| Age | Commit message (Collapse) | Author |
|---|
|
Fix:
[ 3190.059226] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 3190.062224] IP: [<ffffffffa02aac66>] mmu_page_zap_pte+0x10/0xa7 [kvm]
[ 3190.063760] PGD 104f50067 PUD 112bea067 PMD 0
[ 3190.065309] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 3190.066860] CPU 1
[ ...... ]
[ 3190.109629] Call Trace:
[ 3190.111342] [<ffffffffa02aada6>] kvm_mmu_prepare_zap_page+0xa9/0x1fc [kvm]
[ 3190.113091] [<ffffffffa02ab2f5>] mmu_shrink+0x11f/0x1f3 [kvm]
[ 3190.114844] [<ffffffffa02ab25d>] ? mmu_shrink+0x87/0x1f3 [kvm]
[ 3190.116598] [<ffffffff81150c9d>] ? prune_super+0x142/0x154
[ 3190.118333] [<ffffffff8110a4f4>] ? shrink_slab+0x39/0x31e
[ 3190.120043] [<ffffffff8110a687>] shrink_slab+0x1cc/0x31e
[ 3190.121718] [<ffffffff8110ca1d>] do_try_to_free_pages
This is caused by shrinking page from the empty mmu, although we have
checked n_used_mmu_pages, it is useless since the check is out of mmu-lock
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
The huge page size is 4M on non-PAE host, but 2M page size is used in
transparent_hugepage_adjust(), so the page we get after adjust the
mapping level is not the head page, the BUG_ON() will be triggered
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Pull KVM changes from Avi Kivity:
"Changes include additional instruction emulation, page-crossing MMIO,
faster dirty logging, preventing the watchdog from killing a stopped
guest, module autoload, a new MSI ABI, and some minor optimizations
and fixes. Outside x86 we have a small s390 and a very large ppc
update.
Regarding the new (for kvm) rebaseless workflow, some of the patches
that were merged before we switch trees had to be rebased, while
others are true pulls. In either case the signoffs should be correct
now."
Fix up trivial conflicts in Documentation/feature-removal-schedule.txt
arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h.
I suspect the kvm_para.h resolution ends up doing the "do I have cpuid"
check effectively twice (it was done differently in two different
commits), but better safe than sorry ;)
* 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits)
KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block
KVM: s390: onereg for timer related registers
KVM: s390: epoch difference and TOD programmable field
KVM: s390: KVM_GET/SET_ONEREG for s390
KVM: s390: add capability indicating COW support
KVM: Fix mmu_reload() clash with nested vmx event injection
KVM: MMU: Don't use RCU for lockless shadow walking
KVM: VMX: Optimize %ds, %es reload
KVM: VMX: Fix %ds/%es clobber
KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte()
KVM: VMX: unlike vmcs on fail path
KVM: PPC: Emulator: clean up SPR reads and writes
KVM: PPC: Emulator: clean up instruction parsing
kvm/powerpc: Add new ioctl to retreive server MMU infos
kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM
KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler
KVM: PPC: Book3S: Enable IRQs during exit handling
KVM: PPC: Fix PR KVM on POWER7 bare metal
KVM: PPC: Fix stbux emulation
KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields
...
|
|
Currently the inject_pending_event() call during guest entry happens after
kvm_mmu_reload(). This is for historical reasons - we used to
inject_pending_event() in atomic context, while kvm_mmu_reload() needs task
context.
A problem is that nested vmx can cause the mmu context to be reset, if event
injection is intercepted and causes a #VMEXIT instead (the #VMEXIT resets
CR0/CR3/CR4). If this happens, we end up with invalid root_hpa, and since
kvm_mmu_reload() has already run, no one will fix it and we end up entering
the guest this way.
Fix by reordering event injection to be before kvm_mmu_reload(). Use
->cancel_injection() to undo if kvm_mmu_reload() fails.
https://bugzilla.kernel.org/show_bug.cgi?id=42980
Reported-by: Luke-Jr <luke-jr+linuxbugs@utopios.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Using RCU for lockless shadow walking can increase the amount of memory
in use by the system, since RCU grace periods are unpredictable. We also
have an unconditional write to a shared variable (reader_counter), which
isn't good for scaling.
Replace that with a scheme similar to x86's get_user_pages_fast(): disable
interrupts during lockless shadow walk to force the freer
(kvm_mmu_commit_zap_page()) to wait for the TLB flush IPI to find the
processor with interrupts enabled.
We also add a new vcpu->mode, READING_SHADOW_PAGE_TABLES, to prevent
kvm_flush_remote_tlbs() from avoiding the IPI.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
On x86_64, we can defer %ds and %es reload to the heavyweight context switch,
since nothing in the lightweight paths uses the host %ds or %es (they are
ignored by the processor). Furthermore we can avoid the load if the segments
are null, by letting the hardware load the null segments for us. This is the
expected case.
On i386, we could avoid the reload entirely, since the entry.S paths take care
of reload, except for the SYSEXIT path which leaves %ds and %es set to __USER_DS.
So we set them to the same values as well.
Saves about 70 cycles out of 1600 (around 4%; noisy measurements).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
The vmx exit code unconditionally restores %ds and %es to __USER_DS. This
can override the user's values, since %ds and %es are not saved and restored
in x86_64 syscalls. In practice, this isn't dangerous since nobody uses
segment registers in long mode, least of all programs that use KVM.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
The instruction emulation for bsrw is broken in KVM because
the code always uses bsr with 32 or 64 bit operand size for
emulation. Fix that by using emulate_2op_SrcV_nobyte() macro
to use guest operand size for emulation.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
fix:
[ 1529.577273] Call Trace:
[ 1529.577289] [<ffffffffa060d58f>] kvm_arch_hardware_disable+0x13/0x30 [kvm]
[ 1529.577302] [<ffffffffa05fa2d4>] hardware_disable_nolock+0x35/0x39 [kvm]
[ 1529.577311] [<ffffffffa05fa29f>] ? cpumask_clear_cpu.constprop.31+0x13/0x13 [kvm]
[ 1529.577315] [<ffffffff81096ba8>] on_each_cpu+0x44/0x84
[ 1529.577326] [<ffffffffa05f98b5>] hardware_disable_all_nolock+0x34/0x36 [kvm]
[ 1529.577335] [<ffffffffa05f98e2>] hardware_disable_all+0x2b/0x39 [kvm]
[ 1529.577349] [<ffffffffa05fafe5>] kvm_put_kvm+0xed/0x10f [kvm]
[ 1529.577358] [<ffffffffa05fb3d7>] kvm_vm_release+0x22/0x28 [kvm]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Although ModRM byte is fetched for group decoding, it is soon pushed
back to make decode_modrm() fetch it later again.
Now that ModRM flag can be found in the top level opcode tables, fetch
ModRM byte before group decoding to make the code simpler.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Needed for the following patch which simplifies ModRM fetching code.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
cpuid eax should return the max leaf so that
guests can find out the valid range.
This matches Xen et al.
Update documentation to match.
Tested with -cpu host.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
If vcpu executes hlt instruction while async PF is waiting to be delivered
vcpu can block and deliver async PF only after another even wakes it
up. This happens because kvm_check_async_pf_completion() will remove
completion event from vcpu->async_pf.done before entering kvm_vcpu_block()
and this will make kvm_arch_vcpu_runnable() return false. The solution
is to make vcpu runnable when processing completion.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We can't run PIT IRQ injection work in the interrupt context of the host
timer. This would allow the user to influence the handler complexity by
asking for a broadcast to a large number of VCPUs. Therefore, this work
was pushed into workqueue context in 9d244caf2e. However, this prevents
prioritizing the PIT injection over other task as workqueues share
kernel threads.
This replaces the workqueue with a kthread worker and gives that thread
a name in the format "kvm-pit/<owner-process-pid>". That allows to
identify and adjust the kthread priority according to the VM process
parameters.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
'bool' wants 8-bit registers.
Reported-by: Takuya Yoshikawa <takuya.yoshikawa@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The patch introduces a bitmap that will hold reasons apic should be
checked during vmexit. This is in a preparation for vp eoi patch
that will add one more check on vmexit. With the bitmap we can do
if(apic_attention) to check everything simultaneously which will
add zero overhead on the fast path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Currently, MSI messages can only be injected to in-kernel irqchips by
defining a corresponding IRQ route for each message. This is not only
unhandy if the MSI messages are generated "on the fly" by user space,
IRQ routes are a limited resource that user space has to manage
carefully.
By providing a direct injection path, we can both avoid using up limited
resources and simplify the necessary steps for user land.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
it's always current->mm
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This continues the theme started with vm_brk() and vm_munmap():
vm_mmap() does the same thing as do_mmap(), but additionally does the
required VM locking.
This uninlines (and rewrites it to be clearer) do_mmap(), which sadly
duplicates it in mm/mmap.c and mm/nommu.c. But that way we don't have
to export our internal do_mmap_pgoff() function.
Some day we hopefully don't have to export do_mmap() either, if all
modular users can become the simpler vm_mmap() instead. We're actually
very close to that already, with the notable exception of the (broken)
use in i810, and a couple of stragglers in binfmt_elf.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Like the vm_brk() function, this is the same as "do_munmap()", except it
does the VM locking for the caller.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
MMIO that are split across a page boundary are currently broken - the
code does not expect to be aborted by the exit to userspace for the
first MMIO fragment.
This patch fixes the problem by generalizing the current code for handling
16-byte MMIOs to handle a number of "fragments", and changes the MMIO
code to create those fragments.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Merge reason: development work has dependency on kvm patches merged
upstream.
Conflicts:
Documentation/feature-removal-schedule.txt
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
kvm_set_shared_msr() may not be called in preemptible context,
but vmx_set_msr() does so:
BUG: using smp_processor_id() in preemptible [00000000] code: qemu-kvm/22713
caller is kvm_set_shared_msr+0x32/0xa0 [kvm]
Pid: 22713, comm: qemu-kvm Not tainted 3.4.0-rc3+ #39
Call Trace:
[<ffffffff8131fa82>] debug_smp_processor_id+0xe2/0x100
[<ffffffffa0328ae2>] kvm_set_shared_msr+0x32/0xa0 [kvm]
[<ffffffffa03a103b>] vmx_set_msr+0x28b/0x2d0 [kvm_intel]
...
Making kvm_set_shared_msr() work in preemptible is cleaner, but
it's used in the fast path. Making two variants is overkill, so
this patch just disables preemption around the call.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Its much cleaner to use PT_PAGE_TABLE_LEVEL than its numeric value.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Intel spec says that TMR needs to be set/cleared
when IRR is set, but kvm also clears it on EOI.
I did some tests on a real (AMD based) system,
and I see same TMR values both before
and after EOI, so I think it's a minor bug in kvm.
This patch fixes TMR to be set/cleared on IRR set
only as per spec.
And now that we don't clear TMR, we can save
an atomic read of TMR on EOI that's not propagated
to ioapic, by checking whether ioapic needs
a specific vector first and calculating
the mode afterwards.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Needed by some framebuffer drivers. See
https://bugzilla.kernel.org/show_bug.cgi?id=42779
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
General support for the MMX instruction set. Special care is taken
to trap pending x87 exceptions so that they are properly reflected
to the guest.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Used to write to framebuffers (by at least Icaros).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
An Ubuntu 9.10 Karmic Koala guest is unable to boot or install due to
missing movdqa emulation:
kvm_exit: reason EXCEPTION_NMI rip 0x7fef3e025a7b info 7fef3e799000 80000b0e
kvm_page_fault: address 7fef3e799000 error_code f
kvm_emulate_insn: 0:7fef3e025a7b: 66 0f 7f 07 (prot64)
movdqa %xmm0,(%rdi)
[avi: mark it explicitly aligned]
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
x86 defines three classes of vector instructions: explicitly
aligned (#GP(0) if unaligned, explicitly unaligned, and default
(which depends on the encoding: AVX is unaligned, SSE is aligned).
Add support for marking an instruction as explicitly aligned or
unaligned, and mark MOVDQU as unaligned.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
Enable x86 feature-based autoloading for the kvm-amd module on CPUs
with X86_FEATURE_SVM.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
On reset all MPU counters should be enabled in GLOBAL_CTRL MSR.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Iteration using rmap_next(), the actual body is pte_list_next(), is
inefficient: every time we call it we start from checking whether rmap
holds a single spte or points to a descriptor which links more sptes.
In the case of shadow paging, this quadratic total iteration cost is a
problem. Even for two dimensional paging, with EPT/NPT on, in which we
almost always have a single mapping, the extra checks at the end of the
iteration should be eliminated.
This patch fixes this by introducing rmap_iterator which keeps the
iteration context for the next search. Furthermore the implementation
of rmap_next() is splitted into two functions, rmap_get_first() and
rmap_get_next(), to avoid repeatedly checking whether the rmap being
iterated on has only one spte.
Although there seemed to be only a slight change for EPT/NPT, the actual
improvement was significant: we observed that GET_DIRTY_LOG for 1GB
dirty memory became 15% faster than before. This is probably because
the new code is easy to make branch predictions.
Note: we just remove pte_list_next() because we can think of parent_ptes
as a reverse mapping.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We have PTE_LIST_EXT + 1 pointers in this structure and these 40/20
bytes do not fit cache lines well. Furthermore, some allocators may
use 64/32-byte objects for the pte_list_desc cache.
This patch solves this problem by changing PTE_LIST_EXT from 4 to 3.
For shadow paging, the new size is still large enough to hold both the
kernel and process mappings for usual anonymous pages. For file
mappings, there may be a slight change in the cache usage.
Note: with EPT/NPT we almost always have a single spte in each reverse
mapping and we will not see any change by this.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Since most guests will have paging enabled for memory management, add likely() optimization
around CR0.PG checks.
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Enable x86 feature-based autoloading for the kvm-intel module on CPUs
with X86_FEATURE_VMX.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Acked-By: Kay Sievers <kay@vrfy.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We have seen some problems of the current implementation of
get_dirty_log() which uses synchronize_srcu_expedited() for updating
dirty bitmaps; e.g. it is noticeable that this sometimes gives us ms
order of latency when we use VGA displays.
Furthermore the recent discussion on the following thread
"srcu: Implement call_srcu()"
http://lkml.org/lkml/2012/1/31/211
also motivated us to implement get_dirty_log() without SRCU.
This patch achieves this goal without sacrificing the performance of
both VGA and live migration: in practice the new code is much faster
than the old one unless we have too many dirty pages.
Implementation:
The key part of the implementation is the use of xchg() operation for
clearing dirty bits atomically. Since this allows us to update only
BITS_PER_LONG pages at once, we need to iterate over the dirty bitmap
until every dirty bit is cleared again for the next call.
Although some people may worry about the problem of using the atomic
memory instruction many times to the concurrently accessible bitmap,
it is usually accessed with mmu_lock held and we rarely see concurrent
accesses: so what we need to care about is the pure xchg() overheads.
Another point to note is that we do not use for_each_set_bit() to check
which ones in each BITS_PER_LONG pages are actually dirty. Instead we
simply use __ffs() in a loop. This is much faster than repeatedly call
find_next_bit().
Performance:
The dirty-log-perf unit test showed nice improvements, some times faster
than before, except for some extreme cases; for such cases the speed of
getting dirty page information is much faster than we process it in the
userspace.
For real workloads, both VGA and live migration, we have observed pure
improvements: when the guest was reading a file during live migration,
we originally saw a few ms of latency, but with the new method the
latency was less than 200us.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Dropped such mappings when we enabled dirty logging and we will never
create new ones until we stop the logging.
For this we introduce a new function which can be used to write protect
a range of PT level pages: although we do not need to care about a range
of pages at this point, the following patch will need this feature to
optimize the write protection of many pages.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
We will use this in the following patch to implement another function
which needs to write protect pages using the rmap information.
Note that there is a small change in debug printing for large pages:
we do not differentiate them from others to avoid duplicating code.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Now that we have a flag that will tell the guest it was suspended, create an
interface for that communication using a KVM ioctl.
Signed-off-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The kvm_vcpu_kick function performs roughly the same funcitonality on
most all architectures, so we shouldn't have separate copies.
PowerPC keeps a pointer to interchanging waitqueues on the vcpu_arch
structure and to accomodate this special need a
__KVM_HAVE_ARCH_VCPU_GET_WQ define and accompanying function
kvm_arch_vcpu_wq have been defined. For all other architectures this
is a generic inline that just returns &vcpu->wq;
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Also count the exits of fast-path.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Intel recently release 2 new features, HLE and RTM.
Refer to http://software.intel.com/file/41417.
This patch expose them to guest.
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
vmx_set_cr0 is called from vcpu run context, therefore it expects
kvm->srcu to be held (for setting up the real-mode TSS).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Pull kvm updates from Avi Kivity:
"Changes include timekeeping improvements, support for assigning host
PCI devices that share interrupt lines, s390 user-controlled guests, a
large ppc update, and random fixes."
This is with the sign-off's fixed, hopefully next merge window we won't
have rebased commits.
* 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (130 commits)
KVM: Convert intx_mask_lock to spin lock
KVM: x86: fix kvm_write_tsc() TSC matching thinko
x86: kvmclock: abstract save/restore sched_clock_state
KVM: nVMX: Fix erroneous exception bitmap check
KVM: Ignore the writes to MSR_K7_HWCR(3)
KVM: MMU: make use of ->root_level in reset_rsvds_bits_mask
KVM: PMU: add proper support for fixed counter 2
KVM: PMU: Fix raw event check
KVM: PMU: warn when pin control is set in eventsel msr
KVM: VMX: Fix delayed load of shared MSRs
KVM: use correct tlbs dirty type in cmpxchg
KVM: Allow host IRQ sharing for assigned PCI 2.3 devices
KVM: Ensure all vcpus are consistent with in-kernel irqchip settings
KVM: x86 emulator: Allow PM/VM86 switch during task switch
KVM: SVM: Fix CPL updates
KVM: x86 emulator: VM86 segments must have DPL 3
KVM: x86 emulator: Fix task switch privilege checks
arch/powerpc/kvm/book3s_hv.c: included linux/sched.h twice
KVM: x86 emulator: correctly mask pmc index bits in RDPMC instruction emulation
KVM: mmu_notifier: Flush TLBs before releasing mmu_lock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/fpu changes from Ingo Molnar.
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
i387: Split up <asm/i387.h> into exported and internal interfaces
i387: Uninline the generic FP helpers that we expose to kernel modules
|
|
Pull kmap_atomic cleanup from Cong Wang.
It's been in -next for a long time, and it gets rid of the (no longer
used) second argument to k[un]map_atomic().
Fix up a few trivial conflicts in various drivers, and do an "evil
merge" to catch some new uses that have come in since Cong's tree.
* 'kmap_atomic' of git://github.com/congwang/linux: (59 commits)
feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal
highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
drbd: remove the second argument of k[un]map_atomic()
zcache: remove the second argument of k[un]map_atomic()
gma500: remove the second argument of k[un]map_atomic()
dm: remove the second argument of k[un]map_atomic()
tomoyo: remove the second argument of k[un]map_atomic()
sunrpc: remove the second argument of k[un]map_atomic()
rds: remove the second argument of k[un]map_atomic()
net: remove the second argument of k[un]map_atomic()
mm: remove the second argument of k[un]map_atomic()
lib: remove the second argument of k[un]map_atomic()
power: remove the second argument of k[un]map_atomic()
kdb: remove the second argument of k[un]map_atomic()
udf: remove the second argument of k[un]map_atomic()
ubifs: remove the second argument of k[un]map_atomic()
squashfs: remove the second argument of k[un]map_atomic()
reiserfs: remove the second argument of k[un]map_atomic()
ocfs2: remove the second argument of k[un]map_atomic()
ntfs: remove the second argument of k[un]map_atomic()
...
|
|
Acked-by: Avi Kivity <avi@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <amwang@redhat.com>
|
|
kvm_write_tsc() converts from guest TSC to microseconds, not nanoseconds
as intended. The result is that the window for matching is 1000 seconds,
not 1 second.
Microsecond precision is enough for checking whether the TSC write delta
is within the heuristic values, so use it instead of nanoseconds.
Noted by Avi Kivity.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
