summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)Author
2008-01-11[CRYPTO] aes-asm: Merge common glue codeSebastian Siewior
32 bit and 64 bit glue code is using (now) the same piece code. This patch unifies them. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aes-i586: Remove setkeySebastian Siewior
The setkey() function can be shared with the generic algorithm. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aes-x86-64: Remove setkeySebastian Siewior
The setkey() function can be shared with the generic algorithm. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aes: Move common defines into a header fileSebastian Siewior
This three defines are used in all AES related hardware. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-17x86: simplify "make ARCH=x86" and fix kconfig all.configSam Ravnborg
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: 0f855aa64b3f63d35a891510cf7db932a435c116 -> kconfig: add helper to set config symbol from environment variable 2a113281f5cd2febbab21a93c8943f8d3eece4d3 -> kconfig: use $K64BIT to set 64BIT with all*config targets Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-17x86: reboot fixup for wrap2c boardDenys
Needed to make the wireless board, WRAP2C reboot. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: check boundary in count setup resourceYinghai Lu
need to check info->res_num less than PCI_BUS_NUM_RESOURCES, so info->bus->resource[info->res_num] = res will not beyond of bus resource array when acpi returns too many resource entries. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gary Hade <gary.hade@us.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: add hpet sanity checksThomas Gleixner
Some BIOSes advertise HPET at 0x0. We really do no want to allocate a resource there. Check for it and leave early. Other BIOSes tell us the HPET is at 0xfed0000000000000 instead of 0xfed00000. Add a check and fix it up with a warning on user request. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: on x86_64, correct reading of PC RTC when update in progress in time_64.cDavid P. Reed
Correct potentially unstable PC RTC time register reading in time_64.c Stop the use of an incorrect technique for reading the standard PC RTC timer, which is documented to "disconnect" time registers from the bus while updates are in progress. The use of UIP flag while interrupts are disabled to protect a 244 microsecond window is one of the Motorola spec sheet's documented ways to read the RTC time registers reliably. tglx: removed locking changes from original patch, as they gain nothing (read_persistent_clock is only called during boot, suspend, resume - so no hot path affected) and conflict with the paravirt locking scheme (see 32bit code), which we do not want to complicate for no benefit. Signed-off-by: David P. Reed <dpreed@reed.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: fix freeze in x86_64 RTC update code in time_64.cDavid P. Reed
Fix hard freeze on x86_64 when the ntpd service calls update_persistent_clock() A repeatable but randomly timed freeze has been happening in Fedora 6 and 7 for the last year, whenever I run the ntpd service on my AMD64x2 HP Pavilion dv9000z laptop. This freeze is due to the use of spin_lock(&rtc_lock) under the assumption (per a bad comment) that set_rtc_mmss is called only with interrupts disabled. The call from ntp.c to update_persistent_clock is made with interrupts enabled. Signed-off-by: David P. Reed <dpreed@reed.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: fixup cpu_info array conversionThomas Gleixner
92cb7612aee39642d109b8d935ad265e602c0563 sets cpu_info->cpu_index to zero for no reason. Referencing cpu_info->cpu_index now points always to CPU#0, which is apparently not what we want. Remove it. Spotted-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: show cpuinfo only for online CPUsAndreas Herrmann
Fix regressions introduced with 92cb7612aee39642d109b8d935ad265e602c0563. It can happen that cpuinfo is displayed for CPUs that are not online or even worse for CPUs not present at all. As an example, following was shown for a "second" CPU of a single core K8 variant: processor : 0 vendor_id : unknown cpu family : 0 model : 0 model name : unknown stepping : 0 cache size : 0 KB fpu : yes fpu_exception : yes cpuid level : 0 wp : yes flags : bogomips : 0.00 clflush size : 0 cache_alignment : 0 address sizes : 0 bits physical, 0 bits virtual power management: Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: fix cpu-hotplug regressionAndreas Herrmann
Commit d435d862baca3e25e5eec236762a43251b1e7ffc ("cpu hotplug: mce: fix cpu hotplug error handling") changed the error handling in mce_cpu_callback. In cases where not all CPUs are brought up during boot (e.g. using maxcpus and additional_cpus parameters) mce_cpu_callback now returns NOTFIY_BAD because for such CPUs cpu_data is not completely filled when the notifier is called. Thus mce_create_device fails right at its beginning: if (!mce_available(&cpu_data[cpu])) return -EIO; As a quick fix I suggest to check boot_cpu_data for MCE. To reproduce this regression: (1) boot with maxcpus=2 addtional_cpus=2 on a 4 CPU x86-64 system (2) # echo 1 >/sys/devices/system/cpu/cpu2/online -bash: echo: write error: Invalid argument dmesg shows: _cpu_up: attempt to bring up CPU 2 failed Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: ignore the sys_getcpu() tcache parameterIngo Molnar
dont use the vgetcpu tcache - it's causing problems with tasks migrating, they'll see the old cache up to a jiffy after the migration, further increasing the costs of the migration. In the worst case they see a complete bogus information from the tcache, when a sys_getcpu() call "invalidated" the cache info by incrementing the jiffies _and_ the cpuid info in the cache and the following vdso_getcpu() call happens after vdso_jiffies have been incremented. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: fix smp init sectionsRandy Dunlap
Fix Voyager section mismatch due to using __devinit instead of __cpuinit. WARNING: vmlinux.o(.text+0xd943): Section mismatch: reference to .init.text:init_gdt (between 'voyager_smp_prepare_boot_cpu' and 'smp_vic_cmn_interrupt') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-17x86: fix voyager_cat_init sectionRandy Dunlap
Fix Voyager section mismatches: voyager_cat_init() should be __init. WARNING: vmlinux.o(.text+0xee83): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeea6): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeeac): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeeb2): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xef4c): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xef56): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf10f): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf13b): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf14b): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf159): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1b1): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1bb): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1c1): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1c7): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1e6): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-16Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix up whitespace in conservative governor. [CPUFREQ] Make cpufreq_conservative handle out-of-sync events properly [CPUFREQ] architectural pstate driver for powernow-k8
2007-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86: x86: enable "make ARCH=x86" x86: do not use $(ARCH) when not needed kconfig: use $K64BIT to set 64BIT with all*config targets kconfig: add helper to set config symbol from environment variable kconfig: factor out code in confdata.c x86: move the rest of the menu's to Kconfig x86: move all simple arch settings to Kconfig x86: copy x86_64 specific Kconfig symbols to Kconfig.i386 x86: add X86_64 dependency to x86_64 specific symbols in Kconfig.x86_64 x86: add X86_32 dependency to i386 specific symbols in Kconfig.i386 x86: arch/x86/Kconfig.cpu unification x86: start unification of arch/x86/Kconfig.* x86: unification of cfufreq/Kconfig
2007-11-14x86: don't call mce_create_device on CPU_UP_PREPAREAndreas Herrmann
Fix regression introduced with d435d862baca3e25e5eec236762a43251b1e7ffc ("cpu hotplug: mce: fix cpu hotplug error handling"). A CPU which was not brought up during boot (using maxcpus and additional_cpus parameters) couldn't be onlined anymore. For such a CPU it seemed that MCE was not supported during CPU_UP_PREPARE-time which caused mce_cpu_callback to return NOTIFY_BAD to notifier_call_chain. To fix this we: - call mce_create_device for CPU_ONLINE event (instead of CPU_UP_PREPARE), - avoid mce_remove_device() for the CPU that is not correctly initialized by mce_create_device() failure, - make mce_cpu_callback always return NOTIFY_OK for CPU_ONLINE event. Because CPU_ONLINE callback return value is always ignored. [akinobu.mita@gmail.com: avoid mce_remove_device() for not initialized device] [akinobu.mita@gmail.com: make mce_cpu_callback always return NOTIFY_OK] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14x86: disable preemption in delay_tsc()Andrew Morton
Marin Mitov points out that delay_tsc() can misbehave if it is preempted and rescheduled on a different CPU which has a skewed TSC. Fix it by disabling preemption. (I assume that the worst-case behaviour here is a stall of 2^32 cycles) Cc: Andi Kleen <ak@suse.de> Cc: Marin Mitov <mitov@issp.bas.bg> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-12x86: enable "make ARCH=x86"Sam Ravnborg
After unification of the Kconfig files and introducing K64BIT support in kconfig it required only trivial changes to enable "make ARCH=x86". With this patch you can build for x86_64 in several ways: 1) make ARCH=x86_64 2) make ARCH=x86 K64BIT=y 3) make ARCH=x86 menuconfig => select 64-bit Likewise for i386 with the addition that i386 is default is you say ARCH=x86. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: do not use $(ARCH) when not neededSam Ravnborg
For x86 ARCH may say i386 or x86_64 and soon x86. Rely on CONFIG_X64_32 to select between 32/64 or just hardcode the value as appropriate. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: move the rest of the menu's to KconfigSam Ravnborg
With this patch we have all the Kconfig file shared between i386 and x86_64. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: move all simple arch settings to KconfigSam Ravnborg
Most of the arch settings were equal so combine them in the first part of Kconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: copy x86_64 specific Kconfig symbols to Kconfig.i386Sam Ravnborg
No functional changes. A prepatory step towards full unification. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: add X86_64 dependency to x86_64 specific symbols in Kconfig.x86_64Sam Ravnborg
To ease unification of Kconfig.i386 and Kconfig.x86_64 add X86_64 dependencies to all x86_64 specific symbols. This patch introduce no functional changes but is one step towards unification. This smaller step is used to ease review of the patch set. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: add X86_32 dependency to i386 specific symbols in Kconfig.i386Sam Ravnborg
To ease unification of Kconfig.i386 and Kconfig.x86_64 add X86_32 dependencies to all i386 specific symbols. This patch introduce no functional changes but is one step towards unification. This smaller step is used to ease review of the patch set. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: arch/x86/Kconfig.cpu unificationSam Ravnborg
Move all CPU definitions to Kconfig.cpu Always define X86_MINIMUM_CPU_FAMILY and do the obvious code cleanup in boot/cpucheck.c Comments from: Adrian Bunk <bunk@kernel.org> incorporated. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Brian Gerst <bgerst@didntduck.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: start unification of arch/x86/Kconfig.*Sam Ravnborg
This step introduces the file arch/x86/Kconfig which contains all the menu's from "Power Management" and below. The main part of the new Kconfig file is shared and the remaining i386/x86_64 specific symbols are covered by dependencies. A x86_64 allmodconfig build did not show any differences. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12x86: unification of cfufreq/KconfigSam Ravnborg
Merge the two Kconfig files to a single file. Checked using make allmodconfig for x86_64. No changes in build. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@kernel.org> Cc: Dave Jones <davej@codemonkey.org.uk>
2007-11-12x86: fix taking DNA during 64bit sigreturnSiddha, Suresh B
restore sigcontext is taking a DNA exception while restoring FP context from the user stack, during the sigreturn. Appended patch fixes it by doing clts() if the app doesn't touch FP during the signal handler execution. This will stop generating a DNA, during the fxrstor in the sigreturn. This improves 64-bit lat_sig numbers by ~30% on my core2 platform. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-10x86 - 32-bit ptrace emulation mishandles 6th argChuck Ebbert
[ jdike - Pushing Chuck's patch - see http://lkml.org/lkml/2005/9/16/261 for some history and a test program. UML is also broken without this patch - its processes get SIGBUS from the corrupt 6th argument to mmap being interpretted as a file offset ] When the 32-bit vDSO is used to make a system call, the %ebp register for the 6th syscall arg has to be loaded from the user stack (where it's pushed by the vDSO user code). The native i386 kernel always does this before stopping for syscall tracing, so %ebp can be seen and modified via ptrace to access the 6th syscall argument. The x86-64 kernel fails to do this, presenting the stack address to ptrace instead. This makes the %rbp value seen by 64-bit ptrace of a 32-bit process, and the %ebp value seen by a 32-bit caller of ptrace, both differ from the native i386 behavior. This patch fixes the problem by putting the word loaded from the user stack into %rbp before calling syscall_trace_enter, and reloading the 6th syscall argument from there afterwards (so ptrace can change it). This makes the behavior match that of i386 kernels. Original-Patch-By: Roland McGrath <roland@redhat.com> Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-10x86_64: ia32 ptrace THREAD_AREA fixRoland McGrath
The addr argument to PTRACE_GET_THREAD_AREA and PTRACE_SET_THREAD_AREA is not a magic constant. It's derived from the segment register values being used, which are computed originally from the index used with set_thread_area. The value does not need to match what a native i386 kernel would accept. It needs to match the segment selectors that can actually be in use in this 32-bit process. The 64-bit ptrace support for PTRACE_GET_THREAD_AREA (normally used only on 32-bit processes) is correct, but the 32-bit emulation of ptrace is broken. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-09x86: make nmi_cpu_busy() always definedIngo Molnar
nmi_cpu_busy() must be available on !SMP too. this is in preparation to a smp_call_function_mask() fix. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-09x86: make ipi_handler() always definedIngo Molnar
prepare for up_smp_call_function() to ensure that the 'func' pointer is unused. (which is related to a KVM build fix) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-05Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest: lguest: tidy up documentation kernel/futex.c: make 3 functions static unexport access_process_vm lguest: make async_hcall() static
2007-11-05lguest: tidy up documentationRusty Russell
After Adrian Bunk's "make async_hcall static" moved things around, update comments to match (aka "make Guest"). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-05lguest: make async_hcall() staticAdrian Bunk
async_hcall() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-11-04x86 setup: set %ebx == %ebp == %edi == 0 on protected mode entryH. Peter Anvin
In accordance with the newly formalized 32-bit boot protocol, set %ebx == %ebp == %edi == 0 in order to support future extensions to the protocol. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-04x86 setup: add a near jump to serialize %cr0 on 386/486H. Peter Anvin
The 386 and 486 needs a jump immediately after setting %cr0 in order to serialize the pipeline. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-11-03Merge branch 'v2.6.24-rc1-lockdep' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: lockdep: fix a typo in the __lock_acquire comment sched: fix unconditional irq lock lockdep: fixup irq tracing
2007-10-30Remove bogus default y for DMAR and NET_DMAAndi Kleen
No reason I can think of of making them default y Most people don't have the hardware and with default y they just pollute lots of configs during make oldconfig. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: "Nelson, Shannon" <shannon.nelson@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-30remove the dead X86_REMOTE_DEBUG optionAdrian Bunk
This patch removes the dead X86_REMOTE_DEBUG option. Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-30x86: merge EARLY_PRINTK optionsAdrian Bunk
This patch merges the x86_64 EARLY_PRINTK option into the i386 one. Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-30x86: mm/discontig_32.c: make code staticAdrian Bunk
node0_bdata and paddr_to_nid() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30x86: kernel/setup_32.c: unexport machine_idAdrian Bunk
This patch removes the unused EXPORT_SYMBOL(machine_id). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30x86 gart: rename symbols only used for the GART implementationJoerg Roedel
This patch renames the 4 symbols iommu_hole_init(), iommu_aperture, iommu_aperture_allowed, iommu_aperture_disabled. All these symbols are only used for the GART implementation of IOMMUs. It adds and additional gart_ prefix to them. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30x86 gart: make some variables and functions staticJoerg Roedel
This patch makes some functions and variables static in pci-gart_64.c which are not used somewhere else. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30x86 gart: rename CONFIG_IOMMU to CONFIG_GART_IOMMUJoerg Roedel
This patch renames the IOMMU config option to GART_IOMMU because in fact it means the GART and not general support for an IOMMU on x86. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-30x86 gart: rename iommu.h to gart.hJoerg Roedel
This patch renames the include file asm-x86/iommu.h to asm-x86/gart.h to make clear to which IOMMU implementation it belongs. The patch also adds "GART" to the Kconfig line. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-29 12:11:39 +0000