summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/sysdev
AgeCommit message (Collapse)Author
2009-09-22const: make block_device_operations constAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-15Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits) powerpc/nvram: Enable use Generic NVRAM driver for different size chips powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline powerpc/ps3: Workaround for flash memory I/O error powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead powerpc/perf_counters: Reduce stack usage of power_check_constraints powerpc: Fix bug where perf_counters breaks oprofile powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops powerpc/irq: Improve nanodoc powerpc: Fix some late PowerMac G5 with PCIe ATI graphics powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT powerpc/book3e: Add missing page sizes powerpc/pseries: Fix to handle slb resize across migration powerpc/powermac: Thermal control turns system off too eagerly powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan() powerpc/405ex: support cuImage via included dtb powerpc/405ex: provide necessary fixup function to support cuImage powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support. powerpc/44x: Update Arches defconfig powerpc/44x: Update Arches dts ... Fix up conflicts in drivers/char/agp/uninorth-agp.c
2009-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits) netxen: update copyright netxen: fix tx timeout recovery netxen: fix file firmware leak netxen: improve pci memory access netxen: change firmware write size tg3: Fix return ring size breakage netxen: build fix for INET=n cdc-phonet: autoconfigure Phonet address Phonet: back-end for autoconfigured addresses Phonet: fix netlink address dump error handling ipv6: Add IFA_F_DADFAILED flag net: Add DEVTYPE support for Ethernet based devices mv643xx_eth.c: remove unused txq_set_wrr() ucc_geth: Fix hangs after switching from full to half duplex ucc_geth: Rearrange some code to avoid forward declarations phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs drivers/net/phy: introduce missing kfree drivers/net/wan: introduce missing kfree net: force bridge module(s) to be GPL Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded ... Fixed up trivial conflicts: - arch/x86/include/asm/socket.h converted to <asm-generic/socket.h> in the x86 tree. The generic header has the same new #define's, so that works out fine. - drivers/net/tun.c fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that switched over to using 'tun->socket.sk' instead of the redundantly available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks to the TUN driver") which added a new 'tun->sk' use. Noted in 'next' by Stephen Rothwell.
2009-09-05powerpc: Fix i8259 interrupt driver kernel crash on ML510Roderick Colenbrander
This patch fixes a null pointer exception caused by removal of 'ack()' for level interrupts in the Xilinx interrupt driver. A recent change to the xilinx interrupt controller removed the ack hook for level irqs. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-30powerpc/qe: Implement qe_alive_during_sleep() helper functionAnton Vorontsov
In some CPUs (i.e. MPC8569) QE shuts down completely during sleep, drivers may want to know that to reinitialize registers and buffer descriptors. This patch implements qe_alive_during_sleep() helper function, so far it just checks if MPC8569-compatible power management controller is present, which is a sign that QE turns off during sleep. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-25powerpc/qe_lib: Set gpio data before changing the direction to outputMichael Barkowski
This avoids having a short glitch if the desired initial value is not the same as what was previously in the data register. Signed-off-by: Michael Barkowski <michaelbarkowski@ruggedcom.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24powerpc/85xx: issue fsl_soc reboot warning only when applicablePaul Gortmaker
Some CPU, like the MPC8560 don't have a RSTCR in the Global Utilities Block. These boards will implement their own reboot call, and not use this code, so we should only warn about the absence of the GUTS RSTCR when the default reboot code is used. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-20powerpc/nvram: Allow byte length reads from mmio NVRAM driverMartyn Welch
Add a byte length read and write interface compatible with the nvram_generic driver interface to the mmio driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/qe: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/ipic: introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/ipic: unmask all interrupt sourcesSebastian Andrzej Siewior
in case the interrupt controller was used in an earlier life then it is possible it is that some of its sources were used and are still unmask. If the (unmasked) device is active and is creating interrupts (or one interrupts was pending since the interrupts were disabled) then the boot process "ends" very soon. Once external interrupts are enabled, we land in -> do_IRQ -> call ppc_md.get_irq() -> ipic_read() gets the source number -> irq_linear_revmap(source) -> revmap[source] == NO_IRQ -> irq_find_mapping(source) returns NO_IRQ because no source is registered -> source is NO_IRQ, ppc_spurious_interrupts gets incremented, no further action. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/fsl_rio: Add kmalloc NULL testsJulia Lawall
Check that the result of kmalloc/kzalloc is not NULL before dereferencing it. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/mpic: Fix MPIC_BROKEN_REGREAD on non broken MPICsMichael Ellerman
The workaround enabled by CONFIG_MPIC_BROKEN_REGREAD does not work on non-broken MPICs. The symptom is no interrupts being received. The fix is twofold. Firstly the code was broken for multiple isus, we need to index into the shadow array with the src_no, not the idx. Secondly, we always do the read, but only use the VECPRI_MASK and VECPRI_ACTIVITY bits from the hardware, the rest of "val" comes from the shadow. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Don't use alloc_bootmem() in init_IRQ() pathAnton Vorontsov
This patch fixes various badnesses like this for all interrupt controllers: ------------[ cut here ]------------ Badness at c04db9dc [verbose debug info unavailable] NIP: c04db9dc LR: c04db9ac CTR: 00000000 REGS: c053de30 TRAP: 0700 Not tainted (2.6.31-rc1-00432-ge69b2b5-dirty) MSR: 00021000 <ME,CE> CR: 22020084 XER: 00000000 TASK = c0500480[0] 'swapper' THREAD: c053c000 GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000 GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000 GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4 GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050 NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74 LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74 Call Trace: [c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable) [c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108 [c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50 [c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0 [c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c [c053dfb0] [c04cf374] init_IRQ+0x28/0x3c p.s. commit 85355bb272db31a3f2dd99d547eef794805e1319 ("powerpc: Fix mpic alloc warning") missed some alloc_bootmem() instances, this is now fixed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt
2009-06-26powerpc: Fix mpic alloc warningKumar Gala
Since we can use kmalloc earlier we are getting the following since the mpic_alloc() code calls alloc_bootmem(). Move to using kzalloc() to remove the warning. ------------[ cut here ]------------ Badness at c0583248 [verbose debug info unavailable] NIP: c0583248 LR: c0583210 CTR: 00000004 REGS: c0741de0 TRAP: 0700 Not tainted (2.6.30-06736-g12a31df) MSR: 00021000 <ME,CE> CR: 22024024 XER: 00000000 TASK = c070d3b8[0] 'swapper' THREAD: c0740000 CPU: 0 <6>GPR00: 00000001 c0741e90 c070d3b8 00000001 00000210 00000020 3fffffff 00000000 <6>GPR08: 00000000 c0c85700 c04f8c40 0000002d 22044022 1004a388 7ffd9400 00000000 <6>GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c04f8c40 00000000 c059f62c c075a0c0 <6>GPR24: c059f648 00000000 0000000f 00000210 00000020 00000000 3fffffff 00000210 NIP [c0583248] alloc_arch_preferred_bootmem+0x50/0x80 LR [c0583210] alloc_arch_preferred_bootmem+0x18/0x80 Call Trace: [c0741e90] [c07343b0] devtree_lock+0x0/0x24 (unreliable) [c0741ea0] [c0583b14] ___alloc_bootmem_nopanic+0x54/0x108 [c0741ee0] [c0583e18] ___alloc_bootmem+0x18/0x50 [c0741ef0] [c057b9cc] mpic_alloc+0x48/0x710 [c0741f40] [c057ecf4] mpc85xx_ds_pic_init+0x190/0x1b8 [c0741f90] [c057633c] init_IRQ+0x24/0x34 [c0741fa0] [c05738b8] start_kernel+0x260/0x3dc [c0741ff0] [c00003c8] skpinv+0x2e0/0x31c Instruction dump: 409e001c 7c030378 80010014 83e1000c 38210010 7c0803a6 4e800020 3d20c0c8 39295700 80090004 7c000034 5400d97e <0f000000> 2f800000 409e001c 38800000 BenH: Changed to use GFP_KERNEL, the allocator will do the right thing Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26powerpc/mpic: Fix mapping of "DCR" based MPIC variantsBenjamin Herrenschmidt
Commit 31207dab7d2e63795eb15823947bd2f7025b08e2 "Fix incorrect allocation of interrupt rev-map" introduced a regression crashing on boot on machines using a "DCR" based MPIC, such as the Cell blades. The reason is that the irq host data structure is initialized much later as a result of that patch, causing our calls to mpic_map() do be done before we have a host setup. Unfortunately, this breaks _mpic_map_dcr() which uses the mpic->irqhost to get to the device node. This fixes it by, instead, passing the device node explicitely to mpic_map(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Akira Tsukamoto <akirat@rd.scei.sony.co.jp>
2009-06-23powerpc/qe: add polling timeout to qe_issue_cmd()Timur Tabi
The qe_issue_cmd() function (Freescale PowerPC QUICC Engine library) polls on a register until a status bit changes, but does not include a timeout to handle the situation if the bit never changes. Change the code to use the new spin_event_timeout() macro, which simplifies polling on a register without a timeout. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-17powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() functionWolfgang Denk
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-16powerpc: Add configurable -Werror for arch/powerpcMichael Ellerman
Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-12Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Manual merge of: arch/powerpc/kernel/asm-offsets.c
2009-06-11Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
2009-06-06powerpc/virtex: Add Xilinx ML510 reference design supportRoderick Colenbrander
Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-06powerpc/virtex: refactor intc driver and add support for i8259 cascadingGrant Likely
This patch refactors some of the xilinx_intc interrupt controller driver and adds support for cascading an i8259 off one of the irq lines. This patch was based on the ML510 support work done by Roderick Colenbrander. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-06powerpc/virtex: Add support for Xilinx PCI host bridgeRoderick Colenbrander
This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host bridge IPcore. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-01Merge branch 'linus' into irq/numaIngo Molnar
Conflicts: arch/mips/sibyte/bcm1480/irq.c arch/mips/sibyte/sb1250/irq.c Merge reason: we gathered a few conflicts plus update to latest upstream fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22block: Do away with the notion of hardsect_sizeMartin K. Petersen
Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-21powerpc/pci: Clean up direct access to sysdata on tsi108 platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by 4xx platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by FSL platformsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/pci: Clean up direct access to sysdata by indirect opsKumar Gala
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc/mpic: Cleanup mpic_find() implementationTony Breeds
mpic_find() was overloaded to do two things, finding the mpic instance for a given interrupt and returning if it's an IPI. Instead we introduce mpic_is_ipi() and simplify mpic_find() to just return the mpic instance Also silences the warning: arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_set_priority': arch/powerpc/sysdev/mpic.c:1382: warning: 'is_ipi' may be used uninitialized in this function Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-19powerpc/fsl: Setup PCI inbound window based on actual amount of memoryKumar Gala
Previouslly we just always set the inbound window to 2G. This was broken for systems with >2G. If a system has >=4G we will need SWIOTLB support to handle that case. We now allocate PCICSRBAR/PEXCSRBAR right below the lowest PCI outbound address for MMIO or the 4G boundary (if the lowest PCI address is above 4G). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/85xx: Add P2020DS board supportKumar Gala
The P2020 is a dual e500v2 core based SOC with: * 3 PCIe controllers * 2 General purpose DMA controllers * 2 sRIO controllers * 3 eTSECS * USB 2.0 * SDHC * SPI, I2C, DUART * enhanced localbus * and optional Security (P2020E) security w/XOR acceleration The p2020 DS reference board is pretty similar to the existing MPC85xx DS boards and has a ULI 1575 connected on one of the PCIe controllers. Signed-off-by: Ted Peters <Ted.Peters@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl_rio: use LAW address from device treeLi Yang
Instead of fixed address in old code. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl_rio: Fix compile warningsKumar Gala
We we build with resource_size_t as a 64-bit quantity we get: arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_setup': arch/powerpc/sysdev/fsl_rio.c:1029: warning: format '%08x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' arch/powerpc/sysdev/fsl_rio.c:1029: warning: format '%08x' expects type 'unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl: Support unique MSI addresses per PCIe Root ComplexKumar Gala
Its feasible based on how the PCI address map is setup that the region of PCI address space used for MSIs differs for each PHB on the same SoC. Instead of assuming that the address mappes to CCSRBAR 1:1 we read PEXCSRBAR (BAR0) for the PHB that the given pci_dev is on. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/85xx: Add PCI IDs for MPC8569 family processorsAnton Vorontsov
This patch adds PCI IDs for MPC8569 and MPC8569E processors, plus adds appropriate quirks for these IDs, and thus makes PCI-E actually work on MPC8569E-MDS boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/qe: update QE Serial NumberHaiying Wang
The latest QE chip may have more Serial Number(SNUM)s of thread to use. We will get the number of SNUMs from device tree by reading the new property "fsl,qe-num-snums", and set 28 as the default number of SNUMs so that it is compatible with the old QE chips' device trees which don't have this new property. The macro QE_NUM_OF_SNUM is defined as the maximum number in QE snum table which is 256. Also we update the snum_init[] array with 18 more new SNUMs which are confirmed to be useful on new chip. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/qe: update risc allocation for QEHaiying Wang
Change the RISC allocation to macros instead of enum, add function to read the number of risc engines from the new property "fsl,qe-num-riscs" under the qe node in dts. Add new property "fsl,qe-num-riscs" description in qe.txt Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/cpm: Remove some cruft code and definesKumar Gala
Kill of some old defines and macros that we no longer use like CPM_MAP_ADDR and CPM_IRQ_OFFSET. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc: make dma_window_* in pci_controller struct avail on 32bBecky Bruce
Also, convert them to resource_size_t (which is unsigned long on 64-bit, so it's not a change there). We will be using these on fsl 32b to indicate the start and size address of memory that the pci controller can actually reach - this is needed to determine if an address requires bounce buffering. For now, initialize them to a standard value; in the near future, the value will be calculated based on how the inbound windows are programmed. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: Ben Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19powerpc/fsl: use of_iomap() for rstcr mappingKumar Gala
The rstcr register mapping code was written sometime ago before of_iomap() existed. We can use it and clean up the code a bit and get rid of one user of get_immrbase() in the process. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-15powerpc/mpic: Fix incorrect allocation of interrupt rev-mapKumar Gala
Before when we were setting up the irq host map for mpic we passed in just isu_size for the size of the linear map. However, for a number of mpic implementations we have no isu (thus pass in 0) and will end up with a no linear map (size = 0). This causes us to always call irq_find_mapping() from mpic_get_irq(). By moving the allocation of the host map to after we've determined the number of sources we can actually benefit from having a linear map for the non-isu users that covers all the interrupt sources. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-14powerpc/virtex: Fix duplicate level irq events.John Linn
The interrupt controller was not handling level interrupts correctly such that duplicate interrupts were happening. This fixes the problem and adds edge type interrupts which are needed in Xilinx hardware. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-05-08powerpc/fsl_soc: Remove mpc83xx_wdt_init, againAnton Vorontsov
commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver"), possibly due merge issues, reintroduced completely unneded mpc83xx_wdt_init call, which I removed some time ago in commit 20d38e01d48019c578ab0ec1464454c0 ("powerpc/fsl_soc: remove mpc83xx_wdt code"). Remove it once again. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-06irq: change ->set_affinity() to return status, fixIngo Molnar
This build failure: arch/powerpc/sysdev/mpic.c:810: error: conflicting types for 'mpic_set_affinity' arch/powerpc/sysdev/mpic.h:39: error: previous declaration of 'mpic_set_affinity' was here make[2]: *** [arch/powerpc/sysdev/mpic.o] Error 1 make[2]: *** Waiting for unfinished jobs.... Triggers because the function prototype was not updated when the function call signature got changed by: d5dedd4: irq: change ->set_affinity() to return status [ Impact: build fix on powerpc ] Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28irq: change ->set_affinity() to return statusYinghai Lu
according to Ingo, change set_affinity() in irq_chip should return int, because that way we can handle failure cases in a much cleaner way, in the genirq layer. v2: fix two typos [ Impact: extend API ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-22Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into mergePaul Mackerras