summaryrefslogtreecommitdiffstats
path: root/arch/sh/mm
AgeCommit message (Collapse)Author
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31sh: Add export.h to arch/sh specific files as required.Paul Gortmaker
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28sh: kexec: Add PHYSICAL_STARTSimon Horman
Add PHYSICAL_START kernel configuration parameter to set the address at which the kernel should be loaded. It has been observed on an sh7757lcr that simply modifying MEMORY_START does not achieve this goal for 32bit sh. This is due to MEMORY_OFFSET in arch/sh/kernel/vmlinux.lds.S bot being based on MEMORY_START on such systems. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-07-22Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (123 commits) perf: Remove the nmi parameter from the oprofile_perf backend x86, perf: Make copy_from_user_nmi() a library function perf: Remove perf_event_attr::type check x86, perf: P4 PMU - Fix typos in comments and style cleanup perf tools: Make test use the preset debugfs path perf tools: Add automated tests for events parsing perf tools: De-opt the parse_events function perf script: Fix display of IP address for non-callchain path perf tools: Fix endian conversion reading event attr from file header perf tools: Add missing 'node' alias to the hw_cache[] array perf probe: Support adding probes on offline kernel modules perf probe: Add probed module in front of function perf probe: Introduce debuginfo to encapsulate dwarf information perf-probe: Move dwarf library routines to dwarf-aux.{c, h} perf probe: Remove redundant dwarf functions perf probe: Move strtailcmp to string.c perf probe: Rename DIE_FIND_CB_FOUND to DIE_FIND_CB_END tracing/kprobe: Update symbol reference when loading module tracing/kprobes: Support module init function probing kprobes: Return -ENOENT if probe point doesn't exist ...
2011-07-01perf: Remove the nmi parameter from the swevent and overflow interfacePeter Zijlstra
The nmi parameter indicated if we could do wakeups from the current context, if not, we would set some state and self-IPI and let the resulting interrupt do the wakeup. For the various event classes: - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from the PMI-tail (ARM etc.) - tracepoint: nmi=0; since tracepoint could be from NMI context. - software: nmi=[0,1]; some, like the schedule thing cannot perform wakeups, and hence need 0. As one can see, there is very little nmi=1 usage, and the down-side of not using it is that on some platforms some software events can have a jiffy delay in wakeup (when arch_irq_work_raise isn't implemented). The up-side however is that we can remove the nmi parameter and save a bunch of conditionals in fast paths. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Will Deacon <will.deacon@arm.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: Eric B Munson <emunson@mgebm.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-30sh: use printk_ratelimited instead of printk_ratelimitPaul Mundt
Follows the powerpc change, for much the same rationale. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-06sh: fix wrong icache/dcache address-array start addr in cache-debugfs.Srinivas KANDAGATLA
This patch fixes a icache/dcache address-array start address while dumping its entires in debugfs. Perviously the code was attempting to remember the address in static variable, which is no more required for debugfs, as the function can be executed in one pass. Without this patch the start address ends up in wrong place and the /sys/kernel/debug/sh/icache or dcache debugfs contents may not be correct. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-31sh64: Move from P1SEG to CAC_ADDR for consistent sync.Paul Mundt
sh64 doesn't define a P1SEGADDR, resulting in a build failure. The proper mapping can be attained for both sh32 and 64 via the CAC_ADDR macro, so switch to that instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-05-25mm: now that all old mmu_gather code is gone, remove the storagePeter Zijlstra
Fold all the mmu_gather rework patches into one for submission Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23sh: pmb: Use struct syscore_ops instead of sysdevsPaul Mundt
This converts the PMB code over to use the new syscore_ops and kills off the old sysdev utilization, as per Rafael's example. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15sh: Enable CONFIG_GCOV_PROFILE_ALL for shChris Smith
This patch enables gcov kernel profiling over the whole kernel for sh. Profiling of specific files individually already worked. A handful of files have to be explicitly excluded from the profiling to avoid breaking things, notably pmb.c. Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-02-15sh: Flush executable pages in copy_user_highpageStuart Menefy
This resolves a problem seen when using the Android dynamic linker. Sometimes the dynamic linker would seg-fault at start up and this was eventually traced to the handling of a COW fault for a page which was being modified by the linker. If there was no cache aliasing between the kernel and the user page, the page was not flushed, leaving the newly copied data in the D-cache. However when executing instructions from that page, the I-cache is filled directly from external memory, rather than the D-cache, and causing garbage to be executed. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13thp: pte alloc trans splittingAndrea Arcangeli
pte alloc routines must wait for split_huge_page if the pmd is not present and not null (i.e. pmd_trans_splitting). The additional branches are optimized away at compile time by pmd_trans_splitting if the config option is off. However we must pass the vma down in order to know the anon_vma lock to wait for. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13Merge branch 'sh-latest' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (31 commits) sh: Add support for AP-SH4AD-0A board. sh: Add support for AP-SH4A-3A board. sh: Add a new mach type for alpha project boards. serial: sh-sci: build fixes. sh: sh7372 SH4AL-DSP probe support sh: sh7366 Enable SDIO IRQs sh: sh7343 Enable SDIO IRQs sh: mach-ecovec24: enable runtime PM for SDHI sh: sh7723 / ap325rxa enable SDIO IRQs sh: sh7722 Enable SDIO IRQs sh: sh7724 Enable SDIO IRQs sh: Fix up legacy PTEA space attribute mapping. sh: Stub out legacy PCC pgprot encoding for X2 TLBs. sh: constify prefetch pointers. sh: Add a machvec callback for early memblock reservations. sh: update sh7757lcr_defconfig sh: add PVR probing for SH7757 3rd cut sh: Use device_initcall() instead of __initcall() sh: intc - convert board specific landisk code sh: Move init_landisk_IRQ to header file ...
2011-01-11sh: Add a machvec callback for early memblock reservations.Paul Mundt
This adds in a callback to the machvec to allow platforms to do early reservations through memblock. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-01sh: Assume new page cache pages have dirty dcache lines.Paul Mundt
This follows the ARM change c01778001a4f5ad9c62d882776235f3f31922fdd ("ARM: 6379/1: Assume new page cache pages have dirty D-cache") for the same rationale: There are places in Linux where writes to newly allocated page cache pages happen without a subsequent call to flush_dcache_page() (several PIO drivers including USB HCD). This patch changes the meaning of PG_arch_1 to be PG_dcache_clean and always flush the D-cache for a newly mapped page in update_mmu_cache(). This addresses issues seen with executing binaries from MMC, in addition to some of the other HCDs that don't explicitly do cache management for their pipe-in buffers. Requested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04sh: nommu: use 32-bit phys mode.Paul Mundt
The nommu code has regressed somewhat in that 29BIT gets set for the SH-2/2A configs regardless of the fact that they are really 32BIT sans MMU or PMB. This does a bit of tidying to get nommu properly selecting 32BIT as it was before. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-27sh: lockless get_user_pages_fast()Paul Mundt
Implement get_user_pages_fast without locking in the fastpath on sh. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits) sh: i2c-sh7760: Replase from ctrl_* to __raw_* sh: clkfwk: Shuffle around to match the intc split up. sh: clkfwk: modify for_each_frequency end condition sh: fix clk_get() error handling sh: clkfwk: Fix fault in frequency iterator. sh: clkfwk: Add a helper for rate rounding by divisor ranges. sh: clkfwk: Abstract rate rounding helper. sh: clkfwk: support clock remapping. sh: pci: Convert to upper/lower_32_bits() helpers. sh: mach-sdk7786: Add support for the FPGA SRAM. sh: Provide a generic SRAM pool for tiny memories. sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786. sh: pci: Support slot 4 routing on SDK7786. sh: Fix up PMB locking. sh: mach-sdk7786: Add support for fpga gpios. sh: use pr_fmt for clock framework, too. sh: remove name and id from struct clk sh: free-without-alloc fix for sh_mobile_lcdcfb sh: perf: Set up perf_max_events. sh: perf: Support SH-X3 hardware counters. ... Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
2010-10-15sh: Provide a generic SRAM pool for tiny memories.Paul Mundt
This sets up a generic SRAM pool for CPUs and platform code to insert their otherwise unused memories into. A simple alloc/free interface is provided (lifed from avr32) for generic code. This only applies to tiny SRAMs that are otherwise unmanaged, and does not take in to account the more complex SRAMs sitting behind transfer engines, or that employ an I/D split. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14sh: Fix up PMB locking.Paul Mundt
This first converts the PMB locking over to raw spinlocks, and secondly fixes up a nested locking issue that was triggering lockdep early on: swapper/0 is trying to acquire lock: (&pmbe->lock){......}, at: [<806be9bc>] pmb_init+0xf4/0x4dc but task is already holding lock: (&pmbe->lock){......}, at: [<806be98e>] pmb_init+0xc6/0x4dc other info that might help us debug this: 1 lock held by swapper/0: #0: (&pmbe->lock){......}, at: [<806be98e>] pmb_init+0xc6/0x4dc Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-12memblock, bootmem: Round pfn properly for memory and reserved regionsYinghai Lu
We need to round memory regions correctly -- specifically, we need to round reserved region in the more expansive direction (lower limit down, upper limit up) whereas usable memory regions need to be rounded in the more restrictive direction (lower limit up, upper limit down). This introduces two set of inlines: memblock_region_memory_base_pfn() memblock_region_memory_end_pfn() memblock_region_reserved_base_pfn() memblock_region_reserved_end_pfn() Although they are antisymmetric (and therefore are technically duplicates) the use of the different inlines explicitly documents the programmer's intention. The lack of proper rounding caused a bug on ARM, which was then found to also affect other architectures. Reported-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4CB4CDFD.4020105@kernel.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-24sh: provide generic arch_debugfs_dir.Paul Mundt
While sh previously had its own debugfs root, there now exists a common arch_debugfs_dir prototype, so we switch everything over to that. Presumably once more architectures start making use of this we'll be able to just kill off the stub kdebugfs wrapper. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-23sh: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-16sh: stub __flush_tlb_global() definition for nommu.Paul Mundt
This fixes up the nommu build with a stub definition for __flush_tlb_global(), now used by the reboot code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04sh: Use __GFP_ZERO for dma_generic_alloc_coherent().Andrew Murray
This follows the x86 change off of memset() and on to an unconditional __GFP_ZERO for wrapping in to optimized page clearing by way of clear_highpage(). Signed-off-by: Andrew Murray <amurray@mpc-data.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-04Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2010-08-04memblock/sh: Use new accessorsBenjamin Herrenschmidt
CC: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-14lmb: rename to memblockYinghai Lu
via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-02sh: Provide a global TLB flush for U/I-TLB clear.Paul Mundt
This provides a sledgehammer approach for clearing the TLBs, only to be used in cases where we know we will never want to use the mappings again and have no interest in preserving state. This also destroys wired entries. The primary use for this is when we are either entering or exiting the kernel completely, in the latter case as a precursor for CPU reset by MMU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21sh: Fix up PUD trampling in ranged page table init for X2TLB.Paul Mundt
page_table_range_init() presently allocates a PUD page for the 3-level page table case on X2 TLB configurations on each successive call. This results in the previous PUD page being trampled when PMDs with an overlapping PUD are initialized. This case was triggered by putting persistent kmaps immediately below the fixmap range for highmem. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-21arch/sh/mm: Eliminate a double lockJulia Lawall
The function begins and ends with a read_lock. The latter is changed to a read_unlock. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @locked@ expression E1; position p; @@ read_lock(E1@p,...); @r exists@ expression x <= locked.E1; expression locked.E1; expression E2; identifier lock; position locked.p,p1,p2; @@ *lock@p1 (E1@p,...); ... when != E1 when != \(x = E2\|&x\) *lock@p2 (E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-18sh: Fix up the NUMA build for recent LMB changes.Paul Mundt
Now that the node 0 initialization code has been overhauled, kill off the now obsolete setup_memory() bits. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-18sh: fix up CONFIG_KEXEC=n build.Paul Mundt
The reserve_crashkernel() definition is in asm/kexec.h which is only dragged in via linux/kexec.h if CONFIG_KEXEC is set. Just switch over to asm/kexec.h unconditionally to fix up the build. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: Reject small mappings for PMB bolting.Paul Mundt
The minimum section size for the PMB is 16M, so just always error out early if the specified size is too small. This permits us to unconditionally call in to pmb_bolt_mapping() with variable sizes without wasting a TLB and cache flush for the range. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-11sh: bootmem refactoring.Paul Mundt
This reworks much of the bootmem setup and initialization code allowing us to get rid of duplicate work between the NUMA and non-NUMA cases. The end result is that we end up with a much more flexible interface for supporting more complex topologies (fake NUMA, highmem, etc, etc.) which is entirely LMB backed. This is an incremental step for more NUMA work as well as gradually enabling migration off of bootmem entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-10sh: enable LMB region setup via machvec.Paul Mundt
This plugs in a memory init callback in the machvec to permit boards to wire up various bits of memory directly in to LMB. A generic machvec implementation is provided that simply wraps around the normal Kconfig-derived memory start/size. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26sh: Kill off dangling goto labels from oom-killer rework.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26Merge branch 'sh/stable-updates'Paul Mundt
Conflicts: arch/sh/kernel/dwarf.c drivers/dma/shdma.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26Merge branch 'master' of ↵Paul Mundt
master.kernel.org:/pub/scm/linux/kernel/git/mfleming/sh-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mfleming/sh-2.6: sh: Use correct mask when comparing PMB DATA array values sh: Do not try merging two 128MB PMB mappings sh: Fix zImage load address when CONFIG_32BIT=y sh: Fix address to decompress at when CONFIG_32BIT=y sh: Assembly friendly __pa and __va definitions
2010-04-26sh: invoke oom-killer from page faultNick Piggin
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: linux-sh@vger.kernel.org Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-25sh: Do not try merging two 128MB PMB mappingsMatt Fleming
There is a logic error in pmb_merge() that means we will incorrectly try to merge two 128MB PMB mappings into one mapping. However, 256MB isn't a valid PMB map size and pmb_merge() will actually drop the second 128MB mapping. This patch allows my SDK7786 board to boot when configured with CONFIG_MEMORY_SIZE=0x10000000. Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-04-20sh: Zero out aliases counter when using SH-X3 hardware assistance.Paul Mundt
This zeroes out the number of cache aliases in the cache info descriptors when hardware alias avoidance is enabled. This cuts down on the amount of flushing taken care of by common code, and also permits coherency control to be disabled for the single CPU and 4k page size case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-19sh: Enable SH-X3 hardware synonym avoidance handling.Paul Mundt
This enables support for the hardware synonym avoidance handling on SH-X3 CPUs for the case where dcache aliases are possible. icache handling is retained, but we flip on broadcasting of the block invalidations due to the lack of coherency otherwise on SMP. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-05Merge branch 'sh/stable-updates'Paul Mundt
2010-04-05Merge branch 'master' into export-slabhTejun Heo
2010-04-02sh: Fix up the SH-3 build for recent TLB changes.Paul Mundt
While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4 and later TLBs, these features are absent on SH-3. This splits out local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the old SH-3 one, subsequently fixing up the build. This will probably want some further reordering and tidying in the future, but that's out of scope at present. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>