summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)Author
2008-10-09[CPUFREQ] correct broken links and email addressesNémeth Márton
Replace the no longer working links and email address in the documentation and in source code. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Dave Jones <davej@redhat.com>
2008-10-06Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: call touch_softlockup_watchdog on resume kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMI
2008-10-06Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: gart iommu have direct mapping when agp is present too
2008-10-06kgdb, x86: Avoid invoking kgdb_nmicallback twice per NMIJan Kiszka
Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest, I came across spurious unhandled NMIs while running the singlestep test. Looking closer at the code path each NMI takes when KGDB is enabled, I noticed that kgdb_nmicallback is called twice per event: One time via DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first invocation cures the unhandled NMIs here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-10-06x86 ACPI: Blacklist two HP machines with buggy BIOSesRafael J. Wysocki
There is a bug in the BIOSes of some HP boxes with AMD Turions which connects IO-APIC pins with ACPI thermal trip points in such a way that if the state of the IO-APIC is not as expected by the (buggy) BIOS, the thermal trip points are set to insanely low values (usually all of them become 16 degrees Celsius). As a result, thermal throttling kicks in and knock the system down to its shoes. Unfortunately some of the recent IO-APIC changes made the bug show up. To prevent this from happening, blacklist machines that are known to be affected (nx6115 and 6715b in this particular case). This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as a regression from 2.6.26. On my box it was caused by: commit 691874fa96d6349a8b60f8ea9c2bae52ece79941 Author: Maciej W. Rozycki <macro@linux-mips.org> Date: Tue May 27 21:19:51 2008 +0100 x86: I/O APIC: timer through 8259A second-chance Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> and the whole story is described in this (huge) thread: http://marc.info/?l=linux-kernel&m=121358440508410&w=4 Matthew Garrett told us about that happening on the nx6125: http://marc.info/?l=linux-kernel&m=121396307411930&w=4 and then Maciej analysed the breakage on the basis of a DSDT from the nx6325: http://marc.info/?l=linux-kernel&m=121401068718826&w=4 As far as the Dmitry's and Jason's boxes are concerned, I recognized the symptoms and asked them to verify that the blacklisting helped. It appears that the buggy BIOS code has been copy-pasted to the entire range of machines, for no good reason. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Jason Vas Dias <jason.vas.dias@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-05x86: gart iommu have direct mapping when agp is present tooYinghai Lu
move init_memory_mapping() out of init_k8_gatt. for: http://bugzilla.kernel.org/show_bug.cgi?id=11676 2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression This is needed because we need to map the GART aperture even if the GATT is not initialized. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-03x86 setup: correct segfault in generation of 32-bit reloc kernelH. Peter Anvin
Impact: segfault on build of a 32-bit relocatable kernel When converting arch/x86/boot/compressed/relocs.c to support unlimited sections, the computation of sym_strtab in walk_relocs() was done incorrectly. This causes a segfault for some people when building the relocatable 32-bit kernel. Pointed out by Anonymous <pageexec@freemail.hu>. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-10-01Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vmi: fix broken LDT access x86: fix typo in enable_mtrr_cleanup early parameter
2008-09-30x86, vmi: fix broken LDT accessZachary Amsden
This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: stable@kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30x86: Fix broken LDT access in VMIZachary Amsden
After investigating a JRE failure, I found this bug was introduced a long time ago, and had already managed to survive another bugfix which occurred on the same line. The result is a total failure of the JRE due to LDT selectors not working properly. This one took a long time to rear up because LDT usage is not very common, but the bug is quite serious. It got introduced along with another bug, already fixed, by 75b8bb3e56ca09a467fbbe5229bc68627f7445be Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Glauber de Oliveira Costa <gcosta@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-30x86: fix typo in enable_mtrr_cleanup early parameterJ.A. Magallón
Correct typo for 'enable_mtrr_cleanup' early boot param name. Signed-off-by: J.A. Magallon <jamagallon@ono.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-29Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: disable apm on the olpc
2008-09-26kgdb, x86_64: fix PS CS SS registers in gdb serialJason Wessel
On x86_64 the gdb serial register structure defines the PS (also known as eflags), CS and SS registers as 4 bytes entities. This patch splits the x86_64 regnames enum into a 32 and 64 version to account for the 32 bit entities in the gdb serial packets. Also the program counter is properly filled in for the sleeping threads. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-26kgdb, x86, arm, mips, powerpc: ignore user space single steppingJason Wessel
On the x86 arch, user space single step exceptions should be ignored if they occur in the kernel space, such as ptrace stepping through a system call. First check if it is kgdb that is executing a single step, then ensure it is not an accidental traversal into the user space, while in kgdb, any other time the TIF_SINGLESTEP is set, kgdb should ignore the exception. On x86, arm, mips and powerpc, the kgdb_contthread usage was inconsistent with the way single stepping is implemented in the kgdb core. The arch specific stub should always set the kgdb_cpu_doing_single_step correctly if it is single stepping. This allows kgdb to correctly process an instruction steps if ptrace happens to be requesting an instruction step over a system call. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-24Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: prevent stale state of c1e_mask across CPU offline/online, fix
2008-09-24x86: disable apm on the olpcJeremy Katz
The OLPC doesn't support APM but also doesn't have DMI, so we can't detect and disable it based on DMI data. So, just disable based on machine_is_olpc() Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-24x86: prevent stale state of c1e_mask across CPU offline/online, fixMarc Dionne
Fix build error introduced by commit 4faac97d44ac27 ("x86: prevent stale state of c1e_mask across CPU offline/online"). process_32.c needs to include idle.h to get the prototype for c1e_remove_cpu() Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-23Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timers: fix build error in !oneshot case x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSC x86: prevent C-states hang on AMD C1E enabled machines clockevents: prevent mode mismatch on cpu online clockevents: check broadcast device not tick device clockevents: prevent stale tick_next_period for onlining CPUs x86: prevent stale state of c1e_mask across CPU offline/online clockevents: prevent cpu online to interfere with nohz
2008-09-23Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix 27-rc crash on vsmp due to paravirt during module load x86, oprofile: BUG scheduling while atomic AMD IOMMU: protect completion wait loop with iommu lock AMD IOMMU: set iommu sunc flag after command queuing
2008-09-23x86: c1e_idle: don't mark TSC unstable if CPU has invariant TSCAndreas Herrmann
Impact: Functional TSC is marked unstable on AMD family 0x10 and 0x11 CPUs. This would be wrong because for those CPUs "invariant TSC" means: "The TSC counts at the same rate in all P-states, all C states, S0, or S1" (See "Processor BIOS and Kernel Developer's Guides" for those CPUs.) [ tglx: Changed C1E to AMD C1E in the printks to avoid confusion with Intel C1E ] Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23x86: prevent C-states hang on AMD C1E enabled machinesThomas Gleixner
Impact: System hang when AMD C1E machines switch into C2/C3 AMD C1E enabled systems do not work with normal ACPI C-states even if the BIOS is advertising them. Limit the C-states to C1 for the ACPI processor idle code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23x86: prevent stale state of c1e_mask across CPU offline/onlineThomas Gleixner
Impact: hang which happens across CPU offline/online on AMD C1E systems. When a CPU goes offline then the corresponding bit in the broadcast mask is cleared. For AMD C1E enabled CPUs we do not reenable the broadcast when the CPU comes online again as we do not clear the corresponding bit in the c1e_mask, which keeps track which CPUs have been switched to broadcast already. So on those !$@#& machines we never switch back to broadcasting after a CPU offline/online cycle. Clear the bit when the CPU plays dead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-23x86: fix 27-rc crash on vsmp due to paravirt during module loadRavikiran G Thirumalai
27-rc fails to boot up if configured to use modules. Turns out vsmp_patch was marked __init, and vsmp_patch being the pvops 'patch' routine for vsmp, a call to vsmp_patch just turns out to execute a code page with series of 0xcc (POISON_FREE_INITMEM -- int3). vsmp_patch has been marked with __init ever since pvops, however, apply_paravirt can be called during module load causing calls to freed memory location. Since apply_paravirt can only be called during init/module load, make vsmp_patch with "__init_or_module" Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-22x86, oprofile: BUG scheduling while atomicAndrea Righi
nmi_shutdown() calls unregister_die_notifier() from an atomic context after setting preempt_disable() via get_cpu_var(): [ 1049.404154] BUG: scheduling while atomic: oprofiled/7796/0x00000002 [ 1049.404171] INFO: lockdep is turned off. [ 1049.404176] Modules linked in: oprofile af_packet rfcomm l2cap kvm_intel kvm i915 drm acpi_cpufreq cpufreq_userspace cpufreq_conservative cpufreq_ondemand cpufreq_powersave freq_table container sbs sbshc dm_mod arc4 ecb cryptomgr aead snd_hda_intel crypto_blkcipher snd_pcm_oss crypto_algapi snd_pcm iwlagn iwlcore snd_timer iTCO_wdt led_class btusb iTCO_vendor_support snd psmouse bluetooth mac80211 soundcore cfg80211 snd_page_alloc intel_agp video output button battery ac dcdbas evdev ext3 jbd mbcache sg sd_mod piix ata_piix libata scsi_mod dock tg3 libphy ehci_hcd uhci_hcd usbcore thermal processor fan fuse [ 1049.404362] Pid: 7796, comm: oprofiled Not tainted 2.6.27-rc5-mm1 #30 [ 1049.404368] Call Trace: [ 1049.404384] [<ffffffff804769fd>] thread_return+0x4a0/0x7d3 [ 1049.404396] [<ffffffff8026ad92>] generic_exec_single+0x52/0xe0 [ 1049.404405] [<ffffffff8026ae1a>] generic_exec_single+0xda/0xe0 [ 1049.404414] [<ffffffff8026aee3>] smp_call_function_single+0x73/0x150 [ 1049.404423] [<ffffffff804770c5>] schedule_timeout+0x95/0xd0 [ 1049.404430] [<ffffffff80476083>] wait_for_common+0x43/0x180 [ 1049.404438] [<ffffffff80476154>] wait_for_common+0x114/0x180 [ 1049.404448] [<ffffffff80236980>] default_wake_function+0x0/0x10 [ 1049.404457] [<ffffffff8024f810>] synchronize_rcu+0x30/0x40 [ 1049.404463] [<ffffffff8024f890>] wakeme_after_rcu+0x0/0x10 [ 1049.404472] [<ffffffff80479ca0>] _spin_unlock_irqrestore+0x40/0x80 [ 1049.404482] [<ffffffff80256def>] atomic_notifier_chain_unregister+0x3f/0x60 [ 1049.404501] [<ffffffffa03d8801>] nmi_shutdown+0x51/0x90 [oprofile] [ 1049.404517] [<ffffffffa03d6134>] oprofile_shutdown+0x34/0x70 [oprofile] [ 1049.404532] [<ffffffffa03d721e>] event_buffer_release+0xe/0x40 [oprofile] [ 1049.404543] [<ffffffff802bdcdd>] __fput+0xcd/0x240 [ 1049.404551] [<ffffffff802baa74>] filp_close+0x54/0x90 [ 1049.404560] [<ffffffff8023e1d1>] put_files_struct+0xb1/0xd0 [ 1049.404568] [<ffffffff8023f82f>] do_exit+0x18f/0x930 [ 1049.404576] [<ffffffff8020be03>] restore_args+0x0/0x30 [ 1049.404584] [<ffffffff80240006>] do_group_exit+0x36/0xa0 [ 1049.404592] [<ffffffff8020b7cb>] system_call_fastpath+0x16/0x1b This can be easily triggered with 'opcontrol --shutdown'. Simply move get_cpu_var() above unregister_die_notifier(). Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Acked-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: completely disable NOPL on 32 bits x86/paravirt: Remove duplicate paravirt_pagetable_setup_{start, done}() xen: fix for xen guest with mem > 3.7G x86: fix possible x86_64 and EFI regression arch/x86/kernel/kdebugfs.c: introduce missing kfree
2008-09-18AMD IOMMU: protect completion wait loop with iommu lockJoerg Roedel
The unlocked polling of the ComWaitInt bit in the IOMMU completion wait path is racy. Protect it with the iommu lock. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-18AMD IOMMU: set iommu sunc flag after command queuingJoerg Roedel
The iommu->need_sync flag must be set after the command is queued to avoid race conditions. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-16x86: completely disable NOPL on 32 bitsH. Peter Anvin
Completely disable NOPL on 32 bits. It turns out that Microsoft Virtual PC is so broken it can't even reliably *fail* in the presence of NOPL. This leaves the infrastructure in place but disables it unconditionally. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-14x86/paravirt: Remove duplicate paravirt_pagetable_setup_{start, done}()Alex Nixon
They were already called once in arch/x86/kernel/setup.c - we don't need to call them again. fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11485 Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-14xen: fix for xen guest with mem > 3.7GJeremy Fitzhardinge
PFN_PHYS() can truncate large addresses unless its passed a suitable large type. This is fixed more generally in the patch series introducing phys_addr_t, but we need a short-term fix to solve a Xen regression reported by Roberto De Ioris. Reported-by: Roberto De Ioris <roberto@unbit.it> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-12x86: fix possible x86_64 and EFI regressionJeremy Fitzhardinge
Russ Anderson reported a boot crash with EFI and latest mainline: BIOS-e820: 00000000fffa0000 - 00000000fffac000 (reserved) Pid: 0, comm: swapper Not tainted 2.6.27-rc5-00100-gec0c15a-dirty #5 Call Trace: [<ffffffff80849195>] early_idt_handler+0x55/0x69 [<ffffffff80313e52>] __memcpy+0x12/0xa4 [<ffffffff80859015>] efi_init+0xce/0x932 [<ffffffff80869c83>] setup_early_serial8250_console+0x2d/0x36a [<ffffffff80238688>] __insert_resource+0x18/0xc8 [<ffffffff8084f6de>] setup_arch+0x3a7/0x632 [<ffffffff808499ed>] start_kernel+0x91/0x367 [<ffffffff80849393>] x86_64_start_kernel+0xe3/0xe7 [<ffffffff808492b0>] x86_64_start_kernel+0x0/0xe7 RIP 0x10 Such a crash is possible if the CPU in this system is a 64-bit processor which doesn't support NX (ie, old Intel P4 -based64-bit processors). Certainly, if we support such processors, then we should start with _PAGE_NX initially clear in __supported_pte_flags, and then set it once we've established that the processor does indeed support NX. That will prevent early_ioremap - or anything else - from trying to set it. The simple fix is to simply call check_efer() earlier. Reported-by: Russ Anderson <rja@sgi.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-11KVM: VMX: Always return old for clear_flush_young() when using EPTSheng Yang
As well as discard fake accessed bit and dirty bit of EPT. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-09-11KVM: SVM: fix guest global tlb flushes with NPTJoerg Roedel
Accesses to CR4 are intercepted even with Nested Paging enabled. But the code does not check if the guest wants to do a global TLB flush. So this flush gets lost. This patch adds the check and the flush to svm_set_cr4. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-09-11KVM: SVM: fix random segfaults with NPT enabledJoerg Roedel
This patch introduces a guest TLB flush on every NPF exit in KVM. This fixes random segfaults and #UD exceptions in the guest seen under some workloads (e.g. long running compile workloads or tbench). A kernbench run with and without that fix showed that it has a slowdown lower than 0.5% Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-09-10arch/x86/kernel/kdebugfs.c: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. Note that at the point of the change, node has not yet been stored in d, so it is not affected by the existing cleanup code. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-09Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix memmap=exactmap boot argument x86: disable static NOPLs on 32 bits xen: fix 2.6.27-rc5 xen balloon driver warnings
2008-09-09x86: fix memmap=exactmap boot argumentPrarit Bhargava
When using kdump modifying the e820 map is yielding strange results. For example starting with BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 0000000000093400 (usable) BIOS-e820: 0000000000093400 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) BIOS-e820: 000000003fee0000 - 000000003fef3000 (ACPI data) BIOS-e820: 000000003fef3000 - 000000003ff80000 (ACPI NVS) BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) and booting with args memmap=exactmap memmap=640K@0K memmap=5228K@16384K memmap=125188K@22252K memmap=76K#1047424K memmap=564K#1047500K resulted in: user-defined physical RAM map: user: 0000000000000000 - 0000000000093400 (usable) user: 0000000000093400 - 00000000000a0000 (reserved) user: 0000000000100000 - 000000003fee0000 (usable) user: 000000003fee0000 - 000000003fef3000 (ACPI data) user: 000000003fef3000 - 000000003ff80000 (ACPI NVS) user: 000000003ff80000 - 0000000040000000 (reserved) user: 00000000e0000000 - 00000000f0000000 (reserved) user: 00000000fec00000 - 00000000fec10000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ff000000 - 0000000100000000 (reserved) But should have resulted in: user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 0000000001000000 - 000000000151b000 (usable) user: 00000000015bb000 - 0000000008ffc000 (usable) user: 000000003fee0000 - 000000003ff80000 (ACPI data) This is happening because of an improper usage of strcmp() in the e820 parsing code. The strcmp() always returns !0 and never resets the value for e820.nr_map and returns an incorrect user-defined map. This patch fixes the problem. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-08x86: disable static NOPLs on 32 bitsLinus Torvalds
On 32-bit, at least the generic nops are fairly reasonable, but the default nops for 64-bit really look pretty sad, and the P6 nops really do look better. So I would suggest perhaps moving the static P6 nop selection into the CONFIG_X86_64 thing. The alternative is to just get rid of that static nop selection, and just have two cases: 32-bit and 64-bit, and just pick obviously safe cases for them. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-06Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_init(): fix memory leak when using CPU hotplug x86: pda_init(): fix memory leak when using CPU hotplug x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flags x86: move mtrr cpu cap setting early in early_init_xxxx x86: delay early cpu initialization until cpuid is done x86: use X86_FEATURE_NOPL in alternatives x86: add NOPL as a synthetic CPU feature bit x86: boot: stub out unimplemented CPU feature words
2008-09-06Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource, acpi_pm.c: check for monotonicity clocksource, acpi_pm.c: use proper read function also in errata mode ntp: fix calculation of the next jiffie to trigger RTC sync x86: HPET: read back compare register before reading counter x86: HPET fix moronic 32/64bit thinko clockevents: broadcast fixup possible waiters HPET: make minimum reprogramming delta useful clockevents: prevent endless loop lockup clockevents: prevent multiple init/shutdown clockevents: enforce reprogram in oneshot setup clockevents: prevent endless loop in periodic broadcast handler clockevents: prevent clockevent event_handler ending up handler_noop
2008-09-06x86: cpu_init(): fix memory leak when using CPU hotplugAndreas Herrmann
Exception stacks are allocated each time a CPU is set online. But the allocated space is never freed. Thus with one CPU hotplug offline/online cycle there is a memory leak of 24K (6 pages) for a CPU. Fix is to allocate exception stacks only once -- when the CPU is set online for the first time. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: pda_init(): fix memory leak when using CPU hotplugAndreas Herrmann
pda->irqstackptr is allocated whenever a CPU is set online. But it is never freed. This results in a memory leak of 16K for each CPU offline/online cycle. Fix is to allocate pda->irqstackptr only once. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: akpm@linux-foundation.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flagsEduardo Habkost
Using native_pte_val triggers the BUG_ON() in the paravirt_ops version of pte_flags(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: move mtrr cpu cap setting early in early_init_xxxxYinghai Lu
Krzysztof Helt found MTRR is not detected on k6-2 root cause: we moved mtrr_bp_init() early for mtrr trimming, and in early_detect we only read the CPU capability from cpuid, so some cpu doesn't have that bit in cpuid. So we need to add early_init_xxxx to preset those bit before mtrr_bp_init for those earlier cpus. this patch is for v2.6.27 Reported-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: delay early cpu initialization until cpuid is doneKrzysztof Helt
Move early cpu initialization after cpu early get cap so the early cpu initialization can fix up cpu caps. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06x86: HPET: read back compare register before reading counterThomas Gleixner
After fixing the u32 thinko I sill had occasional hickups on ATI chipsets with small deltas. There seems to be a delay between writing the compare register and the transffer to the internal register which triggers the interrupt. Reading back the value makes sure, that it hit the internal match register befor we compare against the counter value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-06x86: HPET fix moronic 32/64bit thinkoThomas Gleixner
We use the HPET only in 32bit mode because: 1) some HPETs are 32bit only 2) on i386 there is no way to read/write the HPET atomic 64bit wide The HPET code unification done by the "moron of the year" did not take into account that unsigned long is different on 32 and 64 bit. This thinko results in a possible endless loop in the clockevents code, when the return comparison fails due to the 64bit/332bit unawareness. unsigned long cnt = (u32) hpet_read() + delta can wrap over 32bit. but the final compare will fail and return -ETIME causing endless loops. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-09-05x86: use X86_FEATURE_NOPL in alternativesH. Peter Anvin
Use X86_FEATURE_NOPL to determine if it is safe to use P6 NOPs in alternatives. Also, replace table and loop with simple if statement. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-05x86: add NOPL as a synthetic CPU feature bitH. Peter Anvin
The long noops ("NOPL") are supposed to be detected by family >= 6. Unfortunately, several non-Intel x86 implementations, both hardware and software, don't obey this dictum. Instead, probe for NOPL directly by executing a NOPL instruction and see if we get #UD. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-09-05x86: boot: stub out unimplemented CPU feature wordsH. Peter Anvin
The CPU feature detection code in the boot code is somewhat minimal, and doesn't include all possible CPUID words. In particular, it doesn't contain the code for CPU feature words 2 (Transmeta), 3 (Linux-specific), 5 (VIA), or 7 (scattered). Zero them out, so we can still set those bits as known at compile time; in particular, this allows creating a Linux-specific NOPL flag and have it required (and therefore resolvable at compile time) in 64-bit mode. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 06:48:51 +0000