summaryrefslogtreecommitdiffstats
path: root/arch/x86/kvm/x86.c
AgeCommit message (Collapse)Author
2010-10-24KVM: x86: TSC reset compensationZachary Amsden
Attempt to synchronize TSCs which are reset to the same value. In the case of a reliable hardware TSC, we can just re-use the same offset, but on non-reliable hardware, we can get closer by adjusting the offset to match the elapsed time. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86: Move TSC offset writes to common codeZachary Amsden
Also, ensure that the storing of the offset and the reading of the TSC are never preempted by taking a spinlock. While the lock is overkill now, it is useful later in this patch series. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86: Drop vm_init_tscZachary Amsden
This is used only by the VMX code, and is not done properly; if the TSC is indeed backwards, it is out of sync, and will need proper handling in the logic at each and every CPU change. For now, drop this test during init as misguided. Signed-off-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: rename x86 kvm->arch.n_alloc_mmu_pagesDave Hansen
arch.n_alloc_mmu_pages is a poor choice of name. This value truly means, "the number of pages which _may_ be allocated". But, reading the name, "n_alloc_mmu_pages" implies "the number of allocated mmu pages", which is dead wrong. It's really the high watermark, so let's give it a name to match: nr_max_mmu_pages. This change will make the next few patches much more obvious and easy to read. Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: Separate emulation context initialization in a separate functionMohammed Gamal
The code for initializing the emulation context is duplicated at two locations (emulate_instruction() and kvm_task_switch()). Separate it in a separate function and call it from there. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: Allow accessing IDT via emulator opsMohammed Gamal
The patch adds a new member get_idt() to x86_emulate_ops. It also adds a function to get the idt in order to be used by the emulator. This is needed for real mode interrupt injection and the emulation of int instructions. Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: check io permissions only once for string pioGleb Natapov
Do not recheck io permission on every iteration. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-10-24KVM: x86 emulator: don't update vcpu state if instruction is restartedGleb Natapov
No need to update vcpu state since instruction is in the middle of the emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-10-24KVM: x86 emulator: store x86_emulate_ops in emulation contextAvi Kivity
It doesn't ever change, so we don't need to pass it around everywhere. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-09-08x86, cpu: Fix allowed CPUID bits for KVM guestsAndre Przywara
The AMD extensions to AVX (FMA4, XOP) work on the same YMM register set as AVX, so they are safe for guests to use, as long as AVX itself is allowed. Add F16C and AES on the way for the same reasons. Signed-off-by: Andre Przywara <andre.przywara@amd.com> LKML-Reference: <1283778860-26843-4-git-send-email-andre.przywara@amd.com> Acked-by: Avi Kivity <avi@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-09-08x86, cpu: Fix renamed, not-yet-shipping AMD CPUID feature bitAndre Przywara
The AMD SSE5 feature set as-it has been replaced by some extensions to the AVX instruction set. Thus the bit formerly advertised as SSE5 is re-used for one of these extensions (XOP). Although this changes the /proc/cpuinfo output, it is not user visible, as there are no CPUs (yet) having this feature. To avoid confusion this should be added to the stable series, too. Cc: stable@kernel.org [.32.x .34.x, .35.x] Signed-off-by: Andre Przywara <andre.przywara@amd.com> LKML-Reference: <1283778860-26843-2-git-send-email-andre.przywara@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-22Merge branch 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PIT: free irq source id in handling error path KVM: destroy workqueue on kvm_create_pit() failures KVM: fix poison overwritten caused by using wrong xstate size
2010-08-15KVM: fix poison overwritten caused by using wrong xstate sizeXiaotian Feng
fpu.state is allocated from task_xstate_cachep, the size of task_xstate_cachep is xstate_size. xstate_size is set from cpuid instruction, which is often smaller than sizeof(struct xsave_struct). kvm is using sizeof(struct xsave_struct) to fill in/out fpu.state.xsave, as what we allocated for fpu.state is xstate_size, kernel will write out of memory and caused poison/redzone/padding overwritten warnings. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Reviewed-by: Sheng Yang <sheng@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Avi Kivity <avi@redhat.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Sheng Yang <sheng@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-06Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: um, x86: Cast to (u64 *) inside set_64bit() x86-32, asm: Directly access per-cpu GDT x86-64, asm: Directly access per-cpu IST x86, asm: Merge cmpxchg_486_u64() and cmpxchg8b_emu() x86, asm: Move cmpxchg emulation code to arch/x86/lib x86, asm: Clean up and simplify <asm/cmpxchg.h> x86, asm: Clean up and simplify set_64bit() x86: Add memory modify constraints to xchg() and cmpxchg() x86-64: Simplify loading initial_gs x86: Use symbolic MSR names x86: Remove redundant K6 MSRs
2010-08-02KVM: x86 emulator: fix xchg instruction emulationWei Yongjun
If the destination is a memory operand and the memory cannot map to a valid page, the xchg instruction emulation and locked instruction will not work on io regions and stuck in endless loop. We should emulate exchange as write to fix it. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02KVM: x86: never re-execute instruction with enabled tdpGleb Natapov
With tdp enabled we should get into emulator only when emulating io, so reexecution will always bring us back into emulator. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02KVM: Expose MCE control MSRs to userspaceAvi Kivity
Userspace needs to reset and save/restore these MSRs. The MCE banks are not exposed since their number varies from vcpu to vcpu. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02KVM: PIT: stop vpit before freeing irq_routingXiao Guangrong
Fix: general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ...... Call Trace: [<ffffffffa0159bd1>] ? kvm_set_irq+0xdd/0x24b [kvm] [<ffffffff8106ea8b>] ? trace_hardirqs_off_caller+0x1f/0x10e [<ffffffff813ad17f>] ? sub_preempt_count+0xe/0xb6 [<ffffffff8106d273>] ? put_lock_stats+0xe/0x27 ... RIP [<ffffffffa0159c72>] kvm_set_irq+0x17e/0x24b [kvm] This bug is triggered when guest is shutdown, is because we freed irq_routing before pit thread stopped Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02KVM: Reenter guest after emulation failure if due to access to non-mmio addressGleb Natapov
When shadow pages are in use sometimes KVM try to emulate an instruction when it accesses a shadowed page. If emulation fails KVM un-shadows the page and reenter guest to allow vcpu to execute the instruction. If page is not in shadow page hash KVM assumes that this was attempt to do MMIO and reports emulation failure to userspace since there is no way to fix the situation. This logic has a race though. If two vcpus tries to write to the same shadowed page simultaneously both will enter emulator, but only one of them will find the page in shadow page hash since the one who founds it also removes it from there, so another cpu will report failure to userspace and will abort the guest. Fix this by checking (in addition to checking shadowed page hash) that page that caused the emulation belongs to valid memory slot. If it is then reenter the guest to allow vcpu to reexecute the instruction. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: VMX: Execute WBINVD to keep data consistency with assigned devicesSheng Yang
Some guest device driver may leverage the "Non-Snoop" I/O, and explicitly WBINVD or CLFLUSH to a RAM space. Since migration may occur before WBINVD or CLFLUSH, we need to maintain data consistency either by: 1: flushing cache (wbinvd) when the guest is scheduled out if there is no wbinvd exit, or 2: execute wbinvd on all dirty physical CPUs when guest wbinvd exits. Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: Simplify vcpu_enter_guest() mmu reload logic slightlyAvi Kivity
No need to reload the mmu in between two different vcpu->requests checks. kvm_mmu_reload() may trigger KVM_REQ_TRIPLE_FAULT, but that will be caught during atomic guest entry later. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86: Enable AVX for guestSheng Yang
Enable Intel(R) Advanced Vector Extension(AVX) for guest. The detection of AVX feature includes OSXSAVE bit testing. When OSXSAVE bit is not set, even if AVX is supported, the AVX instruction would result in UD as well. So we're safe to expose AVX bits to guest directly. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Prevent internal slots from being COWedAvi Kivity
If a process with a memory slot is COWed, the page will change its address (despite having an elevated reference count). This breaks internal memory slots which have their physical addresses loaded into vmcs registers (see the APIC access memory slot). Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Add mini-API for vcpu->requestsAvi Kivity
Makes it a little more readable and hackable. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Remove kernel-allocated memory regionsAvi Kivity
Equivalent (and better) functionality is provided by user-allocated memory regions. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Remove memory alias supportAvi Kivity
As advertised in feature-removal-schedule.txt. Equivalent support is provided by overlapping memory regions. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Consolidate load/save temporary buffer allocation and freeingAvi Kivity
Instead of three temporary variables and three free calls, have one temporary variable (with four names) and one free call. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Fix xsave and xcr save/restore memory leakAvi Kivity
We allocate temporary kernel buffers for these structures, but never free them. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: XSAVE/XRSTOR live migration supportSheng Yang
This patch enable save/restore of xsave state. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: Fix mov cr3 #GP at wrong instructionAvi Kivity
On Intel, we call skip_emulated_instruction() even if we injected a #GP, resulting in the #GP pointing at the wrong address. Fix by injecting the exception and skipping the instruction at the same place, so we can do just one or the other. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: Fix mov cr4 #GP at wrong instructionAvi Kivity
On Intel, we call skip_emulated_instruction() even if we injected a #GP, resulting in the #GP pointing at the wrong address. Fix by injecting the exception and skipping the instruction at the same place, so we can do just one or the other. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: Fix mov cr0 #GP at wrong instructionAvi Kivity
On Intel, we call skip_emulated_instruction() even if we injected a #GP, resulting in the #GP pointing at the wrong address. Fix by injecting the exception and skipping the instruction at the same place, so we can do just one or the other. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: VMX: Enable XSAVE/XRSTOR for guestDexuan Cui
This patch enable guest to use XSAVE/XRSTOR instructions. We assume that host_xcr0 would use all possible bits that OS supported. And we loaded xcr0 in the same way we handled fpu - do it as late as we can. Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: use linux/uaccess.h instead of asm/uaccess.hLai Jiangshan
Should use linux/uaccess.h instead of asm/uaccess.h Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86: Propagate fpu_alloc errorsJan Kiszka
Memory allocation may fail. Propagate such errors. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Update Red Hat copyrightsAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: Use FPU APISheng Yang
Convert KVM to use generic FPU API. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: Use unlazy_fpu() for host FPUSheng Yang
We can avoid unnecessary fpu load when userspace process didn't use FPU frequently. Derived from Avi's idea. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: Consolidate arch specific vcpu ioctl lockingAvi Kivity
Now that all arch specific ioctls have centralized locking, it is easy to move it to the central dispatcher. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: Lock arch specific vcpu ioctls centrallyAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: move vcpu locking to dispatcher for generic vcpu ioctlsAvi Kivity
All vcpu ioctls need to be locked, so instead of locking each one specifically we lock at the generic dispatcher. This patch only updates generic ioctls and leaves arch specific ioctls alone. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86: cleanup unused local variableXiao Guangrong
fix: arch/x86/kvm/x86.c: In function ‘handle_emulation_failure’: arch/x86/kvm/x86.c:3844: warning: unused variable ‘ctxt’ Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: VMX: Only reset MMU when necessarySheng Yang
Only modifying some bits of CR0/CR4 needs paging mode switch. Modify EFER.NXE bit would result in reserved bit updates. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: x86: Clean up duplicate assignmentSheng Yang
mmu.free() already set root_hpa to INVALID_PAGE, no need to do it again in the destory_kvm_mmu(). kvm_x86_ops->set_cr4() and set_efer() already assign cr4/efer to vcpu->arch.cr4/efer, no need to do it again later. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: inject #UD if instruction emulation fails and exit to userspaceGleb Natapov
Do not kill VM when instruction emulation fails. Inject #UD and report failure to userspace instead. Userspace may choose to reenter guest if vcpu is in userspace (cpl == 3) in which case guest OS will kill offending process and continue running. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01KVM: Get rid of KVM_REQ_KICKAvi Kivity
KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal operation. This causes the fast path check for a clear vcpu->requests to fail all the time, triggering tons of atomic operations. Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: do not inject exception directly into vcpuGleb Natapov
Return exception as a result of instruction emulation and handle injection in KVM code. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: move interruptibility state tracking out of emulatorGleb Natapov
Emulator shouldn't access vcpu directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: handle shadowed registers outside emulatorGleb Natapov
Emulator shouldn't access vcpu directly. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01KVM: x86 emulator: set RFLAGS outside x86 emulator codeGleb Natapov
Removes the need for set_flags() callback. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>