summaryrefslogtreecommitdiffstats
path: root/arch/x86/kvm/emulate.c
AgeCommit message (Collapse)Author
2010-08-01KVM: Update Red Hat copyrightsAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: Add missing decoder flags for xor instructionsMohammed Gamal
This adds missing decoder flags for xor instructions (opcodes 0x34 - 0x35) Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86 emulator: Add missing decoder flags for sub instructionMohammed Gamal
This adds missing decoder flags for sub instructions (opcodes 0x2c - 0x2d) Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86 emulator: Add test acc, imm instruction (opcodes 0xA8 - 0xA9)Mohammed Gamal
This adds test acc, imm instruction to the x86 emulator Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86 emulator: do not inject exception directly into vcpuGleb Natapov
Return exception as a result of instruction emulation and handle injection in KVM code. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: move interruptibility state tracking out of emulatorGleb Natapov
Emulator shouldn't access vcpu directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: handle shadowed registers outside emulatorGleb Natapov
Emulator shouldn't access vcpu directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: use shadowed register in emulate_sysexit()Gleb Natapov
emulate_sysexit() should use shadowed registers copy instead of looking into vcpu state directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: set RFLAGS outside x86 emulator codeGleb Natapov
Removes the need for set_flags() callback. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: advance RIP outside x86 emulator codeGleb Natapov
Return new RIP as part of instruction emulation result instead of updating KVM's RIP from x86 emulator code. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: do not inject #PF in (read|write)_emulated() callbacksGleb Natapov
Return error to x86 emulator instead of injection exception behind its back. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: make (get|set)_dr() callback return error if it failsGleb Natapov
Make (get|set)_dr() callback return error if it fails instead of injecting exception behind emulator's back. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: make set_cr() callback return error if it failsGleb Natapov
Make set_cr() callback return error if it fails instead of injecting #GP behind emulator's back. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: cleanup some direct calls into kvm to use existing callbacksGleb Natapov
Use callbacks from x86_emulate_ops to access segments instead of calling into kvm directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: add get_cached_segment_base() callback to x86_emulate_opsGleb Natapov
On VMX it is expensive to call get_cached_descriptor() just to get segment base since multiple vmcs_reads are done instead of only one. Introduce new call back get_cached_segment_base() for efficiency. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: add (set|get)_msr callbacks to x86_emulate_opsGleb Natapov
Add (set|get)_msr callbacks to x86_emulate_ops instead of calling them directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: add (set|get)_dr callbacks to x86_emulate_opsGleb Natapov
Add (set|get)_dr callbacks to x86_emulate_ops instead of calling them directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: handle "far address" source operandGleb Natapov
ljmp/lcall instruction operand contains address and segment. It can be 10 bytes long. Currently we decode it as two different operands. Fix it by introducing new kind of operand that can hold entire far address. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: cleanup nop emulationGleb Natapov
Make it more explicit what we are checking for. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: cleanup xchg emulationGleb Natapov
Dst operand is already initialized during decoding stage. No need to reinitialize. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: fix Move r/m16 to segment register decodingGleb Natapov
This instruction does not need generic decoding for its dst operand. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: introduce read cacheGleb Natapov
Introduce read cache which is needed for instruction that require more then one exit to userspace. After returning from userspace the instruction will be re-executed with cached read value. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: fix emulator_task_switch() return value.Gleb Natapov
emulator_task_switch() should return -1 for failure and 0 for success to the caller, just like x86_emulate_insn() does. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86: Push potential exception error code on task switchesJan Kiszka
When a fault triggers a task switch, the error code, if existent, has to be pushed on the new task's stack. Implement the missing bits. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86: Terminate early if task_switch_16/32 failedJan Kiszka
Stop the switch immediately if task_switch_16/32 returned an error. Only if that step succeeded, the switch should actually take place and update any register states. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Don't overwrite decode cacheAvi Kivity
Currently if we an instruction spans a page boundary, when we fetch the second half we overwrite the first half. This prevents us from tracing the full instruction opcodes. Fix by appending the second half to the first. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix unlocked CMPXCHG8B emulationGleb Natapov
When CMPXCHG8B is executed without LOCK prefix it is racy. Preserve this behaviour in emulator too. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86 emulator: add decoding of CMPXCHG8B dst operandGleb Natapov
Decode CMPXCHG8B destination operand in decoding stage. Fixes regression introduced by "If LOCK prefix is used dest arg should be memory" commit. This commit relies on dst operand be decoded at the beginning of an instruction emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86 emulator: commit rflags as part of registers commitGleb Natapov
Make sure that rflags is committed only after successful instruction emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86 emulator: introduce pio in string read ahead.Gleb Natapov
To optimize "rep ins" instruction do IO in big chunks ahead of time instead of doing it only when required during instruction emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: restart string instruction without going back to a guest.Gleb Natapov
Currently when string instruction is only partially complete we go back to a guest mode, guest tries to reexecute instruction and exits again and at this point emulation continues. Avoid all of this by restarting instruction without going back to a guest mode, but return to a guest mode each 1024 iterations to allow interrupt injection. Pending exception causes immediate guest entry too. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: remove saved_eipGleb Natapov
c->eip is never written back in case of emulation failure, so no need to set it to old value. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Move string pio emulation into emulator.cGleb Natapov
Currently emulation is done outside of emulator so things like doing ins/outs to/from mmio are broken it also makes it hard (if not impossible) to implement single stepping in the future. The implementation in this patch is not efficient since it exits to userspace for each IO while previous implementation did 'ins' in batches. Further patch that implements pio in string read ahead address this problem. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix in/out emulation.Gleb Natapov
in/out emulation is broken now. The breakage is different depending on where IO device resides. If it is in userspace emulator reports emulation failure since it incorrectly interprets kvm_emulate_pio() return value. If IO device is in the kernel emulation of 'in' will do nothing since kvm_emulate_pio() stores result directly into vcpu registers, so emulator will overwrite result of emulation during commit of shadowed register. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: during rep emulation decrement ECX only if emulation ↵Gleb Natapov
succeeded Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: add decoding of X,Y parameters from Intel SDMGleb Natapov
Add decoding of X,Y parameters from Intel SDM which are used by string instruction to specify source and destination. Use this new decoding to implement movs, cmps, stos, lods in a generic way. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: populate OP_MEM operand during decoding.Gleb Natapov
All struct operand fields are initialized during decoding for all operand types except OP_MEM, but there is no reason for that. Move OP_MEM operand initialization into decoding stage for consistency. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Use task switch from emulator.cGleb Natapov
Remove old task switch code from x86.c Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Use load_segment_descriptor() instead of ↵Gleb Natapov
kvm_load_segment_descriptor() Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Emulate task switch in emulator.cGleb Natapov
Implement emulation of 16/32 bit task switch in emulator.c Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: cleanup grp3 return valueGleb Natapov
When x86_emulate_insn() does not know how to emulate instruction it exits via cannot_emulate label in all cases except when emulating grp3. Fix that. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: If LOCK prefix is used dest arg should be memory.Gleb Natapov
If LOCK prefix is used dest arg should be memory, otherwise instruction should generate #UD. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: do not call writeback if msr access fails.Gleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix return values of syscall/sysenter/sysexit emulationsGleb Natapov
Return X86EMUL_PROPAGATE_FAULT is fault was injected. Also inject #UD for those instruction when appropriate. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix mov dr to inject #UD when needed.Gleb Natapov
If CR4.DE=1 access to registers DR4/DR5 cause #UD. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: inject #UD on access to non-existing CRGleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: 0f (20|21|22|23) ignore mod bits.Gleb Natapov
Resent spec says that for 0f (20|21|22|23) the 2 bits in the mod field are ignored. Interestingly enough older spec says that 11 is only valid encoding. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix 0f 01 /5 emulationGleb Natapov
It is undefined and should generate #UD. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix mov r/m, sreg emulation.Gleb Natapov
mov r/m, sreg generates #UD ins sreg is incorrect. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Provide current eip as part of emulator context.Gleb Natapov
Eliminate the need to call back into KVM to get it from emulator. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-14 16:53:08 +0000