summaryrefslogtreecommitdiffstats
path: root/arch/x86/ia32
AgeCommit message (Collapse)Author
2008-10-16compat: generic compat get/settimeofdayChristoph Hellwig
Nothing arch specific in get/settimeofday. The details of the timeval conversion varied a little from arch to arch, but all with the same results. Also add an extern declaration for sys_tz to linux/time.h because externs in .c files are fowned upon. I'll kill the externs in various other files in a sparate patch. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ] Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16compat: move cp_compat_stat to common codeChristoph Hellwig
struct stat / compat_stat is the same on all architectures, so cp_compat_stat should be, too. Turns out it is, except that various architectures have slightly and some high2lowuid/high2lowgid or the direct assignment instead of the SET_UID/SET_GID that expands to the correct one anyway. This patch replaces the arch-specific cp_compat_stat implementations with a common one based on the x86-64 one. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ] Acked-by: Kyle McMartin <kyle@mcmartin.ca> [ parisc bits ] Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13x86-64: slightly stream-line 32-bit syscall entry codeJan Beulich
Avoid updating registers or memory twice as well as needlessly loading or copying registers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-12Merge branch 'linus' into x86/signalIngo Molnar
Conflicts: arch/x86/kernel/signal_64.c
2008-10-11Merge branch 'x86/unify-cpu-detect' into x86-v28-for-linus-phase4-DIngo Molnar
Conflicts: arch/x86/kernel/cpu/common.c arch/x86/kernel/signal_64.c include/asm-x86/cpufeature.h
2008-10-01x86: ia32_signal.c remove unnecessary function callsHiroshi Shimamoto
the below 2 functions are called in save_i387_xstate_ia32() - clear_used_math(); - stts(); Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-01x86: ia32_signal.c: remove unnecessary cast to u32Hiroshi Shimamoto
__put_user() looks type of the 2nd parameter, so casting the 1st parameter is not necessary. text data bss dec hex filename 6227 0 8 6235 185b ia32_signal.o.new 6227 0 8 6235 185b ia32_signal.o.old Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14x86: signal: remove unneeded err handlingHiroshi Shimamoto
This patch eliminates unused or unneeded variable handling. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14x86: signal: put give_sigsegv of setup frames togetherHiroshi Shimamoto
When setup frame fails, force_sigsegv is called and returns -EFAULT. There is similar code in ia32_setup_frame(), ia32_setup_rt_frame(), __setup_frame() and __setup_rt_frame(). Make them identical. No change in functionality intended. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: kill sys32_pauseChristoph Hellwig
It's an unused duplicate of the generic sys_pause. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06Merge branch 'x86/cleanups' into x86/signalIngo Molnar
Conflicts: arch/x86/kernel/signal_64.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20x86_64: use save/loadsegment in ia32 compatJeremy Fitzhardinge
Use savesegment and loadsegment consistently in ia32 compat code. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-30x86, xsave: save/restore the extended state context in sigframeSuresh Siddha
On cpu's supporting xsave/xrstor, fpstate pointer in the sigcontext, will include the extended state information along with fpstate information. Presence of extended state information is indicated by the presence of FP_XSTATE_MAGIC1 at fpstate.sw_reserved.magic1 and FP_XSTATE_MAGIC2 at fpstate + (fpstate.sw_reserved.extended_size - FP_XSTATE_MAGIC2_SIZE). Extended feature bit mask that is saved in the memory layout is represented by the fpstate.sw_reserved.xstate_bv For RT signal frames, UC_FP_XSTATE in the uc_flags also indicate the presence of extended state information in the sigcontext's fpstate pointer. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-30x86, xsave: reorganization of signal save/restore fpstate code layoutSuresh Siddha
move 64bit routines that saves/restores fpstate in/from user stack from signal_64.c to xsave.c restore_i387_xstate() now handles the condition when user passes NULL fpstate. Other misc changes for prepartion of xsave/xrstor sigcontext support. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-30x86, xsave: dynamically allocate sigframes fpstate instead of static allocationSuresh Siddha
dynamically allocate fpstate on the stack, instead of static allocation in the current sigframe layout on the user stack. This will allow the fpstate structure to grow in the future, which includes extended state information supporting xsave/xrstor. signal handlers will be able to access the fpstate pointer from the sigcontext structure asusual, with no change. For the non RT sigframe's (which are supported only for 32bit apps), current static fpstate layout in the sigframe will be unused(so that we don't change the extramask[] offset in the sigframe and thus prevent breaking app's which modify extramask[]). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26tracehook: execRoland McGrath
This moves all the ptrace hooks related to exec into tracehook.h inlines. This also lifts the calls for tracing out of the binfmt load_binary hooks into search_binary_handler() after it calls into the binfmt module. This change has no effect, since all the binfmt modules' load_binary functions did the call at the end on success, and now search_binary_handler() does it immediately after return if successful. We consolidate the repeated code, and binfmt modules no longer need to import ptrace_notify(). Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25x86_64: fix ia32 AMD syscall audit fast-pathRoland McGrath
The new code in commit 5cbf1565f29eb57a86a305b08836613508e294d7 has a bug in the version supporting the AMD 'syscall' instruction. It clobbers the user's %ecx register value (with the %ebp value). This change fixes it. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-24flag parameters add-on: remove epoll_create size paramUlrich Drepper
Remove the size parameter from the new epoll_create syscall and renames the syscall itself. The updated test program follows. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_epoll_create2 # ifdef __x86_64__ # define __NR_epoll_create2 291 # elif defined __i386__ # define __NR_epoll_create2 329 # else # error "need __NR_epoll_create2" # endif #endif #define EPOLL_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_epoll_create2, 0); if (fd == -1) { puts ("epoll_create2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("epoll_create2(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_epoll_create2, EPOLL_CLOEXEC); if (fd == -1) { puts ("epoll_create2(EPOLL_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24flag parameters: inotify_initUlrich Drepper
This patch introduces the new syscall inotify_init1 (note: the 1 stands for the one parameter the syscall takes, as opposed to no parameter before). The values accepted for this parameter are function-specific and defined in the inotify.h header. Here the values must match the O_* flags, though. In this patch CLOEXEC support is introduced. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_inotify_init1 # ifdef __x86_64__ # define __NR_inotify_init1 294 # elif defined __i386__ # define __NR_inotify_init1 332 # else # error "need __NR_inotify_init1" # endif #endif #define IN_CLOEXEC O_CLOEXEC int main (void) { int fd; fd = syscall (__NR_inotify_init1, 0); if (fd == -1) { puts ("inotify_init1(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("inotify_init1(0) set close-on-exit"); return 1; } close (fd); fd = syscall (__NR_inotify_init1, IN_CLOEXEC); if (fd == -1) { puts ("inotify_init1(IN_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24flag parameters: pipeUlrich Drepper
This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24flag parameters: dup2Ulrich Drepper
This patch adds the new dup3 syscall. It extends the old dup2 syscall by one parameter which is meant to hold a flag value. Support for the O_CLOEXEC flag is added in this patch. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_dup3 # ifdef __x86_64__ # define __NR_dup3 292 # elif defined __i386__ # define __NR_dup3 330 # else # error "need __NR_dup3" # endif #endif int main (void) { int fd = syscall (__NR_dup3, 1, 4, 0); if (fd == -1) { puts ("dup3(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("dup3(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC); if (fd == -1) { puts ("dup3(O_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("dup3(O_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24flag parameters: epoll_createUlrich Drepper
This patch adds the new epoll_create2 syscall. It extends the old epoll_create syscall by one parameter which is meant to hold a flag value. In this patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec flag for the returned file descriptor to be set. A new name EPOLL_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_epoll_create2 # ifdef __x86_64__ # define __NR_epoll_create2 291 # elif defined __i386__ # define __NR_epoll_create2 329 # else # error "need __NR_epoll_create2" # endif #endif #define EPOLL_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_epoll_create2, 1, 0); if (fd == -1) { puts ("epoll_create2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("epoll_create2(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_epoll_create2, 1, EPOLL_CLOEXEC); if (fd == -1) { puts ("epoll_create2(EPOLL_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24flag parameters: eventfdUlrich Drepper
This patch adds the new eventfd2 syscall. It extends the old eventfd syscall by one parameter which is meant to hold a flag value. In this patch the only flag support is EFD_CLOEXEC which causes the close-on-exec flag for the returned file descriptor to be set. A new name EFD_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_eventfd2 # ifdef __x86_64__ # define __NR_eventfd2 290 # elif defined __i386__ # define __NR_eventfd2 328 # else # error "need __NR_eventfd2" # endif #endif #define EFD_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_eventfd2, 1, 0); if (fd == -1) { puts ("eventfd2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("eventfd2(0) sets close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC); if (fd == -1) { puts ("eventfd2(EFD_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24flag parameters: signalfdUlrich Drepper
This patch adds the new signalfd4 syscall. It extends the old signalfd syscall by one parameter which is meant to hold a flag value. In this patch the only flag support is SFD_CLOEXEC which causes the close-on-exec flag for the returned file descriptor to be set. A new name SFD_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_signalfd4 # ifdef __x86_64__ # define __NR_signalfd4 289 # elif defined __i386__ # define __NR_signalfd4 327 # else # error "need __NR_signalfd4" # endif #endif #define SFD_CLOEXEC O_CLOEXEC int main (void) { sigset_t ss; sigemptyset (&ss); sigaddset (&ss, SIGUSR1); int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0); if (fd == -1) { puts ("signalfd4(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("signalfd4(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC); if (fd == -1) { puts ("signalfd4(SFD_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23x86_64 ia32 syscall audit fast-pathRoland McGrath
This adds fast paths for 32-bit syscall entry and exit when TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing. These paths does not need to save and restore all registers as the general case of tracing does. Avoiding the iret return path when syscall audit is enabled helps performance a lot. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-21Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', ↵Ingo Molnar
'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus
2008-07-18x86_64: ia32_signal.c: remove signal number conversionHiroshi Shimamoto
This was old code that was needed for iBCS and x86-64 never supported that. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86_64: ia32_signal.c: use macro instead of immediateHiroshi Shimamoto
Make and use macro FIX_EFLAGS, instead of immediate value 0x40DD5 in ia32_restore_sigcontext(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16x86 ptrace: unify syscall tracingRoland McGrath
This unifies and cleans up the syscall tracing code on i386 and x86_64. Using a single function for entry and exit tracing on 32-bit made the do_syscall_trace() into some terrible spaghetti. The logic is clear and simple using separate syscall_trace_enter() and syscall_trace_leave() functions as on 64-bit. The unification adds PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP support on x86_64, for 32-bit ptrace() callers and for 64-bit ptrace() callers tracing either 32-bit or 64-bit tasks. It behaves just like 32-bit. Changing syscall_trace_enter() to return the syscall number shortens all the assembly paths, while adding the SYSEMU feature in a simple way. Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-16x86_64: adjust exception frame in ia32entryJeremy Fitzhardinge
The 32-bit compat int $0x80 entrypoint needs exception frame adjustment. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: rename threadinfo to TI.Glauber Costa
This is for consistency with i386. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86/paravirt: groundwork for 64-bit Xen support, fixJeremy Fitzhardinge
Ingo Molnar wrote: > * Jeremy Fitzhardinge <jeremy@goop.org> wrote: > > >>> It quickly broke the build in testing: >>> >>> include/asm/pgalloc.h: In function ‘paravirt_pgd_free': >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> arch/x86/kernel/entry_64.S: In file included from >>> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function >>> ‘paravirt_pgd_free': >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> >>> >> No, looks like my fault. The non-PARAVIRT version of >> paravirt_pgd_free() is: >> >> static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *) {} >> >> but C doesn't like missing parameter names, even if unused. >> >> This should fix it: >> > > that fixed the build but now we've got a boot crash with this config: > > time.c: Detected 2010.304 MHz processor. > spurious 8259A interrupt: IRQ7. > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<0000000000000000>] > PGD 0 > Thread overran stack, or stack corrupted > Oops: 0010 [1] SMP > CPU 0 > > with: > > http://redhat.com/~mingo/misc/config-Thu_Jun_26_12_46_46_CEST_2008.bad > Use SWAPGS_UNSAFE_STACK in ia32entry.S in the places where the active stack is the usermode stack. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86, 64-bit: ia32entry: replace privileged instructions with pvopsJeremy Fitzhardinge
Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86/paravirt: add sysret/sysexit pvops for returning to 32-bit compatibility ↵Jeremy Fitzhardinge
userspace In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-19x86-64: remove unnecessary ptregs call stubsJan Beulich
Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: "Andi Kleen" <andi@firstfloor.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-30signals: x86 TS_RESTORE_SIGMASKRoland McGrath
Replace TIF_RESTORE_SIGMASK with TS_RESTORE_SIGMASK and define our own set_restore_sigmask() function. This saves the costly SMP-safe set_bit operation, which we do not need for the sigmask flag since TIF_SIGPENDING always has to be set too. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-26x86_64 ia32 ptrace: convert to compat_arch_ptraceRoland McGrath
Now that there are no more special cases in sys32_ptrace, we can convert to using the generic compat_sys_ptrace entry point. The sys32_ptrace function gets simpler and becomes compat_arch_ptrace. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86 signals: lift set_fsRoland McGrath
This lifts the set_fs(USER_DS) call for signal handler setup out of the three places copying the same code into the one place that calls them all. There is no change in what it does. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86 signals: lift flags diddling codeRoland McGrath
This lifts the code diddling the TF and DF bits for signal handler setup out of the several places copying the same code into the one place that calls them all. There is no change in what it does. I also separated the recently-added DF bit clearing from the TF diddling. The compiler turns them back into one instruction anyway. The tossing in of DF to the same line of code with no new comments was a bit more arcane than seems wise. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-18arch: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-17x86: sys32_execve PT_DTRACERoland McGrath
The PT_DTRACE flag is meaningless and obsolete. Don't touch it. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: ia32 ptrace vs -ENOSYS sysenter/syscallRoland McGrath
The previous "x86_64 ia32 ptrace vs -ENOSYS" fix only covered the int $0x80 system call entries. This does the same fix for the sysenter and syscall instruction paths. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: ia32 ptrace vs -ENOSYSRoland McGrath
When we're stopped at syscall entry tracing, ptrace can change the %eax value from -ENOSYS to something else. If no system call is actually made because the syscall number (now in orig_eax) is bad, then the %eax value set by ptrace should be returned to the user. But, instead it gets reset to -ENOSYS again. This is a regression from the native 32-bit kernel. This change fixes it by leaving the return value alone after entry tracing. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: reducing debuginfo size by removing unneeded includesArnaldo Carvalho de Melo
I found it strange that the struct sk_buff definition was found inside the DWARF debugging sections in the generated object, so I verified and found that there is no need for the files that bring struct sk_buff definition into this file and verified also that sk_buff is not brought in indirectly too, thru other headers. I went on and removed many other unneeded includes and the end result is: [acme@doppio net-2.6]$ l /tmp/sys_ia32.o.before /tmp/sys_ia32.o.after -rw-rw-r-- 1 acme acme 185240 2008-02-06 19:19 /tmp/sys_ia32.o.after -rw-rw-r-- 1 acme acme 248328 2008-02-06 19:00 /tmp/sys_ia32.o.before Almost 64KB only on this object file! There were no other side effects from this change: [acme@doppio net-2.6]$ objcopy -j "text" /tmp/sys_ia32.o.before /tmp/text.before [acme@doppio net-2.6]$ objcopy -j "text" /tmp/sys_ia32.o.after /tmp/text.after [acme@doppio net-2.6]$ md5sum /tmp/text.before /tmp/text.after b7ac9b17942add68494e698e4f965d36 /tmp/text.before b7ac9b17942add68494e698e4f965d36 /tmp/text.after One of the complaints about using tools such as systemtap is that one has to install the huge kernel-debuginfo package: [acme@doppio net-2.6]$ rpm -q --qf "%{size}\n" kernel-rt-debuginfo 471737710 543867594 [acme@doppio net-2.6]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-17x86 vDSO: don't use disabled vDSO for signal trampolineRoland McGrath
If the vDSO was not mapped, don't use it as the "restorer" for a signal handler. Whether we have a pointer in mm->context.vdso depends on what happened at exec time, so we shouldn't check any global flags now. Background: Currently, every 32-bit exec gets the vDSO mapped even if it's disabled (the process just doesn't get told about it). Because it's in fact always there, the bug that this patch fixes cannot happen now. With the second patch, it won't be mapped at all when it's disabled, which is one of the things that people might really want when they disable it (so nothing they didn't ask for goes into their address space). The 32-bit signal handler setup when SA_RESTORER is not used refers to current->mm->context.vdso without regard to whether the vDSO has been disabled when the process was exec'd. This patch fixes this not to use it when it's null, which becomes possible after the second patch. (This never happens in normal use, because glibc's sigaction call uses SA_RESTORER unless glibc detected the vDSO.) Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07x86: clear DF before calling signal handlerAurelien Jarno
The Linux kernel currently does not clear the direction flag before calling a signal handler, whereas the x86/x86-64 ABI requires that. Linux had this behavior/bug forever, but this becomes a real problem with gcc version 4.3, which assumes that the direction flag is correctly cleared at the entry of a function. This patches changes the setup_frame() functions to clear the direction before entering the signal handler. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: H. Peter Anvin <hpa@zytor.com>
2008-02-07Sanitize the type of struct user.u_ar0H. Peter Anvin
struct user.u_ar0 is defined to contain a pointer offset on all architectures in which it is defined (all architectures which define an a.out format except SPARC.) However, it has a pointer type in the headers, which is pointless -- <asm/user.h> is not exported to userspace, and it just makes the code messy. Redefine the field as "unsigned long" (which is the same size as a pointer on all Linux architectures) and change the setting code to user offsetof() instead of hand-coded arithmetic. Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Lennert Buytenhek <kernel@wantstofly.org> Cc: Håvard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05timerfd: wire the new timerfd API to the x86 familyDavide Libenzi
Wires up the new timerfd API to the x86 family. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30x86: remove unneded castsJan Engelhardt
x86: remove unneeded casts Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30x86: coding style fixes in arch/x86/ia32/audit.cPaolo Ciarrocchi
Fix one error reported by checkpatch, it now reports: total: 0 errors, 0 warnings, 42 lines checked Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>