summaryrefslogtreecommitdiffstats
path: root/arch/sh
AgeCommit message (Collapse)Author
2008-06-09sh: Add -mno-fdpic to default flags.Paul Mundt
Presently the --fdpic specifier and the --isa matching clash when building with FDPIC toolchains. As we have no interest in building the kernel with --fdpic in the first place, always try to add in -mno-fdpic to the default flags. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09sh: add resource of USB host for SH7723Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09sh: Fix compile error SH7763 setup codeNobuhiro Iwamatsu
SH7763's setup code use old DECLARE_INTC_DESC. There was a compile error because of this. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-09sh: Add SH7723 SCIF supportYusuke.Goda
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-03sh: Add defconfig for RSK7203.Paul Mundt
RSK7203 is supportable through the generic machvec, so we add a defconfig for those bits. This gets updated with more complete board support later. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-03sh: Update SE7206 defconfig.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-02sh: Disable 4KSTACKS on nommu.Paul Mundt
4k stacks on nommu ends up blowing up with all sorts of interesting slab corruption. Disable this by default unless BROKEN is also enabled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-02sh: module.c use kernel unaligned helpersHarvey Harrison
Replace the COPY_UNALIGNED_WORD helper. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-06-02sh/kernel/cpu/irq/intc-sh5.c build fixAdrian Bunk
This patch fixes the following build error caused by commit a1dc4b59fa4af97ae68ee214d4d72bbd7c7ec1dc (sh: intc_sh5 depends on cayman board for IRQ priority table.): <-- snip --> ... CC arch/sh/kernel/cpu/irq/intc-sh5.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c: In function 'plat_irq_setup': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c:257: error: expected declaration or statement at end of input make[4]: *** [arch/sh/kernel/cpu/irq/intc-sh5.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-26sh: Drop broken URAM support on SH7723.Paul Mundt
This was copied over from the previous MobileR bits, which doesn't apply to R2. The URAM block on R2 is recycled for the L2 instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23sh: update Migo-R defconfigMagnus Damm
Update the Migo-R defconfig to include support for KEYSC, I2C, RTC and NAND and NOR MTD devices. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23sh: use sm501 8250 mfd support on r2d boardsMagnus Damm
Make use of recently added sm501 8250 uart support, commit 61711f8fd8180e458cfb6846bcf4fc636a95f3db makes the mfd code handle 8250 uarts so there is no longer need to do it from the r2d board code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23sh: add probe support for new sh7723 cutMagnus Damm
This patch adds support for sh7723 silicon with a prr value of 0x51. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23sh: fix VPU interrupt vector for sh7723Magnus Damm
This patch fixes a VPU vector typo for sh7723. The correct value is 0x980, the same as for sh7722. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-23sh: fix USBF resource for sh7722Magnus Damm
The USBF function on sh7722 is currently not working with the m66592_udc driver. The driver is using platform_get_resource_byname() so my commit a0d29798e568116aa6c32aef7bab2d9e620c88ad broke sh7722 support. The long term fix is to replace platform_get_resource_byname() in the driver with platform_get_resource(), but this helps until that happens. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-21MODULE_LICENSE expects "GPL v2", not "GPLv2"Al Viro
... and we have few enough places using the latter to make it simpler to do search and replace... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] return to old errno choice in mkdir() et.al. [Patch] fs/binfmt_elf.c: fix wrong return values [PATCH] get rid of leak in compat_execve() [Patch] fs/binfmt_elf.c: fix a wrong free [PATCH] avoid multiplication overflows and signedness issues for max_fds [PATCH] dup_fd() part 4 - race fix [PATCH] dup_fd() - part 3 [PATCH] dup_fd() part 2 [PATCH] dup_fd() fixes, part 1 [PATCH] take init_files to fs/file.c
2008-05-19sh: Fix up restorer in debug_trap exception return path.Paul Mundt
There are a few different types of debug trap exceptions, though now that they are all going through a special jump table, the restorer needs to be unified as well. Presently this is falling through the ret_from_fork path, which more or less does the right thing on SH-3/4 whilst being completely unsuitable on MMU-less targets. Ultimately what we want here is a branch through the platform's restore_all directly, without worrying about the retval being clobbered. We can accomplish that through a branch to __restore_all directly, so switch it so we come back from the jump table and branch to the restorer. This fixes up a recursion in the nommu WARN_ON() path, as well as some other userspace nastiness where said recursion caused serious stack corruption. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-19sh: Make is_valid_bugaddr() more intelligent on nommu.Paul Mundt
Currently is_valid_bugaddr() is true for anything >= PAGE_OFFSET, which happens to be 0 on nommu configurations. Make this a bit smarter by just reading in the opcode and comparing it against the trap type that we already know. Follows the logic from avr32. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16[PATCH] take init_files to fs/file.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-16sh: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: fix sh7785 master clock valueYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: Fix up thread info pointer in syscall_badsys resume path.Hideo Saito
Entry to resume_userspace expects r8 to contain current_thread_info, which happens in all paths except for syscall_badsys, where r8 was being inadvertently trampled. Reload it before the branch. Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: Fix up optimized SH-4 memcpy on big endian.Hideo Saito
Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: disable initrd defaults in .empty_zero_page.Paul Mundt
When using initramfs on systems that don't explicitly clear LOADER_TYPE, unpack_to_rootfs() tramples tramples the range with the defaults taken out of .empty_zero_page. This causes kernels with valid initramfs images to bail out with crc or gzip magic mismatch errors after the second unpack takes place on certain platform configurations. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: display boot params by default on entry.Paul Mundt
Some kernel and boot loader configurations tweak the .empty_zero_page settings, while others do not. Print the values out on entry as a debugging aid. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-14lib: create common ascii hex arrayHarvey Harrison
Add a common hex array in hexdump.c so everyone can use it. Add a common hi/lo helper to avoid the shifting masking that is done to get the upper and lower nibbles of a byte value. Pull the pack_hex_byte helper from kgdb as it is opencoded many places in the tree that will be consolidated. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-09SH: catch negative denormal_subf1() retval in denormal_add()Roel Kluin
'ix' is unsigned but denormal_subf1() may return a negative int. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-09sh: update smc91x platform data for se7206.Paul Mundt
Follows the se7722 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: intc register modify fixMagnus Damm
Make sure register modifications stay atomic. Fixes processors with shared priority register masking. Dual bitmap masking is unaffected. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: no high level trigger on some sh3 cpusMagnus Damm
The processor models sh7706, sh7707 and sh7709 don't support high level trigger sense configuration. And the intc code looks like crap these days so what's the difference. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: clean up sh7710 and sh7720 intc tablesMagnus Damm
Clean up the intc tables by removing unneeded #ifdefs. The vector list is what selects which interrupt sources that should be added, having unsupported bitfields listed is ok as long as the vector is excluded from the list. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add interrupt ack code to sh3Magnus Damm
This patch adds interrupt acknowledge code for external interrupt sources on sh3 processors. Only really required for edge triggered interrupts, but we ack regardless of sense configuration. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: unify external irq pin code for sh3Magnus Damm
This patch unifies the sh3 external irq pin code. It buys us some savings with reduced code redundancy, but the main feature with this change is irq sense selection support for all sh3 processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: reset hardware from early printkMagnus Damm
Reset the transmitter and receiver when setting up early printk. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: drain and wait for early printkMagnus Damm
Drain by waiting for all characters to be sent, and make sure to wait a little bit after setting up the baud rate. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: use sci_out() for early printkMagnus Damm
Use sci_out() instead of ctrl_outw() for early printk setup code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add memory resources to /proc/iomemMagnus Damm
Add physical memory resources such as System RAM, Kernel code/data/bss and reserved crash dump area to /proc/iomem. Same strategy as on x86. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: add kernel bss resourceMagnus Damm
Do like everyone else and have a struct resource for kernel bss. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: fix sh7705 interrupt vector typoMagnus Damm
Fix sh7705 interrupt sources for vectors 0xc80 and 0xca0. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: update smc91x platform data for se7722Magnus Damm
Select smc91x bus width using platform data for se7722 now when the smc91x header file is in place. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: update smc91x platform data for MigoRMagnus Damm
Select smc91x bus width and irg flags using platform data for MigoR now when the smc91x header file is in place. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: remove -traditional.Mathieu Desnoyers
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Sam Ravnborg <sam@ravnborg.org> CC: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: r7780rp: Kill off unneded ifdefs for irq setup.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: rts7751r2d: Kill off unneeded ifdefs.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: intc_sh5 depends on cayman board for IRQ priority table.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: export onchip_remap/unmap() too.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: Some symbol exports to make the allmodconfig happier.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh: remove the broken SH_MPC1211 supportAdrian Bunk
SH_MPC1211 has been marked as BROKEN for some time. Unless someone is working on reviving it now, I'd therefore suggest this patch to remove it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08sh64: Setup I/D-TLB defaults in SH-5 probe path.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-30 05:04:56 +0000