summaryrefslogtreecommitdiffstats
path: root/arch/mips
AgeCommit message (Collapse)Author
2013-05-09MIPS: microMIPS: Disable LL/SC and fix linker bug.Steven J. Hill
Partially revert commit e0c14a260d66ba35935600d6435940a566fe806b and turn off LL/SC when building a pure microMIPS kernel. This is a temporary fix until the cmpxchg assembly macro functions are re-written to not use the HI/LO registers in address calculations. Also add .insn in selected user access functions which would otherwise produce ISA mode jump incompatibilities. This is also a temporary fix. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add vdso support.Douglas Leung
Support vdso in microMIPS mode. Signed-off-by: Douglas Leung <Douglas.Leung@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add unaligned access support.Leonid Yegoshin
Add logic needed to handle unaligned accesses in microMIPS mode. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
2013-05-09MIPS: microMIPS: Support handling of delay slots.Leonid Yegoshin
Add logic needed to properly calculate exceptions for delay slots when in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Add support for exception handling.Steven J. Hill
All exceptions must be taken in microMIPS mode, never in classic MIPS mode or the kernel falls apart. A few NOP instructions are used to maintain the correct alignment of microMIPS versions of the exception vectors. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Floating point support.Leonid Yegoshin
Add logic needed to do floating point emulation in microMIPS mode. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Steven J. Hill <Steven. Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Fix macro naming in micro-assembler.Steven J. Hill
The macros did not properly take into account the ISA that the kernel was being compiled with. A classic MIPS kernel will have the standard 'uasm_i_##op' macro functions with 'MM_uasm_i_##op' macro functions for the microMIPS version. A pure microMIPS kernel will have the standard macros with 'CL_uasm_i_##op' macro functions for the classic version. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09MIPS: microMIPS: Fix incorrect mask for jump immediate.Steven J. Hill
Jump or branch target addresses have the first bit set. The original mask did not take this into account and will cause a field overflow warning for the target address when a jump immediate instruction is built. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-09KVM/MIPS32: Binary patching of select privileged instructions.Sanjay Lal
Currently, the following instructions are translated: - CACHE (indexed) - CACHE (va based): translated to a SYNCI, overkill on D-CACHE operations, but still much faster than a trap. - mfc0/mtc0: the virtual COP0 registers for the guest are implemented as 2-D array. [COP#][SEL] and this is mapped into the guest kernel address space @ VA 0x0. mfc0/mtc0 operations are transformed to load/stores. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: microMIPS: Support dynamic ASID sizing.Steven J. Hill
Changes for pure microMIPS cores to dynamically determine the ASID size at boot time. Includes bug fix https://patchwork.linux-mips.org/patch/5230/ Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org>
2013-05-08MIPS: Allow ASID size to be determined at boot time.Steven J. Hill
Original patch by Ralf Baechle and removed by Harold Koerfgen with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This allows for more generic kernels since the size of the ASID and corresponding masks can be determined at run-time. This patch is also required for the new Aptiv cores and has been tested on Malta and Malta Aptiv platforms. [ralf@linux-mips.org: Added relevant part of fix https://patchwork.linux-mips.org/patch/5213/] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: FW: malta: Code formatting clean-ups.Steven J. Hill
Clean-up code according to the 'checkpatch.pl' script. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: Remove obsolete header file for MTI platforms.Steven J. Hill
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of all inclusions of it by Malta and SEAD-3 platforms. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: ar7 powertv build"]. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: unbreak powertv build"]. [ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: malta: Use new common FW library variable processing.Steven J. Hill
Remove old YAMON prom code and use common firmware library code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: sead3: Use new common FW library variable processing.Steven J. Hill
Remove old YAMON prom code and use common firmware library code. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: FW: Add environment variable processing.Steven J. Hill
Add parsing of the environment and command line variables passed to the kernel to the firmware library. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: Add declarations to MIPS Technologies Inc. generic header.Steven J. Hill
Add declaration of 'mips_scroll_message' and 'mips_display_message' to the common generic header file for the MIPS Technologies Inc. development boards. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: sead3: Use generic suspend/resume for LEDs.Lars-Peter Clausen
Setting the LED_CORE_SUSPENDRESUME flag causes the LED driver core to call led_classdev_suspend/led_classdev_resume during suspend/resume. Since this is exactly what the driver's custom suspend/resume callbacks do we can replace them by setting the LED_CORE_SUSPENDRESUME flag. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-05-08MIPS: Export symbols used by KVM/MIPS moduleSanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: ASM offsets for VCPU arch specific fields.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: If KVM is enabled then use the KVM specific routine to flush the TLBs ↵Sanjay Lal
on a ASID wrap. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: Export routines needed by the KVM module.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Routines to handle specific traps/exceptions while executing the ↵Sanjay Lal
guest. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Guest interrupt delivery.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: COP0 accesses profiling.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Release notes and KVM module MakefileSanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: MMU/TLB operations for the Guest.Sanjay Lal
- Note that this file is statically linked with the rest of the host kernel (KSEG0). This is because kernel modules are loaded into mapped space on MIPS and we want to make sure that we don't get any host kernel TLB faults while manipulating TLBs. - Virtual Guest TLBs are implemented as 64 entry array regardless of the number of host TLB entries. - Shadow TLBs map Guest virtual addresses to Host physical addresses. - TLB miss handling details: Guest KSEG0 TLBMISS (0x40000000 – 0x60000000): Transparent to the Guest. Guest KSEG2/3 (0x60000000 – 0x80000000) & Guest UM TLBMISS (0x00000000 – 0x40000000) Lookup in Guest/Virtual TLB If an entry doesn’t match deliver appropriate TLBMISS LD/ST exception to the guest If entry does exist in the Guest TLB and is NOT Valid Deliver TLB invalid exception to the guest If entry does exist in the Guest TLB and is VALID Inject the TLB entry into the Shadow TLB Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Privileged instruction/target branch emulation.Sanjay Lal
- The Guest kernel is run in UM and privileged instructions cause a trap. - If the instruction causing the trap is in a branch delay slot, the branch needs to be emulated to figure out the PC @ which the guest will resume execution. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: KVM Guest kernel support.Sanjay Lal
Both Guest kernel and Guest Userspace execute in UM. The memory map is as follows: Guest User address space: 0x00000000 -> 0x40000000 Guest Kernel Unmapped: 0x40000000 -> 0x60000000 Guest Kernel Mapped: 0x60000000 -> 0x80000000 - Guest Usermode virtual memory is limited to 1GB. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: MIPS arch specific APIs for KVMSanjay Lal
- Implements the arch specific APIs for KVM, some are stubs for MIPS - kvm_mips_handle_exit(): Main 'C' distpatch routine for handling exceptions while in "Guest" mode. - Also implements in-kernel timer interrupt support for the guest. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Entry point for trampolining to the guest and trap handlers.Sanjay Lal
- __kvm_mips_vcpu_run: main entry point to enter guest, we save kernel context, load up guest context from and ERET to guest context. - mips32_exception: L1 exception handler(s), save k0/k1 and jump to main handlers. - mips32_GuestException: Generic exception handlers for exceptions/interrupts while in guest context. Save guest context, restore some kernel context and jump to main 'C' handler: kvm_mips_handle_exit() Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Arch specific KVM data structures.Sanjay Lal
Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08KVM/MIPS32: Infrastructure/build files.Sanjay Lal
- Add the KVM option to MIPS build files. - Add default config files for KVM host/guest kernels. - Change the link address for the Malta KVM Guest kernel to UM (0x40100000). - Add KVM Kconfig file with KVM/MIPS specific options Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08MIPS: IP27: Remove pfn_t.Ralf Baechle
In the Linux kernel traditionally pfns are represented by an unsigned long. However a few bits of the SGI IP27 platform code that were ported from IRIX are using pfn_t for historic reasons. This is conflicting with KVM's use of pfn_t. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-05-08Merge branch 'mips-next-3.10' of ↵Ralf Baechle
git://git.linux-mips.org/pub/scm/john/linux-john into mips-for-linux-next
2013-05-08MIPS: BCM63XX: add missing clocks for BCM6328 and BCM6362Jonas Gorski
Add some mosty unused, but missing clocks for BCM6328 and BCM6362. This also fixes PCIe init on BCM6362. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5200/ Acked-by: John Crispin <blogic@openwrt.org>
2013-05-08MIPS: ath79: make use of the new memory detection codeJohn Crispin
There is now a generic function for detecting memory size. Use this instead of the one found in the ath79 support. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5149/
2013-05-08MIPS: ralink: make use of the new memory detection codeJohn Crispin
Call detect_memory_region() from plat_mem_setup() unless the size was already read from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5184/
2013-05-08MIPS: ralink: add memory definition for MT7620John Crispin
Populate struct soc_info with the data that describes our RAM window. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5183/
2013-05-08MIPS: ralink: add memory definition for RT3883John Crispin
Populate struct soc_info with the data that describes our RAM window. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5182/
2013-05-08MIPS: ralink: add memory definition for RT2880John Crispin
Populate struct soc_info with the data that describes our RAM window. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5181/
2013-05-08MIPS: ralink: add memory definition for RT305xJohn Crispin
Populate struct soc_info with the data that describes our RAM window. As memory detection fails on RT5350 we read the amount of available memory from the system controller. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5180/
2013-05-08MIPS: ralink: add memory definition to struct ralink_soc_infoJohn Crispin
Depending on the actual SoC we have a different base address as well as minimum and maximum size for RAM. Add these fields to the per SoC structure. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5179/
2013-05-08MIPS: add detect_memory_region()John Crispin
Add a generic way of detecting the available RAM. This function is based on the implementation already used by ath79. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5178/
2013-05-08DT: MIPS: ralink: add MT7620A dts filesJohn Crispin
Add a dtsi file for MT7620A SoC and a sample dts file. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5190/
2013-05-08DT: MIPS: ralink: add RT3883 dts filesJohn Crispin
Add a dtsi file for RT3883 SoC and a sample dts file. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5189/
2013-05-08DT: MIPS: ralink: add RT2880 dts filesJohn Crispin
Add a dtsi file for RT2880 SoC and a sample dts file. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5188/
2013-05-08DT: MIPS: ralink: clean up RT3050 dtsi and dts fileJohn Crispin
* remove nodes for cores whose drivers are not upstream yet * add compat string for an additional soc * fix a whitespace error Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: http://patchwork.linux-mips.org/patch/5186/
2013-05-08MIPS: ralink: add cpu-feature-overrides.hGabor Juhos
Add cpu-feature-overrides.h for RT288x, RT305x and RT3883. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5175/
2013-05-08MIPS: ralink: adds support for MT7620 SoC familyJohn Crispin
Add support code for mt7620 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Gabor Juhos <juhosg@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/5177/
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 13:46:04 +0000