summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)Author
2011-10-19x86, microcode: Correct microcode revision formatBorislav Petkov
506ed6b53e00 ("x86, intel: Output microcode revision in /proc/cpuinfo") added microcode revision format to /proc/cpuinfo and the MCE handler in decimal format but both AMD and Intel patch levels are handled as hex numbers. Fix it. Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-10-18x86, perf, kprobes: Make kprobes's twobyte_is_boostable volatileJosh Stone
When compiling an i386_defconfig kernel with gcc-4.6.1-9.fc15.i686, I noticed a warning about the asm operand for test_bit in kprobes' can_boost. I discovered that this caused only the first long of twobyte_is_boostable[] to be output. Jakub filed and fixed gcc PR50571 to correct the warning and this output issue. But to solve it for less current gcc, we can make kprobes' twobyte_is_boostable[] volatile, and it won't be optimized out. Before: CC arch/x86/kernel/kprobes.o In file included from include/linux/bitops.h:22:0, from include/linux/kernel.h:17, from [...]/arch/x86/include/asm/percpu.h:44, from [...]/arch/x86/include/asm/current.h:5, from [...]/arch/x86/include/asm/processor.h:15, from [...]/arch/x86/include/asm/atomic.h:6, from include/linux/atomic.h:4, from include/linux/mutex.h:18, from include/linux/notifier.h:13, from include/linux/kprobes.h:34, from arch/x86/kernel/kprobes.c:43: [...]/arch/x86/include/asm/bitops.h: In function ‘can_boost.part.1’: [...]/arch/x86/include/asm/bitops.h:319:2: warning: use of memory input without lvalue in asm operand 1 is deprecated [enabled by default] $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt 551: 0f a3 05 00 00 00 00 bt %eax,0x0 554: R_386_32 .rodata.cst4 $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o arch/x86/kernel/kprobes.o: file format elf32-i386 Contents of section .data: 0000 48000000 00000000 00000000 00000000 H............... Contents of section .rodata.cst4: 0000 4c030000 L... Only a single long of twobyte_is_boostable[] is in the object file. After, with volatile: $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt 551: 0f a3 05 20 00 00 00 bt %eax,0x20 554: R_386_32 .data $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o arch/x86/kernel/kprobes.o: file format elf32-i386 Contents of section .data: 0000 48000000 00000000 00000000 00000000 H............... 0010 00000000 00000000 00000000 00000000 ................ 0020 4c030000 0f000200 ffff0000 ffcff0c0 L............... 0030 0000ffff 3bbbfff8 03ff2ebb 26bb2e77 ....;.......&..w Now all 32 bytes are output into .data instead. Signed-off-by: Josh Stone <jistone@redhat.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jakub Jelinek <jakub@redhat.com> Link: http://lkml.kernel.org/r/1318899645-4068-1-git-send-email-jistone@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-14x86: constify PCI raw ops structuresJan Beulich
As with any other such change, the goal is to prevent inadvertent writes to these structures (assuming DEBUG_RODATA is enabled), and to separate data (possibly frequently) written to from such never getting modified. Reviewed-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14x86, intel: Use c->microcode for Atom errata checkAndi Kleen
Now that the cpu update level is available the Atom PSE errata check can use it directly without reading the MSR again. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1318466795-7393-2-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-14x86, intel: Output microcode revision in /proc/cpuinfoAndi Kleen
I got a request to make it easier to determine the microcode update level on Intel CPUs. This patch adds a new "microcode" field to /proc/cpuinfo. The microcode level is also outputed on fatal machine checks together with the other CPUID model information. I removed the respective code from the microcode update driver, it just reads the field from cpu_data. Also when the microcode is updated it fills in the new values too. I had to add a memory barrier to native_cpuid to prevent it being optimized away when the result is not used. This turns out to clean up further code which already got this information manually. This is done in followon patches. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1318466795-7393-1-git-send-email-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-14Merge branch 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tipLinus Torvalds
* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86: Default to vsyscall=native for now
2011-10-14x86, mrst: use a temporary variable for SFI irqMika Westerberg
SFI tables reside in RAM and should not be modified once they are written. Current code went to set pentry->irq to zero which causes subsequent reads to fail with invalid SFI table checksum. This will break kexec as the second kernel fails to validate SFI tables. To fix this we use temporary variable for irq number. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-13x86, microcode: Don't request microcode from userspace unnecessarilySrivatsa S. Bhat
Requesting the microcode from userspace *every time* when onlining CPUs (during a CPU hotplug operation) is unnecessary. Thus, ensure that once the kernel gets the microcode after booting, it is not freed nor invalidated when a CPU goes offline, so that it can be reused when that CPU comes back online, without requesting userspace for it again. As a result, the CPU hotplug operations become faster as well. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com> Link: http://lkml.kernel.org/r/4E91F908.5010006@linux.vnet.ibm.com Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-10-13x86/irq: Standardize on CONFIG_SPARSE_IRQ=yYinghai Lu
Sparseirq got introduced in v2.6.28 and Thomas did a huge cleanup around v2.6.38 that eliminated basically all disadvantages of it. So we can remove non-sparseirq support now and simplify our IRQ degrees of freedom a bit. Suggested-and-acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/4E95E21D.6090200@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12Merge branch 'tip/perf/core' of git://github.com/rostedt/linux into perf/coreIngo Molnar
2011-10-12x86, ioapic: Clean up ioapic/apic_id usageYinghai Lu
While looking at the code, apic_id sometime is referred to index of ioapic, but sometime is used for phys apic id. and some even use apic for real apic id. It is very confusing. So try to limit apic_id or ioapic_id to be real apic id for ioapic, and use ioapic_idx for ioapic index in the array. -v2: Suggested by Ingo, use ioapic_idx consistently, instead of ioapic Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542DC.3090509@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Factor out print_IO_APIC() to only print one io apicYinghai Lu
It is getting too big after the interrupt remaping entries debug print out was added. Original print_IO_APIC() becomes print_IO_APICs(). New print_IO_APIC() will only print one ioapic's registers As a side-effect this clean-up also made checkpatch.pl happier. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542D3.5000008@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Print out irte with right ioapic indexYinghai Lu
While checking irte dump in dmesg, the print out is confusing ioapic index with real io apic id: IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:00FF SQ:0 SVT:1) IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001 SID:00FF SQ:0 SVT:1) The system's first ioapic id is 1. This commit: | commit 3040db92ee1b6c5b6b6d73f8cdcad54c0da11563 | Author: Naga Chumbalkar <nagananda.chumbalkar@hp.com> | Date: Tue Jul 12 21:17:41 2011 +0000 | | x86, ioapic: Print IRTE when IR is enabled Confused apic_id with the ioapic ID - fix it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542C8.8040209@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Split up setup_ioapic_entry()Yinghai Lu
Ingo pointed out that setup_ioapic_entry() is way too big now. Split the intr-remap code out into setup_ir_ioapic_entry(). Also pass struct io_apic_irq_attr * instead of 5 parameters in those two functions. At last in setup_ir_ioapic_entry() we don't need to panic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542BB.4070807@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq()Yinghai Lu
Do not expand that struct, and just pass pointer to reduce the number of parameters in related functions. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542B1.7050800@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-11x86: Default to vsyscall=native for nowAdrian Bunk
This UML breakage: linux-2.6.30.1[3800] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb9c498 ax:ffffffffff600000 si:0 di:606790 linux-2.6.30.1[3856] vsyscall fault (exploit attempt?) ip:ffffffffff600000 cs:33 sp:7fbfb13168 ax:ffffffffff600000 si:0 di:606790 Is caused by commit 3ae36655 ("x86-64: Rework vsyscall emulation and add vsyscall= parameter") - the vsyscall emulation code is not fully cooked yet as UML relies on some rather fragile SIGSEGV semantics. Linus suggested in https://lkml.org/lkml/2011/8/9/376 to default to vsyscall=native for now, this patch implements that. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Andrew Lutomirski <luto@mit.edu> Cc: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/20111005214047.GE14406@localhost.pp.htv.fi Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86: Fix insn decoder for longer instructionMasami Hiramatsu
Fix x86 insn decoder for hardening against invalid length instructions. This adds length checkings for each byte-read site and if it exceeds MAX_INSN_SIZE, returns immediately. This can happen when decoding user-space binary. Caller can check whether it happened by checking insn.*.got member is set or not. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Stephane Eranian <eranian@google.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: acme@redhat.com Cc: ming.m.lin@intel.com Cc: robert.richter@amd.com Cc: ravitillo@lbl.gov Cc: yrl.pp-manager.tt@hitachi.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20111007133155.10933.58577.stgit@localhost.localdomain Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi, drivers: Fix nmi splitup build bugIngo Molnar
nmi.c needs an #include <linux/mca.h>: arch/x86/kernel/nmi.c: In function ‘unknown_nmi_error’: arch/x86/kernel/nmi.c:286:6: error: ‘MCA_bus’ undeclared (first use in this function) arch/x86/kernel/nmi.c:286:6: note: each undeclared identifier is reported only once for each function it appears in Another one is the hpwdt driver: drivers/watchdog/hpwdt.c:507:9: error: ‘NMI_DONE’ undeclared (first use in this function) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10perf, x86: Implement IBS initializationRobert Richter
This patch implements IBS feature detection and initialzation. The code is shared between perf and oprofile. If IBS is available on the system for perf, a pmu is setup. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1316597423-25723-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10perf, x86: Share IBS macros between perf and oprofileRobert Richter
Moving IBS macros from oprofile to <asm/perf_event.h> to make it available to perf. No additional changes. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1316597423-25723-2-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Track NMI usage statsDon Zickus
Now that the NMI handler are broken into lists, increment the appropriate stats for each list. This allows us to see what is going on when they get printed out in the next patch. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1317409584-23662-6-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Add in logic to handle multiple events and unknown NMIsDon Zickus
Previous patches allow the NMI subsystem to process multipe NMI events in one NMI. As previously discussed this can cause issues when an event triggered another NMI but is processed in the current NMI. This causes the next NMI to go unprocessed and become an 'unknown' NMI. To handle this, we first have to flag whether or not the NMI handler handled more than one event or not. If it did, then there exists a chance that the next NMI might be already processed. Once the NMI is flagged as a candidate to be swallowed, we next look for a back-to-back NMI condition. This is determined by looking at the %rip from pt_regs. If it is the same as the previous NMI, it is assumed the cpu did not have a chance to jump back into a non-NMI context and execute code and instead handled another NMI. If both of those conditions are true then we will swallow any unknown NMI. There still exists a chance that we accidentally swallow a real unknown NMI, but for now things seem better. An optimization has also been added to the nmi notifier rountine. Because x86 can latch up to one NMI while currently processing an NMI, we don't have to worry about executing _all_ the handlers in a standalone NMI. The idea is if multiple NMIs come in, the second NMI will represent them. For those back-to-back NMI cases, we have the potentail to drop NMIs. Therefore only execute all the handlers in the second half of a detected back-to-back NMI. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1317409584-23662-5-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Wire up NMI handlers to new routinesDon Zickus
Just convert all the files that have an nmi handler to the new routines. Most of it is straight forward conversion. A couple of places needed some tweaking like kgdb which separates the debug notifier from the nmi handler and mce removes a call to notify_die. [Thanks to Ying for finding out the history behind that mce call https://lkml.org/lkml/2010/5/27/114 And Boris responding that he would like to remove that call because of it https://lkml.org/lkml/2011/9/21/163] The things that get converted are the registeration/unregistration routines and the nmi handler itself has its args changed along with code removal to check which list it is on (most are on one NMI list except for kgdb which has both an NMI routine and an NMI Unknown routine). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Corey Minyard <minyard@acm.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Corey Minyard <minyard@acm.org> Cc: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Create new NMI handler routinesDon Zickus
The NMI handlers used to rely on the notifier infrastructure. This worked great until we wanted to support handling multiple events better. One of the key ideas to the nmi handling is to process _all_ the handlers for each NMI. The reason behind this switch is because NMIs are edge triggered. If enough NMIs are triggered, then they could be lost because the cpu can only latch at most one NMI (besides the one currently being processed). In order to deal with this we have decided to process all the NMI handlers for each NMI. This allows the handlers to determine if they recieved an event or not (the ones that can not determine this will be left to fend for themselves on the unknown NMI list). As a result of this change it is now possible to have an extra NMI that was destined to be received for an already processed event. Because the event was processed in the previous NMI, this NMI gets dropped and becomes an 'unknown' NMI. This of course will cause printks that scare people. However, we prefer to have extra NMIs as opposed to losing NMIs and as such are have developed a basic mechanism to catch most of them. That will be a later patch. To accomplish this idea, I unhooked the nmi handlers from the notifier routines and created a new mechanism loosely based on doIRQ. The reason for this is the notifier routines have a couple of shortcomings. One we could't guarantee all future NMI handlers used NOTIFY_OK instead of NOTIFY_STOP. Second, we couldn't keep track of the number of events being handled in each routine (most only handle one, perf can handle more than one). Third, I wanted to eventually display which nmi handlers are registered in the system in /proc/interrupts to help see who is generating NMIs. The patch below just implements the new infrastructure but doesn't wire it up yet (that is the next patch). Its design is based on doIRQ structs and the atomic notifier routines. So the rcu stuff in the patch isn't entirely untested (as the notifier routines have soaked it) but it should be double checked in case I copied the code wrong. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1317409584-23662-3-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Split out nmi from traps.cDon Zickus
The nmi stuff is changing a lot and adding more functionality. Split it out from the traps.c file so it doesn't continue to pollute that file. This makes it easier to find and expand all the future nmi related work. No real functional changes here. Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1317409584-23662-2-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10perf, intel: Use GO/HO bits in perf-ctrGleb Natapov
Intel does not have guest/host-only bit in perf counters like AMD does. To support GO/HO bits KVM needs to switch EVENTSELn values (or PERF_GLOBAL_CTRL if available) at a guest entry. If a counter is configured to count only in a guest mode it stays disabled in a host, but VMX is configured to switch it to enabled value during guest entry. This patch adds GO/HO tracking to Intel perf code and provides interface for KVM to get a list of MSRs that need to be switched on a guest entry. Only cpus with architectural PMU (v1 or later) are supported with this patch. To my knowledge there is not p6 models with VMX but without architectural PMU and p4 with VMX are rare and the interface is general enough to support them if need arise. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1317816084-18026-7-git-send-email-gleb@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-06x86/PCI: use host bridge _CRS info on ASUS M2V-MX SEPaul Menzel
In summary, this DMI quirk uses the _CRS info by default for the ASUS M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN") whose commit message should be read for further information. Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res") Linux gives the following oops: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:20:01.0: setting latency timer to 64 BUG: unable to handle kernel paging request at ffffc90011c08000 IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173 Oops: 0009 [#1] SMP last sysfs file: /sys/module/snd_pcm/initstate CPU 0 Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan] Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name RIP: 0010:[<ffffffffa0578402>] [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP: 0018:ffff88013153fe50 EFLAGS: 00010286 RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090 FS: 0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0) Stack: 0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400 ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8 ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232 Call Trace: [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186 [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92 [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b [<ffffffff8105fd3f>] ? kthread+0x7a/0x82 [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10 [<ffffffff8105fcc5>] ? kthread+0x0/0x82 [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10 Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be RIP [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP <ffff88013153fe50> CR2: ffffc90011c08000 ---[ end trace 8d1f3ebc136437fd ]--- Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem. $ dmesg | grep -i crs # with the quirk PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug The match has to be against the DMI board entries though since the vendor entries are not populated. DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304 10/30/2007 This quirk should be removed when `pci=use_crs` is enabled for machines from 2006 or earlier or some other solution is implemented. Using coreboot [1] with this board the problem does not exist but this quirk also does not affect it either. To be safe though the check is tightened to only take effect when the BIOS from American Megatrends is used. 15:13 < ruik> but coreboot does not need that 15:13 < ruik> because i have there only one root bus 15:13 < ruik> the audio is behind a bridge $ sudo dmidecode BIOS Information Vendor: American Megatrends Inc. Version: 0304 Release Date: 10/30/2007 [1] http://www.coreboot.org/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552 Cc: stable@kernel.org (2.6.34) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-06perf, amd: Use GO/HO bits in perf-ctrJoerg Roedel
The AMD perf-counters support counting in guest or host-mode only. Make use of that feature when user-space specified guest/host-mode only counting. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1317816084-18026-3-git-send-email-gleb@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-06Merge branch 'ras' of git://amd64.org/linux/bp into perf/coreIngo Molnar
2011-10-06Merge commit 'v3.1-rc9' into perf/coreIngo Molnar
Merge reason: pick up latest fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-05KVM: emulate lapic tsc deadline timer for guestLiu, Jinsong
This patch emulate lapic tsc deadline timer for guest: Enumerate tsc deadline timer capability by CPUID; Enable tsc deadline timer mode by lapic MMIO; Start tsc deadline timer by WRMSR; [jan: use do_div()] [avi: fix for !irqchip_in_kernel()] [marcelo: another fix for !irqchip_in_kernel()] Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-01Merge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and ↵Linus Torvalds
'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip * 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: irq: Fix check for already initialized irq_domain in irq_domain_add irq: Add declaration of irq_domain_simple_ops to irqdomain.h * 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: x86/rtc: Don't recursively acquire rtc_lock * 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip: posix-cpu-timers: Cure SMP wobbles sched: Fix up wchan borkage sched/rt: Migrate equal priority tasks to available CPUs
2011-09-29xen: use generic functions instead of xen_{alloc, free}_vm_area()David Vrabel
Replace calls to the Xen-specific xen_alloc_vm_area() and xen_free_vm_area() functions with the generic equivalent (alloc_vm_area() and free_vm_area()). On x86, these were identical already. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29Merge branch 'core' of git://amd64.org/linux/rric into perf/coreIngo Molnar
2011-09-29xen: release all pages within 1-1 p2m mappingsDavid Vrabel
In xen_memory_setup() all reserved regions and gaps are set to an identity (1-1) p2m mapping. If an available page has a PFN within one of these 1-1 mappings it will become inaccessible (as it MFN is lost) so release them before setting up the mapping. This can make an additional 256 MiB or more of RAM available (depending on the size of the reserved regions in the memory map) if the initial pages overlap with reserved regions. The 1:1 p2m mappings are also extended to cover partial pages. This fixes an issue with (for example) systems with a BIOS that puts the DMI tables in a reserved region that begins on a non-page boundary. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29xen: allow extra memory to be in multiple regionsDavid Vrabel
Allow the extra memory (used by the balloon driver) to be in multiple regions (typically two regions, one for low memory and one for high memory). This allows the balloon driver to increase the number of available low pages (if the initial number if pages is small). As a side effect, the algorithm for building the e820 memory map is simpler and more obviously correct as the map supplied by the hypervisor is (almost) used as is (in particular, all reserved regions and gaps are preserved). Only RAM regions are altered and RAM regions above max_pfn + extra_pages are marked as unused (the region is split in two if necessary). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29xen: allow balloon driver to use more than one memory regionDavid Vrabel
Allow the xen balloon driver to populate its list of extra pages from more than one region of memory. This will allow platforms to provide (for example) a region of low memory and a region of high memory. The maximum possible number of extra regions is 128 (== E820MAX) which is quite large so xen_extra_mem is placed in __initdata. This is safe as both xen_memory_setup() and balloon_init() are in __init. The balloon regions themselves are not altered (i.e., there is still only the one region). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29xen/balloon: account for pages released during memory setupDavid Vrabel
In xen_memory_setup() pages that occur in gaps in the memory map are released back to Xen. This reduces the domain's current page count in the hypervisor. The Xen balloon driver does not correctly decrease its initial current_pages count to reflect this. If 'delta' pages are released and the target is adjusted the resulting reservation is always 'delta' less than the requested target. This affects dom0 if the initial allocation of pages overlaps the PCI memory region but won't affect most domU guests that have been setup with pseudo-physical memory maps that don't have gaps. Fix this by accouting for the released pages when starting the balloon driver. If the domain's targets are managed by xapi, the domain may eventually run out of memory and die because xapi currently gets its target calculations wrong and whenever it is restarted it always reduces the target by 'delta'. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29xen: XEN_PVHVM depends on PCIStefano Stabellini
Xen PV on HVM guests require PCI support because they need the xen-platform-pci driver in order to initialize xenbus. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29xen: modify kernel mappings corresponding to granted pagesStefano Stabellini
If we want to use granted pages for AIO, changing the mappings of a user vma and the corresponding p2m is not enough, we also need to update the kernel mappings accordingly. Currently this is only needed for pages that are created for user usages through /dev/xen/gntdev. As in, pages that have been in use by the kernel and use the P2M will not need this special mapping. However there are no guarantees that in the future the kernel won't start accessing pages through the 1:1 even for internal usage. In order to avoid the complexity of dealing with highmem, we allocated the pages lowmem. We issue a HYPERVISOR_grant_table_op right away in m2p_add_override and we remove the mappings using another HYPERVISOR_grant_table_op in m2p_remove_override. Considering that m2p_add_override and m2p_remove_override are called once per page we use multicalls and hypercall batching. Use the kmap_op pointer directly as argument to do the mapping as it is guaranteed to be present up until the unmapping is done. Before issuing any unmapping multicalls, we need to make sure that the mapping has already being done, because we need the kmap->handle to be set correctly. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> [v1: Removed GRANT_FRAME_BIT usage] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-28x86-64: Fix CFI data for interrupt framesJan Beulich
The patch titled "x86: Don't use frame pointer to save old stack on irq entry" did not properly adjust CFI directives, so this patch is a follow-up to that one. With the old stack pointer no longer stored in a callee-saved register (plus some offset), we now have to use a CFA expression to describe the memory location where it is being found. This requires the use of .cfi_escape (allowing arbitrary byte streams to be emitted into .eh_frame), as there is no .cfi_def_cfa_expression (which also cannot reasonably be expected, as it would require a full expression parser). Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/4E8360200200007800058467@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-28x86-64: Don't apply destructive erratum workaround on unaffected CPUsJan Beulich
Erratum 93 applies to AMD K8 CPUs only, and its workaround (forcing the upper 32 bits of %rip to all get set under certain conditions) is actually getting in the way of analyzing page faults occurring during EFI physical mode runtime calls (in particular the page table walk shown is completely unrelated to the actual fault). This is because typically EFI runtime code lives in the space between 2G and 4G, which - modulo the above manipulation - is likely to overlap with the kernel or modules area. While even for the other errata workarounds their taking effect could be limited to just the affected CPUs, none of them appears to be destructive, and they're generally getting called only outside of performance critical paths, so they're being left untouched. Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/4E835FE30200007800058464@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-28apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatchesJan Beulich
These warnings (generally one per CPU) are a result of initializing x86_cpu_to_logical_apicid while apic_default is still in use, but the check in setup_local_APIC() being done when apic_bigsmp was already used as an override in default_setup_apic_routing(): Overriding APIC driver with bigsmp Enabling APIC mode: Physflat. Using 5 I/O APICs ------------[ cut here ]------------ WARNING: at .../arch/x86/kernel/apic/apic.c:1239 ... CPU 1 irqstacks, hard=f1c9a000 soft=f1c9c000 Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 9e000 Initializing CPU#1 ------------[ cut here ]------------ WARNING: at .../arch/x86/kernel/apic/apic.c:1239 setup_local_APIC+0x137/0x46b() Hardware name: ... CPU1 logical APIC ID: 2 != 8 ... Fix this (for the time being, i.e. until x86_32_early_logical_apicid() will get removed again, as Tejun says ought to be possible) by overriding the previously stored values at the point where the APIC driver gets overridden. v2: Move this and the pre-existing override logic into arch/x86/kernel/apic/bigsmp_32.c. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@kernel.org> (2.6.39 and onwards) Link: http://lkml.kernel.org/r/4E835D16020000780005844C@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-28x86, amd: Include linux/elf.h since we use stuff from asm/elf.hStephen Rothwell
After merging the moduleh tree, today's linux-next build (x86_64 allmodconfig) failed like this: arch/x86/kernel/sys_x86_64.c:28:10: warning: 'enum align_flags' declared inside parameter list arch/x86/kernel/sys_x86_64.c:28:10: warning: its scope is only this definition or declaration, which is probably not what you want arch/x86/kernel/sys_x86_64.c:28:22: error: parameter 3 ('flags') has incomplete type [...] Presumably caused by the module.h split interacting with a new commit dfb09f9b7ab0 ("x86, amd: Avoid cache aliasing penalties on AMD family 15h") from the x8 tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/20110928174214.17a58be15d84d67c185930e1@canb.auug.org.au Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-28Merge branch 'upstream/ticketlock-cleanup' of ↵Ingo Molnar
git://github.com/jsgf/linux-xen into x86/spinlocks
2011-09-27x86, ticketlock: remove obsolete commentJeremy Fitzhardinge
The note about partial registers is not really relevent now that we rely on gcc to generate all the assembler. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-09-27x86: Perf_event_amd.c needs <asm/apicdef.h>Randy Dunlap
Fix (rare) build error by adding <asm/apicdef.h> header file: arch/x86/kernel/cpu/perf_event_amd.c:350:2: error: 'BAD_APICID' undeclared (first use in this function) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Robert Richter <robert.richter@amd.com> Cc: Andre Przywara <andre.przywara@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/4E820138.90301@xenotime.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-27doc: fix broken referencesPaul Bolle
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-26xen/dom0: set wallclock time in XenJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-09-26xen: add dom0_op hypercallJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 21:11:42 +0000