summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/head32.c
AgeCommit message (Collapse)Author
2011-12-08memblock: Kill memblock_init()Tejun Heo
memblock_init() initializes arrays for regions and memblock itself; however, all these can be done with struct initializers and memblock_init() can be removed. This patch kills memblock_init() and initializes memblock with struct initializer. The only difference is that the first dummy entries don't have .nid set to MAX_NUMNODES initially. This doesn't cause any behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-07-14memblock, x86: Replace memblock_x86_reserve/free_range() with generic onesTejun Heo
Other than sanity check and debug message, the x86 specific version of memblock reserve/free functions are simple wrappers around the generic versions - memblock_reserve/free(). This patch adds debug messages with caller identification to the generic versions and replaces x86 specific ones and kills them. arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty after this change and removed. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-05-19Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Introduce pci_map_biosrom() x86, olpc: Use device tree for platform identification
2011-03-15x86: Introduce pci_map_biosrom()Dan Williams
The isci driver needs to retrieve its preboot OROM image which contains necessary runtime parameters like platform specific sas addresses and phy configuration. There is no ROM BAR associated with this area, instead we will need to scan legacy expansion ROM space. 1/ Promote the probe_roms_32 implementation to x86-64 2/ Add a facility to find and map an adapter rom by pci device (according to PCI Firmware Specification Revision 3.0) Signed-off-by: Dave Jiang <dave.jiang@intel.com> LKML-Reference: <20110308183226.6246.90354.stgit@localhost6.localdomain6> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-02-17x86, trampoline: Common infrastructure for low memory trampolinesH. Peter Anvin
Common infrastructure for low memory trampolines. This code installs the trampolines permanently in low memory very early. It also permits multiple pieces of code to be used for this purpose. This code also introduces a standard infrastructure for computing symbol addresses in the trampoline code. The only change to the actual SMP trampolines themselves is that the 64-bit trampoline has been made reusable -- the previous version would overwrite the code with a status variable; this moves the status variable to a separate location. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> LKML-Reference: <4D5DFBE4.7090104@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthieu Castet <castet.matthieu@free.fr> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2010-11-12x86: Add CE4100 platform supportThomas Gleixner
Add CE4100 platform support. CE4100 needs early setup like moorestown. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-22Merge branch 'x86-trampoline-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-trampoline-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, mm: Add an initial page table for core bootstrapping
2010-10-20x86-32, mm: Add an initial page table for core bootstrappingBorislav Petkov
This patch adds an initial page table with low mappings used exclusively for booting APs/resuming after ACPI suspend/machine restart. After this, there's no need to add low mappings to swapper_pg_dir and zap them later or create own swsusp PGD page solely for ACPI sleep needs - we have initial_page_table for that. Signed-off-by: Borislav Petkov <bp@alien8.de> LKML-Reference: <20101020070526.GA9588@liondog.tnic> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-31Merge commit 'v2.6.36-rc3' into x86/memblockIngo Molnar
Conflicts: arch/x86/kernel/trampoline.c mm/memblock.c Merge reason: Resolve the conflicts, update to latest upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-27x86, memblock: Replace e820_/_early string with memblock_Yinghai Lu
1.include linux/memblock.h directly. so later could reduce e820.h reference. 2 this patch is done by sed scripts mainly -v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-27x86: Use memblock to replace early_resYinghai Lu
1. replace find_e820_area with memblock_find_in_range 2. replace reserve_early with memblock_x86_reserve_range 3. replace free_early with memblock_x86_free_range. 4. NO_BOOTMEM will switch to use memblock too. 5. use _e820, _early wrap in the patch, in following patch, will replace them all 6. because memblock_x86_free_range support partial free, we can remove some special care 7. Need to make sure that memblock_find_in_range() is called after memblock_x86_fill() so adjust some calling later in setup.c::setup_arch() -- corruption_check and mptable_update -v2: Move reserve_brk() early Before fill_memblock_area, to avoid overlap between brk and memblock_find_in_range() that could happen We have more then 128 RAM entry in E820 tables, and memblock_x86_fill() could use memblock_find_in_range() to find a new place for memblock.memory.region array. and We don't need to use extend_brk() after fill_memblock_area() So move reserve_brk() early before fill_memblock_area(). -v3: Move find_smp_config early To make sure memblock_find_in_range not find wrong place, if BIOS doesn't put mptable in right place. -v4: Treat RESERVED_KERN as RAM in memblock.memory. and they are already in memblock.reserved already.. use __NOT_KEEP_MEMBLOCK to make sure memblock related code could be freed later. -v5: Generic version __memblock_find_in_range() is going from high to low, and for 32bit active_region for 32bit does include high pages need to replace the limit with memblock.default_alloc_limit, aka get_max_mapped() -v6: Use current_limit instead -v7: check with MEMBLOCK_ERROR instead of -1ULL or -1L -v8: Set memblock_can_resize early to handle EFI with more RAM entries -v9: update after kmemleak changes in mainline Suggested-by: David S. Miller <davem@davemloft.net> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-06-16fix typos concerning "initiali[zs]e"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-29x86: Make sure free_init_pages() frees pages on page boundaryYinghai Lu
When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or in a more compact fashion. Example: Allocated new RAMDISK: 00ec2000 - 0248ce57 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56 The new RAMDISK's end is not page aligned. Last page could be shared with other users. When free_init_pages are called for initrd or .init, the page could be freed and we could corrupt other data. code segment in free_init_pages(): | for (; addr < end; addr += PAGE_SIZE) { | ClearPageReserved(virt_to_page(addr)); | init_page_count(virt_to_page(addr)); | memset((void *)(addr & ~(PAGE_SIZE-1)), | POISON_FREE_INITMEM, PAGE_SIZE); | free_page(addr); | totalram_pages++; | } last half page could be used as one whole free page. So page align the boundaries. -v2: make the original initramdisk to be aligned, according to Johannes, otherwise we have the chance to lose one page. we still need to keep initrd_end not aligned, otherwise it could confuse decompressor. -v3: change to WARN_ON instead, suggested by Johannes. -v4: use PAGE_ALIGN, suggested by Johannes. We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN Add comments about assuming ramdisk start is aligned in relocate_initrd(), change to re get ramdisk_image instead of save it to make diff smaller. Add warning for wrong range, suggested by Johannes. -v6: remove one WARN() We need to align beginning in free_init_pages() do not copy more than ramdisk_size, noticed by Johannes Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-12x86: Move bios page reserve early to head32/64.cYinghai Lu
So prepare to make one more clean of early_res.c. -v2: don't need to reserve first page in early_res because we already mark that in e820 as reserved already. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-20-git-send-email-yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-11x86: Use find_e820() instead of hard coded trampoline addressYinghai Lu
Jens found the following crash/regression: [ 0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80 [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page and [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE and bisected it to b24c2a9 ("x86: Move find_smp_config() earlier and avoid bootmem usage"). It turns out the BIOS is using the first 64k for mptable, without reserving it. So try to find good range for the real-mode trampoline instead of hard coding it, in case some bios tries to use that range for sth. Reported-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Tested-by: Jens Axboe <jens.axboe@oracle.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> LKML-Reference: <4B21630A.6000308@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31x86: Add Moorestown early detectionThomas Gleixner
Moorestown MID devices need to be detected early in the boot process to setup and do not call x86_default_early_setup as there is no EBDA region to reserve. [ Copied the minimal code from Jacobs latest MRST series ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jacob Pan <jacob.jun.pan@intel.com>
2009-08-31x86: Add early platform detectionThomas Gleixner
Platforms like Moorestown require early setup and want to avoid the call to reserve_ebda_region. The x86_init override is too late when the MRST detection happens in setup_arch. Move the default i386 x86_init overrides and the call to reserve_ebda_region into a separate function which is called as the default of a switch case depending on the hardware_subarch id in boot params. This allows us to add a case for MRST and let MRST have its own early setup function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Move ioapic_ids_setup to x86_init_opsThomas Gleixner
32bit and also the numaq code have special requirements on the ioapic_id setup. Convert it to a x86_init_ops function and get rid of the quirks and #ifdefs Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Add reserve_ebda_region to x86_init_opsThomas Gleixner
reserve_ebda_region needs to be called befor start_kernel. Moorestown needs to override it. Make it a x86_init_ops function and initialize it with the default reserve_ebda_region. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Add request_standard_resources to x86_initThomas Gleixner
The 32bit and the 64bit code are slighty different in the reservation of standard resources. Also the upcoming Moorestown support needs its own version of that. Add it to x86_init_ops and initialize it with the 64bit default. 32bit overrides it in early boot. Now moorestown can add it's own override w/o sprinkling the code with more #ifdefs Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Add probe_roms to x86_initThomas Gleixner
probe_roms is only used on 32bit. Add it to the x86_init ops and remove the #ifdefs. Default initializer is x86_init_noop() which is overridden in the 32bit boot code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-14x86-32: use brk segment for allocating initial kernel pagetableJeremy Fitzhardinge
Impact: use new interface instead of previous ad hoc implementation Rather than having special purpose init_pg_table_start/end variables to delimit the kernel pagetable built by head_32.S, just use the brk mechanism to extend the bss for the new pagetable. This patch removes init_pg_table_start/end and pg0, defines __brk_base (which is page-aligned and immediately follows _end), initializes the brk region to start there, and uses it for the 32-bit pagetable. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-14x86: add brk allocation for very, very early allocationsJeremy Fitzhardinge
Impact: new interface Add a brk()-like allocator which effectively extends the bss in order to allow very early code to do dynamic allocations. This is better than using statically allocated arrays for data in subsystems which may never get used. The space for brk allocations is in the bss ELF segment, so that the space is mapped properly by the code which maps the kernel, and so that bootloaders keep the space free rather than putting a ramdisk or something into it. The bss itself, delimited by __bss_stop, ends before the brk area (__brk_base to __brk_limit). The kernel text, data and bss is reserved up to __bss_stop. Any brk-allocated data is reserved separately just before the kernel pagetable is built, as that code allocates from unreserved spaces in the e820 map, potentially allocating from any unused brk memory. Ultimately any unused memory in the brk area is used in the general kernel memory pool. Initially the brk space is set to 1MB, which is probably much larger than any user needs (the largest current user is i386 head_32.S's code to build the pagetables to map the kernel, which can get fairly large with a big kernel image and no PSE support). So long as the system has sufficient memory for the bootloader to reserve the kernel+1MB brk, there are no bad effects resulting from an over-large brk. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-12-08x86: change static allocation of trampoline areaRafael J. Wysocki
Impact: fix trampoline sizing bug, save space While debugging a suspend-to-RAM related issue it occured to me that if the trampoline code had grown past 4 KB, we would have been allocating too little memory for it, since the 4 KB size of the trampoline is hardcoded into arch/x86/kernel/e820.c . Change that by making the kernel compute the trampoline size and allocate as much memory as necessary. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-05x86: extract common part of head32.c and head64.c into head.cHuang, Ying
This patch extracts the common part of head32.c and head64.c into head.c. Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: andi@firstfloor.org Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-31x86: extend e820 early_res support 32bit -fix #3Yinghai Lu
introduce init_pg_table_start, so xen PV could specify the value. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-25x86: extend e820 ealy_res support 32bitYinghai Lu
move early_res related from e820_64.c to e820.c make edba detection to be done in head32.c remove smp_alloc_memory, because we have fixed trampoline address now. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 10 files changed, 320 insertions(+), 319 deletions(-) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17x86: introduce kernel/head32.cEric W. Biederman
Copy x86_64 and add a head32.c so we can start moving early architecture initialization out of assembly. [ Sam Ravnborg <sam@ravnborg.org>: updated it to x86 ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>