summaryrefslogtreecommitdiffstats
path: root/arch/sh/kernel/cpu
AgeCommit message (Collapse)Author
2009-08-13sh: convert processor device setup functions to arch_initcall()Magnus Damm
Convert the processor platform device setup functions from __initcall() and sometimes device_initcall() to arch_initcall(). This makes sure that the platform devices are registered a bit earlier so the devices are available when drivers register using initcall levels earlier than device_initcall(). A good example is platform devices needed by i2c-sh_mobile.c which registers a bit earlier using subsys_initcall(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-23sh: SH7786 SMP support.Paul Mundt
SH7786 is roughly identical to SH-X3 proto SMP, though there are only 2 CPUs. This just wraps in to the existing SH-X3 SMP code with some minor changes for SH7786, including wiring up the IPIs properly, enabling IRQ_PER_CPU, and so forth. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17Merge branches 'sh/pci-express-integration', 'sh/rsk-updates', ↵Paul Mundt
'sh/platform-updates' and 'sh/perf_counter'
2009-06-17sh: add platform data for r8a66597-hcd in setup-sh7723Yoshihiro Shimoda
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: add platform data for r8a66597-hcd in setup-sh7366Yoshihiro Shimoda
and remove redundant parameter for r8a66597-hcd. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-17sh: use kzalloc() for cpg clocksMagnus Damm
Convert the shared clock cpg code from bootmem to slab. Without this patch the current bootmem code triggers WARN_ON() because the slab is available. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14cpumask: Use accessors for cpu_*_mask: shRusty Russell
Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: Tie sparseirq in to Kconfig.Paul Mundt
Now that the dependent patches are merged, we are ready to enable sparseirq support. This simply adds the Kconfig option, and then converts from the _cpu to the _node allocation routines to follow the upstream sparseirq API changes. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724: Add JPU supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724: INTC setting updateKuninori Morimoto
This patch follows Rev 0.50 manual Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7722 clock framework rewriteMagnus Damm
This patch rewrites the sh7722 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. While at it, now when all SuperH Mobile processors are converted, fix CONFIG_SH_CLK_CPG_LEGACY to depend on CONFIG_ARCH_SHMOBILE. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7366 clock framework rewriteMagnus Damm
This patch rewrites the sh7366 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7343 clock framework rewriteMagnus Damm
This patch rewrites the sh7343 clock framework code. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7724 clock framework rewrite V3Magnus Damm
This patch contains V3 of the sh7724 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and fll are supported as input clocks to the pll. The div6 clocks are fed through a divide-by-3 block. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: sh7723 clock framework rewrite V2Magnus Damm
This patch contains V2 of the sh7723 clock framework rewrite. The new code makes use of the recently merged div4, div6 and mstp32 helper code. Both extal and dll are supported as input clocks to the pll. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: add enable()/disable()/set_rate() to div6 codeMagnus Damm
This patch updates the div6 clock helper code to add support for enable(), disable() and set_rate() callbacks. Needed by the camera clock enabling board code on Migo-R. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: rework mode pin codeMagnus Damm
This patch reworks the mode pin code to keep the pin definitions in one place. The mode pins values are now the value of the bit instead of bit number. With this patch in place the sh7785 header file contains mode pin comments. The sh7785 clock code and the sh7785lcr board code are updated to reflect the new shared mode pins. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: clock div6 helper codeMagnus Damm
This patch adds div6 clock helper code. The div6 clocks are simply 6-bit divide-by-n modules where n is 1 to 64. Needed for vclk on sh7722, sh7723, sh7343 and sh7366. sh7724 needs this even more for vclk, fclka, fclkb, irdaclk and spuclk. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-11sh: clock div4 frequency table offset fixMagnus Damm
This patch fixes the per clock offset calculation in sh_clk_div4_register(). Without this patch the offset to the frequency table for each clock is incorrect. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: sh7723: L2 cache initialization.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: sh7724: L2 cache initialization.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-02sh: add weak l2_cache_init function.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: Tidy up SH-4A boot_cpu_data.flags probing.Paul Mundt
This tidies up the boot_cpu_data.flags probing on SH-4A. All of them have a few things in common, which we can blindly set, rather than having each subtype have to set the same flags. We can also make assumptions about cache ways and the validity of PTEA, so this also kills off CPU_HAS_PTEA as a config option. There was also a bug in the FPU probing, which is now tidied up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: Tidy up the optional L2 probing, wire it up for SH7786.Paul Mundt
This tidies up the L2 probing, as it may or may not be implemented on a CPU, regardless of whether it is supported. This converts the cvr validity checks from BUG_ON()'s to simply clearing the CPU_HAS_L2_CACHE flag and moving on with life. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: hook up shared div4 clock code to sh7785Magnus Damm
Hook up the shared 4-bit divisor clock code to sh7785. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: shared div4 clock codeMagnus Damm
Add shared code for 4-bit divisor clocks. Processor specific code can use SH_CLK_DIV4() to initialize div4 clocks, and then use sh_clk_div4_register() for registration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: hook up shared mstp32 clock code to sh7785Magnus Damm
Hook up the shared 32-bit module stop bit code to sh7785. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: shared mstp32 clock codeMagnus Damm
Add shared 32-bit module stop bit clock support. Processor specific code can use SH_CLK_MSTP32() to initialize module stop bit clocks, and then use sh_clk_mstp32() for registration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: SH7724 has an L2 cache.Kuninori Morimoto
Add the CPU_HAS_L2_CACHE flag to SH7724. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-01sh: sh7785 pll configuration from mode pinMagnus Damm
This patch modifies the sh7785 clock code to use the MODE4 value to switch between 72x and 36x PLL multiplication. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26Merge branch 'sh/clkfwk'Paul Mundt
2009-05-26sh: remove clk_ops->build_rate_table()Magnus Damm
This patch removes the ->build_rate_table() callback, ->recalc() may instead be used for this purpose. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: use shared frequency tables on sh7785Magnus Damm
This patch converts the sh7785 clock code to make use of clk_rate_table_build() and clk_rate_table_round(). The ->build_rate_table() callback is removed, the table building is instead handled in ->recalc(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: add shared clock framework frequency table codeMagnus Damm
Add SuperH-specific clock framework helper functions: - clk_rate_table_build() - build cpufreq table from divisors/multipliers - clk_rate_table_round() - use cpufreq table to find matching frequency Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: add pll_clk to sh7785Magnus Damm
This patch converts the sh7785 pll implementation from the all-in-one code in frqmr_recalc() and frqmr_build_rate_table() to a separate struct clk. This allows us to remove the processor specific multiplier and use generic rate table functions. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-26sh: irq: Fix up imask build warnings.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk: Make clock-cpg usable for non-legacy platforms.Paul Mundt
This adds a new SH_CLK_CPG for parts that have CPG support. SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set for platforms that want clock-cpg to register the legacy clocks. With this new config item in place, it is now possible to start layering more generic CPG code in place while other platforms transition off of the legacy clocks. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: Wrap irq_to_desc_alloc_cpu() around CONFIG_SPARSE_IRQ temporarily.Paul Mundt
irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in -next, but as we can not presently enable SPARSE_IRQ without the early irq_desc alloc patch, protect it with an ifdef until the interface has settled and we are ready to enable it system-wide. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk: beyond ARRAY_SIZE of onchip_ops for sh7722.Roel Kluin
Do not go beyond ARRAY_SIZE of onchip_ops Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: clkfwk branch compile fix for clock-sh7722Magnus Damm
Fix clkfwk branch compile error in clock-sh7722.c. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Teach ipr and intc about dynamically allocating irq_descs.Paul Mundt
This hooks in irq_to_desc_alloc_cpu() to the necessary code paths in the intc and ipr controller registration paths. As these are the primary call paths for all SH CPUs, this alone will make all CPUs sparse IRQ ready. There is the added benefit now that each CPU contains specific IPR and INTC tables, so only the vectors with interrupt sources backing them will ever see an irq_desc instantiation. This effectively packs irq_desc down to match the CPU, rather than padding NR_IRQS out to cover the valid vector range. Boards with extra sources will still have to fiddle with the nr_irqs setting, but they can continue doing so through the machvec as before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Convert from irq_desc[] to irq_to_desc().Paul Mundt
This converts a few places that were using the old irq_desc[] array over to the shiny new irq_to_desc() helper. Preperatory work for sparse irq support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22sh: irq: Rework the SR.IMASK bitmap handling.Paul Mundt
This tidies up how the SR.IMASK bitmap is managed, using the bitmap API directly instead. At the same time, tidy up the irq_chip conversion a bit. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-14sh: intc tables for sh7770Magnus Damm
This patch adds INTC tables for sh7770, thanks goes to Paul for the first prototype version. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-14sh: clkfwk: Add MSTP bits to SH7785 clock framework.Paul Mundt
This plugs in all of the MSTP functions in to the clock framework, and hands them off to the platform devices that want them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Map tree hierarchy in debugfs.Paul Mundt
This adopts the OMAP clock framework debugfs bits and replaces the aging procfs bits. The procfs clocks entry was primarily a debugging aid, and used to be tied in to cpuinfo before the clock list grew too unweildly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: rate table construction and rounding for SH7785.Paul Mundt
This adds support for constructing a rate table by looking at potential divisors for a specified clock. Each FQRMR clock is given its own table. Presently each table is rebuilt when the parent propagates down a new rate, so some more logic needs to be added to do this more intelligently. Additionally, a fairly generic round_rate() implementation is then layered on top of it, which subsequently provides us with cpufreq support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Update SH7785 for refactored clock framework.Paul Mundt
This updates the SH7785 CPU code as well as the SH7785LCR board support code for making use of the newly refactored clock framework. Support for the legacy CPG clocks is dropped at this point, with the extal frequency fed in from the board code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Rework legacy CPG clock handling.Paul Mundt
This moves out the old legacy CPG clocks to their own file, and converts over the existing users. With these clocks going away and each CPU dealing with them on their own, CPUs can gradually move over to the new interface. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-13sh: clkfwk: Provide a generic clk_set_rate_ex() path for root clocks.Paul Mundt
In the case of root clocks (such as clkin oscillators, extal, etc.), the rate information is entirely platform dependent and needs to be lazily set and propagated from the platform code. This provides a method for establishing the rate update on these types of clocks that define no set_rate() op of their own. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-30 17:21:14 +0000