summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)Author
2005-10-31powerpc: Fix bug arising from having multiple memory_limit variablesPaul Mackerras
We had a static memory_limit in prom.c, and then another one defined in setup_64.c and used in numa.c, which resulted in the kernel crashing when mem=xxx was given on the command line. This puts the declaration in system.h and the definition in mem.c. This also moves the definition of tce_alloc_start/end out of setup_64.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29powerpc: Merge maple support code to arch/powerpc/platforms/maplePaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29[PATCH] chrp_pegasos_eth: Added Marvell Discovery II SRAM supportNicolas DET
Add proper entry to support the Marvell MV64361 (Marvell Discovery II) SRAM. This feature may be used by the mv643xx_eth driver. Signed-off-by: Nicolas DET <det.nicolas@free.fr> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29[PATCH] ppc32: nvram driver for chrpOlaf Hering
This implements a nvram acccess method, similar to arch/ppc64/kernel/pSeries_nvram.c tested on CHRP B50. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28[PATCH] powerpc: Move xics.[ch] into platforms/pseriesDavid Gibson
This patch moves the XICS interrupt controller code into the platforms/pseries directory, since it only appears on pSeries machines. If it ever appears on some other machine we can move it to sysdev, although xics.c itself will need a bunch of changes in that case to remove pSeries specific assumptions. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: Fix new-world powermac detectionPaul Mackerras
My G5 was being reported as an OldWorld in /proc/cpuinfo, which is obviously not right... :) Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: 32-bit CHRP SMP fixesPaul Mackerras
Untested, but "should" work... at least this way it compiles. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge 32-bit CHRP support.Paul Mackerras
SMP still needs more work but UP gets as far as starting userspace at least. This uses the 64-bit-style code for spinning up the cpus. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Don't limit pmac_get_rtc_time to return only positive valuesPaul Mackerras
If the machine's clock is set to a bogus value, this check resulted in userland waiting effectively forever for the RTC value to change, so remove the check. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Pull out MPC106 (grackle) initialization code into its own filePaul Mackerras
This is so that the 32-bit CHRP code can use it. The MPC106 initialization code is now in arch/powerpc/sysdev/grackle.c and is controlled by CONFIG_PPC_MPC106. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge rtas.c into arch/powerpc/kernelPaul Mackerras
This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c, which contains generic RTAS functions useful on any CHRP platform, and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain some pSeries-specific firmware flashing bits. The parts of rtas.c that are to do with pSeries-specific error logging are protected by a new CONFIG_RTAS_ERROR_LOGGING symbol. The inclusion of rtas.o is controlled by the CONFIG_PPC_RTAS symbol, and the relevant platforms select that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge i8259.c into arch/powerpc/sysdevPaul Mackerras
This changes the parameters for i8259_init so that it takes two parameters: a physical address for generating an interrupt acknowledge cycle, and an interrupt number offset. i8259_init now sets the irq_desc[] for its interrupts; all the callers were doing this, and that code is gone now. This also defines a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and makes the platforms that need it select that symbol. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26ppc: Use the indirect_pci.c from arch/powerpc/sysdevPaul Mackerras
This defines a CONFIG_INDIRECT_PCI symbol to control whether it gets used or not, and fixes the Kconfig to select that symbol for platforms that need it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Move ras.c into arch/powerpc/platforms/pseriesMichael Ellerman
ras.o is only built for CONFIG_PPC_PSERIES, so move it into arch/powerpc/platforms/pseries. Update Makefiles to suit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Some minor cleanups to setup_32.cKumar Gala
* Removed of_show_percpuinfo and just report CPU frequency in generic show_cpuinfo code. * Killed OCP and PPC_SYS related code which doesn't belong in the merge tree Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-24powerpc: iseries: Fix a bogus commentStephen Rothwell
A comment in lpevents.c refers to code that's actually in HvCallEvent.h. The code in HvCallEvent.h is pretty obvious, so just remove the comment altogether. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-23powerpc: Run on old powermacs.Paul Mackerras
Old powermacs have a number of differences from current machines: - there is no interrupt tree in the device tree, just interrupt or AAPL,interrupt properties - the chosen node in the device tree is called /chosen@0 - the OF claim method doesn't map the memory, so we have to do an explicit map call as well - there is no /chosen/cpu property on SMP machines - the NVRAM isn't structured as a set of partitions. This adapts the merged powermac support code to cope with these issues. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22Merge changes from linux-2.6 by handPaul Mackerras
2005-10-22ppc64: Use arch/powerpc/platforms/powermac for powermac build.Paul Mackerras
This switches the ARCH=ppc64 build to use arch/powerpc/platforms/powermac instead of arch/ppc64/kernel/pmac*, and deletes the latter set of files. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22powerpc: Merge in 64-bit powermac support.Paul Mackerras
This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to arch/powerpc/platforms/powermac/*.c and makes various minor tweaks elsewhere. On the powermac we now initialize ppc_md by copying the whole pmac_md structure into it, which required some changes in the ordering of initializations of individual fields of it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Fix some bugs in the new merged time codePaul Mackerras
I had the sense of the test for when to use the old 601-style RTC registers inverted. pmac_calibrate_decr and via_calibrate_decr weren't setting ppc_tb_freq, on which all the further calculations depended. Lastly, update_gtod was losing the top 32 bits of the new tb_to_xs value. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc64: Move init_boot_text call and conswitchp init into setup_archPaul Mackerras
This way they get done in one place for all platforms, and it is more consistent with what ppc32 does. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc: rename pci_assign_all_busses to pci_assign_all_busesPaul Mackerras
... for consistency with ppc64 and to make merging easier. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Fix places where ppc_md.show_[per]cpuinfo was treated as intPaul Mackerras
I missed a few places where ppc code was still assuming that the ppc_md.show_[per]cpuinfo functions returned int. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20ppc64: Change ppc_md.get_cpuinfo to ppc_md.show_cpuinfoPaul Mackerras
... for consistency with ppc32; also add in ppc32's show_percpuinfo function. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Merge time.c and asm/time.h.Paul Mackerras
We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19powerpc: Merge machdep.hPaul Mackerras
A few things change for consistency between ppc32 and ppc64: idle functions return void; *_get_boot_time functions return unsigned long (i.e. time_t) rather than filling in a struct rtc_time (since that's useful to the callers and easier for pmac to generate); *_get_rtc_time and *_set_rtc_time functions take a struct rtc_time; irq_canonicalize is gone; nvram_sync returns void. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19ppc: Minor smp changes for consistency with ppc64Paul Mackerras
This makes platform code use the smp_ops variable directly instead of ppc_md.smp_ops, removes the two unused `data' and `wait' arguments from the *_message_pass() functions, and removes the call to the never-implemented smp_ops->space_timers() function. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17ppc32: use L1_CACHE_SHIFT/L1_CACHE_BYTESStephen Rothwell
instead of L1_CACHE_LINE_SIZE and LG_L1_CACHE_LINE_SIZE Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: move iSeries/HvCallPci.h to platforms/iseries/call_pci.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: move iSeries/HvCallHpt.h to platforms/iseries/call_hpt.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: eliminate DsaAddr from pci_dnStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: remove ISERIES_[SUB]BUS macrosStephen Rothwell
This allows us to simplify a couple of things. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14powerpc: move iSeries/iSeries_pci.h to platforms/iseriesStephen Rothwell
The only real user of this file outside platforms/iseries was drivers/net/iseries_veth.c but all it wanted was ISERIES_HV_ADDR() so we move that to abs_addr.h (and lowercase it). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12powerpc: Bring in some changes made to arch/ppc and include/asm-ppc64Paul Mackerras
Recent commits upstream have changed files which are currently duplicated in arch/powerpc and include/asm-powerpc. This updates them with the corresponding changes. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-12Merge from Linus' treePaul Mackerras
2005-10-12powerpc: make iSeries boot againStephen Rothwell
On ARCH=ppc64 we were getting htab_hash_mask recalculated to the correct value for our particular machine by accident. In the merge tree, that code was commented out, so htab_hash_mask was being corrupted. We now set ppc64_pft_size instead which gets htab_has_mask calculated correctly for us later. We should put an ibm,pft-size property in the device tree at some point. Also set -mno-minimal-toc in some makefiles. Allow iSeries to configure PROC_DEVICETREE. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12powerpc: pci_dn's should point to their device_node'sStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-11ppc: Various minor compile fixesPaul Mackerras
This fixes up a variety of minor problems in compiling with ARCH=ppc arising from using the merged versions of various header files. A lot of the changes are just adding #include <asm/machdep.h> to files that use ppc_md or smp_ops_t. This also arranges for us to use semaphore.c, vecemu.c, vector.S and fpu.S from arch/powerpc/kernel when compiling with ARCH=ppc. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11powerpc: Remove xmon.h include from arch/powerpc/platforms/powermac/pic.cPaul Mackerras
... since it isn't needed. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11powerpc: Remove 83xx from arch/powerpc/platforms/Makefile for nowPaul Mackerras
Since we don't have an 83xx directory or a 83xx/Makefile, having 83xx in causes make clean to fail. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Start merging 64-bit support into powermac filesPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Get iseries to compile with ARCH=powerpcPaul Mackerras
This moves the Device_List member from struct device_node to struct pci_dn, which cleans up the device_node and makes the code a little simpler. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: move lparmap.c to arch/powerpc/kernelPaul Mackerras
Since lparmap.s gets included in arch/powerpc/kernel/head_64.S, this avoids depending on a file in another directory. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: rename powermac files to remove pmac_ prefixPaul Mackerras
Since the files are now in arch/powerpc/platforms/powermac, the pmac_ prefix that they had is redundant. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: move pSeries files to arch/powerpc/platforms/pseriesPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-06powerpc: Merge in the ppc64 version of the prom code.Paul Mackerras
This brings in the ppc64 version of prom_init.c, prom.c and btext.c and makes them work for ppc32. This also brings in the new calling convention, where the first entry to the kernel (with r5 != 0) goes to the prom_init code, which then restarts from the beginning (with r5 == 0) after it has done its stuff. For now this also brings in the ppc32 version of setup.c. It also merges lmb.h. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-02Merge rsync://ozlabs.org/sfr-git/for-paulus/Paul Mackerras
2005-10-01powerpc: make iSeries buildStephen Rothwell
Merge vmlinux.lds.S. Also remove arch/powerpc/kernel/vmlinux.lds which is a generated file. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01powerpc: Get merged kernel to compile and run on 32-bit SMP powermac.Paul Mackerras
This updates the powermac SMP code to use the mpic driver instead of the openpic driver and fixes the SMP-dependent context switch code. We had a subtle bug where we were using interrupt numbers 256-259 for IPIs, but ppc32 had NR_IRQS = 256. Moved the IPIs down to use interrupt numbers 252-255 instead. Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-23 01:27:26 +0000