summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2011-07-22Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, vdso: Do not allocate memory for the vDSO clocksource: Change __ARCH_HAS_CLOCKSOURCE_DATA to a CONFIG option x86, vdso: Drop now wrong comment Document the vDSO and add a reference parser ia64: Replace clocksource.fsys_mmio with generic arch data x86-64: Move vread_tsc and vread_hpet into the vDSO clocksource: Replace vread with generic arch data x86-64: Add --no-undefined to vDSO build x86-64: Allow alternative patching in the vDSO x86: Make alternative instruction pointers relative x86-64: Improve vsyscall emulation CS and RIP handling x86-64: Emulate legacy vsyscalls x86-64: Fill unused parts of the vsyscall page with 0xcc x86-64: Remove vsyscall number 3 (venosys) x86-64: Map the HPET NX x86-64: Remove kernel.vsyscall64 sysctl x86-64: Give vvars their own page x86-64: Document some of entry_64.S x86-64: Fix alignment of jiffies variable
2011-07-22Merge branch 'x86-signal-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-signal-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Kill handle_signal()->set_fs() x86, do_signal: Simplify the TS_RESTORE_SIGMASK logic x86, signals: Convert the X86_32 code to use set_current_blocked() x86, signals: Convert the IA32_EMULATION code to use set_current_blocked()
2011-07-22Merge branch 'x86-mtrr-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mtrr: Use pci_dev->revision x86, mtrr: use stop_machine APIs for doing MTRR rendezvous stop_machine: implement stop_machine_from_inactive_cpu() stop_machine: reorganize stop_cpus() implementation x86, mtrr: lock stop machine during MTRR rendezvous sequence
2011-07-22Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, microcode, AMD: Fix section header size check x86, microcode, AMD: Correct buf references
2011-07-22Merge branch 'x86-mce-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: Use mce_sysdev_ prefix to group functions x86, mce: Use mce_chrdev_ prefix to group functions x86, mce: Cleanup mce_read() x86, mce: Cleanup mce_create()/remove_device() x86, mce: Check the result of ancient_init() x86, mce: Introduce mce_gather_info() x86, mce: Replace MCM_ with MCI_MISC_ x86, mce: Replace MCE_SELF_VECTOR by irq_work x86, mce, severity: Clean up trivial coding style problems x86, mce, severity: Cleanup severity table x86, mce, severity: Make formatting a bit more readable x86, mce, severity: Fix two severities table signatures
2011-07-22Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, intel, power: Correct the MSR_IA32_ENERGY_PERF_BIAS message x86, msr: Fix typo in ENERGY_PERF_BIAS_POWERSAVE x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIAS
2011-07-22Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, smpboot: Mark the names[] array in __inquire_remote_apic() as const x86: Convert vmalloc()+memset() to vzalloc()
2011-07-22Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix write lock scalability 64-bit issue x86: Unify rwsem assembly implementation x86: Unify rwlock assembly implementation x86, asm: Fix binutils 2.16 issue with __USER32_CS x86, asm: Cleanup thunk_64.S x86, asm: Flip RESTORE_ARGS arguments logic x86, asm: Flip SAVE_ARGS arguments logic x86, asm: Thin down SAVE/RESTORE_* asm macros
2011-07-22Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabled x86, ioapic: Print IRTE when IR is enabled x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSR x86, ioapic: Also print Dest field x86, ioapic: Format clean up for IOAPIC output x86: print APIC data a little later during boot
2011-07-22Merge branch 'timers-cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mips: Fix i8253 clockevent fallout i8253: Cleanup outb/inb magic arm: Footbridge: Use common i8253 clockevent mips: Use common i8253 clockevent x86: Use common i8253 clockevent i8253: Create common clockevent implementation i8253: Export i8253_lock unconditionally pcpskr: MIPS: Make config dependencies finer grained pcspkr: Cleanup Kconfig dependencies i8253: Move remaining content and delete asm/i8253.h i8253: Consolidate definitions of PIT_LATCH x86: i8253: Consolidate definitions of global_clock_event i8253: Alpha, PowerPC: Remove unused asm/8253pit.h alpha: i8253: Cleanup remaining users of i8253pit.h i8253: Remove I8253_LOCK config i8253: Make pcsp sound driver use the shared i8253_lock i8253: Make pcspkr input driver use the shared i8253_lock i8253: Consolidate all kernel definitions of i8253_lock i8253: Unify all kernel declarations of i8253_lock i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-22Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (123 commits) perf: Remove the nmi parameter from the oprofile_perf backend x86, perf: Make copy_from_user_nmi() a library function perf: Remove perf_event_attr::type check x86, perf: P4 PMU - Fix typos in comments and style cleanup perf tools: Make test use the preset debugfs path perf tools: Add automated tests for events parsing perf tools: De-opt the parse_events function perf script: Fix display of IP address for non-callchain path perf tools: Fix endian conversion reading event attr from file header perf tools: Add missing 'node' alias to the hw_cache[] array perf probe: Support adding probes on offline kernel modules perf probe: Add probed module in front of function perf probe: Introduce debuginfo to encapsulate dwarf information perf-probe: Move dwarf library routines to dwarf-aux.{c, h} perf probe: Remove redundant dwarf functions perf probe: Move strtailcmp to string.c perf probe: Rename DIE_FIND_CB_FOUND to DIE_FIND_CB_END tracing/kprobe: Update symbol reference when loading module tracing/kprobes: Support module init function probing kprobes: Return -ENOENT if probe point doesn't exist ...
2011-07-22Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: iommu/core: Fix build with INTR_REMAP=y && CONFIG_DMAR=n iommu/amd: Don't use MSI address range for DMA addresses iommu/amd: Move missing parts to drivers/iommu iommu: Move iommu Kconfig entries to submenu x86/ia64: intel-iommu: move to drivers/iommu/ x86: amd_iommu: move to drivers/iommu/ msm: iommu: move to drivers/iommu/ drivers: iommu: move to a dedicated folder x86/amd-iommu: Store device alias as dev_data pointer x86/amd-iommu: Search for existind dev_data before allocting a new one x86/amd-iommu: Allow dev_data->alias to be NULL x86/amd-iommu: Use only dev_data in low-level domain attach/detach functions x86/amd-iommu: Use only dev_data for dte and iotlb flushing routines x86/amd-iommu: Store ATS state in dev_data x86/amd-iommu: Store devid in dev_data x86/amd-iommu: Introduce global dev_data_list x86/amd-iommu: Remove redundant device_flush_dte() calls iommu-api: Add missing header file Fix up trivial conflicts (independent additions close to each other) in drivers/Makefile and include/linux/pci.h
2011-07-22Merge branch 'of-pci' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: pci/of: Consolidate pci_bus_to_OF_node() pci/of: Consolidate pci_device_to_OF_node() x86/devicetree: Use generic PCI <-> OF matching microblaze/pci: Move the remains of pci_32.c to pci-common.c microblaze/pci: Remove powermac originated cruft pci/of: Match PCI devices to OF nodes dynamically
2011-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1287 commits) icmp: Fix regression in nexthop resolution during replies. net: Fix ppc64 BPF JIT dependencies. acenic: include NET_SKB_PAD headroom to incoming skbs ixgbe: convert to ndo_fix_features ixgbe: only enable WoL for magic packet by default ixgbe: remove ifdef check for non-existent define ixgbe: Pass staterr instead of re-reading status and error bits from descriptor ixgbe: Move interrupt related values out of ring and into q_vector ixgbe: add structure for containing RX/TX rings to q_vector ixgbe: inline the ixgbe_maybe_stop_tx function ixgbe: Update ATR to use recorded TX queues instead of CPU for routing igb: Fix for DH89xxCC near end loopback test e1000: always call e1000_check_for_link() on e1000_ce4100 MACs. netxen: add fw version compatibility check be2net: request native mode each time the card is reset ipv4: Constrain UFO fragment sizes to multiples of 8 bytes virtio_net: Fix panic in virtnet_remove ipv6: make fragment identifications less predictable ipv6: unshare inetpeers can: make function can_get_bittiming static ...
2011-07-22lguest: use a special 1:1 linear pagetable mode until first switch.Rusty Russell
The Host used to create some page tables for the Guest to use at the top of Guest memory; it would then tell the Guest where this was. In particular, it created linear mappings for 0 and 0xC0000000 addresses because lguest used to switch to its real page tables quite late in boot. However, since d50d8fe19 Linux initialized boot page tables in head_32.S even before the "are we lguest?" boot jump. So, now we can simplify things: the Host pagetable code assumes 1:1 linear mapping until it first calls the LHCALL_NEW_PGTABLE hypercall, which we now do before we reach C code. This also means that the Host doesn't need to know anything about the Guest's PAGE_OFFSET. (Non-Linux guests might not even have such a thing). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-21x86: Make Dell Latitude E6420 use reboot=pciH. Peter Anvin
Yet another variant of the Dell Latitude series which requires reboot=pci. From the E5420 bug report by Daniel J Blueman: > The E6420 is affected also (same platform, different casing and > features), which provides an external confirmation of the issue; I can > submit a patch for that later or include it if you prefer: > http://linux.koolsolutions.com/2009/08/04/howto-fix-linux-hangfreeze-during-reboots-and-restarts/ Reported-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
2011-07-21x86: Make Dell Latitude E5420 use reboot=pciDaniel J Blueman
Rebooting on the Dell E5420 often hangs with the keyboard or ACPI methods, but is reliable via the PCI method. [ hpa: this was deferred because we believed for a long time that the recent reshuffling of the boot priorities in commit 660e34cebf0a11d54f2d5dd8838607452355f321 fixed this platform. Unfortunately that turned out to be incorrect. ] Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Link: http://lkml.kernel.org/r/1305248699-2347-1-git-send-email-daniel.blueman@gmail.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
2011-07-21x86, perf: Make copy_from_user_nmi() a library functionRobert Richter
copy_from_user_nmi() is used in oprofile and perf. Moving it to other library functions like copy_from_user(). As this is x86 code for 32 and 64 bits, create a new file usercopy.c for unified code. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110607172413.GJ20052@erda.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21x86, perf: P4 PMU - Fix typos in comments and style cleanupCyrill Gorcunov
This patch: - fixes typos in comments and clarifies the text - renames obscure p4_event_alias::original and ::alter members to ::original and ::alternative as appropriate - drops parenthesis from the return of p4_get_alias_event() No functional changes. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Link: http://lkml.kernel.org/r/20110721160625.GX7492@sun Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-21x86, smpboot: Mark the names[] array in __inquire_remote_apic() as constGreg Dietsche
This array is read-only. Make it explicit by marking as const. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Link: http://lkml.kernel.org/r/1309482653-23648-1-git-send-email-Gregory.Dietsche@cuw.edu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-15x86, intel, power: Correct the MSR_IA32_ENERGY_PERF_BIAS messageLen Brown
Fix the printk_once() so that it actually prints (didn't print before due to a stray comma.) [ hpa: changed to an incremental patch and adjusted the description accordingly. ] Signed-off-by: Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1107151732480.18606@x980 Cc: <table@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86: Kill handle_signal()->set_fs()Oleg Nesterov
handle_signal()->set_fs() has a nice comment which explains what set_fs() is, but it doesn't explain why it is needed and why it depends on CONFIG_X86_64. Afaics, the history of this confusion is: 1. I guess today nobody can explain why it was needed in arch/i386/kernel/signal.c, perhaps it was always wrong. This predates 2.4.0 kernel. 2. then it was copy-and-past'ed to the new x86_64 arch. 3. then it was removed from i386 (but not from x86_64) by b93b6ca3 "i386: remove unnecessary code". 4. then it was reintroduced under CONFIG_X86_64 when x86 unified i386 and x86_64, because the patch above didn't touch x86_64. Remove it. ->addr_limit should be correct. Even if it was possible that it is wrong, it is too late to fix it after setup_rt_frame(). Linus commented in: http://lkml.kernel.org/r/alpine.LFD.0.999.0707170902570.19166@woody.linux-foundation.org ... about the equivalent bit from i386: Heh. I think it's entirely historical. Please realize that the whole reason that function is called "set_fs()" is that it literally used to set the %fs segment register, not "->addr_limit". So I think the "set_fs(USER_DS)" is there _only_ to match the other regs->xds = __USER_DS; regs->xes = __USER_DS; regs->xss = __USER_DS; regs->xcs = __USER_CS; things, and never mattered. And now it matters even less, and has been copied to all other architectures where it is just totally insane. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20110710164424.GA20261@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86, do_signal: Simplify the TS_RESTORE_SIGMASK logicOleg Nesterov
1. do_signal() looks at TS_RESTORE_SIGMASK and calculates the mask which should be stored in the signal frame, then it passes "oldset" to the callees, down to setup_rt_frame(). This is ugly, setup_rt_frame() can do this itself and nobody else needs this sigset_t. Move this code into setup_rt_frame. 2. do_signal() also clears TS_RESTORE_SIGMASK if handle_signal() succeeds. We can move this to setup_rt_frame() as well, this avoids the unnecessary checks and makes the logic more clear. 3. use set_current_blocked() instead of sigprocmask(SIG_SETMASK), sigprocmask() should be avoided. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20110710182203.GA27979@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86, signals: Convert the X86_32 code to use set_current_blocked()Oleg Nesterov
sys_sigsuspend() and sys_sigreturn() change ->blocked directly. This is not correct, see the changelog in e6fa16ab "signal: sigprocmask() should do retarget_shared_pending()" Change them to use set_current_blocked(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20110710192727.GA31759@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86-64: Move vread_tsc and vread_hpet into the vDSOAndy Lutomirski
The vsyscall page now consists entirely of trap instructions. Cc: John Stultz <johnstul@us.ibm.com> Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/637648f303f2ef93af93bae25186e9a1bea093f5.1310639973.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14perf, x86: P4 PMU - Introduce event alias featureCyrill Gorcunov
Instead of hw_nmi_watchdog_set_attr() weak function and appropriate x86_pmu::hw_watchdog_set_attr() call we introduce even alias mechanism which allow us to drop this routines completely and isolate quirks of Netburst architecture inside P4 PMU code only. The main idea remains the same though -- to allow nmi-watchdog and perf top run simultaneously. Note the aliasing mechanism applies to generic PERF_COUNT_HW_CPU_CYCLES event only because arbitrary event (say passed as RAW initially) might have some additional bits set inside ESCR register changing the behaviour of event and we can't guarantee anymore that alias event will give the same result. P.S. Thanks a huge to Don and Steven for for testing and early review. Acked-by: Don Zickus <dzickus@redhat.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> CC: Ingo Molnar <mingo@elte.hu> CC: Peter Zijlstra <a.p.zijlstra@chello.nl> CC: Stephane Eranian <eranian@google.com> CC: Lin Ming <ming.m.lin@intel.com> CC: Arnaldo Carvalho de Melo <acme@redhat.com> CC: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/20110708201712.GS23657@sun Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-07-14x86, intel, power: Initialize MSR_IA32_ENERGY_PERF_BIASLen Brown
Since 2.6.36 (23016bf0d25), Linux prints the existence of "epb" in /proc/cpuinfo, Since 2.6.38 (d5532ee7b40), the x86_energy_perf_policy(8) utility has been available in-tree to update MSR_IA32_ENERGY_PERF_BIAS. However, the typical BIOS fails to initialize the MSR, presumably because this is handled by high-volume shrink-wrap operating systems... Linux distros, on the other hand, do not yet invoke x86_energy_perf_policy(8). As a result, WSM-EP, SNB, and later hardware from Intel will run in its default hardware power-on state (performance), which assumes that users care for performance at all costs and not for energy efficiency. While that is fine for performance benchmarks, the hardware's intended default operating point is "normal" mode... Initialize the MSR to the "normal" by default during kernel boot. x86_energy_perf_policy(8) is available to change the default after boot, should the user have a different preference. Signed-off-by: Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1107140051020.18606@x980 Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org>
2011-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-13clocksource: Replace vread with generic arch dataAndy Lutomirski
The vread field was bloating struct clocksource everywhere except x86_64, and I want to change the way this works on x86_64, so let's split it out into per-arch data. Cc: x86@kernel.org Cc: Clemens Ladisch <clemens@ladisch.de> Cc: linux-ia64@vger.kernel.org Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/3ae5ec76a168eaaae63f08a2a1060b91aa0b7759.1310563276.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13x86: Make alternative instruction pointers relativeAndy Lutomirski
This save a few bytes on x86-64 and means that future patches can apply alternatives to unrelocated code. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/ff64a6b9a1a3860ca4a7b8b6dc7b4754f9491cd7.1310563276.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13x86-64: Improve vsyscall emulation CS and RIP handlingAndy Lutomirski
Three fixes here: - Send SIGSEGV if called from compat code or with a funny CS. - Don't BUG on impossible addresses. - Add a missing local_irq_disable. This patch also removes an unused variable. Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/6fb2b13ab39b743d1e4f466eef13425854912f7f.1310563276.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12x86. reboot: Make Dell Latitude E6320 use reboot=pciMaxime Ripard
The Dell Latitude E6320 doesn't reboot unless reboot=pci is set. Force it thanks to DMI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1309269451-4966-1-git-send-email-maxime.ripard@free-electrons.com Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-07-12x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabledNaga Chumbalkar
When IR (interrupt remapping) is enabled print_IO_APIC() displays output according to legacy RTE (redirection table entry) definitons: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 01 02 00 0 0 0 0 0 0 0 02 03 00 1 0 0 0 0 0 0 03 04 00 1 0 0 0 0 0 0 04 05 00 1 0 0 0 0 0 0 05 06 00 1 0 0 0 0 0 0 06 ... The above output is as per Sec 3.2.4 of the IOAPIC datasheet: 82093AA I/O Advanced Programmable Interrupt Controller (IOAPIC): http://download.intel.com/design/chipsets/datashts/29056601.pdf Instead the output should display the fields as discussed in Sec 5.5.1 of the VT-d specification: (Intel Virtualization Technology for Directed I/O: http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf) After the fix: NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect: 00 0000 0 1 0 0 0 0 0 0 00 01 000F 1 0 0 0 0 0 0 0 01 02 0001 1 0 0 0 0 0 0 0 02 03 0002 1 1 0 0 0 0 0 0 03 04 0011 1 1 0 0 0 0 0 0 04 05 0004 1 1 0 0 0 0 0 0 05 06 0005 1 1 0 0 0 0 0 0 06 ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211658.2939.93123.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12x86, ioapic: Print IRTE when IR is enabledNaga Chumbalkar
When "apic=debug" is used as a boot parameter, Linux prints the IOAPIC routing entries in "dmesg". Below is output from IOAPIC whose apic_id is 8: # dmesg | grep "routing entry" IOAPIC[8]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Similarly, when IR (interrupt remapping) is enabled, and the IRTE (interrupt remapping table entry) is set up we should display it. After the fix: # dmesg | grep IRTE IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:31 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:33 Dest:00000000 SID:00F1 SQ:0 SVT:1) ... The IRTE is defined in Sec 9.5 of the Intel VT-d Specification. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211704.2939.71291.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-12x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSRNaga Chumbalkar
If there's no special reason to zero-out the "high" 32-bits of the IA32_APIC_BASE MSR, let's preserve it. The x2APIC Specification doesn't explicitly state any such requirement. (Sec 2.2 in: http://www.intel.com/Assets/PDF/manual/318148.pdf). Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712055831.2498.78521.sendpatchset@nchumbalkar.americas.cpqcorp.net Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-11x86, ioapic: Also print Dest fieldNaga Chumbalkar
The code in setup_ioapic_irq() determines the Destination Field, so why not also include it in the debug printk output that gets displayed when the boot parameter "apic=debug" is used. Before the change, "dmesg" will show: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) ... After the change, you will see: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184603.2734.91071.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-11x86, ioapic: Format clean up for IOAPIC outputNaga Chumbalkar
When IOAPIC data is displayed in "dmesg" with the help of the boot parameter "apic=debug" certain values are not formatted correctly wrt their size. In the "dmesg" snippet below, note that the output for "max redirection entries", and "IO APIC version" which are each defined to be just 8-bits long are displayed as 2 bytes in length. Similarly, "Dst" under the "IRQ redirection table" should only be 8-bits long. IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 ... ... Do some formatting clean up, so you will see output like below: IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 31 02 00 0 0 0 0 0 0 0 30 03 00 1 0 0 0 0 0 0 33 ... ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184557.2734.61830.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-08x86: print APIC data a little later during bootNaga Chumbalkar
To view IOAPIC data you could boot with "apic=debug". When booting in such a way then the kernel will dump the IO-APIC's registers, for example: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 0 0 0 0 0 0 0 33 04 000 0 0 0 0 0 0 0 34 05 000 0 0 0 0 0 0 0 35 06 000 0 0 0 0 0 0 0 36 07 000 0 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 0 0 0 0 0 0 0 3A 0b 000 0 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 0 0 0 0 0 0 0 3D 0e 000 0 0 0 0 0 0 0 3E 0f 000 0 0 0 0 0 0 0 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 Delaying the call to print_ICs() gives better results: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 04 000 1 0 0 0 0 0 0 34 05 000 1 0 0 0 0 0 0 35 06 000 1 0 0 0 0 0 0 36 07 000 1 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 1 0 0 0 0 0 0 3A 0b 000 1 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 1 0 0 0 0 0 0 3D 0e 000 1 0 0 0 0 0 0 3E 0f 000 1 0 0 0 0 0 0 3F 10 000 1 1 0 1 0 0 0 29 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 0 1 0 1 0 0 0 51 15 000 1 0 0 0 0 0 0 00 16 000 0 1 0 1 0 0 0 61 17 000 0 1 0 1 0 0 0 59 Notice that the entries beyond interrupt input signal 0x0f also get populated and arent just the hw-initialization default of all zeroes. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708083555.2598.42216.sendpatchset@nchumbalkar.americas.hpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-06x86, suspend: Restore MISC_ENABLE MSR in realmode wakeupKees Cook
Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the XD_DISABLE bit) when resuming from S3, which can interact poorly with ebba638ae723d8a8fc2f7abce5ec18b688b791d7. In 32bit PAE mode, this can lead to a fault when EFER is restored by the kernel wakeup routines, due to it setting the NX bit for a CPU that (thanks to the BIOS reset) now incorrectly thinks it lacks the NX feature. (64bit is not affected because it uses a common CPU bring-up that specifically handles the XD_DISABLE bit.) The need for MISC_ENABLE being restored so early is specific to the S3 resume path. Normally, MISC_ENABLE is saved in save_processor_state(), but this happens after the resume header is created, so just reproduce the logic here. (acpi_suspend_lowlevel() creates the header, calls do_suspend_lowlevel, which calls save_processor_state(), so the saved processor context isn't available during resume header creation.) [ hpa: Consider for stable if OK in mainline ] Signed-off-by: Kees Cook <kees.cook@canonical.com> Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.net Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@kernel.org> 2.6.38+
2011-07-05x86, reboot: Acer Aspire One A110 reboot quirkPeter Chubb
Since git commit 660e34cebf0a11d54f2d5dd8838607452355f321 x86: reorder reboot method preferences, my Acer Aspire One hangs on reboot. It appears that its ACPI method for rebooting is broken. The attached patch adds a quirk so that the machine will reboot via the BIOS. [ hpa: verified that the ACPI control on this machine is just plain broken. ] Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Link: http://lkml.kernel.org/r/w439iki5vl.wl%25peter@chubb.wattle.id.au Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-07-05Merge branch 'tip/perf/core-2' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
2011-07-03Merge branch 'perf/stacktrace' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
2011-07-02x86: Don't use frame pointer to save old stack on irq entryFrederic Weisbecker
rbp is used in SAVE_ARGS_IRQ to save the old stack pointer in order to restore it later in ret_from_intr. It is convenient because we save its value in the irq regs and it's easily restored using the leave instruction. However this is a kind of abuse of the frame pointer which role is to help unwinding the kernel by chaining frames together, each node following the return address to the previous frame. But although we are breaking the frame by changing the stack pointer, there is no preceding return address before the new frame. Hence using the frame pointer to link the two stacks breaks the stack unwinders that find a random value instead of a return address here. There is no workaround that can work in every case. We are using the fixup_bp_irq_link() function to dereference that abused frame pointer in the case of non nesting interrupt (which means stack changed). But that doesn't fix the case of interrupts that don't change the stack (but we still have the unconditional frame link), which is the case of hardirq interrupting softirq. We have no way to detect this transition so the frame irq link is considered as a real frame pointer and the return address is dereferenced but it is still a spurious one. There are two possible results of this: either the spurious return address, a random stack value, luckily belongs to the kernel text and then the unwinding can continue and we just have a weird entry in the stack trace. Or it doesn't belong to the kernel text and unwinding stops there. This is the reason why stacktraces (including perf callchains) on irqs that interrupted softirqs don't work very well. To solve this, we don't save the old stack pointer on rbp anymore but we save it to a scratch register that we push on the new stack and that we pop back later on irq return. This preserves the whole frame chain without spurious return addresses in the middle and drops the need for the horrid fixup_bp_irq_link() workaround. And finally irqs that interrupt softirq are sanely unwinded. Before: 99.81% perf [kernel.kallsyms] [k] perf_pending_event | --- perf_pending_event irq_work_run smp_irq_work_interrupt irq_work_interrupt | |--41.60%-- __read | | | |--99.90%-- create_worker | | bench_sched_messaging | | cmd_bench | | run_builtin | | main | | __libc_start_main | --0.10%-- [...] After: 1.64% swapper [kernel.kallsyms] [k] perf_pending_event | --- perf_pending_event irq_work_run smp_irq_work_interrupt irq_work_interrupt | |--95.00%-- arch_irq_work_raise | irq_work_queue | __perf_event_overflow | perf_swevent_overflow | perf_swevent_event | perf_tp_event | perf_trace_softirq | __do_softirq | call_softirq | do_softirq | irq_exit | | | |--73.68%-- smp_apic_timer_interrupt | | apic_timer_interrupt | | | | | |--96.43%-- amd_e400_idle | | | cpu_idle | | | start_secondary Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jan Beulich <JBeulich@novell.com>
2011-07-02x86: Remove useless unwinder backlink from irq regs savingFrederic Weisbecker
The unwinder backlink in interrupt entry is very useless. It's actually not part of the stack frame chain and thus is never used. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jan Beulich <JBeulich@novell.com>
2011-07-02x86,64: Separate arg1 from rbp handling in SAVE_REGS_IRQFrederic Weisbecker
Just for clarity in the code. Have a first block that handles the frame pointer and a separate one that handles pt_regs pointer and its use. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jan Beulich <JBeulich@novell.com>
2011-07-02x86,64: Simplify save_regs()Frederic Weisbecker
The save_regs function that saves the regs on low level irq entry is complicated because of the fact it changes its stack in the middle and also because it manipulates data allocated in the caller frame and accesses there are directly calculated from callee rsp value with the return address in the middle of the way. This complicates the static stack offsets calculation and require more dynamic ones. It also needs a save/restore of the function's return address. To simplify and optimize this, turn save_regs() into a macro. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jan Beulich <JBeulich@novell.com>
2011-07-02x86: Fetch stack from regs when possible in dump_trace()Frederic Weisbecker
When regs are passed to dump_stack(), we fetch the frame pointer from the regs but the stack pointer is taken from the current frame. Thus the frame and stack pointers may not come from the same context. For example this can result in the unwinder to think the context is in irq, due to the current value of the stack, but the frame pointer coming from the regs points to a frame from another place. It then tries to fix up the irq link but ends up dereferencing a random frame pointer that doesn't belong to the irq stack: [ 9131.706906] ------------[ cut here ]------------ [ 9131.707003] WARNING: at arch/x86/kernel/dumpstack_64.c:129 dump_trace+0x2aa/0x330() [ 9131.707003] Hardware name: AMD690VM-FMH [ 9131.707003] Perf: bad frame pointer = 0000000000000005 in callchain [ 9131.707003] Modules linked in: [ 9131.707003] Pid: 1050, comm: perf Not tainted 3.0.0-rc3+ #181 [ 9131.707003] Call Trace: [ 9131.707003] <IRQ> [<ffffffff8104bd4a>] warn_slowpath_common+0x7a/0xb0 [ 9131.707003] [<ffffffff8104be21>] warn_slowpath_fmt+0x41/0x50 [ 9131.707003] [<ffffffff8178b873>] ? bad_to_user+0x6d/0x10be [ 9131.707003] [<ffffffff8100c2da>] dump_trace+0x2aa/0x330 [ 9131.707003] [<ffffffff810107d3>] ? native_sched_clock+0x13/0x50 [ 9131.707003] [<ffffffff8101b164>] perf_callchain_kernel+0x54/0x70 [ 9131.707003] [<ffffffff810d391f>] perf_prepare_sample+0x19f/0x2a0 [ 9131.707003] [<ffffffff810d546c>] __perf_event_overflow+0x16c/0x290 [ 9131.707003] [<ffffffff810d5430>] ? __perf_event_overflow+0x130/0x290 [ 9131.707003] [<ffffffff810107d3>] ? native_sched_clock+0x13/0x50 [ 9131.707003] [<ffffffff8100fbb9>] ? sched_clock+0x9/0x10 [ 9131.707003] [<ffffffff810752e5>] ? T.375+0x15/0x90 [ 9131.707003] [<ffffffff81084da4>] ? trace_hardirqs_on_caller+0x64/0x180 [ 9131.707003] [<ffffffff810817bd>] ? trace_hardirqs_off+0xd/0x10 [ 9131.707003] [<ffffffff810d5764>] perf_event_overflow+0x14/0x20 [ 9131.707003] [<ffffffff810d588c>] perf_swevent_hrtimer+0x11c/0x130 [ 9131.707003] [<ffffffff817821a1>] ? error_exit+0x51/0xb0 [ 9131.707003] [<ffffffff81072e93>] __run_hrtimer+0x83/0x1e0 [ 9131.707003] [<ffffffff810d5770>] ? perf_event_overflow+0x20/0x20 [ 9131.707003] [<ffffffff81073256>] hrtimer_interrupt+0x106/0x250 [ 9131.707003] [<ffffffff812a3bfd>] ? trace_hardirqs_off_thunk+0x3a/0x3c [ 9131.707003] [<ffffffff81024833>] smp_apic_timer_interrupt+0x53/0x90 [ 9131.707003] [<ffffffff81789053>] apic_timer_interrupt+0x13/0x20 [ 9131.707003] <EOI> [<ffffffff817821a1>] ? error_exit+0x51/0xb0 [ 9131.707003] [<ffffffff8178219c>] ? error_exit+0x4c/0xb0 [ 9131.707003] ---[ end trace b2560d4876709347 ]--- Fix this by simply taking the stack pointer from regs->sp when regs are provided. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-07-02x86, mtrr: Use pci_dev->revisionSergei Shtylyov
This code uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it wasn't converted by commit 44c10138fd4 ("PCI: Change all drivers to use pci_device->revision") before being moved to arch/x86/... Do it now at last -- and save one level of indentation... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/201107012242.08347.sshtylyov@ru.mvista.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01x86, perf: Add constraints for architectural PMUAvi Kivity
The v1 PMU does not have any fixed counters. Using the v2 constraints, which do have fixed counters, causes an additional choice to be present in the weight calculation, but not when actually scheduling the event, leading to an event being not scheduled at all. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1309362157-6596-3-git-send-email-avi@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-01perf: Add context field to perf_eventAvi Kivity
The perf_event overflow handler does not receive any caller-derived argument, so many callers need to resort to looking up the perf_event in their local data structure. This is ugly and doesn't scale if a single callback services many perf_events. Fix by adding a context parameter to perf_event_create_kernel_counter() (and derived hardware breakpoints APIs) and storing it in the perf_event. The field can be accessed from the callback as event->overflow_handler_context. All callers are updated. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1309362157-6596-2-git-send-email-avi@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-03 19:18:52 +0000