summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/setup-common.c
AgeCommit message (Collapse)Author
2012-03-28Disintegrate asm/system.h for PowerPCDavid Howells
Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
2012-02-23fadump: Invalidate the fadump registration during machine shutdown.Mahesh Salgaonkar
If dump is active during system reboot, shutdown or halt then invalidate the fadump registration as it does not get invalidated automatically. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23fadump: Convert firmware-assisted cpu state dump data into elf notes.Mahesh Salgaonkar
When registered for firmware assisted dump on powerpc, firmware preserves the registers for the active CPUs during a system crash. This patch reads the cpu register data stored in Firmware-assisted dump format (except for crashing cpu) and converts it into elf notes and updates the PT_NOTE program header accordingly. The exact register state for crashing cpu is saved to fadump crash info structure in scratch area during crash_fadump() and read during second kernel boot. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-10-31powerpc: various straight conversions from module.h --> export.hPaul Gortmaker
All these files were including module.h just for the basic EXPORT_SYMBOL infrastructure. We can shift them off to the export.h header which is a way smaller footprint and thus realize some compile time gains. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-25Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits) drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c powerpc/85xx: fix mpic configuration in CAMP mode powerpc: Copy back TIF flags on return from softirq stack powerpc/64: Make server perfmon only built on ppc64 server devices powerpc/pseries: Fix hvc_vio.c build due to recent changes powerpc: Exporting boot_cpuid_phys powerpc: Add CFAR to oops output hvc_console: Add kdb support powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon powerpc/irq: Quieten irq mapping printks powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs powerpc: Add mpt2sas driver to pseries and ppc64 defconfig powerpc: Disable IRQs off tracer in ppc64 defconfig powerpc: Sync pseries and ppc64 defconfigs powerpc/pseries/hvconsole: Fix dropped console output hvc_console: Improve tty/console put_chars handling powerpc/kdump: Fix timeout in crash_kexec_wait_realmode powerpc/mm: Fix output of total_ram. powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards powerpc: Correct annotations of pmu registration functions ... Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and drivers/cpufreq
2011-07-12KVM: PPC: Add support for Book3S processors in hypervisor modePaul Mackerras
This adds support for KVM running on 64-bit Book 3S processors, specifically POWER7, in hypervisor mode. Using hypervisor mode means that the guest can use the processor's supervisor mode. That means that the guest can execute privileged instructions and access privileged registers itself without trapping to the host. This gives excellent performance, but does mean that KVM cannot emulate a processor architecture other than the one that the hardware implements. This code assumes that the guest is running paravirtualized using the PAPR (Power Architecture Platform Requirements) interface, which is the interface that IBM's PowerVM hypervisor uses. That means that existing Linux distributions that run on IBM pSeries machines will also run under KVM without modification. In order to communicate the PAPR hypercalls to qemu, this adds a new KVM_EXIT_PAPR_HCALL exit code to include/linux/kvm.h. Currently the choice between book3s_hv support and book3s_pr support (i.e. the existing code, which runs the guest in user mode) has to be made at kernel configuration time, so a given kernel binary can only do one or the other. This new book3s_hv code doesn't support MMIO emulation at present. Since we are running paravirtualized guests, this isn't a serious restriction. With the guest running in supervisor mode, most exceptions go straight to the guest. We will never get data or instruction storage or segment interrupts, alignment interrupts, decrementer interrupts, program interrupts, single-step interrupts, etc., coming to the hypervisor from the guest. Therefore this introduces a new KVMTEST_NONHV macro for the exception entry path so that we don't have to do the KVM test on entry to those exception handlers. We do however get hypervisor decrementer, hypervisor data storage, hypervisor instruction storage, and hypervisor emulation assist interrupts, so we have to handle those. In hypervisor mode, real-mode accesses can access all of RAM, not just a limited amount. Therefore we put all the guest state in the vcpu.arch and use the shadow_vcpu in the PACA only for temporary scratch space. We allocate the vcpu with kzalloc rather than vzalloc, and we don't use anything in the kvmppc_vcpu_book3s struct, so we don't allocate it. We don't have a shared page with the guest, but we still need a kvm_vcpu_arch_shared struct to store the values of various registers, so we include one in the vcpu_arch struct. The POWER7 processor has a restriction that all threads in a core have to be in the same partition. MMU-on kernel code counts as a partition (partition 0), so we have to do a partition switch on every entry to and exit from the guest. At present we require the host and guest to run in single-thread mode because of this hardware restriction. This code allocates a hashed page table for the guest and initializes it with HPTEs for the guest's Virtual Real Memory Area (VRMA). We require that the guest memory is allocated using 16MB huge pages, in order to simplify the low-level memory management. This also means that we can get away without tracking paging activity in the host for now, since huge pages can't be paged or swapped. This also adds a few new exports needed by the book3s_hv code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-08powerpc: implement arch_setup_pdev_archdataKumar Gala
We have a long standing issues with platform devices not have a valid dma_mask pointer. This hasn't been an issue to date as no platform device has tried to set its dma_mask value to a non-default value. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-30powerpc: Add printk companion for ppc_md.progressDave Carroll
This patch adds a printk companion to replace the udbg progress function when initmem is freed. Suggested-by: Milton Miller <miltonm@bga.com> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Carroll <dcarroll@astekcorp.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19powerpc: Fix for Pegasos keyboard and mouseGabriel Paubert
[See http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-October/086424.html and followups. Part of the commit message is directly copied from that.] Commit 540c6c392f01887dcc96bef0a41e63e6c1334f01 tries to find i8042 IRQs in the device-tree but doesn't fall back to the old hardcoded 1 and 12 in all failure cases. Specifically, the case where the device-tree contains nothing matching pnpPNP,303 or pnpPNP,f03 doesn't seem to be handled well. It sort of falls through to the old code, but leaves the IRQs set to 0. Signed-off-by: Gabriel Paubert <paubert@iram.es> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19powerpc: Call no-longer static setup_nr_cpu_ids instead of replicating itMilton Miller
c1854e00727f50f7ac99e98d26ece04c087ef785 (powerpc: Set nr_cpu_ids early and use it to free PACAs) copied the formerly static setup_nr_cpu_ids from init/main.c but 34db18a054c600b6f81787165669dc572fe4de25 (smp: move smp setup functions to kernel/smp.c) moved it to kernel/smp.c with a declaration in include/linux/smp.h, so we can call it instead of replicating it. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19powerpc: Respect nr_cpu_ids when calling set_cpu_possible and set_cpu_presentMilton Miller
We should not set cpus above nr_cpu_ids to possible. While we will trigger a warning with CONFIG_CPUMASK_DEBUG, even then the mask initializers will set the bits beyond what the iterators check and cause nr_cpu_ids to increase. Respecting nr_cpu_ids during setup will allow us to use it in our initial paca allocation. It can be reduced from NR_CPUS by the existing early param nr_cpus=, which was added in 2b633e3fac5efada088b57d31e65401f22bcc18f (smp: Use nr_cpus= to set nr_cpu_ids early). We already call parse_early_parms between finding the command line and allocating the pacas. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-04powerpc: Convert old cpumask API into new oneKOSAKI Motohiro
Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05powerpc: Set nr_cpu_ids early and use it to free PACAsRyan Grimm
Without this, "holes" in the CPU numbering can cause us to free too many PACAs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-06powerpc: fix i8042 module build errorGrant Likely
of_i8042_{kbd,aux}_irq needs to be exported Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-05Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits) of/platform: Register of_platform_drivers with an "of:" prefix of/address: Clean up function declarations of/spi: call of_register_spi_devices() from spi core code of: Provide default of_node_to_nid() implementation. of/device: Make of_device_make_bus_id() usable by other code. of/irq: Fix endian issues in parsing interrupt specifiers of: Fix phandle endian issues of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string of: remove of_default_bus_ids of: make of_find_device_by_node generic microblaze: remove references to of_device and to_of_device sparc: remove references to of_device and to_of_device powerpc: remove references to of_device and to_of_device of/device: Replace of_device with platform_device in includes and core code of/device: Protect against binding of_platform_drivers to non-OF devices of: remove asm/of_device.h of: remove asm/of_platform.h of/platform: remove all of_bus_type and of_platform_bus_type references of: Merge of_platform_bus_type with platform_bus_type drivercore/of: Add OF style matching to platform bus ... Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just some obj-y removals by the devicetree branch, while the microblaze updates added a new file.
2010-08-04Merge commit 'gcl/next' into nextBenjamin Herrenschmidt
2010-07-24of: Merge of_platform_bus_type with platform_bus_typeGrant Likely
of_platform_bus was being used in the same manner as the platform_bus. The only difference being that of_platform_bus devices are generated from data in the device tree, and platform_bus devices are usually statically allocated in platform code. Having them separate causes the problem of device drivers having to be registered twice if it was possible for the same device to appear on either bus. This patch removes of_platform_bus_type and registers all of_platform bus devices and drivers on the platform bus instead. A previous patch made the of_device structure an alias for the platform_device structure, and a shim is used to adapt of_platform_drivers to the platform bus. After all of of_platform_bus drivers are converted to be normal platform drivers, the shim code can be removed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
2010-07-14lmb: rename to memblockYinghai Lu
via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09powerpc: Add i8042 keyboard and mouse irq parsingMartyn Welch
Currently the irqs for the i8042, which historically provides keyboard and mouse (aux) support, is hardwired in the driver rather than parsing the dts. This patch modifies the powerpc legacy IO code to attempt to parse the device tree for this information, failing back to the hardcoded values if it fails. Signed-off-by: Martyn Welch <martyn.welch@ge.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Update some commentsAnton Blanchard
Since the *_map cpumask variants are deprecated, change the comments to instead refer to *_mask. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert /proc/cpuinfo to new cpumask APIAnton Blanchard
Use new cpumask API in /proc/cpuinfo code. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Refactor /proc/cpuinfo codeAnton Blanchard
This separates the per cpu output from the summary output at the end of the file, making it easier to convert to the new cpumask API in a subsequent patch. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-09powerpc: Dynamically allocate pacasMichael Ellerman
On 64-bit kernels we currently have a 512 byte struct paca_struct for each cpu (usually just called "the paca"). Currently they are statically allocated, which means a kernel built for a large number of cpus will waste a lot of space if it's booted on a machine with few cpus. We can avoid that by only allocating the number of pacas we need at boot. However this is complicated by the fact that we need to access the paca before we know how many cpus there are in the system. The solution is to dynamically allocate enough space for NR_CPUS pacas, but then later in boot when we know how many cpus we have, we free any unused pacas. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
2009-10-29percpu: make percpu symbols in powerpc uniqueTejun Heo
This patch updates percpu related symbols in powerpc such that percpu symbols are unique and don't clash with local symbols. This serves two purposes of decreasing the possibility of global percpu symbol collision and allowing dropping per_cpu__ prefix from percpu symbols. * arch/powerpc/kernel/perf_callchain.c: s/callchain/cpu_perf_callchain/ * arch/powerpc/kernel/setup-common.c: s/pvr/cpu_pvr/ * arch/powerpc/platforms/pseries/dtl.c: s/dtl/cpu_dtl/ * arch/powerpc/platforms/cell/interrupt.c: s/iic/cpu_iic/ Partly based on Rusty Russell's "alloc_percpu: rename percpu vars which cause name clashes" patch. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@ozlabs.org
2009-10-28powerpc: Export powerpc_debugfs_rootAnton Blanchard
Kernel modules should be able to place their debug output inside our powerpc debugfs directory. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (39 commits) cpumask: Move deprecated functions to end of header. cpumask: remove unused deprecated functions, avoid accusations of insanity cpumask: use new-style cpumask ops in mm/quicklist. cpumask: use mm_cpumask() wrapper: x86 cpumask: use mm_cpumask() wrapper: um cpumask: use mm_cpumask() wrapper: mips cpumask: use mm_cpumask() wrapper: mn10300 cpumask: use mm_cpumask() wrapper: m32r cpumask: use mm_cpumask() wrapper: arm cpumask: Use accessors for cpu_*_mask: um cpumask: Use accessors for cpu_*_mask: powerpc cpumask: Use accessors for cpu_*_mask: mips cpumask: Use accessors for cpu_*_mask: m32r cpumask: remove arch_send_call_function_ipi cpumask: arch_send_call_function_ipi_mask: s390 cpumask: arch_send_call_function_ipi_mask: powerpc cpumask: arch_send_call_function_ipi_mask: mips cpumask: arch_send_call_function_ipi_mask: m32r cpumask: arch_send_call_function_ipi_mask: alpha cpumask: remove obsolete topology_core_siblings and topology_thread_siblings: ia64 ...
2009-09-23headers: utsname.h reduxAlexey Dobriyan
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24cpumask: Use accessors for cpu_*_mask: powerpcRusty Russell
Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
2009-09-23seq_file: constify seq_operationsJames Morris
Make all seq_operations structs const, to help mitigate against revectoring user-triggerable function pointers. This is derived from the grsecurity patch, although generated from scratch because it's simpler than extracting the changes from there. Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07powerpc: Remove duplicated #include'sHuang Weiyi
Remove duplicated #include's in - arch/powerpc/include/asm/ps3fb.h - arch/powerpc/kernel/setup-common.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-03-24powerpc: setup default archdata for {of_}platform via bus_register_notifierKumar Gala
Since a number of powerpc chips are SoCs we end up having dma-able devices that are registered as platform or of_platform devices. We need to hook the archdata to setup proper dma_ops for these devices. Rather than having to add a bus_notify to each platform we add a default one at the highest priority (called first) to set the default dma_ops for of_platform and platform devices to dma_direct_ops. This allows platform code to override the ops by providing their own notifier call back. In the future to enable >4G DMA support on ppc32 we can hook swiotlb ops. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-22powerpc: Move memory size print into common show_cpuinfo for 32-bitBecky Bruce
Most of the platforms were printing the size of the memory in their show_cpuinfo implementations. This moves that to the common show_cpuinfo, so that all 32-bit platforms will now print the size of memory. I also update the code to deal with the fact that total_memory is now a phys_addr_t. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-09-15powerpc: Fix major revision number for Freescale coresMartin Langer
Some 74xx cores by Freescale are using the configuration field instead of the major revision field for their revision number. This corrects the wrong behaviour for those ppc cores including my one. There is a reference document at Freecale. It describes the PVR register. This is based on that pdf. You can find the document at: http://www.freescale.com/files/archives/doc/support_info/PPCPVR.pdf Signed-off-by: Martin Langer <martin-langer@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-28powerpc: Update cpu_sibling_maps dynamicallyNathan Lynch
Rather doing one initialization pass over all the per-cpu cpu_sibling_maps at boot, update the maps at cpu online/offline time. This is a behavior change -- the thread_siblings attribute now reflects only online siblings, whereas it would display offline siblings before. The new behavior matches that of x86, and is arguably more useful. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-06-09powerpc: Add the PC speaker only when requestedEmil Medve
This eliminates this minor boot-time debugging error message: [ 1.316451] calling add_pcspkr+0x0/0x84 [ 1.316478] initcall add_pcspkr+0x0/0x84 returned -19 after 0 msecs Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26[POWERPC] Add 'model: ...' line to common show_cpuinfo()Marian Balakowicz
Print out 'model' property of '/' node as a machine name in generic show_cpuinfo() routine. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-13[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-03[POWERPC] Cleanup SMT thread handlingBenjamin Herrenschmidt
This cleans up the SMT thread handling, removing some hard coded assumptions and providing a set of helpers to convert between linux cpu numbers, thread numbers and cores. This implementation requires the number of threads per core to be a power of 2 and identical on all cores in the system, but it's an implementation detail, not an API requirement and so this limitation can be lifted in the future if anybody ever needs it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-16Convert cpu_sibling_map to be a per cpu variableMike Travis
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19[POWERPC] Remove cmd_line from head*.SStephen Rothwell
It is just a C char array, so declare it thusly. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26[POWERPC] Fix Pegasos keyboard detectionAlan Curry
As of 2.6.22 the kernel doesn't recognize the i8042 keyboard/mouse controller on the PegasosPPC. This is because of a feature/bug in the OF device tree: the "device_type" attribute is an empty string instead of "8042" as the kernel expects. This adds a secondary detection which looks for a device whose *name* is "8042" if there is no device whose *type* is "8042". Signed-off-by: Alan Curry <pacman@world.std.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] Make the debugfs "powerpc" dir globally accessibleMichael Ellerman
The prom.c debugging code creates a "powerpc" directory in debugfs, which is nice, but doesn't allow any other debugging code to stick things under "powerpc" in debugfs. So make it global. While we're there we should make the prom.c debugging code depend on CONFIG_DEBUG_FS, because it doesn't work otherwise. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10[POWERPC] Add a check for keyboard/mouse device nodes in check_legacy_ioport()Wade Farnsworth
The device tree for the MPC8641 HPCN does not implement the device type property for I8042 nodes. In addition to checking the I8042 node's device type, also match the keyboard and/or mouse nodes' compatible property. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-12[POWERPC] Check cache coherency of kernel vs firmwareDale Farnsworth
check_cache_coherency() verifies that the cache coherency setting of the kernel (CONFIG_NOT_COHERENT_CACHE) matches that left by the firmware, as indicated by coherency-off device tree property. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27[POWERPC] Generic check_legacy_ioportOlaf Hering
check_legacy_ioport makes only sense on PREP, CHRP and pSeries. They may have an isa node with PS/2, parport, floppy and serial ports. Remove the check_legacy_ioport call from ppc_md, it's not needed anymore. Hardware capabilities come from the device-tree. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename prom_n_size_cells to of_n_size_cellsStephen Rothwell
This is more consistent and gets us closer to the Sparc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename prom_n_addr_cells to of_n_addr_cellsStephen Rothwell
This is more consistent and gets us closer to the Sparc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Remove unused inclusion of linux/ide.hOlaf Hering
Remove unneeded inclusion of linux/ide.h It does not compile with CONFIG_BLOCK=n. Remove asm/ide.h from ksyms file, it gets included earlier via linux/ide.h. Compile tested with all defconfig files. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>