summaryrefslogtreecommitdiffstats
path: root/arch/mips
AgeCommit message (Collapse)Author
2010-10-04MIPS: Octeon: Place cnmips_cu2_setup in __init memory.David Daney
It is an early_initcall, so it should be in __init memory. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1593/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Don't place cu2 notifiers in __cpuinitdataDavid Daney
The notifiers may be called at any time, so the notifier_block cannot be in init memory. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1592/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.binShmulik Ladkani
Fix VMLINUZ_LOAD_ADDRESS calculation to be based on the length of vmlinux.bin, the actual uncompressed kernel binary. Previously it was based on the length of KBUILD_IMAGE (the unstripped ELF vmlinux), which is bigger than vmlinux.bin. As a result, vmlinuz was loaded into a memory address higher then actually needed - a problem for small memory platforms. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> To: linux-mips@linux-mips.org Cc: alex@digriz.org.uk Cc: manuel.lauss@googlemail.com Cc: sam@ravnborg.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1564/ Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Alchemy: Resolve prom section mismatchesManuel Lauss
The function prom_init_cmdline() references the variable __initdata arcs_cmdline. The function prom_get_ethernet_addr() references the variable __initdata arcs_cmdline. Annotate prom_init_cmdline() as __init, unexport and annotate prom_get_ethernet_addr() since it's no longer called from within driver code. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1547/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Fix syscall 64 bit number comments.Ralf Baechle
Noticed and original patch by Philby John <pjohn@mvista.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1553/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGNFUJITA Tomonori
Architectures need to set ARCH_DMA_MINALIGN to the minimum DMA alignment (commit a6eb9fe105d5de0053b261148cee56c94b4720ca). Defining ARCH_KMALLOC_MINALIGN doesn't work anymore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: anemo@mba.ocn.ne.jp Patchwork: https://patchwork.linux-mips.org/patch/1544/ Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: N32: Fix getdents64 syscall for n32Bernhard Walle
Commit 31c984a5acabea5d8c7224dc226453022be46f33 introduced a new syscall getdents64. However, in the syscall table, the new syscall still refers to the old getdents which doesn't work. The problem appeared with a system that uses the eglibc 2.12-r11187 (that utilizes that new syscall) is very confused. The fix has been tested with that eglibc version. Signed-off-by: Bernhard Walle <walle@corscience.de> To: linux-mips@linux-mips.org Cc: ddaney@caviumnetworks.com Cc: akpm@linux-foundation.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1567/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Remove pr_<level> uses of KERN_<level>Joe Perches
These would result in KERN_<level> actually getting printed. Signed-off-by: Joe Perches <joe@perches.com> To: Jiri Kosina <trivial@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1581/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: PNX8550: Sort out machine halt, restart and powerdown functions.Ralf Baechle
No rubbish printks - those belong to userspace. The halt function now actually halts the system and the poweroff function was deleted because it didn't actually power down the system. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: GIC: Remove dependencies from Malta files.Ralf Baechle
This prevents the GIC code from being reusable sanely. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Kconfig: Fix and clarify kconfig help text for VSMP and SMTC.Ralf Baechle
Only VSMP was known as SMVP and generally the help text was too short to be helpful. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.Ralf Baechle
This only matters for ISA devices with a 24-bit DMA limit or for devices with a 32-bit DMA limit on systems with ZONE_DMA32 enabled. The latter currently only affects 32-bit PCI cards on Sibyte-based systems with more than 1GB RAM installed. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Audit: Fix hang in entry.S.Ralf Baechle
_TIF_WORK_MASK false had _TIF_SYSCALL_AUDIT set. If a thread's _TIF_SYSCALL_AUDIT is ever set this will lead to an endless loop on the way out from a syscall. Currently this is only a theoretic bug as init/Kconfig doesn't allow AUDIT_SYSCALL to be enabled for MIPS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Document why RELOC_HIDE is there.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Octeon: Determine if helper needs to be builtAndreas Bießmann
This patch adds an config switch to determine if we need to build some workaround helper files. The staging driver octeon-ethernet references some symbols which are only built when PCI is enabled. The new config switch enables these symbols in bothe cases. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> To: linux-kernel@vger.kernel.org Cc: Andreas Bießmann <biessmann@corscience.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1543/ Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Use generic atomic64 for 32-bit kernelsDeng-Cheng Zhu
The 64-bit kernel has already had its atomic64 functions. Except for that, we use the generic spinlocked version. The atomic64 types and related functions are needed for the Linux performance counter subsystem. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Patchwork: https://patchwork.linux-mips.org/patch/1361/ Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: RM7000: Symbol should be staticRicardo Mendoza
Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1540/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: kspd: Adjust confusing if indentationJulia Lawall
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org To: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1539/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-04MIPS: Fix a typo.Andrea Gelmini
"Userpace" -> "Userspace" Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Martin Hicks <mort@sgi.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1536/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-09-14compat: Make compat_alloc_user_space() incorporate the access_ok()H. Peter Anvin
compat_alloc_user_space() expects the caller to independently call access_ok() to verify the returned area. A missing call could introduce problems on some architectures. This patch incorporates the access_ok() check into compat_alloc_user_space() and also adds a sanity check on the length. The existing compat_alloc_user_space() implementations are renamed arch_compat_alloc_user_space() and are used as part of the implementation of the new global function. This patch assumes NULL will cause __get_user()/__put_user() to either fail or access userspace on all architectures. This should be followed by checking the return value of compat_access_user_space() for NULL in the callers, at which time the access_ok() in the callers can also be removed. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@kernel.org>
2010-08-17Make do_execve() take a const filename pointerDavid Howells
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-15Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd/nand_ids: Fix buswidth mtd/m25p80: fix test for end of loop mtd/m25p80: retlen is never NULL MIPS: Fix gen_nand probe structures contents gen_nand: Test if nr_chips field is valid BFIN: Fix gen_nand probe structures contents nand/denali: move all hardware initialization work to denali_hw_init nand/denali: Add a page check in denali_read_page & denali_read_page_raw nand/denali: use cpu_relax() while waiting for hardware interrupt nand/denali: change read_status function method nand/denali: Fixed check patch warnings ARM: Fix gen_nand probe structures contents mtd/nand_base: fix kernel-doc warnings & typos nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk nand/denali: Fixed handle ECC error bugs nand/denali: use iowrite32() to replace denali_write32() nand/denali: Fixed probe function bugs
2010-08-14defconfig reductionSam Ravnborg
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-13Mark arguments to certain syscalls as being constDavid Howells
Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12MIPS: Fix gen_nand probe structures contentsMarek Vasut
This platform didn't properly fill nr_chips in gen_nand registration and therefore depended on gen_nand bug fixed by commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb ("mtd: gen_nand: fix support for multiple chips") Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-11dma-mapping: remove dma_is_consistent APIFUJITA Tomonori
Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dma-mapping: unify dma_get_cache_alignment implementationsFUJITA Tomonori
dma_get_cache_alignment returns the minimum DMA alignment. Architectures defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we can unify dma_get_cache_alignment implementations. Note that some architectures implement dma_get_cache_alignment wrongly. dma_get_cache_alignment() should return the minimum DMA alignment. So fully-coherent architectures should return 1. This patch also fixes this issue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGNFUJITA Tomonori
Now each architecture has the own dma_get_cache_alignment implementation. dma_get_cache_alignment returns the minimum DMA alignment. Architectures define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed buffer is DMA-safe; the buffer doesn't share a cache with the others). So we can unify dma_get_cache_alignment implementations. This patch: dma_get_cache_alignment() needs to know if an architecture defines ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA alignment restriction). However, slab.h define ARCH_KMALLOC_MINALIGN if architectures doesn't define it. Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN. ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub (except for crypto). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-10tty: Add EXTPROC support for LINEMODEhyc@symas.com
This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10tty: remove remaining Hayes ESP ioctlsGreg Kroah-Hartman
As Jeff Dike pointed out, the Hayes ESP driver was removed in commit f53a2ade0bb9f2a81f473e6469155172a96b7c38, so these ioctl definitions should also be removed. This cleans up the remaining arch-specific locations of this ioctl value. Thanks to Arnd for pointing these out. Cc: Jeff Dike <jdike@addtoit.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-09kmap_atomic: make kunmap_atomic() harder to misuseCesar Eduardo Barros
kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse" list[1] ("Follow common convention and you'll get it wrong"), except in some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3]. kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes takes a pointer to within the page itself. This seems to once in a while trip people up (the convention they are following is the one from kunmap()). Make it much harder to misuse, by moving it to level 9 on Rusty's list[4] ("The compiler/linker won't let you get it wrong"). This is done by refusing to build if the type of its first argument is a pointer to a struct page. The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck() (which is what you would call in case for some strange reason calling it with a pointer to a struct page is not incorrect in your code). The previous version of this patch was compile tested on x86-64. [1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html [2] In these cases, it is at level 5, "Do it right or it will always break at runtime." [3] At least mips and powerpc look very similar, and sparc also seems to share a common ancestor with both; there seems to be quite some degree of copy-and-paste coding here. The include/asm/highmem.h file for these three archs mention x86 CPUs at its top. [4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html [5] As an aside, could someone tell me why mn10300 uses unsigned long as the first parameter of kunmap_atomic() instead of void *? Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Cc: Russell King <linux@arm.linux.org.uk> (arch/arm) Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips) Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300) Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300) Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc) Cc: Helge Deller <deller@gmx.de> (arch/parisc) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc) Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc) Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc) Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86) Cc: Ingo Molnar <mingo@redhat.com> (arch/x86) Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86) Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic) Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list) Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09add f_flags to struct statfs(64)Christoph Hellwig
Add a flags field to help glibc implementing statvfs(3) efficiently. We copy the flag values from glibc, and add a new ST_VALID flag to denote that f_flags is implemented. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-07remove needless ISA_DMA_THRESHOLDFUJITA Tomonori
Architectures don't need to define ISA_DMA_THRESHOLD anymore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: James Bottomley <James.Bottomley@suse.de> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-06Merge branch 'timers-timekeeping-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um: Fix read_persistent_clock fallout kgdb: Do not access xtime directly powerpc: Clean up obsolete code relating to decrementer and timebase powerpc: Rework VDSO gettimeofday to prevent time going backwards clocksource: Add __clocksource_updatefreq_hz/khz methods x86: Convert common clocksources to use clocksource_register_hz/khz timekeeping: Make xtime and wall_to_monotonic static hrtimer: Cleanup direct access to wall_to_monotonic um: Convert to use read_persistent_clock timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset powerpc: Cleanup xtime usage powerpc: Simplify update_vsyscall time: Kill off CONFIG_GENERIC_TIME time: Implement timespec_add x86: Fix vtime/file timestamp inconsistencies Trivial conflicts in Documentation/feature-removal-schedule.txt Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as per Thomas' earlier merge commit 47916be4e28c ("Merge branch 'powerpc.cherry-picks' into timers/clocksource")
2010-08-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits) tracing/kprobes: unregister_trace_probe needs to be called under mutex perf: expose event__process function perf events: Fix mmap offset determination perf, powerpc: fsl_emb: Restore setting perf_sample_data.period perf, powerpc: Convert the FSL driver to use local64_t perf tools: Don't keep unreferenced maps when unmaps are detected perf session: Invalidate last_match when removing threads from rb_tree perf session: Free the ref_reloc_sym memory at the right place x86,mmiotrace: Add support for tracing STOS instruction perf, sched migration: Librarize task states and event headers helpers perf, sched migration: Librarize the GUI class perf, sched migration: Make the GUI class client agnostic perf, sched migration: Make it vertically scrollable perf, sched migration: Parameterize cpu height and spacing perf, sched migration: Fix key bindings perf, sched migration: Ignore unhandled task states perf, sched migration: Handle ignored migrate out events perf: New migration tool overview tracing: Drop cpparg() macro perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call ... Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-05Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: debug_core,kdb: fix crash when arch does not have single step kgdb,x86: use macro HBP_NUM to replace magic number 4 kgdb,mips: remove unused kgdb_cpu_doing_single_step operations mm,kdb,kgdb: Add a debug reference for the kdb kmap usage KGDB: Remove set but unused newPC ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump ftrace,kdb: Extend kdb to be able to dump the ftrace buffer kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE arm,kgdb: Add ability to trap into debugger on notify_die gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set() gdbstub: Implement gdbserial 'p' and 'P' packets kgdb,arm: Individual register get/set for arm kgdb,mips: Individual register get/set for mips kgdb,x86: Individual register get/set for x86 kgdb,kdb: individual register set and and get API gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol kgdb: remove custom hex_to_bin()implementation
2010-08-05Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: modpost: support objects with more than 64k sections trivial: fix a typo in a filename frv: clean up arch/frv/Makefile kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line Kbuild: Add option to set -femit-struct-debug-baseonly Makefile: "make kernelrelease" should show the correct full kernel version Makefile.build: make KBUILD_SYMTYPES work again
2010-08-05kgdb,mips: remove unused kgdb_cpu_doing_single_step operationsJason Wessel
The mips kgdb specific code does not support software or HW single stepping so it should not implement Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> CC: linux-mips@linux-mips.org
2010-08-05kgdb,mips: Individual register get/set for mipsJason Wessel
Implement the ability to individually get and set registers for kdb and kgdb for mips. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> CC: linux-mips@linux-mips.org
2010-08-05MIPS: PowerTV: Separate PowerTV USB support from non-USB codeDavid VomLehn
Separate USB code into a file separate from asic/asic_devices. Separating the USB code from everything else in asic/asic_devices.c goes a long way toward reducing the use of that file as a dumping ground for everything that didn't seem to fit anywhere else. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Cc: greg@kroah.com Cc: linux-usb@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1522/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: strip the un-needed sections of vmlinuzWu Zhangjin
This patch use "strip -s" to strip the .symtab and .strtab sections of vmlinuz. Note: This patch is based on http://patchwork.linux-mips.org/patch/1324/ Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1383/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESSWu Zhangjin
We have calculated VMLINUZ_LOAD_ADDRESS in shell, which is indecipherable. This patch rewrites it in C. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips <linux-mips@linux-mips.org> Cc: Alexander Clouter <alex@digriz.org.uk> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alexander Clouter <alex@digriz.org.uk> Patchwork: https://patchwork.linux-mips.org/patch/1324/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Clean up arch/mips/boot/compressed/decompress.cWu Zhangjin
- Remove several outdated comments - Clearify the definition of zimage_start and zimage_size and the their usage Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1382/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Clean up arch/mips/boot/compressed/ld.scriptWu Zhangjin
- Remove unused symbols: _fdata, _text; only _edata and _end are needed by head.S - Remove unused sections: .sbss, .stab, .gptab.sdata, .gptab.sbss - Change the alignment to 16 bytes to ensure it is greater than any fundamental type of a MIPS compiler. - Clean up comments Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1381/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Unify the suffix of compressed vmlinux.binWu Zhangjin
The compressed vmlinux.bin is only a temp file so it's ok to use the same suffix .z for them (.gz,.lzo,.lzma...) to remove several lines and simpify the maintenance (no need to add the "suffix_$(xxx) := suffix" line). Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips <linux-mips@linux-mips.org> Cc: Alexander Clouter <alex@digriz.org.uk> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Patchwork: https://patchwork.linux-mips.org/patch/1323/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-08-05MIPS: PowerTV: Add Gaia platform definitions.David VomLehn
Define ASIC address, memory preallocations, and initialization code for the Gaia platform. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1519/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: BCM47xx: Fix nvram_getenv return value.Hauke Mehrtens
Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on success and -9 if the value was not found. If the input was wrong -8 will be returned by cfe_getenv. Change nvram_getenv to do the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Waldemar Brodkorb <wbx@openadk.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1520/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-06 13:26:34 +0000