summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel
AgeCommit message (Collapse)Author
2015-02-21Merge tag 'clk-for-linus-3.20' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock framework updates from Mike Turquette: "The clock framework changes contain the usual driver additions, enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based devices. Additionally the framework core underwent a bit of surgery with two major changes: - The boundary between the clock core and clock providers (e.g clock drivers) is now more well defined with dedicated provider helper functions. struct clk no longer maps 1:1 with the hardware clock but is a true per-user cookie which helps us tracker users of hardware clocks and debug bad behavior. - The addition of rate constraints for clocks. Rate ranges are now supported which are analogous to the voltage ranges in the regulator framework. Unfortunately these changes to the core created some breakeage. We think we fixed it all up but for this reason there are lots of last minute commits trying to undo the damage" * tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits) clk: Only recalculate the rate if needed Revert "clk: mxs: Fix invalid 32-bit access to frac registers" clk: qoriq: Add support for the platform PLL powerpc/corenet: Enable CLK_QORIQ clk: Replace explicit clk assignment with __clk_hw_set_clk clk: Add __clk_hw_set_clk helper function clk: Don't dereference parent clock if is NULL MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr clkdev: Always allocate a struct clk and call __clk_get() w/ CCF clk: shmobile: div6: Avoid division by zero in .round_rate() clk: mxs: Fix invalid 32-bit access to frac registers clk: omap: compile legacy omap3 clocks conditionally clkdev: Export clk_register_clkdev clk: Add rate constraints to clocks clk: remove clk-private.h pci: xgene: do not use clk-private.h arm: omap2+ remove dead clock code clk: Make clk API return per-user struct clk instances clk: tegra: Define PLLD_DSI and remove dsia(b)_mux clk: tegra: Add support for the Tegra132 CAR IP block ...
2015-02-17kexec: add IND_FLAGS macroGeoff Levand
Add a new kexec preprocessor macro IND_FLAGS, which is the bitwise OR of all the possible kexec IND_ kimage_entry indirection flags. Having this macro allows for simplified code in the prosessing of the kexec kimage_entry items. Also, remove the local powerpc definition and use the generic one. Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Maximilian Attems <max@stro.at> Cc: Michal Marek <mmarek@suse.cz> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13powerpc: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * Spurious if (len > 1) test dropped from shared_cpu_map_show(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12powerpc: add running_clock for powerpc to prevent spurious softlockup warningsCyril Bur
On POWER8 virtualised kernels the VTB register can be read to have a view of time that only increases while the guest is running. This will prevent guests from seeing time jump if a guest is paused for significant amounts of time. On POWER7 and below virtualised kernels stolen time is subtracted from local_clock as a best effort approximation. This will not eliminate spurious warnings in the case of a suspended guest but may reduce the occurance in the case of softlockups due to host over commit. Bare metal kernels should avoid reading the VTB as KVM does not restore sane values when not executing, the approxmation is fine as host kernels won't observe any stolen time. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Jones <drjones@redhat.com> Acked-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: chai wen <chaiw.fnst@cn.fujitsu.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Ben Zhang <benzh@chromium.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12all arches, signal: move restart_block to struct task_structAndy Lutomirski
If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11Merge tag 'powerpc-3.20-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Update of all defconfigs - Addition of a bunch of config options to modernise our defconfigs - Some PS3 updates from Geoff - Optimised memcmp for 64 bit from Anton - Fix for kprobes that allows 'perf probe' to work from Naveen - Several cxl updates from Ian & Ryan - Expanded support for the '24x7' PMU from Cody & Sukadev - Freescale updates from Scott: "Highlights include 8xx optimizations, some more work on datapath device tree content, e300 machine check support, t1040 corenet error reporting, and various cleanups and fixes" * tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits) cxl: Add missing return statement after handling AFU errror cxl: Fail AFU initialisation if an invalid configuration record is found cxl: Export optional AFU configuration record in sysfs powerpc/mm: Warn on flushing tlb page in kernel context powerpc/powernv: Add OPAL soft-poweroff routine powerpc/perf/hv-24x7: Document sysfs event description entries powerpc/perf/hv-gpci: add the remaining gpci requests powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated powerpc/perf/hv-24x7: parse catalog and populate sysfs with events perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper perf: add PMU_EVENT_ATTR_STRING() helper perf: provide sysfs_show for struct perf_pmu_events_attr powerpc/kernel: Avoid initializing device-tree pointer twice powerpc: Remove old compile time disabled syscall tracing code powerpc/kernel: Make syscall_exit a local label cxl: Fix device_node reference counting powerpc/mm: bail out early when flushing TLB page powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80) perf/powerpc: reset event hw state when adding it to the PMU powerpc/qe: Use strlcpy() ...
2015-02-04Merge branch 'next' of ↵Michael Ellerman
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next Freescale updates from Scott: "Highlights include 8xx optimizations, some more work on datapath device tree content, e300 machine check support, t1040 corenet error reporting, and various cleanups and fixes."
2015-02-02Merge branch 'clk-next' into v3.19-rc7Michael Turquette
2015-02-02powerpc/kernel: Avoid initializing device-tree pointer twiceGavin Shan
As commit 50ba08f3 ("of/fdt: Don't clear initial_boot_params if fdt_check_header() fails") does, the device-tree pointer "initial_boot_params" is initialized by early_init_dt_verify(), which is called by early_init_devtree(). So we needn't explicitly initialize that again in early_init_devtree(). Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-02powerpc: Remove old compile time disabled syscall tracing codeMichael Ellerman
We have code to do syscall tracing which is disabled at compile time by default. It's not been touched since the dawn of time (ie. v2.6.12). There are now better ways to do syscall tracing, ie. using the raw_syscall, or syscall tracepoints. For the specific case of tracing syscalls at boot on a system that doesn't get to userspace, you can boot with: trace_event=syscalls tp_printk=on Which will trace syscalls from boot, and echo all output to the console. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-02powerpc/kernel: Make syscall_exit a local labelMichael Ellerman
Currently when we back trace something that is in a syscall we see something like this: [c000000000000000] [c000000000000000] SyS_read+0x6c/0x110 [c000000000000000] [c000000000000000] syscall_exit+0x0/0x98 Although it's entirely correct, seeing syscall_exit at the bottom can be confusing - we were exiting from a syscall and then called SyS_read() ? If we instead change syscall_exit to be a local label we get something more intuitive: [c0000001fa46fde0] [c00000000026719c] SyS_read+0x6c/0x110 [c0000001fa46fe30] [c000000000009264] system_call+0x38/0xd0 ie. we were handling a system call, and it was SyS_read(). Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-29powerpc: Add machine_check cpu function for e300c3 cpusEsben Haabendal
Signed-off-by: Esben Haabendal <eha@deif.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/8xx: Remove duplicated code in set_context()LEROY Christophe
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/8xx: Optimise access to swapper_pg_dirLEROY Christophe
All accessed to PGD entries are done via 0(r11). By using lower part of swapper_pg_dir as load index to r11, we can remove the ori instruction. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/8xx: Take benefit of aligned PGDIRLEROY Christophe
L1 base address is now aligned so we can insert L1 index into r11 directly and then preserve r10 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/8xx: remove tests on PGDIR entry validityLEROY Christophe
Kernel MMU handling code handles validity of entries via _PMD_PRESENT which corresponds to V bit in MD_TWC and MI_TWC. When the V bit is not set, MPC8xx triggers TLBError exception. So we don't have to check that and branch ourself to TLBError. We can set TLB entries with non present entries, remove all those tests and let the 8xx handle it. This reduce the number of cycle when the entries are valid which is the case most of the time, and doesn't significantly increase the time for handling invalid entries. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/8xx: remove remaining unnecessary code in FixupDARLEROY Christophe
Since commit 33fb845a6f01 ("powerpc/8xx: Don't use MD_TWC for walk"), MD_EPN and MD_TWC are not writen anymore in FixupDAR so saving r3 has become useless. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/8xx: use _PAGE_RO instead of _PAGE_RWLEROY Christophe
On powerpc 8xx, in TLB entries, 0x400 bit is set to 1 for read-only pages and is set to 0 for RW pages. So we should use _PAGE_RO instead of _PAGE_RW Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-28powerpc: Remove some unused functionsMichael Ellerman
Remove slice_set_psize() which is not used. It was added in 3a8247cc2c85 "powerpc: Only demote individual slices rather than whole process" but was never used. Remove vsx_assist_exception() which is not used. It was added in ce48b2100785 "powerpc: Add VSX context save/restore, ptrace and signal support" but was never used. Remove generic_mach_cpu_die() which is not used. Its last caller was removed in 375f561a4131 "powerpc/powernv: Always go into nap mode when CPU is offline". Remove mpc7448_hpc2_power_off() and mpc7448_hpc2_halt() which are unused. These were introduced in c5d56332fd6c "[POWERPC] Add general support for mpc7448hpc2 (Taiga) platform" but were never used. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> [mpe: Update changelog with details on when/why they are unused] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-27powerpc/pseries: Fix endian problems with LE migrationCyril Bur
RTAS events require arguments be passed in big endian while hypercalls have their arguments passed in registers and the values should therefore be in CPU endian. The "ibm,suspend_me" 'RTAS' call makes a sequence of hypercalls to setup one true RTAS call. This means that "ibm,suspend_me" is handled specially in the ppc_rtas() syscall. The ppc_rtas() syscall has its arguments in big endian and can therefore pass these arguments directly to the RTAS call. "ibm,suspend_me" is handled specially from within ppc_rtas() (by calling rtas_ibm_suspend_me()) which has left an endian bug on little endian systems due to the requirement of hypercalls. The return value from rtas_ibm_suspend_me() gets returned in cpu endian, and is left unconverted, also a bug on little endian systems. rtas_ibm_suspend_me() does not actually make use of the rtas_args that it is passed. This patch removes the convoluted use of the rtas_args struct to pass params to rtas_ibm_suspend_me() in favour of passing what it needs as actual arguments. This patch also ensures the two callers of rtas_ibm_suspend_me() pass function parameters in cpu endian and in the case of ppc_rtas(), converts the return value. migrate_store() (the other caller of rtas_ibm_suspend_me()) is from a sysfs file which deals with everything in cpu endian so this function only underwent cleanup. This patch has been tested with KVM both LE and BE and on PowerVM both LE and BE. Under QEMU/KVM the migration happens without touching these code pathes. For PowerVM there is no obvious regression on BE and the LE code path now provides the correct parameters to the hypervisor. Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-24Merge tag 'pci-v3.19-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for: - a resource management problem that causes a Radeon "Fatal error during GPU init" on machines where the BIOS programmed an invalid Root Port window. This was a regression in v3.16. - an Atheros AR93xx device that doesn't handle PCI bus resets correctly. This was a regression in v3.14. - an out-of-date email address" * tag 'pci-v3.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Richard Zhu's email address sparc/PCI: Clip bridge windows to fit in upstream windows powerpc/PCI: Clip bridge windows to fit in upstream windows parisc/PCI: Clip bridge windows to fit in upstream windows mn10300/PCI: Clip bridge windows to fit in upstream windows microblaze/PCI: Clip bridge windows to fit in upstream windows ia64/PCI: Clip bridge windows to fit in upstream windows frv/PCI: Clip bridge windows to fit in upstream windows alpha/PCI: Clip bridge windows to fit in upstream windows x86/PCI: Clip bridge windows to fit in upstream windows PCI: Add pci_claim_bridge_resource() to clip window if necessary PCI: Add pci_bus_clip_resource() to clip to fit upstream window PCI: Pass bridge device, not bus, when updating bridge windows PCI: Mark Atheros AR93xx to avoid bus reset PCI: Add flag for devices where we can't use bus reset
2015-01-23powerpc/eeh: Allow to set maximal frozen timesGavin Shan
When PE's frozen count hits maximal allowed frozen times, which is 5 currently, it will be forced to be offline permanently. Once the PE is removed permanently, rebooting machine is required to bring the PE back. It's not convienent when testing EEH functionality. The patch exports the maximal allowed frozen times through debugfs entry (/sys/kernel/debug/powerpc/eeh_max_freezes). Requested-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/eeh: Introduce flag EEH_PE_REMOVEDGavin Shan
The conditions that one specific PE's frozen count exceeds the maximal allowed times (EEH_MAX_ALLOWED_FREEZES) and it's in isolated or recovery state indicate the PE was removed permanently implicitly. The patch introduces flag EEH_PE_REMOVED to indicate that explicitly so that we don't depend on the fixed maximal allowed times, which can be varied as we do in subsequent patch. Flag EEH_PE_REMOVED is expected to be marked for the PE whose frozen count exceeds the maximal allowed times, or just failed from recovery. Requested-by: Ryan Grimm <grimm@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/eeh: Fix missed PE#0 on P7IOCGavin Shan
PE#0 should be regarded as valid for P7IOC, while it's invalid for PHB3. The patch adds flag EEH_VALID_PE_ZERO to differentiate those two cases. Without the patch, we possibly see frozen PE#0 state is cleared without EEH recovery taken on P7IOC as following kernel logs indicate: [root@ltcfbl8eb ~]# dmesg : pci 0000:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0000:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0001:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0001:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0002:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0002:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0003:00 : [PE# 000] Secondary bus 0 associated with PE#0 pci 0003:01 : [PE# 001] Secondary bus 1 associated with PE#1 pci 0003:20 : [PE# 002] Secondary bus 32..63 associated with PE#2 : EEH: Clear non-existing PHB#3-PE#0 EEH: PHB location: U78AE.001.WZS00M9-P1-002 Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/kernel: Avoid memory corruption at early stageGavin Shan
When calling to early_setup(), we pick "boot_paca" up for the master CPU and initialize that with initialise_paca(). At that point, the SLB shadow buffer isn't populated yet. Updating the SLB shadow buffer should corrupt what we had in physical address 0 where the trap instruction is usually stored. This hasn't been observed to cause any trouble in practice, but is obviously fishy. Fixes: 6f4441ef7009 ("powerpc: Dynamically allocate slb_shadow from memblock") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc: Rename _TIF_SYSCALL_T_OR_A to _TIF_SYSCALL_DOTRACEMichael Ellerman
Once upon a time, at least 9 years ago (< 2.6.12), _TIF_SYSCALL_T_OR_A meant "TRACE or AUDIT". But these days it means TRACE or AUDIT or SECCOMP or TRACEPOINT or NOHZ. All of those are implemented via syscall_dotrace() so rename the flag to that to try and clarify things. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-23powerpc/pci: remove the multi-init for pci_dn->phbWei Yang
pci_dn->phb is set to phb in update_dn_pci_info(), if succeed. This patch removes the duplication of pci_dn->phb initialization. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20powerpc: call of_clk_init() from time_init()Kevin Hao
So the boards which has COMMON_CLK enabled don't have to invoke this in its board specific file. Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-16powerpc/PCI: Clip bridge windows to fit in upstream windowsYinghai Lu
Every PCI-PCI bridge window should fit inside an upstream bridge window because orphaned address space is unreachable from the primary side of the upstream bridge. If we inherit invalid bridge windows that overlap an upstream window from firmware, clip them to fit and update the bridge accordingly. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Gavin Shan <gwshan@linux.vnet.ibm.com> CC: Anton Blanchard <anton@samba.org> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: Wei Yang <weiyang@linux.vnet.ibm.com> CC: Andrew Murray <amurray@embedded-bits.co.uk> CC: linuxppc-dev@lists.ozlabs.org
2014-12-29Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active ↵Michael Ellerman
and online" This reverts commit 7c5c92ed56d932b2c19c3f8aea86369509407d33. Although this did fix the bug it was aimed at, it also broke secondary startup on platforms that use give/take_timebase(). Unfortunately we didn't detect that while it was in next. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29powerpc/kvm: Create proper names for the kvm_host_state PMU fieldsMichael Ellerman
We have two arrays in kvm_host_state that contain register values for the PMU. Currently we only create an asm-offsets symbol for the base of the arrays, and do the array offset in the assembly code. Creating an asm-offsets symbol for each field individually makes the code much nicer to read, particularly for the MMCRx/SIxR/SDAR fields, and might have helped us notice the recent double restore bug we had in this code. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Alexander Graf <agraf@suse.de>
2014-12-29powerpc/kdump: Ignore failure in enabling big endian exception during crashHari Bathini
In LE kernel, we currently have a hack for kexec that resets the exception endian before starting a new kernel as the kernel that is loaded could be a big endian or a little endian kernel. In kdump case, resetting exception endian fails when one or more cpus is disabled. But we can ignore the failure and still go ahead, as in most cases crashkernel will be of same endianess as primary kernel and reseting endianess is not even needed in those cases. This patch adds a new inline function to say if this is kdump path. This function is used at places where such a check is needed. Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> [mpe: Rename to kdump_in_progress(), use bool, and edit comment] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-19Merge tag 'powerpc-3.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull second batch of powerpc updates from Michael Ellerman: "The highlight is the series that reworks the idle management on powernv, which allows us to use deeper idle states on those machines. There's the fix from Anton for the "BUG at kernel/smpboot.c:134!" problem. An i2c driver for powernv. This is acked by Wolfram Sang, and he asked that we take it through the powerpc tree. A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of the audit maintainers. A patch from Ben to export the symbol map of our OPAL firmware as a sysfs file, so that tools can use it. Also some CXL fixes, a couple of powerpc perf fixes, a fix for smt-enabled, and the patch to add __force to get_user() so we can use bitwise types" * tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Ignore smt-enabled on Power8 and later powerpc/uaccess: Allow get_user() with bitwise types powerpc/powernv: Expose OPAL firmware symbol map powernv/powerpc: Add winkle support for offline cpus powernv/cpuidle: Redesign idle states management powerpc/powernv: Enable Offline CPUs to enter deep idle states powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode i2c: Driver to expose PowerNV platform i2c busses powerpc: add little endian flag to syscall_get_arch() power/perf/hv-24x7: Use kmem_cache_free() instead of kfree powerpc/perf/hv-24x7: Use per-cpu page buffer cxl: Unmap MMIO regions when detaching a context cxl: Add timeout to process element commands cxl: Change contexts_lock to a mutex to fix sleep while atomic bug powerpc: Secondary CPUs must set cpu_callin_map after setting active and online
2014-12-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM update from Paolo Bonzini: "3.19 changes for KVM: - spring cleaning: removed support for IA64, and for hardware- assisted virtualization on the PPC970 - ARM, PPC, s390 all had only small fixes For x86: - small performance improvements (though only on weird guests) - usual round of hardware-compliancy fixes from Nadav - APICv fixes - XSAVES support for hosts and guests. XSAVES hosts were broken because the (non-KVM) XSAVES patches inadvertently changed the KVM userspace ABI whenever XSAVES was enabled; hence, this part is going to stable. Guest support is just a matter of exposing the feature and CPUID leaves support" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (179 commits) KVM: move APIC types to arch/x86/ KVM: PPC: Book3S: Enable in-kernel XICS emulation by default KVM: PPC: Book3S HV: Improve H_CONFER implementation KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR register KVM: PPC: Book3S HV: Remove code for PPC970 processors KVM: PPC: Book3S HV: Tracepoints for KVM HV guest interactions KVM: PPC: Book3S HV: Simplify locking around stolen time calculations arch: powerpc: kvm: book3s_paired_singles.c: Remove unused function arch: powerpc: kvm: book3s_pr.c: Remove unused function arch: powerpc: kvm: book3s.c: Remove some unused functions arch: powerpc: kvm: book3s_32_mmu.c: Remove unused function KVM: PPC: Book3S HV: Check wait conditions before sleeping in kvmppc_vcore_blocked KVM: PPC: Book3S HV: ptes are big endian KVM: PPC: Book3S HV: Fix inaccuracies in ICP emulation for H_IPI KVM: PPC: Book3S HV: Fix KSM memory corruption KVM: PPC: Book3S HV: Fix an issue where guest is paused on receiving HMI KVM: PPC: Book3S HV: Fix computation of tlbie operand KVM: PPC: Book3S HV: Add missing HPTE unlock KVM: PPC: BookE: Improve irq inject tracepoint arm/arm64: KVM: Require in-kernel vgic for the arch timers ...
2014-12-17KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR registerPaul Mackerras
There are two ways in which a guest instruction can be obtained from the guest in the guest exit code in book3s_hv_rmhandlers.S. If the exit was caused by a Hypervisor Emulation interrupt (i.e. an illegal instruction), the offending instruction is in the HEIR register (Hypervisor Emulation Instruction Register). If the exit was caused by a load or store to an emulated MMIO device, we load the instruction from the guest by turning data relocation on and loading the instruction with an lwz instruction. Unfortunately, in the case where the guest has opposite endianness to the host, these two methods give results of different endianness, but both get put into vcpu->arch.last_inst. The HEIR value has been loaded using guest endianness, whereas the lwz will load the instruction using host endianness. The rest of the code that uses vcpu->arch.last_inst assumes it was loaded using host endianness. To fix this, we define a new vcpu field to store the HEIR value. Then, in kvmppc_handle_exit_hv(), we transfer the value from this new field to vcpu->arch.last_inst, doing a byte-swap if the guest and host endianness differ. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-12-17KVM: PPC: Book3S HV: Remove code for PPC970 processorsPaul Mackerras
This removes the code that was added to enable HV KVM to work on PPC970 processors. The PPC970 is an old CPU that doesn't support virtualizing guest memory. Removing PPC970 support also lets us remove the code for allocating and managing contiguous real-mode areas, the code for the !kvm->arch.using_mmu_notifiers case, the code for pinning pages of guest memory when first accessed and keeping track of which pages have been pinned, and the code for handling H_ENTER hypercalls in virtual mode. Book3S HV KVM is now supported only on POWER7 and POWER8 processors. The KVM_CAP_PPC_RMA capability now always returns 0. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-15powernv/powerpc: Add winkle support for offline cpusShreyas B. Prabhu
Winkle is a deep idle state supported in power8 chips. A core enters winkle when all the threads of the core enter winkle. In this state power supply to the entire chiplet i.e core, private L2 and private L3 is turned off. As a result it gives higher powersavings compared to sleep. But entering winkle results in a total hypervisor state loss. Hence the hypervisor context has to be preserved before entering winkle and restored upon wake up. Power-on Reset Engine (PORE) is a dedicated engine which is responsible for powering on the chiplet during wake up. It can be programmed to restore the register contests of a few specific registers. This patch uses PORE to restore register state wherever possible and uses stack to save and restore rest of the necessary registers. With hypervisor state restore things fall under three categories- per-core state, per-subcore state and per-thread state. To manage this, extend the infrastructure introduced for sleep. Mainly we add a paca variable subcore_sibling_mask. Using this and the core_idle_state we can distingush first thread in core and subcore. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-15powernv/cpuidle: Redesign idle states managementShreyas B. Prabhu
Deep idle states like sleep and winkle are per core idle states. A core enters these states only when all the threads enter either the particular idle state or a deeper one. There are tasks like fastsleep hardware bug workaround and hypervisor core state save which have to be done only by the last thread of the core entering deep idle state and similarly tasks like timebase resync, hypervisor core register restore that have to be done only by the first thread waking up from these state. The current idle state management does not have a way to distinguish the first/last thread of the core waking/entering idle states. Tasks like timebase resync are done for all the threads. This is not only is suboptimal, but can cause functionality issues when subcores and kvm is involved. This patch adds the necessary infrastructure to track idle states of threads in a per-core structure. It uses this info to perform tasks like fastsleep workaround and timebase resync only once per core. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Originally-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-15powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle modePaul Mackerras
Currently, when going idle, we set the flag indicating that we are in nap mode (paca->kvm_hstate.hwthread_state) and then execute the nap (or sleep or rvwinkle) instruction, all with the MMU on. This is bad for two reasons: (a) the architecture specifies that those instructions must be executed with the MMU off, and in fact with only the SF, HV, ME and possibly RI bits set, and (b) this introduces a race, because as soon as we set the flag, another thread can switch the MMU to a guest context. If the race is lost, this thread will typically start looping on relocation-on ISIs at 0xc...4400. This fixes it by setting the MSR as required by the architecture before setting the flag or executing the nap/sleep/rvwinkle instruction. Cc: stable@vger.kernel.org [ shreyas@linux.vnet.ibm.com: Edited to handle LE ] Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-11Merge tag 'powerpc-3.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Some nice cleanups like removing bootmem, and removal of __get_cpu_var(). There is one patch to mm/gup.c. This is the generic GUP implementation, but is only used by us and arm(64). We have an ack from Steve Capper, and although we didn't get an ack from Andrew he told us to take the patch through the powerpc tree. There's one cxl patch. This is in drivers/misc, but Greg said he was happy for us to manage fixes for it. There is an infrastructure patch to support an IPMI driver for OPAL. There is also an RTC driver for OPAL. We weren't able to get any response from the RTC maintainer, Alessandro Zummo, so in the end we just merged the driver. The usual batch of Freescale updates from Scott" * tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits) powerpc/powernv: Return to cpu offline loop when finished in KVM guest powerpc/book3s: Fix partial invalidation of TLBs in MCE code. powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault powerpc/xmon: Cleanup the breakpoint flags powerpc/xmon: Enable HW instruction breakpoint on POWER8 powerpc/mm/thp: Use tlbiel if possible powerpc/mm/thp: Remove code duplication powerpc/mm/hugetlb: Sanity check gigantic hugepage count powerpc/oprofile: Disable pagefaults during user stack read powerpc/mm: Check for matching hpte without taking hpte lock powerpc: Drop useless warning in eeh_init() powerpc/powernv: Cleanup unused MCE definitions/declarations. powerpc/eeh: Dump PHB diag-data early powerpc/eeh: Recover EEH error on ownership change for BCM5719 powerpc/eeh: Set EEH_PE_RESET on PE reset powerpc/eeh: Refactor eeh_reset_pe() powerpc: Remove more traces of bootmem powerpc/pseries: Initialise nvram_pstore_info's buf_lock cxl: Name interrupts in /proc/interrupt cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning ...
2014-12-10Merge tag 'trace-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "There was a lot of clean ups and minor fixes. One of those clean ups was to the trace_seq code. It also removed the return values to the trace_seq_*() functions and use trace_seq_has_overflowed() to see if the buffer filled up or not. This is similar to work being done to the seq_file code as well in another tree. Some of the other goodies include: - Added some "!" (NOT) logic to the tracing filter. - Fixed the frame pointer logic to the x86_64 mcount trampolines - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems. That is, the ftrace trampoline can be dynamically allocated and be called directly by functions that only have a single hook to them" * tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits) tracing: Truncated output is better than nothing tracing: Add additional marks to signal very large time deltas Documentation: describe trace_buf_size parameter more accurately tracing: Allow NOT to filter AND and OR clauses tracing: Add NOT to filtering logic ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter ftrace/x86: Get rid of ftrace_caller_setup ftrace/x86: Have save_mcount_regs macro also save stack frames if needed ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs ftrace/x86: Simplify save_mcount_regs on getting RIP ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file ftrace/x86: Have static tracing also use ftrace_caller_setup ftrace/x86: Have static function tracing always test for function graph kprobes: Add IPMODIFY flag to kprobe_ftrace_ops ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict kprobes/ftrace: Recover original IP if pre_handler doesn't change it tracing/trivial: Fix typos and make an int into a bool tracing: Deletion of an unnecessary check before iput() ...
2014-12-09Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. The largest single change here this time around is the Tegra iommu/memory controller driver, which gets updated to the new iommu DT binding. More drivers like this are likely to follow for the following merge window, but we should be able to do those through the iommu maintainer. Other notable changes are: - reset controller drivers from the reset maintainer (socfpga, sti, berlin) - fixes for the keystone navigator driver merged last time - at91 rtc driver changes related to the at91 cleanups - ARM perf driver changes from Will Deacon - updates for the brcmstb_gisb driver" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers clocksource: arch_timer: Fix code to use physical timers when requested memory: Add NVIDIA Tegra memory controller support bus: brcmstb_gisb: Add register offset tables for older chips bus: brcmstb_gisb: Look up register offsets in a table bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses bus: brcmstb_gisb: Make the driver buildable on MIPS of: Add NVIDIA Tegra memory controller binding ARM: tegra: Move AHB Kconfig to drivers/amba amba: Add Kconfig file clk: tegra: Implement memory-controller clock serial: samsung: Fix serial config dependencies for exynos7 bus: brcmstb_gisb: resolve section mismatch ARM: common: edma: edma_pm_resume may be unused ARM: common: edma: add suspend resume hook powerpc/iommu: Rename iommu_[un]map_sg functions rtc: at91sam9: add DT bindings documentation rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK ARM: at91: add clk_lookup entry for RTT devices rtc: at91sam9: rework the Kconfig description ...
2014-12-09powerpc: Secondary CPUs must set cpu_callin_map after setting active and onlineAnton Blanchard
I have a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active and online bits are set before allowing the master to continue on. The master unparks the secondary CPUs kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq, and since the active and online bits aren't set we choose some other CPU to run on. Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-08powerpc/powernv: Return to cpu offline loop when finished in KVM guestPaul Mackerras
When a secondary hardware thread has finished running a KVM guest, we currently put that thread into nap mode using a nap instruction in the KVM code. This changes the code so that instead of doing a nap instruction directly, we instead cause the call to power7_nap() that put the thread into nap mode to return. The reason for doing this is to avoid having the KVM code having to know what low-power mode to put the thread into. In the case of a secondary thread used to run a KVM guest, the thread will be offline from the point of view of the host kernel, and the relevant power7_nap() call is the one in pnv_smp_cpu_disable(). In this case we don't want to clear pending IPIs in the offline loop in that function, since that might cause us to miss the wakeup for the next time the thread needs to run a guest. To tell whether or not to clear the interrupt, we use the SRR1 value returned from power7_nap(), and check if it indicates an external interrupt. We arrange that the return from power7_nap() when we have finished running a guest returns 0, so pending interrupts don't get flushed in that case. Note that it is important a secondary thread that has finished executing in the guest, or that didn't have a guest to run, should not return to power7_nap's caller while the kvm_hstate.hwthread_req flag in the PACA is non-zero, because the return from power7_nap will reenable the MMU, and the MMU might still be in guest context. In this situation we spin at low priority in real mode waiting for hwthread_req to become zero. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-05powerpc/book3s: Fix partial invalidation of TLBs in MCE code.Mahesh Salgaonkar
The existing MCE code calls flush_tlb hook with IS=0 (single page) resulting in partial invalidation of TLBs which is not right. This patch fixes that by passing IS=0xc00 to invalidate whole TLB for successful recovery from TLB and ERAT errors. Cc: stable@vger.kernel.org Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-05powerpc/mm: don't do tlbie for updatepp request with NO HPTE faultAneesh Kumar K.V
upatepp can get called for a nohpte fault when we find from the linux page table that the translation was hashed before. In that case we are sure that there is no existing translation, hence we could avoid doing tlbie. We could possibly race with a parallel fault filling the TLB. But that should be ok because updatepp is only ever relaxing permissions. We also look at linux pte permission bits when filling hash pte permission bits. We also hold the linux pte busy bits while inserting/updating a hashpte entry, hence a paralle update of linux pte is not possible. On the other hand mprotect involves ptep_modify_prot_start which cause a hpte invalidate and not updatepp. Performance number: We use randbox_access_bench written by Anton. Kernel with THP disabled and smaller hash page table size. 86.60% random_access_b [kernel.kallsyms] [k] .native_hpte_updatepp 2.10% random_access_b random_access_bench [.] doit 1.99% random_access_b [kernel.kallsyms] [k] .do_raw_spin_lock 1.85% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 1.26% random_access_b [kernel.kallsyms] [k] .native_flush_hash_range 1.18% random_access_b [kernel.kallsyms] [k] .__delay 0.69% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 0.37% random_access_b [kernel.kallsyms] [k] .clear_user_page 0.34% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 0.32% random_access_b [kernel.kallsyms] [k] fast_exception_return 0.30% random_access_b [kernel.kallsyms] [k] .hash_page_mm With Fix: 27.54% random_access_b random_access_bench [.] doit 22.90% random_access_b [kernel.kallsyms] [k] .native_hpte_insert 5.76% random_access_b [kernel.kallsyms] [k] .native_hpte_remove 5.20% random_access_b [kernel.kallsyms] [k] fast_exception_return 5.12% random_access_b [kernel.kallsyms] [k] .__hash_page_64K 4.80% random_access_b [kernel.kallsyms] [k] .hash_page_mm 3.31% random_access_b [kernel.kallsyms] [k] data_access_common 1.84% random_access_b [kernel.kallsyms] [k] .trace_hardirqs_on_caller Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-02Merge remote-tracking branch 'benh/next' into nextMichael Ellerman
Merge updates collected & acked by Ben. A few EEH patches from Gavin, some mm updates from Aneesh and a few odds and ends.
2014-12-02powerpc: Drop useless warning in eeh_init()Greg Kurz
This is what we get in dmesg when booting a pseries guest and the hypervisor doesn't provide EEH support. [ 0.166655] EEH functionality not supported [ 0.166778] eeh_init: Failed to call platform init function (-22) Since both powernv_eeh_init() and pseries_eeh_init() already complain when hitting an error, it is not needed to print more (especially such an uninformative message). Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-12-02powerpc/powernv: Cleanup unused MCE definitions/declarations.Mahesh Salgaonkar
Cleanup OpalMCE_* definitions/declarations and other related code which is not used anymore. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Acked-by: Benjamin Herrrenschmidt <benh@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>