summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/mm/hugetlbpage.c
AgeCommit message (Collapse)Author
2009-01-06mm: report the MMU pagesize in /proc/pid/smapsMel Gorman
The KernelPageSize entry in /proc/pid/smaps is the pagesize used by the kernel to back a VMA. This matches the size used by the MMU in the majority of cases. However, one counter-example occurs on PPC64 kernels whereby a kernel using 64K as a base pagesize may still use 4K pages for the MMU on older processor. To distinguish, this patch reports MMUPageSize as the pagesize used by the MMU in /proc/pid/smaps. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: "KOSAKI Motohiro" <kosaki.motohiro@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-16Merge branch 'merge' into nextPaul Mackerras
2008-12-16powerpc: Check for valid hugepage size in hugetlb_get_unmapped_areaBrian King
It looks like most of the hugetlb code is doing the correct thing if hugepages are not supported, but the mmap code is not. If we get into the mmap code when hugepages are not supported, such as in an LPAR which is running Active Memory Sharing, we can oops the kernel. This fixes the oops being seen in this path. oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=1024 NUMA pSeries Modules linked in: nfs(N) lockd(N) nfs_acl(N) sunrpc(N) ipv6(N) fuse(N) loop(N) dm_mod(N) sg(N) ibmveth(N) sd_mod(N) crc_t10dif(N) ibmvscsic(N) scsi_transport_srp(N) scsi_tgt(N) scsi_mod(N) Supported: No NIP: c000000000038d60 LR: c00000000003945c CTR: c0000000000393f0 REGS: c000000077e7b830 TRAP: 0300 Tainted: G (2.6.27.5-bz50170-2-ppc64) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 44000448 XER: 20000001 DAR: c000002000af90a8, DSISR: 0000000040000000 TASK = c00000007c1b8600[4019] 'hugemmap01' THREAD: c000000077e78000 CPU: 6 GPR00: 0000001fffffffe0 c000000077e7bab0 c0000000009a4e78 0000000000000000 GPR04: 0000000000010000 0000000000000001 00000000ffffffff 0000000000000001 GPR08: 0000000000000000 c000000000af90c8 0000000000000001 0000000000000000 GPR12: 000000000000003f c000000000a73880 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000010000 GPR20: 0000000000000000 0000000000000003 0000000000010000 0000000000000001 GPR24: 0000000000000003 0000000000000000 0000000000000001 ffffffffffffffb5 GPR28: c000000077ca2e80 0000000000000000 c00000000092af78 0000000000010000 NIP [c000000000038d60] .slice_get_unmapped_area+0x6c/0x4e0 LR [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80 Call Trace: [c000000077e7bbc0] [c00000000003945c] .hugetlb_get_unmapped_area+0x6c/0x80 [c000000077e7bc30] [c000000000107e30] .get_unmapped_area+0x64/0xd8 [c000000077e7bcb0] [c00000000010b140] .do_mmap_pgoff+0x140/0x420 [c000000077e7bd80] [c00000000000bf5c] .sys_mmap+0xc4/0x140 [c000000077e7be30] [c0000000000086b4] syscall_exit+0x0/0x40 Instruction dump: fac1ffb0 fae1ffb8 fb01ffc0 fb21ffc8 fb41ffd0 fb61ffd8 fb81ffe0 fbc1fff0 fbe1fff8 f821fef1 f8c10158 f8e10160 <7d49002e> f9010168 e92d01b0 eb4902b0 Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-03Merge branch 'merge'Paul Mackerras
2008-11-30powerpc set_huge_psize() false positiveAl Viro
called only from __init, calls __init. Incidentally, it ought to be static in file. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06powerpc: Hugetlb pgtable cache access cleanupJon Tollefson
Andrew Morton suggested that using a macro that makes an array reference look like a function call makes it harder to understand the code. This therefore removes the huge_pgtable_cache(psize) macro and replaces its uses with pgtable_cache[HUGE_PGTABLE_INDEX(psize)]. Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-09-15powerpc: Clean up hugepage pagetable allocation for powerpc with 16G pagesDavid Gibson
There is a small bug in the handling of 16G hugepages recently added to the kernel. This doesn't cause a crash or other user-visible problems, but it does mean that more levels of pagetable are allocated than makes sense for 16G pages. The hugepage pagetables for the 16G pages are allocated much lower in the pagetable tree than they should be, with the intervening levels allocated with full pmd and pud pages which will only ever have one entry filled in. This corrects this problem, at the same time cleaning up the handling of which level 64k versus 16M hugepage pagetables are allocated at. The new way of formatting the tests should be more robust against changes in pagetable structure, or any newly added hugepage sizes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-28powerpc: Disable 64K hugetlb support when doing 64K SPU mappingsBenjamin Herrenschmidt
The 64K SPU local store mapping feature is incompatible with the 64K huge pages support due to the inability of some parts of the memory management to differenciate between them while they use a different page table format. For now, disable 64K huge pages when CONFIG_SPU_FS_64K_LS, in the long run, this can be fixed by making this feature use the hugetlb page table format. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-26SL*B: drop kmem cache argument from constructorAlexey Dobriyan
Kmem cache passed to constructor is only needed for constructors that are themselves multiplexeres. Nobody uses this "feature", nor does anybody uses passed kmem cache in non-trivial way, so pass only pointer to object. Non-trivial places are: arch/powerpc/mm/init_64.c arch/powerpc/mm/hugetlbpage.c This is flag day, yes. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Matt Mackall <mpm@selenic.com> [akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c] [akpm@linux-foundation.org: fix mm/slab.c] [akpm@linux-foundation.org: fix ubifs] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24powerpc: support multiple hugepage sizesJon Tollefson
Instead of using the variable mmu_huge_psize to keep track of the huge page size we use an array of MMU_PAGE_* values. For each supported huge page size we need to know the hugepte_shift value and have a pgtable_cache. The hstate or an mmu_huge_psizes index is passed to functions so that they know which huge page size they should use. The hugepage sizes 16M and 64K are setup(if available on the hardware) so that they don't have to be set on the boot cmd line in order to use them. The number of 16G pages have to be specified at boot-time though (e.g. hugepagesz=16G hugepages=5). Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24powerpc: define support for 16G hugepagesJon Tollefson
The huge page size is defined for 16G pages. If a hugepagesz of 16G is specified at boot-time then it becomes the huge page size instead of the default 16M. The change in pgtable-64K.h is to the macro pte_iterate_hashed_subpages to make the increment to va (the 1 being shifted) be a long so that it is not shifted to 0. Otherwise it would create an infinite loop when the shift value is for a 16G page (when base page size is 64K). Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24powerpc: scan device tree for gigantic pagesJon Tollefson
The 16G huge pages have to be reserved in the HMC prior to boot. The location of the pages are placed in the device tree. This patch adds code to scan the device tree during very early boot and save these page locations until hugetlbfs is ready for them. Acked-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24powerpc: function to allocate gigantic hugepagesJon Tollefson
The 16G page locations have been saved during early boot in an array. The alloc_bootmem_huge_page() function adds a page from here to the huge_boot_pages list. Acked-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24hugetlb: introduce pud_hugeAndi Kleen
Straight forward extensions for huge pages located in the PUD instead of PMDs. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24hugetlb: modular state for hugetlb page sizeAndi Kleen
The goal of this patchset is to support multiple hugetlb page sizes. This is achieved by introducing a new struct hstate structure, which encapsulates the important hugetlb state and constants (eg. huge page size, number of huge pages currently allocated, etc). The hstate structure is then passed around the code which requires these fields, they will do the right thing regardless of the exact hstate they are operating on. This patch adds the hstate structure, with a single global instance of it (default_hstate), and does the basic work of converting hugetlb to use the hstate. Future patches will add more hstate structures to allow for different hugetlbfs mounts to have different page sizes. [akpm@linux-foundation.org: coding-style fixes] Acked-by: Adam Litke <agl@us.ibm.com> Acked-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24mm: remove double indirection on tlb parameter to free_pgd_range() & CoJan Beulich
The double indirection here is not needed anywhere and hence (at least) confusing. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-01powerpc: hash_huge_page() should get the WIMG bits from the lpteDave Kleikamp
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Jon Tollefson <kniht@linux.vnet.ibm.com> Cc: Adam Litke <agl@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-30powerpc: Free a PTE bit on ppc64 with 64K pagesBenjamin Herrenschmidt
This frees a PTE bit when using 64K pages on ppc64. This is done by getting rid of the separate _PAGE_HASHPTE bit. Instead, we just test if any of the 16 sub-page bits is set. For non-combo pages (ie. real 64K pages), we set SUB0 and the location encoding in that field. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Add hugepagesz boot-time parameterJon Tollefson
This adds the hugepagesz boot-time parameter for ppc64. It lets one pick the size for huge pages. The choices available are 64K and 16M when the base page size is 4k. It defaults to 16M (previously the only only choice) if nothing or an invalid choice is specified. Tested 64K huge pages successfully with the libhugetlbfs 1.2. Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17Slab API: remove useless ctor parameter and reorder parametersChristoph Lameter
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[POWERPC] Use 1TB segmentsPaul Mackerras
This makes the kernel use 1TB segments for all kernel mappings and for user addresses of 1TB and above, on machines which support them (currently POWER5+, POWER6 and PA6T). We detect that the machine supports 1TB segments by looking at the ibm,processor-segment-sizes property in the device tree. We don't currently use 1TB segments for user addresses < 1T, since that would effectively prevent 32-bit processes from using huge pages unless we also had a way to revert to using 256MB segments. That would be possible but would involve extra complications (such as keeping track of which segment size was used when HPTEs were inserted) and is not addressed here. Parts of this patch were originally written by Ben Herrenschmidt. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17[POWERPC] Clean out a bunch of duplicate includesJesper Juhl
This removes several duplicate includes from arch/powerpc/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09[POWERPC] Introduce address space "slices"Benjamin Herrenschmidt
The basic issue is to be able to do what hugetlbfs does but with different page sizes for some other special filesystems; more specifically, my need is: - Huge pages - SPE local store mappings using 64K pages on a 4K base page size kernel on Cell - Some special 4K segments in 64K-page kernels for mapping a dodgy type of powerpc-specific infiniband hardware that requires 4K MMU mappings for various reasons I won't explain here. The main issues are: - To maintain/keep track of the page size per "segment" (as we can only have one page size per segment on powerpc, which are 256MB divisions of the address space). - To make sure special mappings stay within their allotted "segments" (including MAP_FIXED crap) - To make sure everybody else doesn't mmap/brk/grow_stack into a "segment" that is used for a special mapping Some of the necessary mechanisms to handle that were present in the hugetlbfs code, but mostly in ways not suitable for anything else. The patch relies on some changes to the generic get_unmapped_area() that just got merged. It still hijacks hugetlb callbacks here or there as the generic code hasn't been entirely cleaned up yet but that shouldn't be a problem. So what is a slice ? Well, I re-used the mechanism used formerly by our hugetlbfs implementation which divides the address space in "meta-segments" which I called "slices". The division is done using 256MB slices below 4G, and 1T slices above. Thus the address space is divided currently into 16 "low" slices and 16 "high" slices. (Special case: high slice 0 is the area between 4G and 1T). Doing so simplifies significantly the tracking of segments and avoids having to keep track of all the 256MB segments in the address space. While I used the "concepts" of hugetlbfs, I mostly re-implemented everything in a more generic way and "ported" hugetlbfs to it. Slices can have an associated page size, which is encoded in the mmu context and used by the SLB miss handler to set the segment sizes. The hash code currently doesn't care, it has a specific check for hugepages, though I might add a mechanism to provide per-slice hash mapping functions in the future. The slice code provide a pair of "generic" get_unmapped_area() (bottomup and topdown) functions that should work with any slice size. There is some trickiness here so I would appreciate people to have a look at the implementation of these and let me know if I got something wrong. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07get_unmapped_area handles MAP_FIXED on powerpcBenjamin Herrenschmidt
The current get_unmapped_area code calls the f_ops->get_unmapped_area or the arch one (via the mm) only when MAP_FIXED is not passed. That makes it impossible for archs to impose proper constraints on regions of the virtual address space. To work around that, get_unmapped_area() then calls some hugetlbfs specific hacks. This cause several problems, among others: - It makes it impossible for a driver or filesystem to do the same thing that hugetlbfs does (for example, to allow a driver to use larger page sizes to map external hardware) if that requires applying a constraint on the addresses (constraining that mapping in certain regions and other mappings out of those regions). - Some archs like arm, mips, sparc, sparc64, sh and sh64 already want MAP_FIXED to be passed down in order to deal with aliasing issues. The code is there to handle it... but is never called. This series of patches moves the logic to handle MAP_FIXED down to the various arch/driver get_unmapped_area() implementations, and then changes the generic code to always call them. The hugetlbfs hacks then disappear from the generic code. Since I need to do some special 64K pages mappings for SPEs on cell, I need to work around the first problem at least. I have further patches thus implementing a "slices" layer that handles multiple page sizes through slices of the address space for use by hugetlbfs, the SPE code, and possibly others, but it requires that serie of patches first/ There is still a potential (but not practical) issue due to the fact that filesystems/drivers implemeting g_u_a will effectively bypass all arch checks. This is not an issue in practice as the only filesystems/drivers using that hook are doing so for arch specific purposes in the first place. There is also a problem with mremap that will completely bypass all arch checks. I'll try to address that separately, I'm not 100% certain yet how, possibly by making it not work when the vma has a file whose f_ops has a get_unmapped_area callback, and by making it use is_hugepage_only_range() before expanding into a new area. Also, I want to turn is_hugepage_only_range() into a more generic is_normal_page_range() as that's really what it will end up meaning when used in stack grow, brk grow and mremap. None of the above "issues" however are introduced by this patch, they are already there, so I think the patch can go ini for 2.6.22. This patch: Handle MAP_FIXED in powerpc's arch_get_unmapped_area() in all 3 implementations of it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Adam Litke <agl@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07slab allocators: remove multiple alignment specificationsChristoph Lameter
It is not necessary to tell the slab allocators to align to a cacheline if an explicit alignment was already specified. It is rather confusing to specify multiple alignments. Make sure that the call sites only use one form of alignment. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07slab allocators: Remove obsolete SLAB_MUST_HWCACHE_ALIGNChristoph Lameter
This patch was recently posted to lkml and acked by Pekka. The flag SLAB_MUST_HWCACHE_ALIGN is 1. Never checked by SLAB at all. 2. A duplicate of SLAB_HWCACHE_ALIGN for SLUB 3. Fulfills the role of SLAB_HWCACHE_ALIGN for SLOB. The only remaining use is in sparc64 and ppc64 and their use there reflects some earlier role that the slab flag once may have had. If its specified then SLAB_HWCACHE_ALIGN is also specified. The flag is confusing, inconsistent and has no purpose. Remove it. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-13[POWERPC] Make tlb flush batch use lazy MMU modeBenjamin Herrenschmidt
The current tlb flush code on powerpc 64 bits has a subtle race since we lost the page table lock due to the possible faulting in of new PTEs after a previous one has been removed but before the corresponding hash entry has been evicted, which can leads to all sort of fatal problems. This patch reworks the batch code completely. It doesn't use the mmu_gather stuff anymore. Instead, we use the lazy mmu hooks that were added by the paravirt code. They have the nice property that the enter/leave lazy mmu mode pair is always fully contained by the PTE lock for a given range of PTEs. Thus we can guarantee that all batches are flushed on a given CPU before it drops that lock. We also generalize batching for any PTE update that require a flush. Batching is now enabled on a CPU by arch_enter_lazy_mmu_mode() and disabled by arch_leave_lazy_mmu_mode(). The code epects that this is always contained within a PTE lock section so no preemption can happen and no PTE insertion in that range from another CPU. When batching is enabled on a CPU, every PTE updates that need a hash flush will use the batch for that flush. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-10[POWERPC] Fix spu SLB invalidationsBenjamin Herrenschmidt
The SPU code doesn't properly invalidate SPUs SLBs when necessary, for example when changing a segment size from the hugetlbfs code. In addition, it saves and restores the SLB content on context switches which makes it harder to properly handle those invalidations. This patch removes the saving & restoring for now, something more efficient might be found later on. It also adds a spu_flush_all_slbs(mm) that can be used by the core mm code to flush the SLBs of all SPEs that are running a given mm at the time of the flush. In order to do that, it adds a spinlock to the list of all SPEs and move some bits & pieces from spufs to spu_base.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-01-24[POWERPC] TLB insertion cleanupIshizaki Kou
This patch changes handling return value of ppc_md.hpte_insert() into the same way as __hash_page_*(). Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-09[POWERPC] Fix bogus BUG_ON() in in hugetlb_get_unmapped_area()David Gibson
The powerpc specific version of hugetlb_get_unmapped_area() makes some unwarranted assumptions about what checks have been made to its parameters by its callers. This will lead to a BUG_ON() if a 32-bit process attempts to make a hugepage mapping which extends above TASK_SIZE (4GB). I'm not sure if these assumptions came about because they were valid with earlier versions of the get_unmapped_area() path, or if it was always broken. Nonetheless this patch fixes the logic, and removes the crash. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] shared page table for hugetlb pageChen, Kenneth W
Following up with the work on shared page table done by Dave McCracken. This set of patch target shared page table for hugetlb memory only. The shared page table is particular useful in the situation of large number of independent processes sharing large shared memory segments. In the normal page case, the amount of memory saved from process' page table is quite significant. For hugetlb, the saving on page table memory is not the primary objective (as hugetlb itself already cuts down page table overhead significantly), instead, the purpose of using shared page table on hugetlb is to allow faster TLB refill and smaller cache pollution upon TLB miss. With PT sharing, pte entries are shared among hundreds of processes, the cache consumption used by all the page table is smaller and in return, application gets much higher cache hit ratio. One other effect is that cache hit ratio with hardware page walker hitting on pte in cache will be higher and this helps to reduce tlb miss latency. These two effects contribute to higher application performance. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Acked-by: Hugh Dickins <hugh@veritas.com> Cc: Dave McCracken <dmccr@us.ibm.com> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Adam Litke <agl@us.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-14[PATCH] hugetlb: prepare_hugepage_range check offset tooHugh Dickins
(David:) If hugetlbfs_file_mmap() returns a failure to do_mmap_pgoff() - for example, because the given file offset is not hugepage aligned - then do_mmap_pgoff will go to the unmap_and_free_vma backout path. But at this stage the vma hasn't been marked as hugepage, and the backout path will call unmap_region() on it. That will eventually call down to the non-hugepage version of unmap_page_range(). On ppc64, at least, that will cause serious problems if there are any existing hugepage pagetable entries in the vicinity - for example if there are any other hugepage mappings under the same PUD. unmap_page_range() will trigger a bad_pud() on the hugepage pud entries. I suspect this will also cause bad problems on ia64, though I don't have a machine to test it on. (Hugh:) prepare_hugepage_range() should check file offset alignment when it checks virtual address and length, to stop MAP_FIXED with a bad huge offset from unmapping before it fails further down. PowerPC should apply the same prepare_hugepage_range alignment checks as ia64 and all the others do. Then none of the alignment checks in hugetlbfs_file_mmap are required (nor is the check for too small a mapping); but even so, move up setting of VM_HUGETLB and add a comment to warn of what David Gibson discovered - if hugetlbfs_file_mmap fails before setting it, do_mmap_pgoff's unmap_region when unwinding from error will go the non-huge way, which may cause bad behaviour on architectures (powerpc and ia64) which segregate their huge mappings into a separate region of the address space. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Adam Litke <agl@us.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-01[POWERPC] Make high hugepage areas preempt safeHugh Dickins
Checking source for other get_paca()->field preemption dangers found that open_high_hpage_areas does a structure copy into its paca while preemption is enabled: unsafe however gcc accomplishes it. Just remove that copy: it's done safely afterwards by on_each_cpu, as in open_low_hpage_areas. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-24[POWERPC] hugepage BUG fixAdam Litke
On Tue, 2006-08-15 at 08:22 -0700, Dave Hansen wrote: > kernel BUG in cache_free_debugcheck at mm/slab.c:2748! Alright, this one is only triggered when slab debugging is enabled. The slabs are assumed to be aligned on a HUGEPTE_TABLE_SIZE boundary. The free path makes use of this assumption and uses the lowest nibble to pass around an index into an array of kmem_cache pointers. With slab debugging turned on, the slab is still aligned, but the "working" object pointer is not. This would break the assumption above that a full nibble is available for the PGF_CACHENUM_MASK. The following patch reduces PGF_CACHENUM_MASK to cover only the two least significant bits, which is enough to cover the current number of 4 pgtable cache types. Then use this constant to mask out the appropriate part of the huge pte pointer. Signed-off-by: Adam Litke <agl@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28[PATCH] powerpc: Fix pagetable bloat for hugepagesDavid Gibson
At present, ARCH=powerpc kernels can waste considerable space in pagetables when making large hugepage mappings. Hugepage PTEs go in PMD pages, but each PMD page maps 256M and so contains only 16 hugepage PTEs (128 bytes of data), but takes up a 1024 byte allocation. With CONFIG_PPC_64K_PAGES enabled (64k base page size), the situation is worse. Now hugepage PTEs are at the PTE page level (also mapping 256M), so we store 16 hugepage PTEs in a 64k allocation. The PowerPC MMU already means that any 256M region is either all hugepage, or all normal pages. Thus, with some care, we can use a different allocation for the hugepage PTE tables and only allocate the 128 bytes necessary. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] hugepage: is_aligned_hugepage_range() cleanupDavid Gibson
Quite a long time back, prepare_hugepage_range() replaced is_aligned_hugepage_range() as the callback from mm/mmap.c to arch code to verify if an address range is suitable for a hugepage mapping. is_aligned_hugepage_range() stuck around, but only to implement prepare_hugepage_range() on archs which didn't implement their own. Most archs (everything except ia64 and powerpc) used the same implementation of is_aligned_hugepage_range(). On powerpc, which implements its own prepare_hugepage_range(), the custom version was never used. In addition, "is_aligned_hugepage_range()" was a bad name, because it suggests it returns true iff the given range is a good hugepage range, whereas in fact it returns 0-or-error (so the sense is reversed). This patch cleans up by abolishing is_aligned_hugepage_range(). Instead prepare_hugepage_range() is defined directly. Most archs use the default version, which simply checks the given region is aligned to the size of a hugepage. ia64 and powerpc define custom versions. The ia64 one simply checks that the range is in the correct address space region in addition to being suitably aligned. The powerpc version (just as previously) checks for suitable addresses, and if necessary performs low-level MMU frobbing to set up new areas for use by hugepages. No libhugetlbfs testsuite regressions on ppc64 (POWER5 LPAR). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] powerpc: fix two build warningsArnd Bergmann
Building the arch/powerpc tree currently gives me two warnings with gcc-4.0: arch/powerpc/mm/imalloc.c: In function '__im_get_area': arch/powerpc/mm/imalloc.c:225: warning: 'tmp' may be used uninitialized in this function arch/powerpc/mm/hugetlbpage.c: In function 'hugetlb_get_unmapped_area': arch/powerpc/mm/hugetlbpage.c:608: warning: unused variable 'vma' both fixes are trivial. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: Make hugepage mappings respect hint addressesDavid Gibson
Currently, the powerpc version of hugetlb_get_unmapped_area() entirely ignores the hint address. The only way to get a hugepage mapping at a specified address is with MAP_FIXED, in which case there's no way (short of parsing /proc/self/maps) for userspace to tell if it will clobber an existing mapping. This is inconvenient, so the patch below makes hugepage mappings use the given hint address if possible. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-09[PATCH] powerpc: Fix SLB flushing path in hugepageDavid Gibson
On ppc64, when opening a new hugepage region, we need to make sure any old normal-page SLBs for the area are flushed on all CPUs. There was a bug in this logic - after putting the new hugepage area masks into the thread structure, we copied it into the paca (read by the SLB miss handler) only on one CPU, not on all. This could cause incorrect SLB entries to be loaded when a multithreaded program was running simultaneously on several CPUs. This patch corrects the error, copying the context information into the PACA on all CPUs using the mm in question before flushing any existing SLB entries. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-09[PATCH] powerpc: Add missing icache flushes for hugepagesDavid Gibson
On most powerpc CPUs, the dcache and icache are not coherent so between writing and executing a page, the caches must be flushed. Userspace programs assume pages given to them by the kernel are icache clean, so we must do this flush between the kernel clearing a page and it being mapped into userspace for execute. We were not doing this for hugepages, this patch corrects the situation. We use the same lazy mechanism as we use for normal pages, delaying the flush until userspace actually attempts to execute from the page in question. Tested on G5. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-08[PATCH] powerpc: Fix a huge page bugBenjamin Herrenschmidt
The 64k pages patch changed the meaning of one argument passed to the low level hash functions (from "large" it became "psize" or page size index), but one of the call sites wasn't properly updated, causing potential random weird problems with huge pages. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-25[PATCH] powerpc: More hugepage boundary case fixesDavid Gibson
Blah. The patch [0] I recently sent fixing errors with in_hugepage_area() and prepare_hugepage_range() for powerpc itself has an off-by-one bug. Furthermore, the related functions touches_hugepage_*_range() and within_hugepage_*_range() are also buggy. Some of the bugs, like those addressed in [0] originated with commit 7d24f0b8a53261709938ffabe3e00f88f6498df9 where we tweaked the semantics of where hugepages are allowed. Other bugs have been there essentially forever, and are due to the undefined behaviour of '<<' with shift counts greater than the type width (LOW_ESID_MASK could return non-zero for high ranges with the right congruences). The good news is that I now have a testsuite which should pick up things like this if they creep in again. [0] "powerpc-fix-for-hugepage-areas-straddling-4gb-boundary" Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23[PATCH] powerpc: fix for hugepage areas straddling 4GB boundaryDavid Gibson
Commit 7d24f0b8a53261709938ffabe3e00f88f6498df9 fixed bugs in the ppc64 SLB miss handler with respect to hugepage handling, and in the process tweaked the semantics of the hugepage address masks in mm_context_t. Unfortunately, it left out a couple of necessary changes to go with that change. First, the in_hugepage_area() macro was not updated to match, second prepare_hugepage_range() was not updated to correctly handle hugepages regions which straddled the 4GB point. The latter appears only to cause process-hangs when attempting to map such a region, but the former can cause oopses if a get_user_pages() is triggered at the wrong point. This patch addresses both bugs. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23[PATCH] mm: powerpc ptlock commentsHugh Dickins
Update comments (only) on page_table_lock and mmap_sem in arch/powerpc. Removed the comment on page_table_lock from hash_huge_page: since it's no longer taking page_table_lock itself, it's irrelevant whether others are; but how it is safe (even against huge file truncation?) I can't say. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ppc64: Fix bug in SLB miss handler for hugepagesDavid Gibson
This patch, however, should be applied on top of the 64k-page-size patch to fix some problems with hugepage (some pre-existing, another introduced by this patch). The patch fixes a bug in the SLB miss handler for hugepages on ppc64 introduced by the dynamic hugepage patch (commit id c594adad5653491813959277fb87a2fef54c4e05) due to a misunderstanding of the srd instruction's behaviour (mea culpa). The problem arises when a 64-bit process maps some hugepages in the low 4GB of the address space (unusual). In this case, as well as the 256M segment in question being marked for hugepages, other segments at 32G intervals will be incorrectly marked for hugepages. In the process, this patch tweaks the semantics of the hugepage bitmaps to be more sensible. Previously, an address below 4G was marked for hugepages if the appropriate segment bit in the "low areas" bitmask was set *or* if the low bit in the "high areas" bitmap was set (which would mark all addresses below 1TB for hugepage). With this patch, any given address is governed by a single bitmap. Addresses below 4GB are marked for hugepage if and only if their bit is set in the "low areas" bitmap (256M granularity). Addresses between 4GB and 1TB are marked for hugepage iff the low bit in the "high areas" bitmap is set. Higher addresses are marked for hugepage iff their bit in the "high areas" bitmap is set (1TB granularity). To avoid conflicts, this patch must be applied on top of BenH's pending patch for 64k base page size [0]. As such, this patch also addresses a hugepage problem introduced by that patch. That patch allows hugepages of 1MB in size on hardware which supports it, however, that won't work when using 4k pages (4 level pagetable), because in that case hugepage PTEs are stored at the PMD level, and each PMD entry maps 2MB. This patch simply disallows hugepages in that case (we can do something cleverer to re-enable them some other day). Built, booted, and a handful of hugepage related tests passed on POWER5 LPAR (both ARCH=powerpc and ARCH=ppc64). [0] http://gate.crashing.org/~benh/ppc64-64k-pages.diff Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06[PATCH] ppc64: support 64k pagesBenjamin Herrenschmidt
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel base page size to 64K. The resulting kernel still boots on any hardware. On current machines with 4K pages support only, the kernel will maintain 16 "subpages" for each 64K page transparently. Note that while real 64K capable HW has been tested, the current patch will not enable it yet as such hardware is not released yet, and I'm still verifying with the firmware architects the proper to get the information from the newer hypervisors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10powerpc: Merge arch/ppc64/mm to arch/powerpc/mmPaul Mackerras
This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm, and arranges that we use them when compiling with ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>