summaryrefslogtreecommitdiffstats
path: root/arch/tile
AgeCommit message (Collapse)Author
2010-09-24Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: remove dead code from intvec_32.S
2010-09-24arch/tile: remove dead code from intvec_32.SChris Metcalf
This "bpt_code" instruction was killed off in our development line a while ago (the actual definition of bpt_code that is used is in kernel/traps.c) but I didn't push it for 2.6.36 because it seemed harmless and I didn't want to try to push more than absolutely necessary. However, we recently fixed a bug in our gcc that had been causing "-gdwarf2" not to be passed to the assembler, and passing this flag causes an erroneous assembler failure in the presence of code in a data section, sometimes. While we'd like to track down the bug in the assembler, we'd also like to make sure 2.6.36 builds with the current toolchain, so I'm removing this dead code as well. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-16Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: fix formatting bug in register dumps arch/tile: fix memcpy_fromio()/memcpy_toio() signatures arch/tile: Save and restore extra user state for tilegx arch/tile: Change struct sigcontext to be more useful arch/tile: finish const-ifying sys_execve()
2010-09-15arch/tile: fix formatting bug in register dumpsChris Metcalf
This cut-and-paste bug was caused by rewriting the register dump code to use only a single printk per line of output. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: fix memcpy_fromio()/memcpy_toio() signaturesChris Metcalf
This tripped up a driver (not yet committed to git). Fix it now. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: Save and restore extra user state for tilegxChris Metcalf
During context switch, save and restore a couple of additional bits of tilegx user state that can be persistently modified by userspace. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: Change struct sigcontext to be more usefulChris Metcalf
Rather than just using pt_regs, it now contains the actual saved state explicitly, similar to pt_regs. By doing it this way, we provide a cleaner API for userspace (or equivalently, we avoid the need for libc to provide its own definition of sigcontext). While we're at it, move PT_FLAGS_xxx to where they are not visible from userspace. And always pass siginfo and mcontext to signal handlers, even if they claim they don't need it, since sometimes they actually try to use it anyway in practice. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-15arch/tile: finish const-ifying sys_execve()Chris Metcalf
The sys_execve() implementation was properly const-ified but not the declaration, the syscall wrappers, or the compat version. This change completes the constification process. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-09-14compat: Make compat_alloc_user_space() incorporate the access_ok()H. Peter Anvin
compat_alloc_user_space() expects the caller to independently call access_ok() to verify the returned area. A missing call could introduce problems on some architectures. This patch incorporates the access_ok() check into compat_alloc_user_space() and also adds a sanity check on the length. The existing compat_alloc_user_space() implementations are renamed arch_compat_alloc_user_space() and are used as part of the implementation of the new global function. This patch assumes NULL will cause __get_user()/__put_user() to either fail or access userspace on all architectures. This should be followed by checking the return value of compat_access_user_space() for NULL in the callers, at which time the access_ok() in the callers can also be removed. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@kernel.org>
2010-08-17Make do_execve() take a const filename pointerDavid Howells
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: don't validate CROSS_COMPILE needlessly arch/tile: export only COMMAND_LINE_SIZE to userspace. arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN arch/tile: Rename the hweight() implementations to __arch_hweight() arch/tile: extend syscall ABI to set r1 on return as well. arch/tile: Various cleanups. arch/tile: support backtracing on TILE-Gx arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx. arch/tile: Use separate, better minsec values for clocksource and sched_clock. arch/tile: correct a bug in freeing bootmem by VA for the optional second initrd. arch: tile: mm: pgtable.c: Removed duplicated #include arch: tile: kernel/proc.c Removed duplicated #include Add fanotify syscalls to <asm-generic/unistd.h>. arch/tile: support new kunmap_atomic() naming convention. tile: remove unused ISA_DMA_THRESHOLD define Conflicts in arch/tile/configs/tile_defconfig (pick the mainline version with the reduced defconfig).
2010-08-15arch/tile: don't validate CROSS_COMPILE needlesslyChris Metcalf
With this change, the arch/tile Makefile will only check for a valid combination of CROSS_COMPILE vs "uname -m" for a few common targets that are typically the ones we get wrong (vmlinux, all, and modules). The change handles the case of an empty "make" goal like "make all". Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-15arch/tile: export only COMMAND_LINE_SIZE to userspace.Chris Metcalf
This fixes a failure in "make headers_check" for tile. I hadn't realized this file was exported to userspace by default. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-15arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGNChris Metcalf
See commit a6eb9fe105d5de0053b261148cee56c94b4720ca. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2010-08-14defconfig reductionSam Ravnborg
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-13arch/tile: Rename the hweight() implementations to __arch_hweight()Chris Metcalf
See commit 1527bc8b928dd1399c3d3467dd47d9ede210978a. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13Merge branch 'master' into for-linusChris Metcalf
2010-08-13arch/tile: extend syscall ABI to set r1 on return as well.Chris Metcalf
Until now, the tile architecture ABI for syscall return has just been that r0 holds the return value, and an error is only signalled like it is for kernel code, with a negative small number. However, this means that in multiple places in userspace we end up writing the same three-cycle idiom that tests for a small negative number for error. It seems cleaner to instead move that code into the kernel, and set r1 to hold zero on success or errno on failure; previously, r1 was just zeroed on return from the kernel (to avoid leaking kernel state). This way a single conditional branch after the syscall is sufficient to test for the failure case. The number of cycles taken is the same, but the error-checking code is in just one place, so total code size is smaller, and random userspace syscall code is easier to understand. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13arch/tile: Various cleanups.Chris Metcalf
This change rolls up random cleanups not representing any actual bugs. - Remove a stale CONFIG_ value from the default tile_defconfig - Remove unused tns_atomic_xxx() family of methods from <asm/atomic.h> - Optimize get_order() using Tile's "clz" instruction - Fix a bad hypervisor upcall name (not currently used in Linux anyway) - Use __copy_in_user_inatomic() name for consistency, and export it - Export some additional hypervisor driver I/O upcalls and some homecache calls - Remove the obfuscating MEMCPY_TEST_WH64 support code - Other stray comment cleanups, #if 0 removal, etc. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13arch/tile: support backtracing on TILE-GxChris Metcalf
This functionality was stubbed out until recently. Now we support our normal backtracing API on TILE-Gx as well as on TILE64/TILEPro. This change includes a tweak to the instruction encoding caused by adding addxli for compat mode. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx.Chris Metcalf
First, the siginfo preamble wasn't quite right; we need to indicate that we are padding up to 4 ints of preamble for 64-bit code, and then for compat mode we need to pad differently, using only 3 ints. Second, the C ABI requires a save area of two registers, not two pointers, since in compat mode we have 64-bit registers all of which we need to save, even though we only have 32-bit VAs. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13arch/tile: Use separate, better minsec values for clocksource and sched_clock.Chris Metcalf
We were using the same 5-sec minsec for the clocksource and sched_clock that we were using for the clock_event_device. For the clock_event_device that's exactly right since it has a short maximum countdown time. But for sched_clock we want to avoid wraparound when converting from ticks to nsec over a much longer window, so we force a shift of 10. And for clocksource it seems dodgy to use a 5-sec minsec as well, so we copy some other platforms and force a shift of 22. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13arch/tile: correct a bug in freeing bootmem by VA for the optional second ↵Chris Metcalf
initrd. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13arch: tile: mm: pgtable.c: Removed duplicated #includeAndrea Gelmini
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-13arch: tile: kernel/proc.c Removed duplicated #includeAndrea Gelmini
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-11dma-mapping: remove dma_is_consistent APIFUJITA Tomonori
Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dma-mapping: unify dma_get_cache_alignment implementationsFUJITA Tomonori
dma_get_cache_alignment returns the minimum DMA alignment. Architectures defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we can unify dma_get_cache_alignment implementations. Note that some architectures implement dma_get_cache_alignment wrongly. dma_get_cache_alignment() should return the minimum DMA alignment. So fully-coherent architectures should return 1. This patch also fixes this issue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11arch/tile: support new kunmap_atomic() naming convention.Chris Metcalf
See commit 597781f3e51f48ef8e67be772196d9e9673752c4. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-08-11tile: remove unused ISA_DMA_THRESHOLD defineFUJITA Tomonori
No need to define ISA_DMA_THRESHOLD Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [cmetcalf@tilera.com: converted to a single-line #include file] Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-07-16arch/tile: check kmalloc() resultKulikov Vasiliy
If kmalloc() fails exit with -ENOMEM. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2010-07-06arch/tile: catch up on various minor cleanups.Chris Metcalf
None of these changes fix any actual bugs, but are just various cleanups that fell out along the way. In particular, some unused #defines and includes are removed, PREFETCH_STRIDE is added (the default is right for our shipping chips, but wrong for our next generation), our tile-specific prefetching code is removed so the (identical) generic prefetching code can be used instead, a comment is fixed to be proper GPL and not just a "paste GPL here" token, a "//" comment is converted to "/* */", etc. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06arch/tile: avoid erroneous error return for PTRACE_POKEUSR.Chris Metcalf
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06tile: set ARCH_KMALLOC_MINALIGNFUJITA Tomonori
Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2010-07-06tile: remove homegrown L1_CACHE_ALIGN macroFUJITA Tomonori
Let's use the standard L1_CACHE_ALIGN macro instead. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2010-07-06arch/tile: Miscellaneous cleanup changes.Chris Metcalf
This commit is primarily changes caused by reviewing "sparse" and "checkpatch" output on our sources, so is somewhat noisy, since things like "printk() -> pr_err()" (or whatever) throughout the codebase tend to get tedious to read. Rather than trying to tease apart precisely which things changed due to which type of code review, this commit includes various cleanups in the code: - sparse: Add declarations in headers for globals. - sparse: Fix __user annotations. - sparse: Using gfp_t consistently instead of int. - sparse: removing functions not actually used. - checkpatch: Clean up printk() warnings by using pr_info(), etc.; also avoid partial-line printks except in bootup code. - checkpatch: Use exposed structs rather than typedefs. - checkpatch: Change some C99 comments to C89 comments. In addition, a couple of minor other changes are rolled in to this commit: - Add support for a "raise" instruction to cause SIGFPE, etc., to be raised. - Remove some compat code that is unnecessary when we fully eliminate some of the deprecated syscalls from the generic syscall ABI. - Update the tile_defconfig to reflect current config contents. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06arch/tile: Split the icache flush code off to a generic <arch> header.Chris Metcalf
This code is used in other places in our system than in Linux, so to share it we now implement it as an inline function in our low-level <arch> headers, and instantiate it in one file in Linux's arch/tile/lib. The file is now cacheflush.c and is C code rather than the strangely-named and assembler-implemented __invalidate_icache.S. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06arch/tile: Fix bug in support for atomic64_xx() ops.Chris Metcalf
This wasn't properly tested until the perf-event subsystem started to get brought up under the tile architecture. The bug caused bogus atomic64_cmpxchg() values to be returned, among other things. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06arch/tile: Shrink the tile-opcode files considerably.Chris Metcalf
The C file (tile-desc_{32,64}.c) was about 300KB before this change, and is now shrunk down to 100K. The original file included support for BFD in the binutils toolchain, which is not necessary in the kernel; the kernel version only needs to include enough support to enable the single-stepper and backtracer. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06arch/tile: Add driver to enable access to the user dynamic network.Chris Metcalf
This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-07-06arch/tile: Enable more sophisticated IRQ model for 32-bit chips.Chris Metcalf
This model is based on the on-chip interrupt model used by the TILE-Gx next-generation hardware, and interacts much more cleanly with the Linux generic IRQ layer. The change includes modifications to the Tilera hypervisor, which are reflected in the hypervisor headers in arch/tile/include/arch/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2010-06-07Revert adding some arch-specific signal syscalls to <linux/syscalls.h>.Chris Metcalf
It turns out there is some variance on the calling conventions for these syscalls, and <asm-generic/syscalls.h> is already the mechanism used to handle this. Switch arch/tile over to using that mechanism and tweak the calling conventions for a couple of tile syscalls to match <asm-generic/syscalls.h>. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-06-05arch/tile: Do not use GFP_KERNEL for dma_alloc_coherent().Chris Metcalf
Feedback from fujita.tomonori@lab.ntt.co.jp. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-06-04arch/tile: core support for Tilera 32-bit chips.Chris Metcalf
This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>