summaryrefslogtreecommitdiffstats
path: root/arch/mips
AgeCommit message (Collapse)Author
2011-10-26Merge branch 'tty-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) TTY: serial_core: Fix crash if DCD drop during suspend tty/serial: atmel_serial: bootconsole removed from auto-enumerates Revert "TTY: call tty_driver_lookup_tty unconditionally" tty/serial: atmel_serial: add device tree support tty/serial: atmel_serial: auto-enumerate ports tty/serial: atmel_serial: whitespace and braces modifications tty/serial: atmel_serial: change platform_data variable name tty/serial: RS485 bindings for device tree TTY: call tty_driver_lookup_tty unconditionally TTY: pty, release tty in all ptmx_open fail paths TTY: make tty_add_file non-failing TTY: drop driver reference in tty_open fail path 8250_pci: Fix kernel panic when pch_uart is disabled h8300: drivers/serial/Kconfig was moved parport_pc: release IO region properly if unsupported ITE887x card is found tty: Support compat_ioctl get/set termios_locked hvc_console: display printk messages on console. TTY: snyclinkmp: forever loop in tx_load_dma_buffer() tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case) ... Fix up Conflicts in: - drivers/tty/serial/8250_pci.c Trivial conflict with removed duplicate device ID - drivers/tty/serial/atmel_serial.c Annoying silly conflict between "specify the port num via platform_data" and other changes to atmel_console_init
2011-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits) dp83640: free packet queues on remove dp83640: use proper function to free transmit time stamping packets ipv6: Do not use routes from locally generated RAs |PATCH net-next] tg3: add tx_dropped counter be2net: don't create multiple RX/TX rings in multi channel mode be2net: don't create multiple TXQs in BE2 be2net: refactor VF setup/teardown code into be_vf_setup/clear() be2net: add vlan/rx-mode/flow-control config to be_setup() net_sched: cls_flow: use skb_header_pointer() ipv4: avoid useless call of the function check_peer_pmtu TCP: remove TCP_DEBUG net: Fix driver name for mdio-gpio.c ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces ipv4: fix ipsec forward performance regression jme: fix irq storm after suspend/resume route: fix ICMP redirect validation net: hold sock reference while processing tx timestamps tcp: md5: add more const attributes Add ethtool -g support to virtio_net ... Fix up conflicts in: - drivers/net/Kconfig: The split-up generated a trivial conflict with removal of a stale reference to Documentation/networking/net-modules.txt. Remove it from the new location instead. - fs/sysfs/dir.c: Fairly nasty conflicts with the sysfs rb-tree usage, conflicting with Eric Biederman's changes for tagged directories.
2011-10-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits) MAINTAINERS: linux-m32r is moderated for non-subscribers linux@lists.openrisc.net is moderated for non-subscribers Drop default from "DM365 codec select" choice parisc: Kconfig: cleanup Kernel page size default Kconfig: remove redundant CONFIG_ prefix on two symbols cris: remove arch/cris/arch-v32/lib/nand_init.S microblaze: add missing CONFIG_ prefixes h8300: drop puzzling Kconfig dependencies MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers tty: drop superfluous dependency in Kconfig ARM: mxc: fix Kconfig typo 'i.MX51' Fix file references in Kconfig files aic7xxx: fix Kconfig references to READMEs Fix file references in drivers/ide/ thinkpad_acpi: Fix printk typo 'bluestooth' bcmring: drop commented out line in Kconfig btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888' doc: raw1394: Trivial typo fix CIFS: Don't free volume_info->UNC until we are entirely done with it. treewide: Correct spelling of successfully in comments ...
2011-10-24MIPS: O32: Provide definition of registers ta0 .. ta3.Ralf Baechle
Later IRIX versions provide them in <sys/regdef.h> and gas also accepts $ta0 .. $ta3 since binutils 2.18 so Linux should do the same for source compatibility.
2011-10-24MIPS: perf: Add Octeon support for hardware perf.David Daney
Enable hardware counters for Octeon, and add the corresponding event mappings. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2790/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Add support for 64-bit perf counters.David Daney
The hard coded constants are moved to struct mips_pmu. All counter register access move to the read_counter and write_counter function pointers, which are set to either 32-bit or 64-bit access methods at initialization time. Many of the function pointers in struct mips_pmu were not needed as there was only a single implementation, these were removed. I couldn't figure out what made struct cpu_hw_events.msbs[] at all useful, so I removed it too. Some functions and other declarations were reordered to reduce the need for forward declarations. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2792/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Reorganize contents of perf support files.David Daney
The contents of arch/mips/kernel/perf_event.c and arch/mips/kernel/perf_event_mipsxx.c were divided in a seemingly ad hoc manner, with the first including the second. I moved all the hardware counter support code to perf_event_mipsxx.c and removed the gating #ifdefs to the Kconfig and Makefile. Now perf_event.c contains only the callchain support, everything else is in perf_event_mipsxx.c There are no code changes, only moving of functions from one file to the other, or removing empty unneeded functions. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dezhong Diao <dediao@cisco.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2791/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.cDavid Daney
Get rid of a bunch of useless inline declarations, and join a bunch of improperly split lines. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2793/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add accessor macros for 64-bit performance counter registers.David Daney
Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2789/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add probes for more Octeon II CPUs.David Daney
Detect cn61XX, cn66XX and cn68XX CPUs in cpu_probe_cavium(). Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2777/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Add more CPU identifiers for Octeon II CPUs.David Daney
The CPU identifiers for cn68XX, cn66XX and cn61XX are known, so add them. Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2776/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: XLR, XLS: Add comment for smp setupHillf Danton
It seems that BSP could be setup twice, but the nlm_cpu_ready array is only set for ASPs in smpboot.S, not including BSP. Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: "Jayachandran C." <jayachandranc@netlogicmicro.com> Cc: LKML <linux-kernel@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2695/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>,
2011-10-24MIPS: JZ4740: GPIO: Check correct IRQ in demux handlerLars-Peter Clausen
Check the trigger direction for the triggered IRQ instead of the parent IRQ. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/2433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: JZ4740: GPIO: Simplify IRQ demuxerLars-Peter Clausen
We already know the base IRQ for a GPIO chip, so there is no need to recalculate it in the demux handler. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Lars-Peter Clausen <lars@metafoo.de> Patchwork: http://patchwork.linux-mips.org/patch/2432/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: JZ4740: Use generic irq chipLars-Peter Clausen
Use the generic irq chip framework to implement the jz4740 INTC and GPIO irq chips. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2434/ Patchwork: https://patchwork.linux-mips.org/patch/2771/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: kill au1xxx.h headerManuel Lauss
No longer required Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2705/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-24MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? definesManuel Lauss
This patch gets rid of all CONFIG_SOC_AU1XXX defines in DMA/DBDMA-related code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2704/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header depManuel Lauss
au1xxx-ide uses defines from the pb1200/db1200 headers: get DBDMA ID through platform resource information, hardcode register spacing. The only 2 users of this driver (and the only boards it can really work on realiably) use the same register layout. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Cc: linux-ide@vger.kernel.org To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-ide@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Patchwork: https://patchwork.linux-mips.org/patch/2716/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Redo PCI as platform driverManuel Lauss
- Rewrite Alchemy PCI support as a platform driver. - Fixup boards which have PCI. Run-tested on DB1500 and DB1550. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/pci.c delete mode 100644 arch/mips/pci/fixup-au1000.c delete mode 100644 arch/mips/pci/ops-au1000.c create mode 100644 arch/mips/pci/pci-alchemy.c
2011-10-24MIPS: Alchemy: more base address cleanupManuel Lauss
remove all redundant peripheral base address defines, fix all affected boards and drivers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2700/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: rewrite USB platform setup.Manuel Lauss
Use runtime CPU detection to setup all USB parts. Remove the Au1200 OTG and UDC platform devices since there are no drivers for them anyway. Clean up the USB address mess in the au1000 header. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2703/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: abstract USB block control register accessManuel Lauss
Alchemy chips have one or more registers which control access to the usb blocks as well as PHY configuration. I don't want the OHCI/EHCI glues to know about the different registers and bits; new code hides the gory details of USB configuration from them. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Patchwork: https://patchwork.linux-mips.org/patch/2709/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 drivers/usb/host/alchemy-common.c
2011-10-24MIPS: Remove __init from add_wired_entry()Manuel Lauss
For Alchemy-PCI I need to add a wired entry after resuming from RAM; remove the __init from add_wired_entry() so that this actually works. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2684/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: support multiple GPIO styles in one kernelManuel Lauss
For GPIOLIB=y decide at runtime which gpiochips to register; in the GPIOLIB=n case, the gpio headers need to be reshuffled a bit to make multiple implementations coexist peacefully. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2679/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24MIPS: Alchemy: Always build power codeManuel Lauss
No reason NOT to build it Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24NET: au1000_eth: Pass MACDMA address through platform resource info.Manuel Lauss
This patch removes the last hardcoded base address from the au1000_eth driver. The base address of the MACDMA unit was derived from the platform device id; if someone registered the MACs in inverse order both would not work. So instead pass the base address of the DMA unit to the driver with the other platform resource information. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Acked-by: David S. Miller <davem@davemloft.net> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2674/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-20MIPS: Fix build with C=1Aaro Koskinen
When trying to compile the 3.1-rc10 kernel for my MIPS board with C=1 (sparse checking), the build fails early with the error: CHK include/linux/version.h UPD include/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h Checking missing-syscalls for N32 CALL scripts/checksyscalls.sh Checking missing-syscalls for O32 CALL scripts/checksyscalls.sh CC kernel/bounds.s GEN include/generated/bounds.h CC arch/mips/kernel/asm-offsets.s GEN include/generated/asm-offsets.h CALL scripts/checksyscalls.sh HOSTCC scripts/genksyms/genksyms.o SHIPPED scripts/genksyms/lex.lex.c SHIPPED scripts/genksyms/keywords.hash.c SHIPPED scripts/genksyms/parse.tab.h HOSTCC scripts/genksyms/lex.lex.o SHIPPED scripts/genksyms/parse.tab.c HOSTCC scripts/genksyms/parse.tab.o HOSTLD scripts/genksyms/genksyms /bin/sh: Syntax error: "(" unexpected make[3]: *** [scripts/mod/empty.o] Error 2 make[2]: *** [scripts/mod] Error 2 make[1]: *** [scripts] Error 2 It seems the shell chokes because sparse is called with command line arguments such as: -D__INT8_C(c)='c' Converting these to form: -D'__INT8_C(c)'='c' seems to fix the problem. [ralf@linux-mips.org: This affects builds with gcc 4.5 and newer.] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2827/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: MSP71xx: Fix build error.Ralf Baechle
After the recent cleanup of the register_*_smp_ops() functions msp71xx wasn't fixed to include the now necessary header resulting in: /home/ralf/src/linux/upstream-linus/arch/mips/pmc-sierra/msp71xx/msp_setup.c: In function ‘prom_init’: /home/ralf/src/linux/upstream-linus/arch/mips/pmc-sierra/msp71xx/msp_setup.c:231:2: error: implicit declaration of function ‘register_vsmp_smp_ops’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: Don't install vmlinuz if compressed kernel has not been configured.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: Netlogic: Specify architecture CFLAGSJayachandran C
Use -march=xlr if available, otherwise fallback to mips64. This allows us to support compilation with MIPS toolchains which are not customized for XLR. [ralf@linux-mips.org: And more importantly it works around a gas bug in binutils 2.21 which otherwise may result in an assertion failure building arch/mips/kernel/genex.S. See http://sourceware.org/bugzilla/show_bug.cgi?id=12915 for details.] Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2534/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS:Netlogic:Fix section mismatch warnings.Jayachandran C
Add __init and __cpuinit annotation to functions that need it. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2535/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20Revert "MIPS: LD/SD o32 macro GAS fix update"Ralf Baechle
This reverts commit 97475f8b42e83be2966aa2d70ab9c98477701c53 (lmo) / 82b89152f00f7ad17844d5614d5011e8d7944ac9 (kernel.org) [MIPS: LD/SD o32 macro GAS fix update]. Turns out this patch is producing many build errors with gcc 4.2. Based on further testing with a test case extracted from the build errors found further build errors and suboptimal generation even in violation of the "R" constraint. To make matters worse, the binutils changes also don't work quite as intended so revert this patch for now.
2011-10-20MIPS: SNI: Fix conflicting wrapper symbols for headers.Ralf Baechle
If Open Firmware / Device Tree support is enabled on a SNI RM kernel both <asm/mipsprom.h> and <asm/prom.h> will be included into some .c files. Since both headers use the same wrapper symbol only the inclusion of the first file will have an effect but the 2nd file will be ignored resulting in a build error. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: PNX8550: Fix section mismatchRalf Baechle
Triggered by pnx8550-jbs_defconfig and pnx8550-stb810_defconfig: WARNING: vmlinux.o(.text+0xc0c): Section mismatch in reference from the function prom_getcmdline() to the variable .init.data:arcs_cmdline The function prom_getcmdline() references the variable __initdata arcs_cmdline. This is often because prom_getcmdline lacks a __initdata annotation or the annotation of arcs_cmdline is wrong. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: 32-bit: Fix number of argument to epoll_wait.Ralf Baechle
The number of arguments only matters for syscalls with stack arguments that is using 5 or more argument slots so this is just cosmetic fix. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: IP27: Sort out section mismatch.Ralf Baechle
WARNING: vmlinux.o(.text+0x3059f8): Section mismatch in reference from the function pcibios_plat_dev_init() to the function .devinit.text:request_bridge_irq() The function pcibios_plat_dev_init() references the function __devinit request_bridge_irq(). This is often because pcibios_plat_dev_init lacks a __devinit annotation or the annotation of request_bridge_irq is wrong. Fixing this one leads to: WARNING: vmlinux.o(.text+0x1790): Section mismatch in reference from the function request_bridge_irq() to the function .devinit.text:register_bridge_irq() The function request_bridge_irq() references the function __devinit register_bridge_irq(). This is often because request_bridge_irq lacks a __devinit annotation or the annotation of register_bridge_irq is wrong. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20MIPS: cache: Provide cache flush operations for XFSRalf Baechle
Until now flush_kernel_vmap_range() and invalidate_kernel_vmap_range() did not exist on MIPS resulting in heavy cache corruption on XFS filesystems. Left for the post-3.0 time: optimization and make this work with highmem, too. Since the combination of highmem + cache aliases atm doesn't work this isn't a regression. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2505/
2011-10-01MIPS: Call oops_enter, oops_exit in dieNathan Lynch
This allows pause_on_oops and mtdoops to work. Signed-off-by: Nathan Lynch <ntl@pobox.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-24MIPS: Octeon: Enable C0_UserLocal probing.David Daney
Octeon2 processor cores have a UserLocal register. Remove the hard coded negative probe and allow the standard probing to detect this feature. Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2578/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-21MIPS: No branches in delay slots for huge pages in handle_tlblDavid Daney
For the case PM_DEFAULT_MASK == 0, we were placing a branch in the delay slot of another branch. This leads to undefined behavior. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2775/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTCDavid Daney
Reported-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/2753/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Octeon: Select CONFIG_HOLES_IN_ZONEDavid Daney
Current Octeon systems do in fact have holes in their memory zones. We need to select HOLES_IN_ZONE. If we do not, some memory configurations will result in crashes at boot time like this: . . . CPU 6 Unable to handle kernel paging request at virtual address 0000000000700000, epc == ffffffff8118fe00, ra == ffffffff8118fe9c Oops[#1]: Cpu 6 . . . ... Call Trace: [<ffffffff8118fe00>] setup_per_zone_wmarks+0x1b0/0x338 [<ffffffff815cd738>] init_per_zone_wmark_min+0x64/0xd0 [<ffffffff81100438>] do_one_initcall+0x38/0x160 . . . Reported-by: Jason Kwon <jason.kwon@ericsson.com> Signed-off-by: David Daney <david.daney@cavium.com> To: linux-mips@linux-mips.org Cc: Jason Kwon <jason.kwon@ericsson.com> Patchwork: https://patchwork.linux-mips.org/patch/2724/ Tested-by: Guenter Roeck<guenter.roeck@ericsson.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: PM: Use struct syscore_ops instead of sysdevs for PM (v2)Rafael J. Wysocki
Convert some MIPS architecture's code to using struct syscore_ops objects for power management instead of sysdev classes and sysdevs. This simplifies the code and reduces the kernel's memory footprint. It also is necessary for removing sysdevs from the kernel entirely in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-and-tested-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-kernel@vger.kernel.org Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Patchwork: http://patchwork.linux-mips.org/patch/2431/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Compat: Use 32-bit wrapper for compat_sys_futex.Yong Zhang
We can't trust userspace to pass signed-extend arguments. Not correctly sign-extended arguments to futex-wait result in architecturally undefined operation of 32-bit arithmetic instructions. For example, if 'val' is too big and bit-31 is 1, the caller may enter endless loop at: futex_wait_setup() { ... if (uval != val) { queue_unlock(q, *hb); ret = -EWOULDBLOCK; ... } Signed-off-by: Yong Zhang <yong.zhang@windriver.com> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2714/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Do not use EXTRA_CFLAGSArnaud Lacombe
Usage of these flags has been deprecated for nearly 4 years by: commit f77bf01425b11947eeb3b5b54685212c302741b8 Author: Sam Ravnborg <sam@neptun.(none)> Date: Mon Oct 15 22:25:06 2007 +0200 kbuild: introduce ccflags-y, asflags-y and ldflags-y Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command line use. By default, gmake(1) do not override command line setting, so this is likely to result in build failure or unexpected behavior. Replace their usage by Kbuild's `{as,cc,ld}flags-y'. To: linux-kernel@vger.kernel.org Cc: Sam Ravnborg <sam@ravnborg.org> Patchwork: https://patchwork.linux-mips.org/patch/2710/ Cc: linux-mips@linux-mips.org Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Alchemy: DB1200: Disable cascade IRQ in handlerManuel Lauss
Disable the cascade IRQ in the cascade handler. This is required to get the DB1300 working, and also gets rid of all spurious interrupts previously observed on the DB1200; so Config[OD] can be disabled again for better performance. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>