summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/tm.S
AgeCommit message (Collapse)Author
2014-04-07powerpc/tm: Disable IRQ in tm_recheckpointMichael Neuling
We can't take an IRQ when we're about to do a trechkpt as our GPR state is set to user GPR values. We've hit this when running some IBM Java stress tests in the lab resulting in the following dump: cpu 0x3f: Vector: 700 (Program Check) at [c000000007eb3d40] pc: c000000000050074: restore_gprs+0xc0/0x148 lr: 00000000b52a8184 sp: ac57d360 msr: 8000000100201030 current = 0xc00000002c500000 paca = 0xc000000007dbfc00 softe: 0 irq_happened: 0x00 pid = 34535, comm = Pooled Thread # R00 = 00000000b52a8184 R16 = 00000000b3e48fda R01 = 00000000ac57d360 R17 = 00000000ade79bd8 R02 = 00000000ac586930 R18 = 000000000fac9bcc R03 = 00000000ade60000 R19 = 00000000ac57f930 R04 = 00000000f6624918 R20 = 00000000ade79be8 R05 = 00000000f663f238 R21 = 00000000ac218a54 R06 = 0000000000000002 R22 = 000000000f956280 R07 = 0000000000000008 R23 = 000000000000007e R08 = 000000000000000a R24 = 000000000000000c R09 = 00000000b6e69160 R25 = 00000000b424cf00 R10 = 0000000000000181 R26 = 00000000f66256d4 R11 = 000000000f365ec0 R27 = 00000000b6fdcdd0 R12 = 00000000f66400f0 R28 = 0000000000000001 R13 = 00000000ada71900 R29 = 00000000ade5a300 R14 = 00000000ac2185a8 R30 = 00000000f663f238 R15 = 0000000000000004 R31 = 00000000f6624918 pc = c000000000050074 restore_gprs+0xc0/0x148 cfar= c00000000004fe28 dont_restore_vec+0x1c/0x1a4 lr = 00000000b52a8184 msr = 8000000100201030 cr = 24804888 ctr = 0000000000000000 xer = 0000000000000000 trap = 700 This moves tm_recheckpoint to a C function and moves the tm_restore_sprs into that function. It then adds IRQ disabling over the trechkpt critical section. It also sets the TEXASR FS in the signals code to ensure this is never set now that we explictly write the TM sprs in tm_recheckpoint. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: stable@vger.kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-30powerpc: Use 32 bit loads and stores when operating on condition register valuesAnton Blanchard
The condition register (CR) is a 32 bit quantity so we should use 32 bit loads and stores. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-11powerpc: Put FP/VSX and VR state into structuresPaul Mackerras
This creates new 'thread_fp_state' and 'thread_vr_state' structures to store FP/VSX state (including FPSCR) and Altivec/VSX state (including VSCR), and uses them in the thread_struct. In the thread_fp_state, the FPRs and VSRs are represented as u64 rather than double, since we rarely perform floating-point computations on the values, and this will enable the structures to be used in KVM code as well. Similarly FPSCR is now a u64 rather than a structure of two 32-bit values. This takes the offsets out of the macros such as SAVE_32FPRS, REST_32FPRS, etc. This enables the same macros to be used for normal and transactional state, enabling us to delete the transactional versions of the macros. This also removes the unused do_load_up_fpu and do_load_up_altivec, which were in fact buggy since they didn't create large enough stack frames to account for the fact that load_up_fpu and load_up_altivec are not designed to be called from C and assume that their caller's stack frame is an interrupt frame. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-03powerpc/tm: Switch out userspace PPR and DSCR soonerMichael Neuling
When we do a treclaim or trecheckpoint we end up running with userspace PPR and DSCR values. Currently we don't do anything special to avoid running with user values which could cause a severe performance degradation. This patch moves the PPR and DSCR save and restore around treclaim and trecheckpoint so that we run with user values for a much shorter period. More care is taken with the PPR as it's impact is greater than the DSCR. This is similar to user exceptions, where we run HTM_MEDIUM early to ensure that we don't run with a userspace PPR values in the kernel. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-10-03powerpc/tm: Turn interrupts hard off in tm_reclaim()Michael Neuling
We can't take IRQs in tm_reclaim as we might have a bogus r13 and r1. This turns IRQs hard off in this function. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-27Merge branch 'merge' into nextBenjamin Herrenschmidt
Merge stuff that already went into Linus via "merge" which are pre-reqs for subsequent patches
2013-08-14powerpc: Fix VRSAVE handlingPaul Mackerras
Since 2002, the kernel has not saved VRSAVE on exception entry and restored it on exit; rather, VRSAVE gets context-switched in _switch. This means that when executing in process context in the kernel, the userspace VRSAVE value is live in the VRSAVE register. However, the signal code assumes that current->thread.vrsave holds the current VRSAVE value, which is incorrect. Therefore, this commit changes it to use the actual VRSAVE register instead. (It still uses current->thread.vrsave as a temporary location to store it in, as __get_user and __put_user can only transfer to/from a variable, not an SPR.) This also modifies the transactional memory code to save and restore VRSAVE regardless of whether VMX is enabled in the MSR. This is because accesses to VRSAVE are not controlled by the MSR.VEC bit, but can happen at any time. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-09powerpc/tm: Fix context switching TAR, PPR and DSCR SPRsMichael Neuling
If a transaction is rolled back, the Target Address Register (TAR), Processor Priority Register (PPR) and Data Stream Control Register (DSCR) should be restored to the checkpointed values before the transaction began. Any changes to these SPRs inside the transaction should not be visible in the abort handler. Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR. If we preempt a processes inside a transaction which has modified any of these, on process restore, that same transaction may be aborted we but we won't see the checkpointed versions of these SPRs. This adds checkpointed versions of these SPRs to the thread_struct and adds the save/restore of these three SPRs to the treclaim/trechkpt code. Without this if any of these SPRs are modified during a transaction, users may incorrectly see a speculated SPR value even if the transaction is aborted. Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: <stable@vger.kernel.org> [v3.10] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-30powerpc/tm: Clear MSR RI in non-recoverable TM codeMichael Neuling
When we treclaim and trecheckpoint there's an unavoidable period when r1 will not be a valid kernel stack pointer. This patch clears the MSR recoverable interrupt (RI) bit over these regions to indicate we have an invalid kernel stack pointer. For treclaim, the region over which we clear MSR RI is larger than required to avoid the need for an extra costly mtmsrd. Thanks to Paulus for suggesting this change. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-10powerpc: fix compiling CONFIG_PPC_TRANSACTIONAL_MEM when CONFIG_ALTIVEC=nMichael Neuling
We can't compile a kernel with CONFIG_ALTIVEC=n when CONFIG_PPC_TRANSACTIONAL_MEM=y. We currently get: arch/powerpc/kernel/tm.S:320: Error: unsupported relocation against THREAD_VSCR arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0 arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0 etc. The below fixes this with a sprinkling of #ifdefs. This was found by mpe with kisskb: http://kisskb.ellerman.id.au/kisskb/buildresult/8539442/ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-02-15powerpc: Add helper functions for transactional memory context switchingMichael Neuling
Here we add the helper functions to be used when context switching. These allow us to fully reclaim and recheckpoint a transaction. We introduce a new paca field called tm_scratch to help us store away register values when doing the low level tm reclaim register save. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>