summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/85xx
AgeCommit message (Collapse)Author
2012-02-23powerpc/mpic: Remove duplicate MPIC_WANTS_RESET flagKyle Moffett
There are two separate flags controlling whether or not the MPIC is reset during initialization, which is completely unnecessary, and only one of them can be specified in the device tree. Also, most platforms in-tree right now do actually want to reset the MPIC during initialization anyways, which means lots of duplicate code passing the MPIC_WANTS_RESET flag. Fix all of the callers which currently do not pass the MPIC_WANTS_RESET flag to pass the MPIC_NO_RESET flag, then remove the MPIC_WANTS_RESET flag and make the code reset the MPIC by default. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-02-23powerpc/mpic: Remove MPIC_BROKEN_FRR_NIRQS and duplicate irq_countKyle Moffett
The mpic->irq_count variable is only used as a software error-checking limit to determine whether or not an IRQ number is valid. In board code which does not manually specify an IRQ count to mpic_alloc(), i.e. 0, it is automatically detected from the number of ISUs and the ISU size. In practice, all hardware ends up with irq_count == num_sources, so all of the runtime checks on mpic->irq_count should just check the value of mpic->num_sources instead. When platform hardware does not correctly report the number of IRQs, which only happens on the MPC85xx/MPC86xx, the MPIC_BROKEN_FRR_NIRQS flag is used to override the detected value of num_sources with the manual irq_count parameter. Since there's no need to manually specify the number of IRQs except in this case, the extra flag can be eliminated and the test changed to "irq_count != 0". Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-01-17powerpc: fix compile error with 85xx/p1022_ds.cMichael Neuling
Current linux-next compiled with mpc85xx_defconfig causes this: arch/powerpc/platforms/85xx/p1022_ds.c:341:14: error: 'udbg_progress' undeclared here (not in a function) Add include to fix this. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04powerpc: fix compile error with 85xx/p1010rdb.cTony Breeds
Current linux-next compiled with mpc85xx_defconfig causes this: arch/powerpc/platforms/85xx/p1010rdb.c:41:14: error: 'np' undeclared (first use in this function) arch/powerpc/platforms/85xx/p1023_rds.c:102:14: error: 'np' undeclared (first use in this function) Introduced in: commit 996983b75cebb1bc1c2c545f20336f24ebfa17af Author: Kyle Moffett <Kyle.D.Moffett@boeing.com> Date: Fri Dec 2 06:28:02 2011 +0000 powerpc/mpic: Search for open-pic device-tree node if NULL Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-01-04powerpc: fix compile error with 85xx/p1023_rds.cMichael Neuling
Current linux-next compiled with mpc85xx_smp_defconfig causes this: arch/powerpc/platforms/85xx/p1023_rds.c: In function 'mpc85xx_rds_pic_init': arch/powerpc/platforms/85xx/p1023_rds.c:102:14: error: 'np' undeclared (first use in this function) arch/powerpc/platforms/85xx/p1023_rds.c:102:14: note: each undeclared identifier is reported only once for each function it appears in Introduced in: commit 996983b75cebb1bc1c2c545f20336f24ebfa17af Author: Kyle Moffett <Kyle.D.Moffett@boeing.com> Date: Fri Dec 2 06:28:02 2011 +0000 powerpc/mpic: Search for open-pic device-tree node if NULL Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-12-07powerpc/mpic: Invert the meaning of MPIC_PRIMARYKyle Moffett
It turns out that there are only 2 in-tree platforms which use MPICs which are not "primary": IBM Cell and PowerMac. To reduce the complexity of the typical board setup code, invert the MPIC_PRIMARY bit into MPIC_SECONDARY. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07powerpc/mpic: Search for open-pic device-tree node if NULLKyle Moffett
Almost all PowerPC platforms use a standard "open-pic" device node so the mpic_alloc() function now accepts NULL for the device-node. This will cause it to perform a default search with of_find_matching_node(). Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07powerpc: Consolidate mpic_alloc() OF address translationKyle Moffett
Instead of using the open-coded "reg" property lookup and address translation in mpic_alloc(), directly call of_address_to_resource(). This includes various workarounds for special cases which the naive of_address_translate() does not. Afterwards it is possible to remove the copiously copy-pasted calls to of_address_translate() from the 85xx/86xx/powermac platforms. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-12-07powerpc/85xx: Move mpc85xx_smp_init() decl to a new "smp.h"Kyle Moffett
This removes a bunch of "extern" declarations and CONFIG_SMP ifdefs. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-25Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt
2011-11-25powerpc/85xx: Mark cascade irq IRQF_NO_THREADThomas Gleixner
Cascade interrupt must run in hard interrupt context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-24powerpc/85xx: Renamed mpc85xx_common.c to common.cKumar Gala
The file name is already scoped by the directory its in. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/85xx: Additional consolidate of_platform_bus_probe callsKumar Gala
P1010RDB & P1023RDS can use the new mpc85xx_common_publish_devices(). Also move 'fsl,srio' into the list of standard buses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/85xx: consolidate of_platform_bus_probe callsDmitry Eremin-Solenikov
85xx board files have a lot of duplication in *_publish_devices()/ *_declare_of_platform_devices() functions. Merge that into a single function common to most of the boards. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/85xx: separate cpm2 pic initDmitry Eremin-Solenikov
Separate handling of CPM2 PIC initialization to mpc85xx_cpm2_pic_init() function. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-24powerpc/8xxx: Update device tree bus probe for new RapidIO node bindingKai Jiang
Update of_platform_bus_probe() RapidIO node to be compitable with new RapidIO dts compatible property. Signed-off-by: Kai Jiang <Kai.Jiang@freescale.com> Acked-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/85xx: Fix compile error on p3060_qds.cKumar Gala
arch/powerpc/platforms/85xx/p3060_qds.c: In function '__machine_initcall_p3060_qds_declare_of_platform_devices': arch/powerpc/platforms/85xx/p3060_qds.c:73:1: error: implicit declaration of function 'declare_of_platform_devices' declare_of_platform_devices should have been corenet_ds_publish_devices. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-23powerpc/p3060qds: Fix select of 'MPC8xxx_GPIO'Paul Bolle
The driver for the Freescale P3060 QDS got added by commit 96cc017c5b ("[...] Add support for P3060QDS board"). Its Kconfig entry selects MPC8xxx_GPIO. But at the time that driver got added MPC8xxx_GPIO was already renamed to GPIO_MPC8XXX, by commit c68308dd50c ("gpio: move mpc8xxx/512x gpio driver to drivers/gpio"). So make this driver select GPIO_MPC8XXX. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-06Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-03powerpc/p3060qds: Add support for P3060QDS boardShengzhou Liu
The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC. The P3060 Processor combines six e500mc Power Architecture processor cores with high-performance datapath acceleration architecture(DPAA), CoreNet fabric infrastructure, as well as network and peripheral interfaces. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM Ethernet: - 4x1G + 4x1G/2.5G Ethernet controllers - 2xRGMII + 1xMII, three VSC8641 PHYs on board - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports up to four UARTs RapidIO: Supports two serial RapidIO ports Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-03powerpc/85xx: Make kexec to interate over online cpusMatthew McClintock
This is not strictly required, because this iterates over logical cpus and they are not (currently) discontigous. But, it's cleaner code and more obvious what is going on Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-31powerpc: remove non-required uses of include <linux/module.h>Paul Gortmaker
None of the files touched here are modules, and they are not exporting any symbols either -- so there is no need to be including the module.h. Builds of all the files remains successful. Even kernel/module.c does not need to include it, since it includes linux/moduleloader.h instead. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-30Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6Linus Torvalds
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (270 commits) video: platinumfb: Add __devexit_p at necessary place drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported drivers/video: fsl-diu-fb: remove unused panel operating mode support drivers/video: fsl-diu-fb: use an enum for the AOI index drivers/video: fsl-diu-fb: add several new video modes drivers/video: fsl-diu-fb: remove broken screen blanking support drivers/video: fsl-diu-fb: move some definitions out of the header file drivers/video: fsl-diu-fb: fix some ioctls video: da8xx-fb: Increased resolution configuration of revised LCDC IP OMAPDSS: picodlp: add missing #include <linux/module.h> fb: fix au1100fb bitrot. mx3fb: fix NULL pointer dereference in screen blanking. video: irq: Remove IRQF_DISABLED smscufx: change edid data to u8 instead of char OMAPDSS: DISPC: zorder support for DSS overlays OMAPDSS: DISPC: VIDEO3 pipeline support OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting video/omap: fix build dependencies ... Fix up conflicts in: - drivers/staging/xgifb/XGI_main_26.c Changes to XGIfb_pan_var() - drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c} Removed (or in the case of apollon.c, merged into the generic DSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)
2011-10-13Kconfig: remove redundant CONFIG_ prefix on two symbolsPaul Bolle
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-13powerpc/85xx: Setup secondary cores PIR with hard SMP idKumar Gala
Normally logical and hard cpu ID are the same, however in same cases like on the P3060 they may differ. Where the logical is 0..5, the hard id goes 0,1,4..7. This can causes issues for places we utilize PIR to index into array like in debug exception handlers for finding the exception stack. Move to setting up PIR with hard_smp_processor_id fixes the issue. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boardsTimur Tabi
Standarize and document the FPGA nodes used on Freescale QorIQ reference boards. There are different kinds of FPGAs used on the boards, but only two are currently standard: "pixis", "ngpixis", and "qixis". Although there are minor differences among the boards that have one kind of FPGA, most of the functionality is the same, so it makes sense to create common compatibility strings. We also need to update the P1022DS platform file, because the compatible string for its PIXIS node has changed. This means that older kernels are not compatible with newer device trees. This is not a real problem, however, since that particular function doesn't work anyway. When the DIU is active, the PIXIS is in "indirect mode", and so cannot be accessed as a memory-mapped device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11powerpc/85xx: fix PHYS_64BIT selection for P1022DSAnatolij Gustschin
Remove wrong CONFIG_ prefix in Kconfig file. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-11powerpc/85xx: Fix support for enabling doorbells for IPIsMatthew McClintock
Commit 765342526246c97600e5344c0949824d94bb51c3 made some small changes to IPI, message_pass in smp_ops was initialized to NULL for other platforms but not for 85xx which causes us to always use the mpic for IPI's even if we support doorbells in HW. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-06powerpc/85xx: Rename p2040_rdb.c to p2041_rdb.cMingkai Hu
There's only p2041rdb board for official release, but the p2041 silicon on the board can be converted to p2040 silicon without XAUI and L2 cache function, then the board becomes p2040rdb board. so we use the file name p2041_rdb.c to handle P2040RDB board and P2041RDB board which is also consistent with the board name under U-Boot. During the rename we make few other minor changes to the device tree: * Move USB phy setting into p2041si.dtsi as its SoC not board defined * Convert PCI clock-frequency to decimal to be more readable Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-10-06powerpc/85xx: sbc8560 - correct compilation if CONFIG_PHYS_ADDR_T_64BIT is setDmitry Eremin-Solenikov
If CONFIG_PHYS_ADDR_T_64BIT is set, compilation of sbc8560 fails with the following error: arch/powerpc/platforms/85xx/sbc8560.c: In function ‘sbc8560_bdrstcr_init’: arch/powerpc/platforms/85xx/sbc8560.c:286: error: format ‘%x’ expects type ‘unsigned int’, but argument 2 has type ‘resource_size_t’ Fix that by using %pR format instead of just printing the start of resource. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-23gpio: move mpc8xxx/512x gpio driver to drivers/gpioWolfram Sang
Move the driver to the place where it is expected to be nowadays. Also rename its CONFIG-name to match the rest and adapt the defconfigs. Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to the platforms, because this option is per-platform and not per-driver. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-08-29Merge branch 'master' of ↵Florian Tobias Schandinat
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x into fbdev-next Conflicts: drivers/video/atmel_lcdfb.c
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (99 commits) drivers/virt: add missing linux/interrupt.h to fsl_hypervisor.c powerpc/85xx: fix mpic configuration in CAMP mode powerpc: Copy back TIF flags on return from softirq stack powerpc/64: Make server perfmon only built on ppc64 server devices powerpc/pseries: Fix hvc_vio.c build due to recent changes powerpc: Exporting boot_cpuid_phys powerpc: Add CFAR to oops output hvc_console: Add kdb support powerpc/pseries: Fix hvterm_raw_get_chars to accept < 16 chars, fixing xmon powerpc/irq: Quieten irq mapping printks powerpc: Enable lockup and hung task detectors in pseries and ppc64 defeconfigs powerpc: Add mpt2sas driver to pseries and ppc64 defconfig powerpc: Disable IRQs off tracer in ppc64 defconfig powerpc: Sync pseries and ppc64 defconfigs powerpc/pseries/hvconsole: Fix dropped console output hvc_console: Improve tty/console put_chars handling powerpc/kdump: Fix timeout in crash_kexec_wait_realmode powerpc/mm: Fix output of total_ram. powerpc/cpufreq: Add cpufreq driver for Momentum Maple boards powerpc: Correct annotations of pmu registration functions ... Fix up trivial Kconfig/Makefile conflicts in arch/powerpc, drivers, and drivers/cpufreq
2011-07-22powerpc/85xx: fix mpic configuration in CAMP modeFabio Baltieri
Change the string to check for CAMP mode boot on MPC85xx (eg. P2020) to match the one in the corresponding dts files (p2020rdb_camp_core{0,1}.dts). Without this fix the mpic is configured as in the SMP boot mode, which causes the first core to report a protected source interrupt error for devices of the other core and lock up. Also add MPIC_SINGLE_DEST_CPU on both P2020 based architectures in CAMP mode as suggested by Scott Wood. Thanks. Cc: Scott Wood <scottwood@freescale.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-13drivers/video: use strings to specify the Freescale DIU monitor portTimur Tabi
Instead of using ill-defined numbers (0, 1, and 2) for the monitor port, allow the user to specify the port by name ("dvi", "lvds", or "dlvds"). This works on the kernel command line, the module command-line, and the sysfs "monitor" device. Note that changing the monitor port does not currently work on the P1022DS, because the code that talks to the PIXIS FPGA is broken. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-08powerpc/85xx: Remove stale BUG_ON in mpc85xx_smp_initLaurentiu TUDOR
Under the FSL Hypervisor we triggered a BUG_ON in mpc85xx_smp_init that expected smp_ops.message_pass to be explicity set. However recent changes allows smp_ops.message_pass to be NULL and handled by default code. Thus the BUG_ON isn't relevant anymore. Signed-off-by: Laurentiu TUDOR <Laurentiu.Tudor@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-08powerpc/85xx: Add p2040 RDB board supportMingkai Hu
P2040RDB Specification: ----------------------- 2Gbyte unbuffered DDR3 SDRAM SO-DIMM(64bit bus) 128 Mbyte NOR flash single-chip memory 256 Kbit M24256 I2C EEPROM 16 Mbyte SPI memory SD connector to interface with the SD memory card dTSEC1: connected to the Vitesse SGMII PHY (VSC8221) dTSEC2: connected to the Vitesse SGMII PHY (VSC8221) dTSEC3: connected to the Vitesse SGMII PHY (VSC8221) dTSEC4: connected to the Vitesse RGMII PHY (VSC8641) dTSEC5: connected to the Vitesse RGMII PHY (VSC8641) I2C1: Real time clock, Temperature sensor I2C2: Vcore Regulator, 256Kbit I2C Bus EEPROM SATA: Lanes C and Land D of Bank2 are connected to two SATA connectors UART: supports two UARTs up to 115200 bps for console USB 2.0: connected via a internal UTMI PHY to two TYPE-A interfaces PCIe: - Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT1 - Lanes C and Land D of Bank2 are connected to one x4 PCIe SLOT2 Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/85xx: disable timebase synchronization under the hypervisorTimur Tabi
The Freescale hypervisor does not allow guests to write to the timebase registers (virtualizing the timebase register was deemed too complicated), so don't try to synchronize the timebase registers when we're running under the hypervisor. This typically happens when kexec support is enabled. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/85xx: Add P1010RDB board supportPrabhakar Kushwaha
P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory I2C Board 128x8 bit memory SD/MMC connector to interface with the SD memory card 2 SATA interface 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0 x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN Two DB-9 female connectors for Field bus interface UART DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/85xx: clamp the P1022DS DIU pixel clock to allowed valuesTimur Tabi
To ensure that the DIU pixel clock will not be set to an invalid value, clamp the PXCLK divider to the allowed range (2-255). This also acts as a limiter for the pixel clock. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/e500mc: Add support for the wait instruction in e500_idleScott Wood
e500mc cannot doze or nap due to an erratum (as well as having a different mechanism than previous e500), but it has a "wait" instruction that is similar to doze. On 64-bit, due to the soft-irq-disable mechanism, the existing book3e_idle should be used instead. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/p1022ds: add missing iounmap calls to platform fileTimur Tabi
The platform file for the Freecale P1022DS reference board is not freeing the ioremap() mapping of the PIXIS and global utilities nodes it creates. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-27powerpc/85xx: add board support for the Freescale hypervisorTimur Tabi
Add support for the ePAPR-compliant Freescale hypervisor (aka "Topaz") on the Freescale P3041DS, P4080DS, and P5020DS reference boards. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc/85xx: Add PCI support in 64-bit mode on P5020DSKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc/85xx: Add basic P1023RDS board supportRoy Zang
The P1023 processor is an e500v2 based SoC that utilizes the DPAA networking architecture. This adds basic board support for non-DPAA functionality (device tree, board file, etc). Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc/85xx: Set up doorbells even with no mpicScott Wood
In cases like when the platform is used under hypervisor we will NOT have an MPIC controller but still want doorbells setup. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-22powerpc/85xx: Cleanup PCIe support on corenet_ds boardsKumar Gala
Several changes on PCIe support on P3041DS/P4080DS/P5020DS boards: * Add support for "fsl,qoriq-pcie-v2.2" needed by P3041 & P5020 * Removed support for setting primary_phb_addr as we have no ISA need * Add PCI controller to of_platform_bus_probe (for EDAC) * Cleanup building w/SWIOTLB off on P4080DS (not stricly PCIe related) Signed-off-by: Kai.Jiang <Kai.Jiang@freescale.com> Signed-off-by: Laurentiu TUDOR <Laurentiu.Tudor@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-06-20powerpc: Avoid extra indirect function call in sending IPIsPaul Mackerras
On many platforms (including pSeries), smp_ops->message_pass is always smp_muxed_ipi_message_pass. This changes arch/powerpc/kernel/smp.c so that if smp_ops->message_pass is NULL, it calls smp_muxed_ipi_message_pass directly. This means that a platform doesn't need to set both .message_pass and .cause_ipi, only one of them. It is a slight performance improvement in that it gets rid of an indirect function call at the expense of a predictable conditional branch. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-05 04:22:25 +0000