summaryrefslogtreecommitdiffstats
path: root/arch/x86/platform
AgeCommit message (Collapse)Author
2011-04-12x86/mrst: Fix boot crash caused by incorrect pin to irq mappingJacob Pan
Moorestown systems crash on boot because the secondary CPU clockevent (apbt1) will fail to request irq#1, which does not have ioapic chip in its irq_desc[] entry. Background: Moorestown platform does not have ISA bus nor legacy IRQs. It reuses the range of legacy IRQs for regular device interrupts. The routing information of early system device IRQs (timers) are obtained from firmware provided SFI tables. We reuse/fake MP configuration table to facilitate IRQ setup with IOAPIC. Maintaining a 1:1 mapping of IOAPIC pin (RTE entry) and IRQ# makes routing information clean and easy to understand on Moorestown. Though optional. This patch allows SFI timer and vRTC IRQ to be treated as ISA IRQ so that pin2irq mapping will be 1:1. Also fixed MP table type and use macros to clearly set MP IRQ entries. As a result, apbt timer and RTC interrupts on Moorestown are within legacy IRQ range: # cat /proc/interrupts CPU0 CPU1 0: 11249 0 IO-APIC-edge apbt0 1: 0 12271 IO-APIC-edge apbt1 8: 887 0 IO-APIC-fasteoi dw_spi 13: 0 0 IO-APIC-fasteoi INTEL_MID_DMAC2 14: 0 0 IO-APIC-fasteoi rtc0 Further discussion of this patch can be found at: https://lkml.org/lkml/2010/6/10/70 Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Link: http://lkml.kernel.org/r/1302286980-21139-1-git-send-email-jacob.jun.pan@linux.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11x86/ce4100: Add reg property to bridgesSebastian Andrzej Siewior
without the reg property Ben's new code won't find the PCI & ISA bridge and the devices won't get the DT-node attached. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: monstr@monstr.eu Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Link: http://lkml.kernel.org/r/20110407121315.GA9204@linutronix.de Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-07Merge branches 'x86-fixes-for-linus', 'sched-fixes-for-linus', ↵Linus Torvalds
'timers-fixes-for-linus', 'irq-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, fpu: Fix FPU exception handling on non-SSE systems x86, hibernate: Initialize mmu_cr4_features during boot x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change x86: visws: Fixup irq overhaul fallout * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Clean up rebalance_domains() load-balance interval calculation * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/mrst/vrtc: Fix boot crash in mrst_rtc_init() rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm() * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Fix cpumask leak in __setup_irq() * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf probe: Fix listing incorrect line number with inline function perf probe: Fix to find recursively inlined function perf probe: Fix multiple --vars options behavior perf probe: Fix to remove redundant close perf probe: Fix to ensure function declared file
2011-04-07x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()Feng Tang
The sfi_mrtc_array[] only gets initialized when the sfi mrtc table is parsed, so the vrtc_paddr should be initalized after it too. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1302140389-27603-1-git-send-email-feng.tang@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-04x86: visws: Fixup irq overhaul falloutThomas Gleixner
Reported-by: Ian Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29x86: Stop including <linux/delay.h> in two asm header filesJean Delvare
Stop including <linux/delay.h> in x86 header files which don't need it. This will let the compiler complain when this header is not included by source files when it should, so that contributors can fix the problem before building on other architectures starts to fail. Credits go to Geert for the idea. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20110325152014.297890ec@endymion.delvare> [ this also fixes an upstream build bug in drivers/media/rc/ite-cir.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-27mfd: OLPC: Clean up names to match what OLPC actually usesDaniel Drake
The cs5535-pms cell doesn't actually need to be cloned, so we can drop that and simply have the olpc-xo1.c driver use "cs5535-pms" directly. Also, rename the cs5535-acpi clones to what we actually use for the (currently out-of-tree) SCI driver. In the process, that fixes a subtle bug in olpc-xo1.c which broke powerdown on XO-1s.. olpc-xo1-ac-acpi was a typo, not something that actually existed. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-27mfd: Add mfd_clone_cell(), convert cs5535-mfd/olpc-xo1 to itAndres Salomon
Replace mfd_shared_platform_driver_register with mfd_clone_cell. The former was called by an mfd client, and registered both a platform driver and device. The latter is called by an mfd driver, and registers only a platform device. The downside of this is that mfd drivers need to be modified whenever new clients are added that share a cell; the upside is that it fits Linux's driver model better. It's also simpler. This also converts cs5535-mfd/olpc-xo1 from the old API. cs5535-mfd now creates the olpc-xo1-{acpi,pms} devices, while olpc-xo1 binds to them via platform drivers. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Rename mfd_shared_cell_{en,dis}able to drop the "shared" partAndres Salomon
As requested by Samuel, there's not really any reason to have "shared" in the name. This also modifies the only user of the function, as well. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add sharing for cs5535 acpi/pms cellsAndres Salomon
This enables sharing of cs5535-mfd cells via the new mfd_shared_* API. Hooks for enable/disble of resources are added, with refcounting of resources being automatically handled so that cs5535_mfd_res_enable/disable are only called when necessary. Clients of cs5535-mfd (in this case, olpc-xo1.c) are also modified to use the mfd_shared API. The platform drivers are also renamed to olpc-xo1-{pms,acpi}, and resource enabling/disabling is replaced with mfd_shared API calls. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-15Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) x86: Clean up apic.c and apic.h x86: Remove superflous goal definition of tsc_sync x86: dt: Correct local apic documentation in device tree bindings x86: dt: Cleanup local apic setup x86: dt: Fix OLPC=y/INTEL_CE=n build rtc: cmos: Add OF bindings x86: ce4100: Use OF to setup devices x86: ioapic: Add OF bindings for IO_APIC x86: dtb: Add generic bus probe x86: dtb: Add support for PCI devices backed by dtb nodes x86: dtb: Add device tree support for HPET x86: dtb: Add early parsing of IO_APIC x86: dtb: Add irq domain abstraction x86: dtb: Add a device tree for CE4100 x86: Add device tree support x86: e820: Remove conditional early mapping in parse_e820_ext x86: OLPC: Make OLPC=n build again x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection x86: OLPC: Cleanup config maze completely x86: OLPC: Hide OLPC_OPENFIRMWARE config switch ... Fix up conflicts in arch/x86/platform/ce4100/ce4100.c
2011-03-15Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (116 commits) x86: Enable forced interrupt threading support x86: Mark low level interrupts IRQF_NO_THREAD x86: Use generic show_interrupts x86: ioapic: Avoid redundant lookup of irq_cfg x86: ioapic: Use new move_irq functions x86: Use the proper accessors in fixup_irqs() x86: ioapic: Use irq_data->state x86: ioapic: Simplify irq chip and handler setup x86: Cleanup the genirq name space genirq: Add chip flag to force mask on suspend genirq: Add desc->irq_data accessor genirq: Add comments to Kconfig switches genirq: Fixup fasteoi handler for oneshot mode genirq: Provide forced interrupt threading sched: Switch wait_task_inactive to schedule_hrtimeout() genirq: Add IRQF_NO_THREAD genirq: Allow shared oneshot interrupts genirq: Prepare the handling of shared oneshot interrupts genirq: Make warning in handle_percpu_event useful x86: ioapic: Move trigger defines to io_apic.h ... Fix up trivial(?) conflicts in arch/x86/pci/xen.c due to genirq name space changes clashing with the Xen cleanups. The set_irq_msi() had moved to xen_bind_pirq_msi_to_irq().
2011-03-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: ce4100: Set pci ops via callback instead of module init x86/mm: Fix pgd_lock deadlock x86/mm: Handle mm_fault_error() in kernel space x86: Don't check for BIOS corruption in first 64K when there's no need to
2011-03-14x86: ce4100: Set pci ops via callback instead of module initSebastian Andrzej Siewior
Setting the pci ops on subsys initcall unconditionally will break multi platform kernels on anything except ce4100. Use x86_init.pci.init ops to call this only on real ce4100 platforms. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: sodaville@linutronix.de LKML-Reference: <20110314093340.GA21026@www.tglx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-12x86: Mark low level interrupts IRQF_NO_THREADThomas Gleixner
These cannot be threaded. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-12x86: Cleanup the genirq name spaceThomas Gleixner
genirq is switching to a consistent name space for the irq related functions. Convert x86. Conversion was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-10Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV: Initialize the broadcast assist unit base destination node id properly x86, numa: Fix numa_emulation code with memory-less node0 x86, build: Make sure mkpiggy fails on read error
2011-03-09x86, UV: Initialize the broadcast assist unit base destination node id properlyCliff Wickman
The BAU's initialization of the broadcast description header is lacking the coherence domain (high bits) in the nasid. This causes a catastrophic system failure when running on a system with multiple coherence domains. Signed-off-by: Cliff Wickman <cpw@sgi.com> LKML-Reference: <E1PxKBB-0005F0-3U@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-02x86: OLPC: have prom_early_alloc BUG rather than return NULLAndres Salomon
..similar to what sparc's prom_early_alloc does. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-25x86: dt: Cleanup local apic setupThomas Gleixner
Up to now we force enable the local apic in the devicetree setup uncoditionally and set smp_found_config unconditionally to 1 when a devicetree blob is available. This breaks, when local apic is disabled in the Kconfig. Make it consistent by initializing device tree explicitely before smp_get_config() so a non lapic configuration could be used as well. To be functional that would require to implement PIT as an interrupt host, but the only user of this code until now is ce4100 which requires apics to be available. So we leave this up to those who need it. Tested-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23x86: ce4100: Use OF to setup devicesSebastian Andrzej Siewior
Use device tree information to setup IO_APIC configuration, interrupt routing, HPET and everything else which cannot be enumerated by other means. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-11-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23x86: dtb: Add a device tree for CE4100Sebastian Andrzej Siewior
History: v1..v2: - dropped device_type except for cpu & pci. I have the compatible string for pci so I can drop the device_type once it is possible - I lowercased all compatible types. I will need to resend some patches which have upper case intel - The cpu had the same compatible string as the soc node. So I added to the soc node -immr for internel memory mapped registers. - I added generic names for all parts. - I reworked the i2c bars matching the way you suggested. I added a compatible node for the PCI device which only the PCI ids in its compatible string. The bars (each represents a complete i2c controller) have a "intel,ce4100-i2c-controller" compatible node. It is not used by the driver. The driver is probed via PCI ids (by the pci subsystem not OF) and matches the bar address against the ressource in the child node. Once there is a hit the node is attached. - The SPI driver is also probed via pci. However I also attached a compatible property based on PCI ids v2..v3: - intel,ce4100-immr become intel,ce4100-cp. cp stands for core peripherals. The Atom data sheet talks here about ACPI devices. Since we don't have ACPI this does not apply here. - The interrupt map is gone. There are now plenty of device nodes. - The "unit address string" got fixed, it uses not DD,V format. v3..v4: - added descriptions for compatible nodes introduced here: - intel,ce4100-ioapic - intel,ce4100-lapic - intel,ce4100-hpet - intel,ce4100 - intel,ce4100-cp - intel,ce4100-pci - added a description about I2C controller magic. - Added gpio-controller and gpio-cells property to gpio devices. Those properties are not (yet) used. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: sodaville@linutronix.de Cc: devicetree-discuss@lists.ozlabs.org LKML-Reference: <1298405266-1624-4-git-send-email-bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-23x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirectionThomas Gleixner
OLPC_OPENFIRMWARE_DT is just there to be selected by OLPC and selects OF_PROMTREE. So let OLPC select OF_PROMTREE and remove that extra config indirection. Fixup code and Makefile and use CONFIG_OF_PROMTREE instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andres Salomon <dilinger@queued.net>
2011-02-23x86: OLPC: Cleanup config maze completelyThomas Gleixner
Neither CONFIG_OLPC_OPENFIRMWARE nor CONFIG_OLPC_OPENFIRMWARE_DT are really necessary. OLPC selects OLPC_OPENFIRMWARE unconditionally, so move the "select OF" part under OLPC config option and fixup the dependencies in Makefiles and code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andres Salomon <dilinger@queued.net>
2011-02-22Merge branch 'devicetree/for-x86' of git://git.secretlab.ca/git/linux-2.6 ↵Thomas Gleixner
into x86/platform Reason: x86 devicetree support for ce4100 depends on those device tree changes scheduled for .39. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-14mrst/vrtc: Avoid using cmos rtc opsFeng Tang
If we don't assign Moorestown specific wallclock init and ops function the rtc/persisent clock code will use cmos rtc for access, this will crash Moorestown in that the ioports are not present. Also in vrtc driver, should avoid using cmos access to check UIP status. [feng.tang@intel.com: use set_fixmap_offset_nocache() to simplify code] Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-14x86: OLPC: convert olpc-xo1 driver from pci device to platform deviceAndres Salomon
The cs5535-mfd driver now takes care of the PCI BAR handling; this means the olpc-xo1 driver shouldn't be touching the PCI device at all. This patch uses both cs5535-acpi and cs5535-pms platform devices rather than a single platform device because the cs5535-mfd driver may be used by other CS5535 platform-specific drivers; OLPC doesn't get to dictate that ACPI and PMS will always be used together. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-13Merge branch 'x86-olpc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, olpc: Speed up device tree creation during boot x86, olpc: Add OLPC device-tree support x86, of: Define irq functions to allow drivers/of/* to build on x86
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-07Merge branch 'linus' into x86/apic-cleanupsIngo Molnar
Conflicts: arch/x86/include/asm/io_apic.h Merge reason: Resolve the conflict, update to a more recent -rc base Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-06Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV, BAU: Extend for more than 16 cpus per socket x86, UV: Fix the effect of extra bits in the hub nodeid register x86, UV: Add common uv_early_read_mmr() function for reading MMRs
2011-01-06Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, earlyprintk: Move mrst early console to platform/ and fix a typo x86, apbt: Setup affinity for apb timers acting as per-cpu timer ce4100: Add errata fixes for UART on CE4100 x86: platform: Move iris to x86/platform where it belongs x86, mrst: Check platform_device_register() return code x86/platform: Add Eurobraille/Iris power off support x86, mrst: Add explanation for using 1960 as the year offset for vrtc x86, mrst: Fix dependencies of "select INTEL_SCU_IPC" x86, mrst: The shutdown for MRST requires the SCU IPC mechanism x86: Ce4100: Add reboot_fixup() for CE4100 ce4100: Add PCI register emulation for CE4100 x86: Add CE4100 platform support x86: mrst: Set vRTC's IRQ to level trigger type x86: mrst: Add audio driver bindings rtc: Add drivers/rtc/rtc-mrst.c x86: mrst: Add vrtc driver which serves as a wall clock device x86: mrst: Add Moorestown specific reboot/shutdown support x86: mrst: Parse SFI timer table for all timer configs x86/mrst: Add SFI platform device parsing code
2011-01-05x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusionYinghai Lu
Found one x2apic pre-enabled system, x2apic_mode suddenly get corrupted after register some cpus, when compiled CONFIG_NR_CPUS=255 instead of 512. It turns out that generic_processor_info() ==> phyid_set(apicid, phys_cpu_present_map) causes the problem. phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled system some cpus have an apic id > 255. The variable after phys_cpu_present_map may get corrupted silently: ffffffff828e8420 B phys_cpu_present_map ffffffff828e8440 B apic_verbosity ffffffff828e8444 B local_apic_timer_c2_ok ffffffff828e8448 B disable_apic ffffffff828e844c B x2apic_mode ffffffff828e8450 B x2apic_disabled ffffffff828e8454 B num_processors ... Actually phys_cpu_present_map is referenced via apic id, instead index. We should use MAX_LOCAL_APIC instead MAX_APICS. For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes on 64-bit: text data bss dec filename 21696943 4193748 12787712 38678403 vmlinux.before 21696943 4193748 12791808 38682499 vmlinux.after No change on 32bit. Finally we can remove MAX_APCIS that was rather confusing. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> LKML-Reference: <4D23BD9C.3070102@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-03x86, UV, BAU: Extend for more than 16 cpus per socketCliff Wickman
Fix a hard-coded limit of a maximum of 16 cpu's per socket. The UV Broadcast Assist Unit code initializes by scanning the cpu topology of the system and assigning a master cpu for each socket and UV hub. That scan had an assumption of a limit of 16 cpus per socket. With Westmere we are going over that limit. The UV hub hardware will allow up to 32. If the scan finds the system has gone over that limit it returns an error and we print a warning and fall back to doing TLB shootdowns without the BAU. Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: <stable@kernel.org> # .37.x LKML-Reference: <E1PZol7-0000mM-77@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-15x86, olpc: Speed up device tree creation during bootAndres Salomon
Calling alloc_bootmem() for tiny chunks of memory over and over is really slow; on an XO-1, it caused the time between when the kernel started booting and when the display came alive (post-lxfb probe) to increase to 44s. This patch optimizes the prom_early_alloc function by calling alloc_bootmem for 4k-sized blocks of memory, and handing out chunks of that to callers. With this patch, the time between kernel load and display initialization decreased to 23s. If there's a better way to do this early in the boot process, please let me know. (Note: increasing the chunk size to 16k didn't noticably affect boot time, and wasted 9k.) v4: clarify comment, requested by hpa v3: fix wasted memory buglet found by Milton Miller, and style fix. v2: reorder prom_early_alloc as suggested by Grant. Signed-off-by: Andres Salomon <dilinger@queued.net> LKML-Reference: <20101129153951.74202a84@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-15x86, olpc: Add OLPC device-tree supportAndres Salomon
Make use of PROC_DEVICETREE to export the tree, and sparc's PROMTREE code to call into OLPC's Open Firmware to build the tree. v5: fix buglet with root node check (introduced in v4) v4: address some minor style issues pointed out by Grant, and explicitly cast negative phandle checks to s32. v3: rename olpc_prom to olpc_dt - rework Kconfig entries - drop devtree build hook from proc, instead adding a call to x86's paging_init (similarly to how sparc64 does it) - switch allocation from using slab to alloc_bootmem. this allows the DT to be built earlier during boot (during setup_arch); the downside is that there are some 1200 bootmem reservations that are done during boot. Not ideal.. - add a helper olpc_ofw_is_installed function to test for the existence and successful detection of OLPC's OFW. Signed-off-by: Andres Salomon <dilinger@queued.net> LKML-Reference: <20101116220952.26526a80@queued.net> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-09x86: Unify 3 similar ways of saving mp_irqs infoFeng Tang
There are 3 places defining similar functions of saving IRQ vector info into mp_irqs[] array: mmparse/acpi/mrst. Replace the redundant code by a common function in io_apic.c as it's only called when CONFIG_X86_IO_APIC=y Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20101207133204.4d913c5a@feng-i7> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09x86, sfi: Use register_lapic_address()Yinghai Lu
register_lapic_address() and mp_sfi_register_lapic_address() are almost identical. Use the common function. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Len Brown <lenb@kernel.org> LKML-Reference: <4CFDF693.6000908@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-09Merge branch 'x86/platform' into x86/apic-cleanupsThomas Gleixner
Reason: apic cleanup series depends on x86/apic, x86/amd-nb and x86/platform Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06x86, earlyprintk: Move mrst early console to platform/ and fix a typoFeng Tang
Move the code to arch/x86/platform/mrst/. Also fix a typo to use the correct config option: ONFIG_EARLY_PRINTK_MRST Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: alan@linux.intel.com LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-12-06ce4100: Add errata fixes for UART on CE4100Dirk Brandewie
This patch enables the UART on the CE4100. The UART has a couple of issues that need to be worked around. First the UART is mostly PC compatible except that it is clocked eight times faster than a standard PC so the default configuration provided in arch/x86/include/asm/serial.h needs to be overridden. Second the TX interrupt may not be set correctly all the time. Lastly accessing the UART via I/O space for early_prink() hangs the chip when the IOAPIC is enabled. A custom mem_serial_in() is provided to work around the TX interrupt issue. The configuration issues are dealt with in the call back registered with the 8250 driver via serial8250_set_isa_configurator() Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> LKML-Reference: <1290436128-17958-1-git-send-email-dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-20x86: platform: Move iris to x86/platform where it belongsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-18x86, mrst: Check platform_device_register() return codeVasiliy Kulikov
platform_device_register() may fail, if so propagate the return code from mrst_device_create(). Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> LKML-Reference: <1290104207-31279-1-git-send-email-segoon@openwall.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-11-18x86: UV: Address interrupt/IO port operation conflictDimitri Sivanich
This patch for SGI UV systems addresses a problem whereby interrupt transactions being looped back from a local IOH, through the hub to a local CPU can (erroneously) conflict with IO port operations and other transactions. To workaound this we set a high bit in the APIC IDs used for interrupts. This bit appears to be ignored by the sockets, but it avoids the conflict in the hub. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20101116222352.GA8155@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> ___ arch/x86/include/asm/uv/uv_hub.h | 4 ++++ arch/x86/include/asm/uv/uv_mmrs.h | 19 ++++++++++++++++++- arch/x86/kernel/apic/x2apic_uv_x.c | 25 +++++++++++++++++++++++-- arch/x86/platform/uv/tlb_uv.c | 2 +- arch/x86/platform/uv/uv_time.c | 4 +++- 5 files changed, 49 insertions(+), 5 deletions(-)
2010-11-12x86: Add CE4100 platform supportThomas Gleixner
Add CE4100 platform support. CE4100 needs early setup like moorestown. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11x86: mrst: Set vRTC's IRQ to level trigger typeFeng Tang
When setting up the mpc_intsrc structure for vRTC's IRQ, we need to set its irqflag to level trigger, otherwise it will be taken as edge triggered and the vRTC IRQ will fire only once, as there is never a EOI issued from the IA core for it. The original code worked in previous kernel. This is because it was configured to level trigger type by luck. It fell into the default PCI trigger category which is level triggered. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> LKML-Reference: <20101111155019.12924.569.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11x86: mrst: Add audio driver bindingsVinod Koul
This patch adds the sound card bindings for Moorestown (pmic_audio) and the Medfield platform (msic_audio) as IPC devices. This ensures they will be created at the right time. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> LKML-Reference: <20101110174044.11340.78008.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11rtc: Add drivers/rtc/rtc-mrst.cFeng Tang
Provide the standard kernel rtc driver interface on top of the vrtc layer added in the previous patch. Signed-off-by: Feng Tang <feng.tang@intel.com> LKML-Reference: <20101110172911.3311.20593.stgit@localhost.localdomain> [Fixed swapped arguments on IPC] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> [Cleaned up and the device creation moved to arch/x86/platform] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11x86: mrst: Add vrtc driver which serves as a wall clock deviceFeng Tang
Moorestown platform doesn't have a m146818 RTC device like traditional x86 PC, but a firmware emulated virtual RTC device(vrtc), which provides some basic RTC functions like get/set time. vrtc serves as the only wall clock device on Moorestown platform. [ tglx: Changed the exports to _GPL ] Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> LKML-Reference: <20101110172837.3311.40483.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11x86: mrst: Add Moorestown specific reboot/shutdown supportAlek Du
Moorestowns needs to use a special IPC command to reboot or shutdown the platform. Signed-off-by: Alek Du <alek.du@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> LKML-Reference: <20101110164928.6365.94243.stgit@localhost.localdomain> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-26 14:21:09 +0000