summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/io_apic_32.c
AgeCommit message (Collapse)Author
2008-10-16rename io_apic_64.c and io_apic_32.c to io_apic.cYinghai Lu
The two files are now line by line equal. (sans a printk) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make io_apic_32.c the same as io_apic_64.cIngo Molnar
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make io_apic_64.c and io_apic_32.c the sameYinghai Lu
all the same except INTR_REMAPPING related and ioapic io resource. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make headers files the same in io_apic_xx.cYinghai Lu
also make no_timer_check to be global on 64 bit, because vmi_32 is using that. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: order variables in io_apic_xx.cYinghai Lu
move first_system_vector to apic_64.c. also add #ifdef CONFIG_INTR_REMAP to prepare 32 bit to use same file. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: ordering functions in io_apic_32.cYinghai Lu
prepare for unification: try to make functions be of the same order to io_apic_64.c. v2: add calling setup_msi_irq back to arch_setup_msi_irq Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86, io-apic: remove union about dest for log/phyYinghai Lu
let user decide the meaning of the bits. This unifies the 32-bit and 64-bit io-apic code a bit. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: add debug info for 32bit sparse_irqYinghai Lu
so could figure out bugs where we get an interrupt, but vector_irq is not initialized yet. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make 32bit support per_cpu vectorYinghai Lu
so we can merge io_apic_32.c and io_apic_64.c v2: Use cpu_online_map as target cpus for bigsmp, just like 64-bit is doing. Also remove some unused TARGET_CPUS macro. v3: need to check if desc is null in smp_irq_move_cleanup also migration needs to reset vector too, so copy __target_IO_APIC_irq from 64bit. (the duplication will go away once the two files are unified.) Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make 32 bit to use sparse_irqYinghai Lu
but actually irq still needs to be less than NR_IRQS, because interrupt[NR_IRQS] in entry.S. need to enable per_cpu vector... Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make 32bit to use irq_2_pin in irq_cfgYinghai Lu
so it is more like 64 bit. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: make 32bit use irq_cfg_alloc, etcYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: add irq_cfg for 32bitYinghai Lu
it only contains vector ... Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: remove irqbalance in kernel for 32 bitYinghai Lu
This has been deprecated for years, the user space irqbalanced utility works better with numa, has configurable policies, etc... Signed-off-by: Yinghai Lu <yhlu.kernel@gmai.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: move kstat_irqs from kstat to irq_descYinghai Lu
based on Eric's patch ... together mold it with dyn_array for irq_desc, will allcate kstat_irqs for nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already. v2: make sure system without generic_hardirqs works they don't have irq_desc v3: fix merging v4: [mingo@elte.hu] fix typo [ mingo@elte.hu ] irq: build fix fix: arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow': arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs' Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16generic: sparse irqs: use irq_desc() together with dyn_array, instead of ↵Yinghai Lu
irq_desc[] add CONFIG_HAVE_SPARSE_IRQ to for use condensed array. Get rid of irq_desc[] array assumptions. Preallocate 32 irq_desc, and irq_desc() will try to get more. ( No change in functionality is expected anywhere, except the odd build failure where we missed a code site or where a crossing commit itroduces new irq_desc[] usage. ) v2: according to Eric, change get_irq_desc() to irq_desc() Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use dyn_array in io_apic_xx.cYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-16x86: use nr_irqsYinghai Lu
also add first_free_entry and pin_map_size, which were NR_IRQS derived constants. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-14Merge branch 'x86/apic' into x86/coreIngo Molnar
2008-08-14Merge branches 'x86/prototypes', 'x86/x2apic' and 'x86/debug' into x86/coreIngo Molnar
2008-08-14Merge branch 'linus' into x86/coreIngo Molnar
Conflicts: arch/x86/kernel/genapic_64.c include/asm-x86/kvm_host.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11x86: Restore proper vector locking during cpu hotplugEric W. Biederman
Having cpu_online_map change during assign_irq_vector can result in some really nasty and weird things happening. The one that bit me last time was accessing non existent per cpu memory for non existent cpus. This locking was removed in a sloppy x86_64 and x86_32 merge patch. Guys can we please try and avoid subtly breaking x86 when we are merging files together? Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-07-31x86_32: use apic_ops at print_local_APIC()Hiroshi Shimamoto
Use apic_icr_read at print_local_APIC() in io_apic_32.c Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com>
2008-07-26x86: add setup_ioapic_ids for numaq in x86_quirksYinghai Lu
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24x86: PIC, L-APIC and I/O APIC debug informationMaciej W. Rozycki
Dump all the PIC, local APIC and I/O APIC information at the fs_initcall() level, which is after ACPI (if used) has initialised PCI information, making the point of invocation consistent across MP-table and ACPI platforms. Remove explicit calls to print_IO_APIC() from elsewhere. Make the interface of all the functions involved consistent between 32-bit and 64-bit versions and make them all static by default by the means of a New-and-Improved(TM) __apicdebuginit() macro. Note that like print_IO_APIC() all these only output anything if "apic=debug" has been passed to the kernel through the command line. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'x86/apic' into x86/x2apicIngo Molnar
Conflicts: arch/x86/kernel/paravirt.c arch/x86/kernel/smpboot.c arch/x86/kernel/vmi_32.c arch/x86/lguest/boot.c arch/x86/xen/enlighten.c include/asm-x86/apic.h include/asm-x86/paravirt.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18Merge branch 'linus' into x86/x2apicIngo Molnar
2008-07-18x86: I/O APIC: Always report how the timer has been set upMaciej W. Rozycki
Following recent (and less so) issues with the 8254 timer when routed through the I/O or local APIC, always report which configurations have been tried and which one has been set up eventually. This is so that logs posted by people for some other reason can be used as a cross-reference when investigating any possible future problems. The change unifies messages printed on 32-bit and 64-bit platforms and adds trailing newlines (removes leading ones), so that proper log level annotation can be used and any possible interspersed output will not cause a mess. I have chosen to use apic_printk(APIC_QUIET, ...) rather than printk(...) so that the distinction of these messages is maintained making possible future decisions about changes in this area easier. A change posted separately making apic_verbosity unsigned removes any extra code that would otherwise be generated as a result of this design decision. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18x86: APIC: remove apic_write_around(); use alternativesMaciej W. Rozycki
Use alternatives to select the workaround for the 11AP Pentium erratum for the affected steppings on the fly rather than build time. Remove the X86_GOOD_APIC configuration option and replace all the calls to apic_write_around() with plain apic_write(), protecting accesses to the ESR as appropriate due to the 3AP Pentium erratum. Remove apic_read_around() and all its invocations altogether as not needed. Remove apic_write_atomic() and all its implementing backends. The use of ASM_OUTPUT2() is not strictly needed for input constraints, but I have used it for readability's sake. I had the feeling no one else was brave enough to do it, so I went ahead and here it is. Verified by checking the generated assembly and tested with both a 32-bit and a 64-bit configuration, also with the 11AP "feature" forced on and verified with gdb on /proc/kcore to work as expected (as an 11AP machines are quite hard to get hands on these days). Some script complained about the use of "volatile", but apic_write() needs it for the same reason and is effectively a replacement for writel(), so I have disregarded it. I am not sure what the policy wrt defconfig files is, they are generated and there is risk of a conflict resulting from an unrelated change, so I have left changes to them out. The option will get removed from them at the next run. Some testing with machines other than mine will be needed to avoid some stupid mistake, but despite its volume, the change is not really that intrusive, so I am fairly confident that because it works for me, it will everywhere. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-15Merge branch 'generic-ipi' into generic-ipi-for-linusIngo Molnar
Conflicts: arch/powerpc/Kconfig arch/s390/kernel/time.c arch/x86/kernel/apic_32.c arch/x86/kernel/cpu/perfctr-watchdog.c arch/x86/kernel/i8259_64.c arch/x86/kernel/ldt.c arch/x86/kernel/nmi_64.c arch/x86/kernel/smpboot.c arch/x86/xen/smp.c include/asm-x86/hw_irq_32.h include/asm-x86/hw_irq_64.h include/asm-x86/mach-default/irq_vectors.h include/asm-x86/mach-voyager/irq_vectors.h include/asm-x86/smp.h kernel/Makefile Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-13x86: I/O APIC: remove an IRQ2-mask hackMaciej W. Rozycki
Now that IRQ2 is never made available to the I/O APIC, there is no need to special-case it and mask as a workaround for broken systems. Actually, because of the former, mask_IO_APIC_irq(2) is a no-op already. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-12x86: make read_apic_id return final apicidYinghai Lu
also remove GET_APIC_ID when read_apic_id is used. need to apply after [PATCH] x86: mach_apicdef.h need to include before smp.h Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: I/O APIC: Never configure IRQ2Maciej W. Rozycki
There is no such entity as ISA IRQ2. The ACPI spec does not make it explicitly clear, but does not preclude it either -- all it says is ISA legacy interrupts are identity mapped by default (subject to overrides), but it does not state whether IRQ2 exists or not. As a result if there is no IRQ0 override, then IRQ2 is normally initialised as an ISA interrupt, which implies an edge-triggered line, which is unmasked by default as this is what we do for edge-triggered I/O APIC interrupts so as not to miss an edge. To the best of my knowledge it is useless, as IRQ2 has not been in use since the PC/AT as back then it was taken by the 8259A cascade interrupt to the slave, with the line position in the slot rerouted to newly-created IRQ9. No device could thus make use of this line with the pair of 8259A chips. Now in theory INTIN2 of the I/O APIC may be usable, but the interrupt of the device wired to it would not be available in the PIC mode at all, so I seriously doubt if anybody decided to reuse it for a regular device. However there are two common uses of INTIN2. One is for IRQ0, with an ACPI interrupt override (or its equivalent in the MP table). But in this case IRQ2 is gone entirely with INTIN0 left vacant. The other one is for an 8959A ExtINTA cascade. In this case IRQ0 goes to INTIN0 and if ACPI is used INTIN2 is assumed to be IRQ2 (there is no override and ACPI has no way to report ExtINTA interrupts). This is where a problem happens. The problem is INTIN2 is configured as a native APIC interrupt, with a vector assigned and the mask cleared. And the line may indeed get active and inject interrupts if the master 8959A has its timer interrupt enabled (it might happen for other interrupts too, but they are normally masked in the process of rerouting them to the I/O APIC). There are two cases where it will happen: * When the I/O APIC NMI watchdog is enabled. This is actually a misnomer as the watchdog pulses are delivered through the 8259A to the LINT0 inputs of all the local APICs in the system. The implication is the output of the master 8259A goes high and low repeatedly, signalling interrupts to INTIN2 which is enabled too! [The origin of the name is I think for a brief period during the development we had a capability in our code to configure the watchdog to use an I/O APIC input; that would be INTIN2 in this scenario.] * When the native route of IRQ0 via INTIN0 fails for whatever reason -- as it happens with the system considered here. In this scenario the timer pulse is delivered through the 8259A to LINT0 input of the local APIC of the bootstrap processor, quite similarly to how is done for the watchdog described above. The result is, again, INTIN2 receives these pulses too. Rafael's system used to escape this scenario, because an incorrect IRQ0 override would occupy INTIN2 and prevent it from being unmasked. My conclusion is IRQ2 should be excluded from configuration in all the cases and the current exception for ACPI systems should be lifted. The reason being the exception not only being useless, but harmful as well. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: L-APIC: Always fully configure IRQ0Maciej W. Rozycki
Unlike the 32-bit one, the 64-bit variation of the LVT0 setup code for the "8259A Virtual Wire" through the local APIC timer configuration does not fully configure the relevant irq_chip structure. Instead it relies on the preceding I/O APIC code to have set it up, which does not happen if the I/O APIC variants have not been tried. The patch includes corresponding changes to the 32-bit variation too which make them both the same, barring a small syntactic difference involving sequence of functions in the source. That should work as an aid with the upcoming merge. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11x86: L-APIC: Set IRQ0 as edge-triggeredMaciej W. Rozycki
IRQ0 is edge-triggered, but the "8259A Virtual Wire" through the local APIC configuration in the 32-bit version uses the "fasteoi" handler suitable for level-triggered APIC interrupt. Rewrite code so that the "edge" handler is used. The 64-bit version uses different code and is unaffected. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-09x86: fix C1E && nx6325 stability problemRafael J. Wysocki
The problems are that, with the ACPI vs timer overring issue _fixed_, after using the box for some time (between several seconds and 1 hour, at random) processes get very high CPU loads (once I've got X using 107% of the CPU, for example) and the system becomes unresponsive, as though there were interrupts lost or something similar. Andreas Herrman reproduced similar problems: > Ok, now I've reproduced the stability problem. > - Using tip/master, > - reverting e38502eb8aa82314d5ab0eba45f50e6790dadd88 and > - applying your patch from this posting > http://marc.info/?l=linux-kernel&m=121539354224562&w=4 > > Starting X, firefox, gimp, tuxpaint and doing some drawing in tuxpaint > results in a slow system. Drawing is almost not possible anymore -- > Selections of new colors, cursors etc. is performed with huge delay > if it's performed at all. > > BTW, the code sets up timer IRQ as Virtual Wire IRQ: > > Jul 8 14:57:58 kodscha IO-APIC (apicid-pin) 2-22, 2-23 not connected. > Jul 8 14:57:58 kodscha ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > Jul 8 14:57:58 kodscha ...trying to set up timer as Virtual Wire IRQ... works. > > and both INT0 and INT2 of IOAPIC are masked: > > Jul 8 14:57:58 kodscha NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: > Jul 8 14:57:58 kodscha 00 000 1 0 0 0 0 0 0 00 > Jul 8 14:57:58 kodscha 01 003 0 0 0 0 0 1 1 31 > Jul 8 14:57:58 kodscha 02 003 1 0 0 0 0 0 0 30 > > I've also seen strange CPU utilization -- with syslog-ng: > > top - 15:33:06 up 35 min, 4 users, load average: 1.70, 0.68, 0.37 > Tasks: 64 total, 4 running, 60 sleeping, 0 stopped, 0 zombie > Cpu0 : 0.0%us,100.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st > Cpu1 : 6.4%us, 87.2%sy, 0.0%ni, 5.8%id, 0.0%wa, 0.6%hi, 0.0%si, 0.0%st > Mem: 895384k total, 283568k used, 611816k free, 35492k buffers > Swap: 1959920k total, 0k used, 1959920k free, 163044k cached > > PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND > 4632 root 20 0 17216 800 580 S 104 0.1 0:34.22 syslog-ng > 28505 root 20 0 205m 11m 4024 S 6 1.3 0:21.16 X > 28518 root 20 0 56292 5652 4492 S 1 0.6 0:01.80 fluxbox > 1 root 20 0 3724 608 508 S 0 0.1 0:00.36 init > > So far I have no clue why C1E-idle in conjunction with virtual wire > mode causes this strange behaviour. > > ... and I start to think about the root cause of all this. > > I've performed similar tests under X with the IRQ0/INT0 configuration and > I did not see above symptoms. So lets fall back to the IRQ0/INT0 configuration on this box. This basically restores the dont-use-the-lapic-timer exception mechanism that was unconditional on this box prior commit 8750bf5 ("x86: add C1E aware idle function"). Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: let setup_arch call init_apic_mappings for 32bitYinghai Lu
instead of calling it from trap_init() also move init ioapic mapping out of apic_32.c so 32 bit do same as 64 bit Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: change __setup_vector_irq with setup_vector_irqGlauber Costa
We create a version of it for i386, and then take the CONFIG_X86_64 ifdef out of the game. We could create a __setup_vector_irq for i386, but it would incur in an unnecessary lock taking. Moreover, it is better practice to only export setup_vector_irq anyway. Signed-off-by: Glauber Costa <gcosta@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'x86/mpparse' into x86/develIngo Molnar
Conflicts: arch/x86/Kconfig arch/x86/kernel/io_apic_32.c arch/x86/kernel/setup_64.c arch/x86/mm/init_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branch 'linus' into tmp.x86.mpparse.newIngo Molnar
2008-07-08Merge branch 'x86/irq' into x86/develIngo Molnar
Conflicts: arch/x86/kernel/i8259.c arch/x86/kernel/irqinit_64.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08Merge branches 'x86/numa-fixes', 'x86/apic', 'x86/apm', 'x86/bitops', ↵Ingo Molnar
'x86/build', 'x86/cleanups', 'x86/cpa', 'x86/cpu', 'x86/defconfig', 'x86/gart', 'x86/i8259', 'x86/intel', 'x86/irqstats', 'x86/kconfig', 'x86/ldt', 'x86/mce', 'x86/memtest', 'x86/pat', 'x86/ptemask', 'x86/resumetrace', 'x86/threadinfo', 'x86/timers', 'x86/vdso' and 'x86/xen' into x86/devel
2008-07-08x86, arch/x86/kernel/io_apic_32.c: use kzalloc instead of kmalloc/memsetChristophe Jaillet
1) replace kmalloc/memset with equivalent kzalloc. Signed-off-by: Christophe Jaillet <jaillet.christophe@wanadoo.fr> Cc: cj <jaillet.christophe@wanadoo.fr> Cc: petero2@telia.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: coding style fixes to arch/x86/kernel/io_apic_32.cPaolo Ciarrocchi
Before: total: 91 errors, 73 warnings, 2850 lines checked After: total: 1 errors, 47 warnings, 2848 lines checked Compile tested: paolo@paolo-desktop:/tmp$ size io* text data bss dec hex filename 13836 1756 11104 26696 6848 io_apic_32.o.after 13836 1756 11104 26696 6848 io_apic_32.o.before Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86, io-apic: use predefined names instead of numeric constantsCyrill Gorcunov
This patch replaces some hard-coded numbers with predefined names. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: IO-APIC - use NMI_NONE instead of numeric constantCyrill Gorcunov
Not sure but maybe it is better to use NMI_DISABLED, will take a look. But for now this patch is not change anything in logic so it will not hurt/broke the kernel. For most cases nmi_watchdog assignment is by one of NMI_* macro so I think there it make sense too. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: I/O APIC: timer through 8259A second-chanceMaciej W. Rozycki
Some systems incorrectly report the ExtINTA pin of the I/O APIC as the genuine target of the timer interrupt. Here is a change that copies timer pin information found to the other pin if one has been found only. This way both a direct and a through-8259A route is tested with the pin letting these problematic systems work well enough. If no timer pin information has been found for the I/O APIC, then local APIC variations are tried only, similarly to what is done without the change (except without the misleading messages). Obviously if we try the first-chance path without being told by the BIOS to do so, we should not complain either, so do not print the message in this case. The 64-bit variation should be updated with a call to replace_pin_at_irq() which can be done with the upcoming merge. Since add_pin_to_irq() is now always called in the first-chance path, the condition to require it in the second-chance path no longer happens. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: I/O APIC: keep the timer IRQ masked during set-upMaciej W. Rozycki
Keep the timer interrupt line masked when reconfiguring its interrupt redirection entry in the I/O APIC. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: I/O APIC: unmask the second-chance timer interruptMaciej W. Rozycki
Unmask the timer interrupt line set up in the through-8259A mode explicitly after setup_timer_IRQ0_pin() has set up the I/O APIC interrupt redirection entry to let the two operations be unbound from each other. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-08x86: I/O APIC: rename setup_ExtINT_IRQ0_pin()Maciej W. Rozycki
Rename setup_ExtINT_IRQ0_pin() to setup_timer_IRQ0_pin() to better reflect the upcoming role of a function setting up a (semi-)arbitrary I/O APIC pin appropriately for the 8254 timer. By "appropriate" the following settings are meant: edge-triggered, active-high, all the other settings per-architecture. Adjust comments to reflect code appropriately. No functional changes. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>