summaryrefslogtreecommitdiffstats
path: root/arch/s390
AgeCommit message (Collapse)Author
2011-11-02Merge branch 'akpm' (Andrew's incoming - part two)Linus Torvalds
Says Andrew: "60 patches. That's good enough for -rc1 I guess. I have quite a lot of detritus to be rechecked, work through maintainers, etc. - most of the remains of MM - rtc - various misc - cgroups - memcg - cpusets - procfs - ipc - rapidio - sysctl - pps - w1 - drivers/misc - aio" * akpm: (60 commits) memcg: replace ss->id_lock with a rwlock aio: allocate kiocbs in batches drivers/misc/vmw_balloon.c: fix typo in code comment drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop w1: disable irqs in critical section drivers/w1/w1_int.c: multiple masters used same init_name drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal drivers/power/ds2780_battery.c: add a nolock function to w1 interface drivers/power/ds2780_battery.c: create central point for calling w1 interface w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it pps gpio client: add missing dependency pps: new client driver using GPIO pps: default echo function include/linux/dma-mapping.h: add dma_zalloc_coherent() sysctl: make CONFIG_SYSCTL_SYSCALL default to n sysctl: add support for poll() RapidIO: documentation update drivers/net/rionet.c: fix ethernet address macros for LE platforms RapidIO: fix potential null deref in rio_setup_device() RapidIO: add mport driver for Tsi721 bridge ...
2011-11-02thp: share get_huge_page_tail()Andrea Arcangeli
This avoids duplicating the function in every arch gup_fast. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02s390: gup_huge_pmd() return 0 if pte changesAndrea Arcangeli
s390 didn't return 0 in that case, if it's rolling back the *nr pointer it should also return zero to avoid adding pages to the array at the wrong offset. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02s390: gup_huge_pmd() support THP tail recountingAndrea Arcangeli
Up to this point the code assumed old refcounting for hugepages (pre-thp). This updates the code directly to the thp mapcount tail page refcounting. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02filesystems: add set_nlink()Miklos Szeredi
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-11-02filesystems: add missing nlink wrappersMiklos Szeredi
Replace direct i_nlink updates with the respective updater function (inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-11-02hypfs: remove unnecessary nlink settingMiklos Szeredi
alloc_inode() initializes i_nlink to 1. Remove unnecessary re-initialization. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-31Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (54 commits) [S390] Remove error checking from copy_oldmem_page() [S390] qdio: prevent dsci access without adapter interrupts [S390] irqstats: split IPI interrupt accounting [S390] add missing __tlb_flush_global() for !CONFIG_SMP [S390] sparse: fix sparse symbol shadow warning [S390] sparse: fix sparse NULL pointer warnings [S390] sparse: fix sparse warnings with __user pointers [S390] sparse: fix sparse warnings in math-emu [S390] sparse: fix sparse warnings about missing prototypes [S390] sparse: fix sparse ANSI-C warnings [S390] sparse: fix sparse static warnings [S390] sparse: fix access past end of array warnings [S390] dasd: prevent path verification before resume [S390] qdio: remove multicast polling [S390] qdio: reset outbound SBAL error states [S390] qdio: EQBS retry after CCQ 96 [S390] qdio: add timestamp for last queue scan time [S390] Introduce get_clock_fast() [S390] kvm: Handle diagnose 0x10 (release pages) [S390] take mmap_sem when walking guest page table ...
2011-10-30Merge branch 'kvm-updates/3.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (75 commits) KVM: SVM: Keep intercepting task switching with NPT enabled KVM: s390: implement sigp external call KVM: s390: fix register setting KVM: s390: fix return value of kvm_arch_init_vm KVM: s390: check cpu_id prior to using it KVM: emulate lapic tsc deadline timer for guest x86: TSC deadline definitions KVM: Fix simultaneous NMIs KVM: x86 emulator: convert push %sreg/pop %sreg to direct decode KVM: x86 emulator: switch lds/les/lss/lfs/lgs to direct decode KVM: x86 emulator: streamline decode of segment registers KVM: x86 emulator: simplify OpMem64 decode KVM: x86 emulator: switch src decode to decode_operand() KVM: x86 emulator: qualify OpReg inhibit_byte_regs hack KVM: x86 emulator: switch OpImmUByte decode to decode_imm() KVM: x86 emulator: free up some flag bits near src, dst KVM: x86 emulator: switch src2 to generic decode_operand() KVM: x86 emulator: expand decode flags to 64 bits KVM: x86 emulator: split dst decode to a generic decode_operand() KVM: x86 emulator: move memop, memopp into emulation context ...
2011-10-30[S390] Remove error checking from copy_oldmem_page()Michael Holzheu
Currently it can happen that the pre-allocated ELF header contains a wrong memory map which would result in errors when copying /proc/vmcore. In order to still get a valid vmcore, we (temporarily) disable the error checking in copy_oldmem_page(). This will then produce zero pages for those memory regions. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] irqstats: split IPI interrupt accountingHeiko Carstens
We use both the external call and emergency call IPIs to signal remote cpus. Therefore it makes sense to account them differently withing /proc/irqstats so we actually know what happened. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] add missing __tlb_flush_global() for !CONFIG_SMPJan Glauber
Fix this compiler error for !CONFIG_SMP: CC arch/s390/mm/pgtable.o arch/s390/mm/pgtable.c: In function ‘gmap_flush_tlb’: arch/s390/mm/pgtable.c:202:3: error: implicit declaration of function ‘__tlb_flush_global’ [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse warnings with __user pointersMartin Schwidefsky
Use __force to quiet sparse warnings about user address space. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse warnings in math-emuMartin Schwidefsky
Fix three sparse warnings in math-emu / sysinfo: arch/s390/kernel/sysinfo.c:448:17: error: return expression in void function arch/s390/kernel/sysinfo.c:445:25: warning: shift too big (32) for type unsigned int arch/s390/kernel/sysinfo.c:445:25: warning: shift too big (32) for type unsigned int Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse warnings about missing prototypesMartin Schwidefsky
Add prototypes and includes for functions used in different modules. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse ANSI-C warningsMartin Schwidefsky
Fix prototype of some functions in arch/s390/oprofile to avoid non-ANSI warnings from sparse. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix sparse static warningsMartin Schwidefsky
Make functions and data static to avoid sparse warnings. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] sparse: fix access past end of array warningsMartin Schwidefsky
Remove unnecessary code to avoid false positives from sparse, e.g. arch/s390/kernel/compat_signal.c:221:61: warning: invalid access past the end of 'set32' (8 8) Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] Introduce get_clock_fast()Jan Glauber
Add get_clock_fast() which uses the slightly faster stckf if available. If stckf is not available fall back to stck, which has the same width. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] kvm: Handle diagnose 0x10 (release pages)Christian Borntraeger
Linux on System z uses a ballooner based on diagnose 0x10. (aka as collaborative memory management). This patch implements diagnose 0x10 on the guest address space. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] take mmap_sem when walking guest page tableCarsten Otte
gmap_fault needs to walk the guest page table. However, parts of that may change if some other thread does munmap. In that case gmap_unmap_notifier will also unmap the corresponding parts from the guest page table. We need to take mmap_sem in order to serialize these operations. do_exception now calls __gmap_fault with mmap_sem held which does not get exported to modules. The exported function, which is called from KVM, now takes mmap_sem. Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] fix list corruption in gmap reverse mappingCarsten Otte
This introduces locking via mm->page_table_lock to protect the rmap list for guest mappings from being corrupted by concurrent operations. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] fix possible deadlock in gmap_map_segmentCarsten Otte
Fix possible deadlock reported by lockdep: qemu-system-s39/2963 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: gmap_alloc_table+0x9c/0x120 but task is already holding lock: (&mm->mmap_sem){++++++}, at: gmap_map_segment+0xa6/0x27c Actually gmap_alloc_table is the only called in gmap_map_segment with mmap_sem held, thus it's safe to simply remove the inner lock. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] load user asce on sie_faultCarsten Otte
On sie_fault we need to switch back to user ASCE. Otherwise we get interresting effects when exiting to "userspace" while the guest space is still active. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] smp: external call vs. emergency signalMartin Schwidefsky
Use a sigp sense running to decide which signal processor order to use for an ipi. If the target cpu is running use external call, if the target cpu is not running use emergency signal. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] chsc_sch: add support for irq statisticsSebastian Ott
Add support for CHSC I/O interrupt statistics in /proc/interrupts. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] allow all addressing modesMartin Schwidefsky
The user space program can change its addressing mode between the 24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently the kernel always forces the standard amode on signal delivery and signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for a compat process and 31-bit kernels. Change the signal and ptrace code to allow the full range of addressing modes. Signal handlers are run in the standard addressing mode for the process. One caveat is that even an 31-bit compat process can switch to the 64-bit mode. The next signal will switch back into the 31-bit mode and there is no room in the 31-bit compat signal frame to store the information that the program came from the 64-bit mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] cleanup psw related bits and piecesMartin Schwidefsky
Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros. Change psw_kernel_bits / psw_user_bits to contain only the bits that are always set in the respective mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] add TIF_SYSCALL thread flagMartin Schwidefsky
Add an explicit TIF_SYSCALL bit that indicates if a task is inside a system call. The svc_code in the pt_regs structure is now only valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC can be replaced with TIF_SYSCALL. Overall do_signal is a bit more readable and it saves a few lines of code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] addressing mode limits and psw address wrappingMartin Schwidefsky
An instruction with an address right below the adress limit for the current addressing mode will wrap. The instruction restart logic in the protection fault handler and the signal code need to follow the wrapping rules to find the correct instruction address. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] signal race with restarting system callsMartin Schwidefsky
For a ERESTARTNOHAND/ERESTARTSYS/ERESTARTNOINTR restarting system call do_signal will prepare the restart of the system call with a rewind of the PSW before calling get_signal_to_deliver (where the debugger might take control). For A ERESTART_RESTARTBLOCK restarting system call do_signal will set -EINTR as return code. There are two issues with this approach: 1) strace never sees ERESTARTNOHAND, ERESTARTSYS, ERESTARTNOINTR or ERESTART_RESTARTBLOCK as the rewinding already took place or the return code has been changed to -EINTR 2) if get_signal_to_deliver does not return with a signal to deliver the restart via the repeat of the svc instruction is left in place. This opens a race if another signal is made pending before the system call instruction can be reexecuted. The original system call will be restarted even if the second signal would have ended the system call with -EINTR. These two issues can be solved by dropping the early rewind of the system call before get_signal_to_deliver has been called and by using the TIF_RESTART_SVC magic to do the restart if no signal has to be delivered. The only situation where the system call restart via the repeat of the svc instruction is appropriate is when a SA_RESTART signal is delivered to user space. Unfortunately this breaks inferior calls by the debugger again. The system call number and the length of the system call instruction is lost over the inferior call and user space will see ERESTARTNOHAND/ ERESTARTSYS/ERESTARTNOINTR/ERESTART_RESTARTBLOCK. To correct this a new ptrace interface is added to save/restore the system call number and system call instruction length. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] defconfig: switch on CONFIG_DEVTMPFSHendrik Brueckner
Switching on the DEVTMPFS kernel option helpes to maintain a /dev file system early in the boot process, especially, in limited environments. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] lowcore cleanupMartin Schwidefsky
Remove the save_area_64 field from the 0xe00 - 0xf00 area in the lowcore. Use a free slot in the save_area array instead. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] Add architecture code for unmapping crashkernel memoryMichael Holzheu
This patch implements the crash_map_pages() function for s390. KEXEC_CRASH_MEM_ALIGN is set to HPAGE_SIZE, in order to support kernel mappings that use large pages. We also use HPAGE_SIZE alignment for CONFIG_HUGETLB_PAGE=n in order to have the same 1 MiB alignment on all s390 systems. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] Export vmcoreinfo noteMichael Holzheu
This patch defines for s390 an ABI defined pointer to the vmcoreinfo note at a well known address. With this patch tools are able to find this information in dumps created by stand-alone or hypervisor dump tools. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] kdump backend codeMichael Holzheu
This patch provides the architecture specific part of the s390 kdump support. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] Add real memory access functionsMichael Holzheu
Add access function for real memory needed by s390 kdump backend. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] Force PSW restart on online CPUMichael Holzheu
PSW restart can be triggered on offline CPUs. If this happens, currently the PSW restart code fails, because functions like smp_processor_id() do not work on offline CPUs. This patch fixes this as follows: If PSW restart is triggered on an offline CPU, the PSW restart (sigp restart) is done a second time on another CPU that is online and the old CPU is stopped afterwards. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] fix _TIF_SINGLE_STEP definitionTejun Heo
_TIF_SINGLE_STEP is incorrectly defined as 1<<TIF_FREEZE. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] use ENTRY macro for sys_setns_wrapperJan Glauber
Use the ENTRY macro for the system call wrapper sys_setns_wrapper similarly to the other wrappers. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] memory leak with RCU_TABLE_FREEMartin Schwidefsky
The rcu page table free code uses a couple of bits in the page table pointer passed to tlb_remove_table to discern the different page table types. __tlb_remove_table extracts the type with an incorrect mask which leads to memory leaks. The correct mask is ((FRAG_MASK << 4) | FRAG_MASK). Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] user per registers vs. ptrace single steppingMartin Schwidefsky
git commit 5e9a2692 "[S390] ptrace cleanup" introduced a regression for the case when both a user PER set (e.g. a storage alteration trace) and PTRACE_SINGLESTEP are active. The new code will overrule the user PER set with a instruction-fetch PER set over the whole address space for ptrace single stepping. The inferior process will be stopped after each instruction with an instruction fetch event. Any other events that may have occurred concurrently are not reported (e.g. storage alteration event) because the control bits for them are not set. The solution is to merge the PER control bits of the user PER set with the PER_EVENT_IFETCH control bit for PTRACE_SINGLESTEP. Cc: stable@kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] topology: fix alloc_masks annotationSebastian Ott
Fix this warning: WARNING: vmlinux.o(.text+0x199b6): Section mismatch in reference from the function alloc_masks() to the function .init.text:__alloc_bootmem() Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] avoid warning in show_cpuinfoMartin Schwidefsky
The .start function and indirectly the .next function of the show_cpuinfo sequential operation uses NR_CPUS as limit instead of nr_cpu_ids. This can cause warnings like this: WARNING: at /usr/src/linux/include/linux/cpumask.h:107 Process lscpu (pid: 575, task: 000000007deb4338, ksp: 000000007794f588) Krnl PSW : 0704000180000000 0000000000106db4 (show_cpuinfo+0x108/0x234) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000003 0000000000791988 000000000071b478 0000000000000004 0000000000000001 0000000000000000 000000007d139500 0000000000000400 0000000000000000 000000000070e24c 000000007d48d600 0000000000000005 000000007d48d600 00000000004dfa10 0000000000106cf8 000000007794fcc0 Krnl Code: 0000000000106da8: 95001000 cli 0(%r1),0 0000000000106dac: a774ffac brc 7,106d04 0000000000106db0: a7f40001 brc 15,106db2 >0000000000106db4: 92011000 mvi 0(%r1),1 0000000000106db8: a7f4ffa6 brc 15,106d04 0000000000106dbc: c0e5000065b4 brasl %r14,113924 0000000000106dc2: c09000303a45 larl %r9,70e24c 0000000000106dc8: c020001eefd4 larl %r2,4e4d70 Replacing NR_CPUS with nr_cpu_ids fixes it. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30[S390] fix mismatch in summation of I/O IRQ statisticsPeter Oberparleiter
Current IRQ statistics support does not show detail counts for I/O interrupts which are processed internally only. The result is a summation count which is way off such as this one: CPU0 CPU1 CPU2 I/O: 1331 710 442 [...] QAI: 15 16 16 [I/O] QDIO Adapter Interrupt QDI: 1 0 0 [I/O] QDIO Interrupt DAS: 706 645 381 [I/O] DASD C15: 26 10 0 [I/O] 3215 C70: 0 0 0 [I/O] 3270 TAP: 0 0 0 [I/O] Tape VMR: 0 0 0 [I/O] Unit Record Devices LCS: 0 0 0 [I/O] LCS CLW: 0 0 0 [I/O] CLAW CTC: 0 0 0 [I/O] CTC APB: 0 0 0 [I/O] AP Bus Fix this by moving I/O interrupt accounting into the common I/O layer. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30KVM: s390: implement sigp external callChristian Ehrhardt
Implement sigp external call, which might be required for guests that issue an external call instead of an emergency signal for IPI. This fixes an issue with "KVM: unknown SIGP: 0x02" when booting such an SMP guest. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-10-30KVM: s390: fix register settingCarsten Otte
KVM common code does vcpu_load prior to calling our arch ioctls and vcpu_put after we're done here. Via the kvm_arch_vcpu_load/put callbacks we do load the fpu and access register state into the processor, which saves us moving the state on every SIE exit the kernel handles. However this breaks register setting from userspace, because of the following sequence: 1a. vcpu load stores userspace register content 1b. vcpu load loads guest register content 2. kvm_arch_vcpu_ioctl_set_fpu/sregs updates saved guest register content 3a. vcpu put stores the guest registers and overwrites the new content 3b. vcpu put loads the userspace register set again This patch loads the new guest register state into the cpu, so that the correct (new) set of guest registers will be stored in step 3a. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-10-30KVM: s390: fix return value of kvm_arch_init_vmCarsten Otte
This patch fixes the return value of kvm_arch_init_vm in case a memory allocation goes wrong. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-10-30KVM: s390: check cpu_id prior to using itCarsten Otte
We use the cpu id provided by userspace as array index here. Thus we clearly need to check it first. Ooops. CC: <stable@vger.kernel.org> Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 04:51:44 +0000