summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2010-02-13powerpc/85xx: Fix SMP when "cpu-release-addr" is in lowmemPeter Tyser
Recent U-Boot commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb caused the "cpu-release-addr" device tree property to contain the physical RAM location that secondary cores were spinning at. Previously, the "cpu-release-addr" property contained a value referencing the boot page translation address range of 0xfffffxxx, which then indirectly accessed RAM. The "cpu-release-addr" is currently ioremapped and the secondary cores kicked. However, due to the recent change in "cpu-release-addr", it sometimes points to a memory location in low memory that cannot be ioremapped. For example on a P2020-based board with 512MB of RAM the following error occurs on bootup: <...> mpic: requesting IPIs ... __ioremap(): phys addr 0x1ffff000 is RAM lr c05df9a0 Unable to handle kernel paging request for data at address 0x00000014 Faulting instruction address: 0xc05df9b0 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2 P2020 RDB Modules linked in: <... eventual kernel panic> Adding logic to conditionally ioremap or access memory directly resolves the issue. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Nate Case <ncase@xes-inc.com> Reported-by: Dipen Dudhat <B09055@freescale.com> Tested-by: Dipen Dudhat <B09055@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-13powerpc/85xx: Fix oops during MSI driver probe on MPC85xxMDS boardsAnton Vorontsov
MPC85xx chips report the wrong value in feature reporting register, and that causes the following oops: Unable to handle kernel paging request for data at address 0x00000c00 Faulting instruction address: 0xc0019294 Oops: Kernel access of bad area, sig: 11 [#1] MPC8569 MDS Modules linked in: [...] NIP [c0019294] mpic_set_irq_type+0x2f0/0x368 LR [c0019124] mpic_set_irq_type+0x180/0x368 Call Trace: [ef851d60] [c0019124] mpic_set_irq_type+0x180/0x368 (unreliable) [ef851d90] [c007958c] __irq_set_trigger+0x44/0xd4 [ef851db0] [c007b550] set_irq_type+0x40/0x7c [ef851dc0] [c0004a60] irq_create_of_mapping+0xb4/0x114 [ef851df0] [c0004af0] irq_of_parse_and_map+0x30/0x40 [ef851e20] [c0405678] fsl_of_msi_probe+0x1a0/0x328 [ef851e60] [c02e6438] of_platform_device_probe+0x5c/0x84 [...] This is because mpic_alloc() assigns wrong values to mpic->isu_{size,shift,mask}, and things eventually break when _mpic_irq_read() is trying to use them. This patch fixes the issue by enabling MPIC_BROKEN_FRR_NIRQS quirk. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-02-10powerpc: Fix address masking bug in hpte_need_flush()David Gibson
Commit f71dc176aa06359681c30ba6877ffccab6fba3a6 'Make hpte_need_flush() correctly mask for multiple page sizes' introduced bug, which is triggered when a kernel with a 64k base page size is run on a system whose hardware does not 64k hash PTEs. In this case, we emulate 64k pages with multiple 4k hash PTEs, however in hpte_need_flush() we incorrectly only mask the hardware page size from the address, instead of the logical page size. This causes things to go wrong when we later attempt to iterate through the hardware subpages of the logical page. This patch corrects the error. It has been tested on pSeries bare metal by Michael Neuling. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-08powerpc/pseries: Fix kexec regression caused by CPPR trackingMark Nelson
The code to track the CPPR values added by commit 49bd3647134ea47420067aea8d1401e722bf2aac ("powerpc/pseries: Track previous CPPR values to correctly EOI interrupts") broke kexec on pseries because the kexec code in xics.c calls xics_set_cpu_priority() before the IPI has been EOI'ed. This wasn't a problem previously but it now triggers a BUG_ON in xics_set_cpu_priority() because os_cppr->index isn't 0. Fix this problem by setting the index on the CPPR stack to 0 before calling xics_set_cpu_priority() in xics_teardown_cpu(). Also make it clear that we only want to set the priority when there's just one CPPR value in the stack, and enforce it by updating the value of os_cppr->stack[0] rather than os_cppr->stack[os_cppr->index]. While we're at it change the BUG_ON to a WARN_ON. Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-01powerpc: TIF_ABI_PENDING bit removalAndreas Schwab
Here are the powerpc bits to remove TIF_ABI_PENDING now that set_personality() is called at the appropriate place in exec. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-01powerpc/pseries: Fix xics build without CONFIG_SMPBenjamin Herrenschmidt
desc->affinity doesn't exit in that case. Let's use a macro for the UP variant of get_irq_server(), it's the easiest way, avoids evaluating arguments. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-29Merge commit 'jwb/merge' into mergeBenjamin Herrenschmidt
2010-01-29powerpc/4xx: Add pcix type 1 transactionsStef van Os
Some of the newer 4xx pci cores need an explicit bit set to send type 1 transactions instead of just comparing the bus numbers. This patch enables type 1 transations for pcix nodes, thus enabling devices behind PCI bridges. Signed-off-by: Stef van Os <stef.van.os@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-29powerpc/pci: Add missing call to header fixupBenjamin Herrenschmidt
Add missing call to pci_fixup_device(pci_fixup_early, ...) when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-29powerpc/pci: Add missing hookup to pci_slotBenjamin Herrenschmidt
Add missing hookup to existing pci_slot when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-29powerpc/pci: Add calls to set_pcie_port_type() and set_pcie_hotplug_bridge()Benjamin Herrenschmidt
We are missing these when building the pci_dev from scratch off the Open Firmware device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-01-25KVM: powerpc: Show timing option only on embeddedAlexander Graf
Embedded PowerPC KVM has an exit timing implementation to track and evaluate how much time was spent in which exit path. For Book3S, we don't implement it. So let's not expose it as a config option either. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-15Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2010-01-15Merge commit 'kumar/merge' into mergeBenjamin Herrenschmidt
2010-01-15powerpc: Move cpu hotplug driver lock from pseries to powerpcNathan Fontenot
Move the defintion and lock helper routines for the cpu hotplug driver lock from pseries to powerpc code to avoid build breaks for platforms other than pseries that use cpu hotplug. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc: Move /proc/ppc64 to /proc/powerpc updateNathan Fontenot
It looks like the previous patch sent out to move RTAS and other items from /proc/ppc64 to /proc/powerpc missed a few files needed for RAS and DLPAR functionality. Original Patch here: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-September/076096.html This patch updates the remaining files to be created under /proc/powerpc. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/8xx: Fix user space TLB walk in dcbX fixupJoakim Tjernlund
The newly added fixup for buggy dcbX insn's has a bug that always trigger a kernel TLB walk so a user space dcbX insn will cause a Kernel Machine Check if it hits DTLB error. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc: Fix decrementer setup on 1GHz boardsStefan Roese
We noticed that recent kernels didn't boot on our 1GHz Canyonlands 460EX boards anymore. As it seems, patch 8d165db1 [powerpc: Improve decrementer accuracy] introduced this problem. The routine div_sc() overflows with shift = 32 resulting in this incorrect setup: time_init: decrementer frequency = 1000.000012 MHz time_init: processor frequency = 1000.000012 MHz clocksource: timebase mult[400000] shift[22] registered clockevent: decrementer mult[33] shift[32] cpu[0] This patch now introduces a local div_dc64() version of this function so that this overflow doesn't happen anymore. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Detlev Zundel <dzu@denx.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/iseries: Initialise on-stack completionMichael Ellerman
get_viotape_info() declares a vio_waitevent on the stack, which contains a completion, but never initialises the completion. I have no idea how this ever worked, and on recent kernels it causes an oops in handle_tape_event() when we access the non-initialised completion. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc: Use helpers for rlimitsJiri Slaby
Make sure compiler won't do weird things with limits. E.g. fetching them twice may return 2 different values after writable limits are implemented. I.e. either use rlimit helpers added in 3e10e716abf3c71bdb5d86b8f507f9e72236c9cd or ACCESS_ONCE if not applicable. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc: cpumask_of_node() should handle -1 as a nodeAnton Blanchard
pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREEFUJITA Tomonori
cc1: warnings being treated as errors arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_attach_node': arch/powerpc/platforms/pseries/dlpar.c:239: error: unused variable 'ent' arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_detach_node': arch/powerpc/platforms/pseries/dlpar.c:271: error: unused variable 'prop' arch/powerpc/platforms/pseries/dlpar.c:270: error: unused variable 'parent' make[3]: *** [arch/powerpc/platforms/pseries/dlpar.o] Error 1 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/pseries: Fix xics interrupt affinityAnton Blanchard
Commit 57b150cce8e004ddd36330490a68bfb59b7271e9 (irq: only update affinity if ->set_affinity() is sucessfull) broke xics irq affinity. We need to use the cpumask passed in, instead of accessing ->affinity directly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/swsusp_32: Fix TLB invalidationAnton Vorontsov
It seems there is a thinko in the TLB invalidation code that makes the tlbie in the loop executed just once. The intended check was probably 'gt', not 'lt'. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15powerpc/8xx: Always pin kernel instruction TLBJoakim Tjernlund
Various kernel asm modifies SRR0/SRR1 just before executing a rfi. If such code crosses a page boundary you risk a TLB miss which will clobber SRR0/SRR1. Avoid this by always pinning kernel instruction TLB space. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-13zlib: Fix build of powerpc boot wrapperBenjamin Herrenschmidt
Commit ac4c2a3bbe5db5fc570b1d0ee1e474db7cb22585 broke the build of all powerpc boot wrappers. It attempts to add an include of autoconf.h but used the wrong path for it. It also adds -D__KERNEL__ to our boot wrapper, both things that we pretty much didn't do on purpose so far. We want our boot wrapper to remain independent enough of the kernel for various reasons, one of them being that you can "wrap" an existing kernel at distro install time which allows to ship one kernel image and a set of boot wrappers for different platforms, the wrappers don't have to be built out of the same kernel build tree. It's also incorrect to do what the patch does in our boot environment since we may not have a proper alignment exception handler which means we may not be able to fixup the few cases where an unaligned access will need SW emulation (depends on the core variant, could be when crossing page or segment boundaries for example). This patch fixes it by putting the old code back in and using the new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set, which happens not to be set on powerpc since we don't include autoconf.h. It also reverts the changes to our boot wrapper Makefile. This means that x86 should, afaik, keep the optimisations since its boot wrapper does include autoconf.h and define __KERNEL__ (though I doubt they make that much different outside of slow embedded processors). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-11zlib: optimize inffast when copying direct from outputJoakim Tjernlund
JFFS2 uses lesser compression ratio and inflate always ends up in "copy direct from output" case. This patch tries to optimize the direct copy procedure. Uses get_unaligned() but only in one place. The copy loop just above this one can also use this optimization, but I havn't done so as I have not tested if it is a win there too. On my MPC8321 this is about 17% faster on my JFFS2 root FS than the original. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-06powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxxKumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-04powerpc/40x: Update the PowerPC 40x board defconfigsJosh Boyer
Update the 40x defconfigs for 2.6.33 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-01-04powerpc/44x: Update PowerPC 44x board defconfigsJosh Boyer
Update the 44x defconfig files for 2.6.33 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-12-30powerpc: Use scripts/mkuboot.sh instead of 'mkimage'Peter Tyser
mkuboot.sh provides a basic wrapper for the 'mkimage' utility. Using mkuboot.sh provides clearer error reporting and allows a toolchain to use its own 'mkimage' executable specified by ${CROSS_COMPILE}mkimage. Additionally, this brings PowerPC in line with other architectures which already call mkimage via mkuboot.sh. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-30powerpc/5200: update defconfigsGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/cardbus: Add a fixup hook and fix powerpc PCI: change PCI nomenclature in drivers/pci/ (non-comment changes) PCI: change PCI nomenclature in drivers/pci/ (comment changes) PCI: fix section mismatch on update_res() PCI: add Intel 82599 Virtual Function specific reset method PCI: add Intel USB specific reset method PCI: support device-specific reset methods PCI: Handle case when no pci device can provide cache line size hint PCI/PM: Propagate wake-up enable for PCIe devices too vgaarbiter: fix a typo in the vgaarbiter Documentation
2009-12-27KVM: powerpc: Fix mtsrin in book3s_64 mmuAlexander Graf
We were shifting the Ks/Kp/N bits one bit too far on mtsrin. It took me some time to figure that out, so I also put in some debugging and a comment explaining the conversion. This fixes current OpenBIOS boot on PPC64 KVM. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-21powerpc/gc/wii: Remove get_irq_desc()Albert Herranz
Fix the following build failures: arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_map': arch/powerpc/platforms/embedded6xx/flipper-pic.c:105: error: implicit declaration of function 'get_irq_desc' arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_map': arch/powerpc/platforms/embedded6xx/hlwd-pic.c:98: error: implicit declaration of function 'get_irq_desc' These failures are caused by the changes introduced in commit "powerpc: Remove get_irq_desc()". The reason these drivers were not updated is that they weren't merged yet. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-21powerpc/gc/wii: hlwd-pic: convert irq_desc.lock to raw_spinlockAlbert Herranz
Fix the following build failures: arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_irq_cascade': arch/powerpc/platforms/embedded6xx/hlwd-pic.c:135: error: passing argument 1 of 'spin_lock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:137: error: passing argument 1 of 'spin_unlock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:145: error: passing argument 1 of 'spin_lock' from incompatible pointer type arch/powerpc/platforms/embedded6xx/hlwd-pic.c:149: error: passing argument 1 of 'spin_unlock' from incompatible pointer type These failures are caused by the changes introduced in commit "genirq: Convert irq_desc.lock to raw_spinlock". The reason this driver was not updated is that it wasn't merged yet. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-21Merge commit 'jwb/next' into mergeBenjamin Herrenschmidt
2009-12-21Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt
2009-12-18powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbgAlbert Herranz
The retry logic in ug_putc() is broken. If the TX fifo is not ready and the counter runs out it will have a value of -1 and no transfer should be attempted. Also, a counter with a value of 0 means that the TX fifo got ready in the last try and the transfer should be attempted. Reported-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/mpic: Fix problem that affinity is not updatedYang Li
Since commit 57b150cce8e004ddd36330490a68bfb59b7271e9, desc->affinity of an irq is changed after calling desc->chip->set_affinity. Therefore we need to fix the irq_choose_cpu() not to depend on the desc->affinity for new mask. Signed-off-by: Jiajun Wu <b06378@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/mm: Fix stupid bug in subpge protection handlingDavid Gibson
Commit d28513bc7f675d28b479db666d572e078ecf182d ("Fix bug in pagetable cache cleanup with CONFIG_PPC_SUBPAGE_PROT"), itself a fix for breakage caused by an earlier clean up patch of mine, contains a stupid bug. I changed the parameters of the subpage_protection() function, but failed to update one of the callers. This patch fixes it, and replaces a void * with a typed pointer so that the compiler will warn on such an error in future. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/iseries: use DECLARE_COMPLETION_ONSTACK for non-constant completionYong Zhang
The _ONSTACK variant should be used for on-stack completion, otherwise it will break lockdep. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc: Fix MSI support on U4 bridge PCIe slotBenjamin Herrenschmidt
On machines using the Apple U4 bridge (AKA IBM CPC945) PCIe interface such as the latest generation G5 machines x16 slot or the x16 slot of the PowerStation, MSIs are currently broken (and will oops when enabling). This fixes the oops and implements proper support for those. Instead of using the PCIe <-> HT bridge conversion, on such slots we need to use a bunch of magic registers in the bridge as the MSI target, encoding the interrupt number in the low bits of the address itself Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc: Handle VSX alignment faults correctly in little-endian modeNeil Campbell
This patch fixes the handling of VSX alignment faults in little-endian mode (the current code assumes the processor is in big-endian mode). The patch also makes the handlers clear the top 8 bytes of the register when handling an 8 byte VSX load. This is based on 2.6.32. Signed-off-by: Neil Campbell <neilc@linux.vnet.ibm.com> Cc: <stable@kernel.org> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/mm: Fix typo of cpumask_clear_cpu()Yang Li
The function name of cpumask_clear_cpu was not correct. Fortunately nobody uses that code with hotplug yet :-) Reported-by: Jin Qing <b24347@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/mm: Fix hash_utils_64.c compile errors with DEBUG enabled.Sachin P. Sant
This time without the funny characters. Fix following build errors generated with DEBUG=1 cc1: warnings being treated as errors arch/powerpc/mm/hash_utils_64.c: In function 'htab_dt_scan_page_sizes': arch/powerpc/mm/hash_utils_64.c:343: error: format '%04x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' arch/powerpc/mm/hash_utils_64.c:343: error: format '%08x' expects type 'unsigned int', but argument 5 has type 'long unsigned int' arch/powerpc/mm/hash_utils_64.c: In function 'htab_initialize': arch/powerpc/mm/hash_utils_64.c:666: error: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' ... SNIP ... Signed-off-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc: Convert BUG() to use unreachable()David Daney
Use the new unreachable() macro instead of for(;;); Signed-off-by: David Daney <ddaney@caviumnetworks.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: linuxppc-dev@ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/pseries: Make declarations of cpu_hotplug_driver_lock() ANSI compatible.Gautham R Shenoy
And add the __acquires() and __releases() annotations, while at it. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/pseries: Don't panic when H_PROD fails during cpu-online.Gautham R Shenoy
If an online-attempt on a CPU which has been offlined using H_CEDE with an appropriate cede latency hint fails, don't panic. Instead print the error message and let the __cpu_up() code notify the CPU Hotplug framework of the failure, which in turn can notify the other subsystem through CPU_UP_CANCELED. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18powerpc/mm: Fix a WARN_ON() with CONFIG_DEBUG_PAGEALLOC and CONFIG_DEBUG_VMBenjamin Herrenschmidt
Set need to call __set_pte_at() and not set_pte_at() from __change_page_attr() since the later will perform checks with CONFIG_DEBUG_VM that aren't suitable to the way we override an existing PTE. (More specifically, it doesn't let you write over a present PTE). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 17:14:21 +0000