summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic
AgeCommit message (Collapse)Author
2011-07-22Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabled x86, ioapic: Print IRTE when IR is enabled x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSR x86, ioapic: Also print Dest field x86, ioapic: Format clean up for IOAPIC output x86: print APIC data a little later during boot
2011-07-22Merge branch 'timers-cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mips: Fix i8253 clockevent fallout i8253: Cleanup outb/inb magic arm: Footbridge: Use common i8253 clockevent mips: Use common i8253 clockevent x86: Use common i8253 clockevent i8253: Create common clockevent implementation i8253: Export i8253_lock unconditionally pcpskr: MIPS: Make config dependencies finer grained pcspkr: Cleanup Kconfig dependencies i8253: Move remaining content and delete asm/i8253.h i8253: Consolidate definitions of PIT_LATCH x86: i8253: Consolidate definitions of global_clock_event i8253: Alpha, PowerPC: Remove unused asm/8253pit.h alpha: i8253: Cleanup remaining users of i8253pit.h i8253: Remove I8253_LOCK config i8253: Make pcsp sound driver use the shared i8253_lock i8253: Make pcspkr input driver use the shared i8253_lock i8253: Consolidate all kernel definitions of i8253_lock i8253: Unify all kernel declarations of i8253_lock i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-12x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabledNaga Chumbalkar
When IR (interrupt remapping) is enabled print_IO_APIC() displays output according to legacy RTE (redirection table entry) definitons: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 01 02 00 0 0 0 0 0 0 0 02 03 00 1 0 0 0 0 0 0 03 04 00 1 0 0 0 0 0 0 04 05 00 1 0 0 0 0 0 0 05 06 00 1 0 0 0 0 0 0 06 ... The above output is as per Sec 3.2.4 of the IOAPIC datasheet: 82093AA I/O Advanced Programmable Interrupt Controller (IOAPIC): http://download.intel.com/design/chipsets/datashts/29056601.pdf Instead the output should display the fields as discussed in Sec 5.5.1 of the VT-d specification: (Intel Virtualization Technology for Directed I/O: http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf) After the fix: NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect: 00 0000 0 1 0 0 0 0 0 0 00 01 000F 1 0 0 0 0 0 0 0 01 02 0001 1 0 0 0 0 0 0 0 02 03 0002 1 1 0 0 0 0 0 0 03 04 0011 1 1 0 0 0 0 0 0 04 05 0004 1 1 0 0 0 0 0 0 05 06 0005 1 1 0 0 0 0 0 0 06 ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211658.2939.93123.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12x86, ioapic: Print IRTE when IR is enabledNaga Chumbalkar
When "apic=debug" is used as a boot parameter, Linux prints the IOAPIC routing entries in "dmesg". Below is output from IOAPIC whose apic_id is 8: # dmesg | grep "routing entry" IOAPIC[8]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Similarly, when IR (interrupt remapping) is enabled, and the IRTE (interrupt remapping table entry) is set up we should display it. After the fix: # dmesg | grep IRTE IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:31 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:33 Dest:00000000 SID:00F1 SQ:0 SVT:1) ... The IRTE is defined in Sec 9.5 of the Intel VT-d Specification. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211704.2939.71291.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSRNaga Chumbalkar
If there's no special reason to zero-out the "high" 32-bits of the IA32_APIC_BASE MSR, let's preserve it. The x2APIC Specification doesn't explicitly state any such requirement. (Sec 2.2 in: http://www.intel.com/Assets/PDF/manual/318148.pdf). Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712055831.2498.78521.sendpatchset@nchumbalkar.americas.cpqcorp.net Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-11x86, ioapic: Also print Dest fieldNaga Chumbalkar
The code in setup_ioapic_irq() determines the Destination Field, so why not also include it in the debug printk output that gets displayed when the boot parameter "apic=debug" is used. Before the change, "dmesg" will show: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) ... After the change, you will see: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184603.2734.91071.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-11x86, ioapic: Format clean up for IOAPIC outputNaga Chumbalkar
When IOAPIC data is displayed in "dmesg" with the help of the boot parameter "apic=debug" certain values are not formatted correctly wrt their size. In the "dmesg" snippet below, note that the output for "max redirection entries", and "IO APIC version" which are each defined to be just 8-bits long are displayed as 2 bytes in length. Similarly, "Dst" under the "IRQ redirection table" should only be 8-bits long. IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 ... ... Do some formatting clean up, so you will see output like below: IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 31 02 00 0 0 0 0 0 0 0 30 03 00 1 0 0 0 0 0 0 33 ... ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184557.2734.61830.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-08x86: print APIC data a little later during bootNaga Chumbalkar
To view IOAPIC data you could boot with "apic=debug". When booting in such a way then the kernel will dump the IO-APIC's registers, for example: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 0 0 0 0 0 0 0 33 04 000 0 0 0 0 0 0 0 34 05 000 0 0 0 0 0 0 0 35 06 000 0 0 0 0 0 0 0 36 07 000 0 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 0 0 0 0 0 0 0 3A 0b 000 0 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 0 0 0 0 0 0 0 3D 0e 000 0 0 0 0 0 0 0 3E 0f 000 0 0 0 0 0 0 0 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 Delaying the call to print_ICs() gives better results: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 04 000 1 0 0 0 0 0 0 34 05 000 1 0 0 0 0 0 0 35 06 000 1 0 0 0 0 0 0 36 07 000 1 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 1 0 0 0 0 0 0 3A 0b 000 1 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 1 0 0 0 0 0 0 3D 0e 000 1 0 0 0 0 0 0 3E 0f 000 1 0 0 0 0 0 0 3F 10 000 1 1 0 1 0 0 0 29 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 0 1 0 1 0 0 0 51 15 000 1 0 0 0 0 0 0 00 16 000 0 1 0 1 0 0 0 61 17 000 0 1 0 1 0 0 0 59 Notice that the entries beyond interrupt input signal 0x0f also get populated and arent just the hw-initialization default of all zeroes. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708083555.2598.42216.sendpatchset@nchumbalkar.americas.hpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-14Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Compare only lower 32 bits of framebuffer map offsets drm/i915: Don't leak in i915_gem_shmem_pread_slow() drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit drm/radeon/kms: fix mac g5 quirk x86/uv/x2apic: update for change in pci bridge handling. alpha, drm: Remove obsolete Alpha support in MGA DRM code alpha/drm: Cleanup Alpha support in DRM generic code savage: remove unnecessary if statement drm/radeon: fix GUI idle IH debug statements drm/radeon/kms: check modes against max pixel clock drm: fix fbs in DRM_IOCTL_MODE_GETRESOURCES ioctl
2011-06-14x86/uv/x2apic: update for change in pci bridge handling.Dave Airlie
When I added 3448a19da479b6bd1e28e2a2be9fa16c6a6feb39 I forgot about the special uv handling code for this, so this patch fixes it up. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ingo Molnar Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-09x86: i8253: Consolidate definitions of global_clock_eventRalf Baechle
There are multiple declarations of global_clock_event in header files specific to particular clock event implementations. Consolidate them in <asm/time.h> and make sure all users include that header. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Venkatesh Pallipadi (Venki) <venki@google.com> Link: http://lkml.kernel.org/r/20110601180610.762763451@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09i8253: Create linux/i8253.h and use it in all 8253 related filesRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> arch/arm/mach-footbridge/isa-timer.c | 2 +- arch/mips/cobalt/time.c | 2 +- arch/mips/jazz/irq.c | 2 +- arch/mips/kernel/i8253.c | 2 +- arch/mips/mti-malta/malta-time.c | 2 +- arch/mips/sgi-ip22/ip22-time.c | 2 +- arch/mips/sni/time.c | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apm_32.c | 2 +- arch/x86/kernel/hpet.c | 2 +- arch/x86/kernel/i8253.c | 2 +- arch/x86/kernel/time.c | 2 +- drivers/block/hd.c | 2 +- drivers/clocksource/i8253.c | 2 +- drivers/input/gameport/gameport.c | 2 +- drivers/input/joystick/analog.c | 2 +- drivers/input/misc/pcspkr.c | 2 +- include/linux/i8253.h | 11 +++++++++++ sound/drivers/pcsp/pcsp.h | 2 +- 19 files changed, 29 insertions(+), 18 deletions(-)
2011-06-08Merge branch 'urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-05-30oprofile, x86: Add comments to IBS LVT offset initializationRobert Richter
Adding a comment in the code as IBS LVT setup is not obvious at all ... Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-25x86, UV: Add support for SGI UV2 hub chipJack Steiner
This patch adds support for a new version of the SGI UV hub chip. The hub chip is the node controller that connects multiple blades into a larger coherent SSI. For the most part, UV2 is compatible with UV1. The majority of the changes are in the addresses of MMRs and in a few cases, the contents of MMRs. These changes are the result in changes in the system topology such as node configuration, processor types, maximum nodes, physical address sizes, etc. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-24x86, ioapic: Restore ioapic entries during resume properlySuresh Siddha
In mask/restore_ioapic_entries() we should be restoring ioapic entries when ioapics[apic].saved_registers is not NULL. Fix the typo and address the resume hang regression reported by Linus. This was not found sooner because the systems where these changes were tested on kept the IO-APIC entries intact over resume. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Daniel J Blueman <daniel.blueman@gmail.com> Link: http://lkml.kernel.org/r/1306259131.7171.7.camel@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Include module.h header in apic_flat_64.c x86, apic: Make apic drivers static x86, apic: Clean up bigsmp apic selection code x86, apic: Use .apicdrivers section for the apic drivers list x86, apic: Introduce .apicdrivers section to find the list of apic drivers x86, x2apic: Move the common bits to x2apic.h x86, x2apic: Minimize IPI register writes using cluster groups x86, x2apic: Track the x2apic cluster sibling map x86, x2apic: Remove duplicate code for IPI mask routines x86, apic: Use probe routines to simplify apic selection x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic' x86, ioapic: Consolidate gsi routing info into 'struct ioapic' x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic' x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic' x86, ioapic: Add struct ioapic x86, ioapic: Remove duplicate code for saving/restoring RTEs x86, ioapic: Use ioapic_saved_data while enabling intr-remapping x86, ioapic: Allocate ioapic_saved_data early x86, ioapic: Fix potential resume deadlock
2011-05-23x86, apic: Include module.h header in apic_flat_64.cRandy Dunlap
apic_flat_64.c needs to include module.h because it uses EXPORT_SYMBOL_GPL(). This fixes these warnings on some !SMP randconfigs: arch/x86/kernel/apic/apic_flat_64.c:31: warning: data definition has no type or storage class arch/x86/kernel/apic/apic_flat_64.c:31: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/kernel/apic/apic_flat_64.c:31: warning: parameter names (without types) in function declaration Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20110523104300.dd532a99.randy.dunlap@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23watchdog: Change the default timeout and configure nmi watchdog period based ↵Mandeep Singh Baines
on watchdog_thresh Before the conversion of the NMI watchdog to perf event, the watchdog timeout was 5 seconds. Now it is 60 seconds. For my particular application, netbooks, 5 seconds was a better timeout. With a short timeout, we catch faults earlier and are able to send back a panic. With a 60 second timeout, the user is unlikely to wait and will instead hit the power button, causing us to lose the panic info. This change configures the NMI period to watchdog_thresh and sets the softlockup_thresh to watchdog_thresh * 2. In addition, watchdog_thresh was reduced to 10 seconds as suggested by Ingo Molnar. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1306127423-3347-4-git-send-email-msb@chromium.org Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-22x86, apic: Make apic drivers staticSuresh Siddha
Apic probe now looks at the apic drivers listed in the .apicdrivers section. Remove apic_probe[] and make each apic driver static. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Clean up bigsmp apic selection codeSuresh Siddha
Make generic_bigsmp_probe() return struct apic *. This will avoid exporting apic_bigsmp, which will be consistent with others. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.252703851@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Use .apicdrivers section for the apic drivers listSuresh Siddha
This will eliminate the need for apic_probe[], as the probing now will happen based on the apic drivers order in the .apcidrivers section. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.164277071@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Introduce .apicdrivers section to find the list of apic driversSuresh Siddha
This will pave the way for each apic driver to be self-contained and eliminate the need for apic_probe[]. Order in which apic drivers are listed in the .apicdrivers section is important, as this determines the apic probe order. And this is enforced by the ordering of apic driver files in the Makefile and the macros apic_driver()/apic_drivers(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.068775085@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Move the common bits to x2apic.hCyrill Gorcunov
To eliminate code duplication. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.591426753@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Minimize IPI register writes using cluster groupsCyrill Gorcunov
In the case of x2apic cluster mode we can group IPI register writes based on the cluster group instead of individual per-cpu destination messages. This reduces the apic register writes and reduces the amount of IPI messages (in the best case we can reduce it by a factor of 16). With this change, the cost of flush_tlb_others(), with the flush tlb IPI being sent from a cpu in the socket-1 to all the logical cpus in socket-2 (on a Westmere-EX system that has 20 logical cpus in a socket) is 3x times better now (compared to the former 'send one-by-one' algorithm). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.512271057@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Track the x2apic cluster sibling mapCyrill Gorcunov
In the case of x2apic cluster mode, we can group IPI register writes based on the cluster group instead of individual per-cpu destination messages. For this purpose, track the cpu's that belong to the same x2apic cluster. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.421800999@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, x2apic: Remove duplicate code for IPI mask routinesSuresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.337024125@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, apic: Use probe routines to simplify apic selectionSuresh Siddha
Use the unused probe routine in the apic driver to finalize the apic model selection. This cleans up the default_setup_apic_routing() and this probe routine in future can also be used for doing any apic model specific initialisation. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233158.089978277@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate gsi routing info into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.994002011@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic'Suresh Siddha
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.830697056@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Add struct ioapicSuresh Siddha
Introduce struct ioapic with nr_registers field. This will pave way for consolidating different MAX_IO_APICS arrays into it. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: daniel.blueman@gmail.com Link: http://lkml.kernel.org/r/20110518233157.744315519@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Remove duplicate code for saving/restoring RTEsSuresh Siddha
Code flow for enabling interrupt-remapping has its own routines for saving and restoring io-apic RTE's. ioapic suspend/resume code flow also has similar routines. Remove the duplicate code. Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110518233157.673130611@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Use ioapic_saved_data while enabling intr-remappingSuresh Siddha
Code flow for enabling interrupt-remapping was allocating/freeing buffers for saving/restoring io-apic RTE's. ioapic suspend/resume code uses boot time allocated ioapic_saved_data that is a perfect match for reuse here. This will remove the unnecessary allocation/free of the temporary buffers during suspend/resume of interrupt-remapping enabled platforms aswell as paving the way for further code consolidation. Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110518233157.574469296@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Allocate ioapic_saved_data earlySuresh Siddha
This allows re-using this buffer for enabling interrupt-remapping during boot and resume. And thus allow for consolidating the code between ioapic suspend/resume and interrupt-remapping. Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/20110518233157.481404505@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20x86, ioapic: Fix potential resume deadlockDaniel J Blueman
Fix a potential deadlock when resuming; here the calling function has disabled interrupts, so we cannot sleep. Change the memory allocation flag from GFP_KERNEL to GFP_ATOMIC. TODO: We can do away with this memory allocation during resume by reusing the ioapic suspend/resume code that uses boot time allocated buffers, but we want to keep this -stable patch simple. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: <stable@kernel.org> # v2.6.38/39 Link: http://lkml.kernel.org/r/20110518233157.385970138@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-19Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits) x86, mm: Allow ZONE_DMA to be configurable x86, NUMA: Trim numa meminfo with max_pfn in a separate loop x86, NUMA: Rename setup_node_bootmem() to setup_node_data() x86, NUMA: Enable emulation on 32bit too x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too x86, NUMA: Rename amdtopology_64.c to amdtopology.c x86, NUMA: Make numa_init_array() static x86, NUMA: Make 32bit use common NUMA init path x86, NUMA: Initialize and use remap allocator from setup_node_bootmem() x86-32, NUMA: Add @start and @end to init_alloc_remap() x86, NUMA: Remove long 64bit assumption from numa.c x86, NUMA: Enable build of generic NUMA init code on 32bit x86, NUMA: Move NUMA init logic from numa_64.c to numa.c x86-32, NUMA: Update numaq to use new NUMA init protocol x86-32, NUMA: Replace srat_32.c with srat.c x86-32, NUMA: implement temporary NUMA init shims x86, NUMA: Move numa_nodes_parsed to numa.[hc] x86-32, NUMA: Move get_memcfg_numa() into numa_32.c x86, NUMA: make srat.c 32bit safe x86, NUMA: rename srat_64.c to srat.c ...
2011-05-19Merge branches 'x86-apic-for-linus', 'x86-asm-for-linus' and ↵Linus Torvalds
'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Print verbose error interrupt reason on apic=debug * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Demacro CONFIG_PARAVIRT cpu accessors * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix mrst sparse complaints x86: Fix spelling error in the memcpy() source code comment x86, mpparse: Remove unnecessary variable
2011-05-10x86, UV: Fix NMI handler for UV platformsJack Steiner
This fixes problems seen on UV systems handling NMIs from the node controller. I isolated the "dazed..." messages that I saw earlier to a bug in the BMC on our platform. It was sending NMIs w/o properly setting a register that indicated the source of NMI. So rather than _assuming_ any unhandled NMI came from the UV system maintenance console (SMC), add a check to verify that the SMC actually sent the NMI. Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: gorcunov@gmail.com Cc: dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-02x86-32, NUMA: Update numaq to use new NUMA init protocolTejun Heo
Update numaq such that it calls numa_add_memblk() and sets numa_nodes_parsed instead of directly diddling with NUMA states. The original get_memcfg_numaq() is renamed to numaq_numa_init() and new get_memcfg_numaq() is created in numa_32.c. The shim numa_add_memblk() implementation handles node_start/end_pfn[] and node_set_online() for nodes with memory. The new get_memcfg_numaq() exactly the same with get_memcfg_from_srat() other than calling the numaq init function. Things get_memcfgs_numaq() do are not strictly necessary for numaq but added for consistency and to help unifying NUMA init handling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86-32, NUMA: use sparse_memory_present_with_active_regions()Tejun Heo
Instead of calling memory_present() for each region from NUMA init, call sparse_memory_present_with_active_regions() from paging_init() similarly to x86-64. For flat and numaq, this results in exactly the same memory_present() calls. For srat, if there are multiple memory chunks for a node, after this change, memory_present() will be called separately for each chunk instead of being called once to encompass the whole range, which doesn't cause any harm and actually is the better behavior. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86-32, NUMA: Make apic->x86_32_numa_cpu_node() optionalTejun Heo
NUMAQ is the only meaningful user of this callback and setup_local_APIC() the only callsite. Stop torturing everyone else by making the callback optional and removing all the boilerplate implementations and assignments. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86-32, NUMA: Automatically set apicid -> node in setup_local_APIC()Tejun Heo
Some x86-32 NUMA implementations (NUMAQ) don't initialize apicid -> node mapping using set_apicid_to_node() during NUMA init but implement custom apic->x86_32_numa_cpu_node() instead. This patch automatically initializes the default apic -> node mapping table from apic->x86_32_numa_cpu_node() from setup_local_APIC() such that the mapping table is in sync with the actual mapping. As the table isn't used by custom implementations, this doesn't make any difference at this point. This is in preparation of unifying numa_cpu_node() between x86-32 and 64. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02Merge branch 'x86/urgent' into x86-mmTejun Heo
Merge reason: Pick up the following two fix commits. 2be19102b7: x86, NUMA: Fix empty memblk detection in numa_cleanup_meminfo() 765af22da8: x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change Scheduled NUMA init 32/64bit unification changes depend on these. Signed-off-by: Tejun Heo <tj@kernel.org>
2011-05-02Merge branch 'x86/numa' into x86-mmTejun Heo
Merge reason: Pick up x86-32 remap allocator cleanup changes - 14 commits, 3fe14ab541^..993ba1585c. 3fe14ab541: x86-32, numa: Fix failure condition check in alloc_remap() 993ba1585c: x86-32, numa: Update remap allocator comments Scheduled NUMA init 32/64bit unification changes depend on them. Signed-off-by: Tejun Heo <tj@kernel.org>
2011-04-28x86: devicetree: Configure IOAPIC pin only onceSebastian Andrzej Siewior
We use io_apic_setup_irq_pin() in order to configure pin's interrupt number polarity and type. This is done on every irq_create_of_mapping() which happens for instance during pci enable calls. Level typed interrupts are masked by default, edge are unmasked. On the first ->xlate() call the level interrupt is configured and masked. The driver calls request_irq() and the line is unmasked. Lets assume the interrupt line is shared with another device and we call pci_enable_device() for this device. The ->xlate() configures the pin again and it is masked. request_irq() does not unmask the line because it _is_ already unmasked according to its internal state. So the interrupt will never be unmasked again. This patch is based on an earlier work by Torben Hohn and solves the problem by configuring the pin only once. Since all devices must agree on the same type and polarity there is no point in configuring the pin more than once. [ tglx: Split out the ce4100 part into a separate patch ] Cc: Torben Hohn <torbenh@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: http://lkml.kernel.org/r/%3C20110427143052.GA15211%40linutronix.de%3E Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-04-19x86, apic: Print verbose error interrupt reason on apic=debugYouquan Song
End users worry about the error interrupt printout we generate currently: pr_debug("APIC error on CPU%d: %02x(%02x)\n", smp_processor_id(), v , v1); ... and would like to know the reason why error interrupts are generated. This patch prints out more detailed debug information. Another practical problem is that dynamic debug is not initialized yet when the APIC initializes, so the pr_debug() will not output the error interrupt debug information on bootup. In this patch, we use apic_printk(APIC_DEBUG, ...), so the apic=debug boot option will print verbose error interupts during bootup. Signed-off-by: Youquan Song <youquan.song@intel.com> Cc: Joe Perches <joe@perches.com> Cc: hpa@linux.intel.com Cc: suresh.b.siddha@intel.com Cc: yong.y.wang@linux.intel.com Cc: jbaron@redhat.com Cc: trenn@suse.de Cc: kent.liu@intel.com Cc: chaohong.guo@intel.com Link: http://lkml.kernel.org/r/1302762968-24380-2-git-send-email-youquan.song@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-06x86-32, numa: Calculate remap size in common codeTejun Heo
Only pgdat and memmap use remap area and there isn't much benefit in allowing per-node override. In addition, the use of node_remap_size[] is confusing in that it contains number of bytes before remap initialization and then number of pages afterwards. Move remap size calculation for memap from specific NUMA config implementations to init_alloc_remap() and make node_remap_size[] static. The only behavior difference is that, before this patch, numaq_32 didn't consider max_pfn when calculating the memmap size but it's enforced after this patch, which is the right thing to do. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-8-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-03-31x86, UV: Fix kdump rebootCliff Wickman
After a crash dump on an SGI Altix UV system the crash kernel fails to cause a reboot. EFI mode is disabled in the kdump kernel, so only the reboot_type of BOOT_ACPI works. Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: rja@sgi.com LKML-Reference: <E1Q5Iuo-00013b-UK@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-20 22:36:42 +0000