this platform.
Fixes the following problem when EARLY_PRINTK is enabled for powertv:
arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar'
arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X
or CONFIG_SIBYTE_SB1250 is selected according to the
arch/mips/sibyte/Makefile.
This fixes the following build problem:
arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5482/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
CC arch/mips/sibyte/bcm1480/bus_watcher.o
CHK kernel/config_data.h
arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’:
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function)
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1
make[2]: *** [arch/mips/sibyte/bcm1480] Error 2
make[1]: *** [arch/mips/sibyte] Error 2
make: *** [arch/mips] Error 2
The register moved around though it's otherwise the same but because of
the changed address it now also has a different name.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5514/
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
|
|
CC arch/mips/mm/cerr-sb1.o
arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’:
arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function)
arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1
This happens because 8deab1144b553548fb2f1b51affdd36dcd652aaa [[MIPS]
Updated Sibyte headers] changed the headers but not all the users.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5511/
|
|
The write() prototype expects a const char * as argument so declare
it as such.
Fixes the following build problem:
arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of
'cfe_write' discards 'const' qualifier from pointer target type [-Werror]
arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of
'cfe_write' makes pointer from integer without a cast [-Werror]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
It's needed for the TASK_INTERRUPTIBLE definition.
Fixes the following build problem:
arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE'
undeclared (first use in this function)
[ralf@linux-mips.org: Ideally sched.h should be included into the actual
user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky
that close to a release.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5479/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fixes the following build problem:
arch/mips/sibyte/sb1250/bus_watcher.c: In function 'sibyte_bw_int':
arch/mips/sibyte/sb1250/bus_watcher.c:179:7: error: unused variable 'bw_buf'
[-Werror=unused-variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5481/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
ap136_pci_init expects a u8 pointer as an argument.
Fixes the following build problem on a randconfig:
arch/mips/ath79/mach-ap136.c:151:2: error:
too many arguments to function 'ap136_pci_init'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5476/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
OCTEON II cannot execute code in the default CAC_BASE space, so we
supply a value (0x8000000000000000) that does work.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5457/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove the software reset register and reset value definitions
from the 'include/asm/mips-boards/generic.h' header file. Also
clean up header and whitespace in platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Remove usage of 'include/asm/mips-boards/generic.h' header file.
Instead, move the defines for SOFTRES_REG and GORESET local to
the platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5455/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The soft reset register address and reset value to be written are
incorrect for the SEAD-3 platform. This patch fixes them such that
the SEAD-3 can actually perform a soft reset instead of causing an
exception. Also remove usage of 'include/asm/mips-boards/generic.h'
header file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5454/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge
device (CS5536 general purpose timer) for the timer interrupt. It starts
running early and is already enabled during the PCI configuration,
during which there is a small window in pci_read_base() when the register
access is temporarily disabled. If the timer interrupts at this point,
the system will hang. Fix this by adding a fixup that keeps the register
access always enabled.
The hang the patch fixes usually looks like this:
[ 0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100
[ 0.848000] pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417]
[ 0.852000] pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff]
[ 0.856000] pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf]
[ 28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1]
[ 28.140000] Modules linked in:
[ 28.140000] irq event stamp: 37965
[ 28.140000] hardirqs last enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c
[ 28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c
[ 28.140000] softirqs last enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258
[ 28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0
[ 28.140000] Cpu 0
[ 28.140000] $ 0 : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001
[ 28.140000] $ 4 : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011
[ 28.140000] $ 8 : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011
[ 28.140000] $12 : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000
[ 28.140000] $16 : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000
[ 28.140000] $20 : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000
[ 28.140000] $24 : 0000000000000d80 00000000fffedbe0
[ 28.140000] $28 : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8
[ 28.140000] Hi : 0000000000d0fc00
[ 28.140000] Lo : 0000000000f82b40
[ 28.140000] epc : ffffffff8023810c __do_softirq+0xe4/0x258
[ 28.140000] Not tainted
[ 28.140000] ra : ffffffff802380f8 __do_softirq+0xd0/0x258
[ 28.140000] Status: 140044e3 KX SX UX KERNEL EXL IE
[ 28.140000] Cause : 10008400
[ 28.140000] PrId : 00006303 (ICT Loongson-2)
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4958/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Commit abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself. The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel. Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.
The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Then <asm-generic/topology.h> will define cpp macro as default definition
for pcibus_to_node resulting in:
CC arch/mips/pci/pci-ip27.o
arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’
arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token
make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
LD init/built-in.o
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x67c): undefined reference to `bridge_probe'
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x7d8): undefined reference to `bridge_probe'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
LD init/built-in.o
arch/mips/built-in.o: In function `startup_bridge_irq':
ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge'
arch/mips/built-in.o: In function `shutdown_bridge_irq':
ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Some of the TLB bit definitions in <asm/pgtable-bits.h> have become rather
complex and are no longer usable from assembler resulting in an
explosion like this:
AS arch/mips/kernel/head.o
arch/mips/kernel/head.S: Assembler messages:
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: missing ')'
arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(1<<((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)'
make[2]: *** [arch/mips/kernel/head.o] Error 1
Since now MAPPED_KERNEL_SETUP_TLB is in platform-specific code it's safe
to hardcode the TLB bits there.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
It's IP27-specific and can only cause trouble in head.S.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Conflicts:
drivers/net/wireless/ath/ath9k/Kconfig
drivers/net/xen-netback/netback.c
net/batman-adv/bat_iv_ogm.c
net/wireless/nl80211.c
The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.
The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().
Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.
The nl80211 conflict is a little more involved. In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported. Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.
However, the dump handlers to not use this logic. Instead they have
to explicitly do the locking. There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so. So I fixed that whilst handling the overlapping changes.
To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time
back and the comments/Documentation never got updated.
I figured it out when I was going through sched-domains.txt and so thought of
fixing it globally.
I haven't crossed check if the stuff that is referenced in sched/core.c by all
these files is still present and hasn't changed as that wasn't the motive behind
this patch.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/cdff76a265326ab8d71922a1db5be599f20aad45.1370329560.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
CC init/do_mounts.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/linux/skbuff.h:33,
from include/linux/icmpv6.h:4,
from include/linux/ipv6.h:59,
from include/net/ipv6.h:16,
from include/linux/sunrpc/clnt.h:26,
from include/linux/nfs_fs.h:30,
from init/do_mounts.c:30:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
LD init/mounts.o
CC init/init_task.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/linux/skbuff.h:33,
from include/linux/netfilter.h:5,
from include/net/netns/netfilter.h:5,
from include/net/net_namespace.h:20,
from include/linux/init_task.h:14,
from init/init_task.c:1:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
LD init/built-in.o
CC arch/mips/cavium-octeon/setup.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/asm-generic/pci-dma-compat.h:7,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/pci.h:129,
from include/linux/pci.h:1451,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/octeon/pci-octeon.h:12,
from arch/mips/cavium-octeon/setup.c:41:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: error: no return statement in function returning non-void [-Werror=return-type]
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/cavium-octeon/setup.o] Error 1
make[1]: *** [arch/mips/cavium-octeon] Error 2
make: *** [arch/mips] Error 2
[ralf@linux-mips.org: while at it, also include <linux/bug.h> directly.]
Signed-off-by: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5519/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION,
CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and
CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined:
arch/mips/cavium-octeon/setup.c: In function ‘prom_init’:
arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We want these fixes here too.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
adds a socket option for low latency polling.
This allows overriding the global sysctl value with a per-socket one.
Unexport sysctl_net_ll_poll since for now it's not needed in modules.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This typedef is unnecessary and should just be removed.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5460/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The PMC MSP71XX gpio drivers were added in v2.6.28, see commit
9fa32c6b02 ("MIPS: PMC MSP71XX gpio drivers"). They are only built if
CONFIG_HAVE_GPIO_LIB is set.
But the Kconfig symbol HAVE_GPIO_LIB was already removed in v2.6.27, see
commit 7444a72eff ("gpiolib: allow user-selection"). So these drivers
were never buildable. Perhaps no-one noticed because there are no in
tree users of msp71xx_init_gpio() and msp71xx_init_gpio_extended().
Anyhow, these drivers can safely be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
promcon.o is built if CONFIG_PROM_CONSOLE is set. But there's no Kconfig
symbol PROM_CONSOLE, so promcon.c is unbuildable. Remove it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5344/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We want the changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for the Broadcom BCM6345 SoC Ethernet. BCM6345
has a slightly different and older DMA engine which requires the
following modifications:
- the width of the DMA channels on BCM6345 is 64 bytes vs 16 bytes,
which means that the helpers enet_dma{c,s} need to account for this
channel width and we can no longer use macros
- BCM6345 DMA engine does not have any internal SRAM for transfering
buffers
- BCM6345 buffer allocation and flow control is not per-channel but
global (done in RSET_ENETDMA)
- the DMA engine bits are right-shifted by 3 compared to other DMA
generations
- the DMA enable/interrupt masks are a little different (we need to
enabled more bits for 6345)
- some register have the same meaning but are offsetted in the ENET_DMAC
space so a lookup table is required to return the proper offset
The MAC itself is identical and requires no modifications to work.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The invalid value for scratch register is -1, so update the checks of
the form (scratch_reg > 0) to be (scratch_reg >= 0). This will fix
the case in Netlogic XLP where the scratch_reg can be 0.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5444/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
XLR/XLP COP0 scratch is register 22, sel 0-7. Add a function
c0_kscratch() which returns the scratch register for the platform,
and use the return value while generating TLB handlers.
Setup kscratch_mask to 0xf for XLR/XLP since the config4 register
does not exist. This allows the kernel to allocate scratch registers
0-3 if needed.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5445/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix an issue in plat_irq_dispatch due to which it can call do_IRQ
with a PIC irq that is not mapped.
When a per-cpu interrupt and a PIC interrupt are both active, the
check 'eirr & PERCPU_IRQ_MASK' will be true, but the interrupt in 'i'
will be the number of the PIC interrupt. In this case, we will call
do_IRQ on the PIC interrupt without mapping it with nlm_irq_to_xirq().
Fix this by using __ffs64 instead of __ilog2_u64 and using the
interrupt number instead of mask to identify per-cpu interrupts.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5432/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The XLPs in production do not need these workarounds. Remove the code and
the associated ifdef.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5430/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix a cache error found in stress test, caused by the prefetch instruction
going beyond valid memory when acessing the last page of a region. Add
the pref_backup logic similar to XLR in XLP too.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5431/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Earlier we just waited for the first thread of the CPU to come online
before proceeding to wake up others. Update it to wait for all the CPUs
in the core. This will be useful when the boot-up is slow, like while
debugging or when running in a simulator.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5429/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This does not cause a problem yet, but we do not want to write 1
to reserved bits.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5424/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Fix an issue in the reset code. Since this code is copied to the
reset vector, using 'j' for looping is not correct. Use relative
branch 'b'.
Update the usage of 'j' in smpboot.S to be consistent although it
is not a bug there.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5427/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Move the nlm_cpu_ready[] array used by the cpu wakeup code to the
boot area, along with rest of the boot parameter code.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5425/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This moves the calculation and casting needed to access the CPU initialization
data to a function nlm_get_boot_data()
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5426/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The core initialization and reset vector setup needs to be done
even when booting uniprocessor. Move this code from smp.c to setup.c
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5428/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The reset and core initialization code should be available for
uniprocessor as well. This changes is just to take out the code
into a different file, without any change to the logic.
The change for uniprocessor initialization code is in a later patch.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5423/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Create new flle arch/mips/netlogic/xlp/dt.c and move the device
tree related code there.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5422/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
