summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)Author
2007-10-27x86: Dump filtering supports x86_64 sparsememKen'ichi Ohmichi
This patch adds the symbol "init_level4_pgt" to the vmcoreinfo data so that makedumpfile (dump filtering command) supports x86_64 sparsemem kernel of linux-2.6.24. makedumpfile creates a small dumpfile by excluding unnecessary pages for the analysis. It checks attributes in page structures and distinguishes necessary pages and unnecessary ones. To check them, makedumpfile gets the vmcoreinfo data which has the minimum debugging information only for dump filtering. For older x86_64 kernel (linux-2.6.23 or before), makedumpfile translates the virtual address of page structure into physical address by subtracting PAGE_OFFSET from virtual address, but this translation isn't effective for linux-2.6.24 sparsemem kernel, because its page structures are in virtual memmap area. makedumpfile should translate their virtual address by 4-levels paging and it needs the symbol "init_level4_pgt". Signed-off-by: Ken'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-27x86: fix compiler warnings in arch/x86/kernel/early-quirks.cJeff Garzik
fix this warning: arch/x86/kernel/early-quirks.c:40: warning: nvidia_hpet_check defined but not used Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-27x86: fix !SMP compiler warning in arch/x86/kernel/acpi/processor.cJeff Garzik
Fix !CONFIG_SMP warning: arch/x86/kernel/acpi/processor.c: In function arch_acpi_processor_init_pdc: arch/x86/kernel/acpi/processor.c:65: warning: unused variable cpu Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-27x86: Fix boot protocol KEEP_SEGMENTS check.Eric W. Biederman
The kernel only ever supports 1 version of the boot protocol so there is no need to check the boot protocol revision to see if a feature is supported. Both x86 and x86_64 support the same boot protocol so we need to implement the KEEP_SEGMENTS on x86_64 as well. It isn't just paravirt bootloaders that could use this functionality. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-27x86: voyager: fix bogus conversion to per_cpu for boot_cpu_infoJames Bottomley
There were two problems. Firstly, someone forgot the struct keyword in front of cpuinfo_x86, so I take it this wasn't even compile checked. Secondly, the actual definition has this as a SHARED_ALIGNED, so the definitions mismatch. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-27x86: export smp_ops to allow modular build of KVMThomas Gleixner
KVM uses smp_call_function_mask and therefor need smp_ops to be exported. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-27Revert "i386: export i386 smp_call_function_mask() to modules"Thomas Gleixner
This reverts commit 6442eea937ef797d4b66733f49c82e2fdc2aca6f. The patch breaks smp_ops and needs to be reverted. The solution to allow modular build of KVM is to export smp_ops instead. Pointed-out-by: James Bottomley <jejb> tglx, so write out 100 times "voyager is a useful architecture" ... <tglx> yes, Sir Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: x86 setup: sizeof() is unsigned, unbreak comparisons x86 setup: handle boot loaders which set up the stack incorrectly
2007-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/x86: x86: kill the old i386 and x86_64 directories x86: move i386 and x86_64 Kconfig files to x86 directory kconfig: small code refactoring in kconfig Makefile x86: unification of i386 and x86_64 Kconfig.debug x86: move defconfig files for i386 and x86_64 to x86 x86: move i386 and x86_64 Makefiles to arch/x86
2007-10-25x86 setup: sizeof() is unsigned, unbreak comparisonsH. Peter Anvin
We use signed values for limit checking since the values can go negative under certain circumstances. However, sizeof() is unsigned and forces the comparison to be unsigned, so move the comparison into the heap_free() macros so we can ensure it is a signed comparison. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-25x86 setup: handle boot loaders which set up the stack incorrectlyH. Peter Anvin
Apparently some specific versions of LILO enter the kernel with a stack pointer that doesn't match the rest of the segments. Make our best attempt at untangling the resulting mess. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2007-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: fix bogus KERN_ALERT on oops x86: lguest build fix x86: fix CONFIG_KEXEC build breakage
2007-10-25Merge branch 'sg' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'sg' of git://git.kernel.dk/linux-2.6-block: fix sg_phys to use dma_addr_t ub: add sg_init_table for sense and read capacity commands x86: pci-gart fix blackfin: fix sg fallout xtensa: dma-mapping.h is using linux/scatterlist.h functions, so include it SG: audit of drivers that use blk_rq_map_sg() arch/um/drivers/ubd_kern.c: fix a building error SG: Change sg_set_page() to take length and offset argument AVR32: Fix sg_page breakage mmc: sg fallout m68k: sg fallout More SG build fixes sg: add missing sg_init_table calls to zfcp SG build fix
2007-10-25x86: move i386 and x86_64 Kconfig files to x86 directorySam Ravnborg
After a small change in kconfig Makefile we could move all x86 Kconfig files to x86 directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25x86: unification of i386 and x86_64 Kconfig.debugRandy Dunlap
Adding proper dependencies so the two Kconfig.debug files are now identical and move the result file to x86. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25x86: move defconfig files for i386 and x86_64 to x86Sam Ravnborg
With some small changes to kconfig makefile we can now locate the defconfig files for i386 and x86_64 in the configs/ subdirectory under x86. make ARCH=i386 defconfig and make defconfig works as expected also after this change. But arch maintainers shall now update a defconfig file in the configs/ directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25x86: move i386 and x86_64 Makefiles to arch/x86Sam Ravnborg
Moving the ARCH specific Makefiles for i386 and x86_64 required a litle bit tweaking in the top-lvel Makefile. SRCARCH is now set in the top-level Makefile because we need this info to include the correct arch Makefile. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25x86: pci-gart fixFUJITA Tomonori
map_sg could copy the last sg element to another position (if merging some elements). It breaks sg chaining. This copies only dma_address/length instead of the whole sg element. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-25lguest: documentation updateRusty Russell
Went through the documentation doing typo and content fixes. This patch contains only comment and whitespace changes. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-25lguest: build fixJeff Garzik
Fix this error (i386 !SMP build) arch/x86/lguest/boot.c: In function ‘lguest_init’: arch/x86/lguest/boot.c:1059: error: ‘pm_power_off’ undeclared (first use in this function) by including linux/pm.h. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-25lguest: use defines from x86 headers instead of magic numbersRusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-24x86: fix bogus KERN_ALERT on oopsAlexey Dobriyan
fix this: printing eip: f881b9f3 *pdpt = 0000000000003001 <1>*pde = 000000000480a067 *pte = 0000000000000000 ^^^ [ mingo: added KERN_CONT as suggested by Pekka Enberg ] Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-24x86: lguest build fixJeff Garzik
Fix this error (i386 !SMP build): arch/x86/lguest/boot.c: In function lguest_init: arch/x86/lguest/boot.c:1059: error: pm_power_off undeclared (first use in this function) by including linux/pm.h. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-24x86: fix CONFIG_KEXEC build breakageMike Galbraith
X86_32 build fix to commit 62a31a03b3d2a9d20e7a073e2cd9b27bfb7d6a3f Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23Merge branch 'irq-upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'irq-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriate drivers/char/riscom8: clean up irq handling isdn/sc: irq handler clean isdn/act2000: fix major bug. clean irq handler. char/pcmcia/synclink_cs: trim trailing whitespace drivers/char/ip2: separate polling and irq-driven work entry points drivers/char/ip2: split out irq core logic into separate function [NETDRVR] lib82596, netxen: delete pointless tests from irq handler Eliminate pointless casts from void* in a few driver irq handlers. [PARPORT] Remove unused 'irq' argument from parport irq functions [PARPORT] Kill useful 'irq' arg from parport_{generic_irq,ieee1284_interrupt} [PARPORT] Consolidate code copies into a single generic irq handler
2007-10-23[SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriateJeff Garzik
Rather than hand-rolling our own prototype, make the code more future-proof by using the standard irq_handler_t typedef. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-23x86: Add HPET force support for MCP55 (nForce 5) chipsetsCarlos Corbacho
Add support to force_hpet for all known MCP55 (nForce 5) chipset LPC bridges. These are the untested nForce 5 chips (taken from Mikko's original patch, and checked against pci.ids). Signed-off-by: Carlos Corbacho <cathectic@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> arch/x86/kernel/quirks.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
2007-10-23x86: Force enable HPET for CK804 (nForce 4) chipsetsCarlos Corbacho
This patch adds a quirk from LinuxBIOS to force enable HPET on the nVidia CK804 (nForce 4) chipset. This quirk can very likely support more than just nForce 4 (LinuxBIOS use the same code for nForce 5), and possibly nForce 3, but I don't have those chipsets, so cannot add and test them. Tested on an Abit KN9 (CK804). Signed-off-by: Carlos Corbacho <cathectic@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Documentation/kernel-parameters.txt | 3 +- arch/x86/kernel/quirks.c | 37 +++++++++++++++++++++++++++++++++++- 2 files changed, 38 insertions(+), 2 deletions(-)
2007-10-23x86: clean up setup.h and the boot codeH. Peter Anvin
Make <asm/setup.h> usable by the boot code. Clean up vestiges of the old command-line protocol from setup.h and head_32.S (it is still supported from the boot loader point of view, since it is converted to the new command-line protocol by the boot code.) Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: Save registers in saved_context during suspend and hibernationRafael J. Wysocki
During hibernation and suspend on x86_64 save CPU registers in the saved_context structure rather than in a handful of separate variables. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: whitespace cleanup of mce_64.cThomas Gleixner
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: consolidate the cpu/ related code usageThomas Gleixner
The x86_64 arch/x86/kernel/Makefile uses references into arch/x86/kernel/cpu/... to use code from there. Unifiy it with the nicely structured i386 way and reuse the existing subdirectory make rules. Also move the machine check related source into ...kernel/cpu/mcheck, where the other machine check related code is. No code change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-23x86: prepare consolidation of cpu/ related code usageThomas Gleixner
Move mce.c to mce_32.c to allow the later move of the x86_64 mce.c from arch/x86/kernel/ to ...kernel/cpu/mcheck No code change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-23x86: prepare consolidation of cpu/ related MakefilesThomas Gleixner
Prepare the makefiles in x86/kernel/cpu and x86/kernel/cpu/mcheck to be used by the x86_64 build as well. No code change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-23x86: Unify arch/x86/kernel/acpi MakefilesThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-23x86: merge arch/x86/crypto MakefilesThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-23x86: unify crash_32/64.cHiroshi Shimamoto
Most of contents in crash are same. Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: add lapic_shutdown for x86_64Hiroshi Shimamoto
Preperatory patch to allow crash_32/64.c merging Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: ARRAY_SIZE cleanupAlejandro Martinez Ruiz
Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: fix more TSC clock source calibration errorsDave Johnson
The previous patch wasn't correctly handling the 'count' variable. If a CPU gave bad results on the 1st or 2nd run but good results on the 3rd, it wouldn't do the correct thing. No idea if any such CPU exists, but the patch below handles that case by discarding the bad runs. If a bad result (too quick, or too slow) occurs on any of the 3 runs it will be discarded. Also updated some comments to explain what's going on. Signed-off-by: Dave Johnson <djohnson@sw.starentnetworks.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: fix TSC clock source calibration errorDave Johnson
I ran into this problem on a system that was unable to obtain NTP sync because the clock was running very slow (over 10000ppm slow). ntpd had declared all of its peers 'reject' with 'peer_dist' reason. On investigation, the tsc_khz variable was significantly incorrect causing xtime to run slow. After a reboot tsc_khz was correct so I did a reboot test to see how often the problem occurred: Test was done on a 2000 Mhz Xeon system. Of 689 reboots, 8 of them had unacceptable tsc_khz values (>500ppm): range of tsc_khz # of boots % of boots ---------------- ---------- ---------- < 1999750 0 0.000% 1999750 - 1999800 21 3.048% 1999800 - 1999850 166 24.128% 1999850 - 1999900 241 35.029% 1999900 - 1999950 211 30.669% 1999950 - 2000000 42 6.105% 2000000 - 2000000 0 0.000% 2000050 - 2000100 0 0.000% [...] 2000100 - 2015000 1 0.145% << BAD 2015000 - 2030000 6 0.872% << BAD 2030000 - 2045000 1 0.145% << BAD 2045000 < 0 0.000% The worst boot was 2032.577 Mhz, over 1.5% off! It appears that on rare occasions, mach_countup() is taking longer to complete than necessary. I suspect that this is caused by the CPU taking a periodic SMI interrupt right at the end of the 30ms calibration loop. This would cause the loop to delay while the SMI BIOS hander runs. The resulting TSC value is beyond what it actually should be resulting in a higher tsc_khz. The below patch makes native_calculate_cpu_khz() take the best (shortest duration, lowest khz) run of it's 3 calibration loops. If a SMI goes off causing a bad result (long duration, higher khz) it will be discarded. With the patch applied, 300 boots of the same system produce good results: range of tsc_khz # of boots % of boots ---------------- ---------- ---------- < 1999750 0 0.000% 1999750 - 1999800 30 10.000% 1999800 - 1999850 166 55.333% 1999850 - 1999900 89 29.667% 1999900 - 1999950 15 5.000% 1999950 < 0 0.000% Problem was found and tested against 2.6.18. Patch is against 2.6.22. Signed-off-by: Dave Johnson <djohnson@sw.starentnetworks.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23x86: add instrumentation menuAdrian Bunk
It seems commit 09cadedbdc01f1a4bea1f427d4fb4642eaa19da9 was incomplete due to a clash with the x86 architecture merge. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-23Revert lguest magic and use hook in head.SRusty Russell
Version 2.07 of the boot protocol uses 0x23C for the hardware_subarch field, that for lguest is "1". This allows us to use the standard boot entry point rather than the "GenuineLguest" string hack. The standard entry point also clears the BSS and copies the boot parameters and commandline for us, saving more code. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Lguest support for VirtioRusty Russell
This makes lguest able to use the virtio devices. We change the device descriptor page from a simple array to a variable length "type, config_len, status, config data..." format, and implement virtio_config_ops to read from that config data. We use the virtio ring implementation for an efficient Guest <-> Host virtqueue mechanism, and the new LHCALL_NOTIFY hypercall to kick the host when it changes. We also use LHCALL_NOTIFY on kernel addresses for very very early console output. We could have another hypercall, but this hack works quite well. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Remove old lguest bus and drivers.Rusty Russell
This gets rid of the lguest bus, drivers and DMA mechanism, to make way for a generic virtio mechanism. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Virtio helper routines for a descriptor ringbuffer implementationRusty Russell
These helper routines supply most of the virtqueue_ops for hypervisors which want to use a ring for virtio. Unlike the previous lguest implementation: 1) The rings are variable sized (2^n-1 elements). 2) They have an unfortunate limit of 65535 bytes per sg element. 3) The page numbers are always 64 bit (PAE anyone?) 4) They no longer place used[] on a separate page, just a separate cacheline. 5) We do a modulo on a variable. We could be tricky if we cared. 6) Interrupts and notifies are suppressed using flags within the rings. Users need only get the ring pages and provide a notify hook (KVM wants the guest to allocate the rings, lguest does it sanely). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Dor Laor <dor.laor@qumranet.com>
2007-10-23Boot with virtual == physical to get closer to native Linux.Rusty Russell
1) This allows us to get alot closer to booting bzImages. 2) It means we don't have to know page_offset. 3) The Guest needs to modify the boot pagetables to create the PAGE_OFFSET mapping before jumping to C code. 4) guest_pa() walks the page tables rather than using page_offset. 5) We don't use page_offset to figure out whether to emulate: it was always kinda quesationable, and won't work for instructions done before remapping (bzImage unpacking in particular). 6) We still want the kernel address for tlb flushing: have the initial hypercall give us that, too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Allow guest to specify syscall vector to use.Rusty Russell
(Based on Ron Minnich's LGUEST_PLAN9_SYSCALL patch). This patch allows Guests to specify what system call vector they want, and we try to reserve it. We only allow one non-Linux system call vector, to try to avoid DoS on the Host. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Make hypercalls arch-independent.Jes Sorensen
Clean up the hypercall code to make the code in hypercalls.c architecture independent. First process the common hypercalls and then call lguest_arch_do_hcall() if the call hasn't been handled. Rename struct hcall_ring to hcall_args. This patch requires the previous patch which reorganize the layout of struct lguest_regs on i386 so they match the layout of struct hcall_args. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2007-10-23Move i386 part of core.c to x86/core.c.Jes Sorensen
Separate i386 architecture specific from core.c and move it to x86/core.c and add x86/lguest.h header file to match. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-17 16:29:43 +0000