Age | Commit message (Collapse) | Author |
|
|
|
In the spirit of commit 29cf7a30f8a0 ("x86/PCI: use host bridge _CRS
info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by
default on a board that needs it.
This fixes boot failures and oopses introduced in 3e3da00c01d0
("x86/pci: AMD one chain system to use pci read out res"). The quirk
is quite targetted (to a specific board and BIOS version) for two
reasons:
(1) to emphasize that this method of tackling the problem one quirk
at a time is a little insane
(2) to give BIOS vendors an opportunity to use simpler tables and
allow us to return to generic behavior (whatever that happens to
be) with a later BIOS update
In other words, I am not at all happy with having quirks like this.
But it is even worse for the kernel not to work out of the box on
these machines, so...
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42619
Reported-by: Svante Signell <svante.signell@telia.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
We may need to convert the endianness of the data we read from/write
to 'buf', so let's use {get,put}_unaligned_le32() to do that. Failure
to do so can result in accessing invalid memory, leading to a
segfault. Stephen Rothwell noticed this bug while cross-building an
x86_64 allmodconfig kernel on PowerPC.
We need to read from and write to 'buf' a byte at a time otherwise
it's possible we'll perform an unaligned access, which can lead to bus
errors when cross-building an x86 kernel on risc architectures.
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Bowler <nbowler@elliptictech.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1330436245-24875-6-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Currently tools/build has access to all the kernel headers in
$(srctree). This is unnecessary and could potentially allow
tools/build to erroneously include kernel headers when it should only
be including userspace-exported headers.
Unfortunately, mkcpustr still needs access to some of the asm kernel
headers, so explicitly special case that hostprog.
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1330436245-24875-5-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Use the new headers in tools/include instead of rolling our own
put_unaligned_le32() implementation.
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1330436245-24875-4-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Use the new headers in tools/include instead of rolling our own
put_unaligned_le32() implementation.
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1330436245-24875-3-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Fix:
arch/x86/Makefile:96: *** recipe commences before first target. Stop.
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/r/1329696488-16970-1-git-send-email-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into x86/asm
|
|
Sync up the latest NMI fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
If X32 is enabled in .config, but the binutils can't build it, issue a
warning and disable the feature rather than erroring out.
In order to support this, have CONFIG_X86_X32 be the option set in
Kconfig, and CONFIG_X86_X32_ABI be the option set by the Makefile when
it is enabled and binutils has been found to be functional.
Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/r/1329696488-16970-1-git-send-email-hpa@zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce/AMD: Fix UP build error
x86: Specify a size for the cmp in the NMI handler
x86/nmi: Test saved %cs in NMI to determine nested NMI case
x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processors
x86/microcode: Remove noisy AMD microcode warning
|
|
Commit eab9e6137f23 ("x86-64: Fix CFI data for interrupt frames")
introduced a DW_CFA_def_cfa_expression in the SAVE_ARGS_IRQ
macro. To later define the CFA using a simple register+offset
rule both register and offset need to be supplied. Just using
CFI_DEF_CFA_REGISTER leaves the offset undefined. So use
CFI_DEF_CFA with reg+off explicitly at the end of
common_interrupt.
Signed-off-by: Mark Wielaard <mjw@redhat.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/1330079527-30711-1-git-send-email-mjw@redhat.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
As of v2.6.38 this counter is being maintained without ever being
read.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4F4787930200007800074A10@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
After all, this code is being run once at boot only (if
configured in at all).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/4F478C010200007800074A3D@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Two fixes to fix a memory corruption bug when WC pages never get
converted back to WB but end up being recycled in the general memory
pool as WC.
There is a better way of fixing this, but there is not enough time to do
the full benchmarking to pick one of the right options - so picking the
one that favors stability for right now.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* tag 'stable/for-linus-fixes-3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pat: Disable PAT support for now.
xen/setup: Remove redundant filtering of PTE masks.
|
|
task->thread.usersp is unusable immediately after a binary is exec()'d
until it undergoes a context switch cycle. The start_thread() function
called during execve() saves the stack pointer into pt_regs and into
old_rsp, but fails to record it into task->thread.usersp.
Because of this, KSTK_ESP(task) returns an incorrect value for a
64-bit program until the task is switched out and back in since
switch_to swaps %rsp values in and out into task->thread.usersp.
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Link: http://lkml.kernel.org/r/1330273075-2949-1-git-send-email-siddhesh.poyarekar@gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Commits bb212724 and d1a797f3 both added a call to
clear_thread_flag(TIF_X32) under set_personality_64bit() - only one is
needed.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Link: http://lkml.kernel.org/r/1330228774-24223-1-git-send-email-bobbypowers@gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
If a process has a non-x32 ia32 personality and changes to x32, the
process would keep its TS_COMPAT flag. x32 uses the presence of the
x32 flag on a syscall to determine compat status, so make sure
TS_COMPAT is cleared.
Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Link: http://lkml.kernel.org/r/1330230338-25077-1-git-send-email-bobbypowers@gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
x86 has fast unaligned accesses, so twofish-x86_64/i586 does not need to enforce
alignment.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
x86 has fast unaligned accesses, so blowfish-x86_64 does not need to enforce
alignment.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Driver name in ablk_*_init functions can be constructed runtime. Therefore
use single function ablk_init to reduce object size.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Combine all crypto_alg to be registered and use new crypto_[un]register_algs
functions. Simplifies init/exit code and reduce object size.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Combine all crypto_alg to be registered and use new crypto_[un]register_algs
functions. Simplifies init/exit code and reduce object size.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Combine all crypto_alg to be registered and use new crypto_[un]register_algs
functions. Simplifies init/exit code and reduce object size.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
Some of the comments for the nesting NMI algorithm were stale and
had some references to some prototypes that were first tried.
I also updated the comments to be a little easier to understand
the flow of the code. It definitely needs the documentation.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
In one case, use an address register that was computed earlier (and
with a simpler instruction), thus reducing the risk of a stall.
In the second case, eliminate a branch by using a conditional move (as
is already done in call_softirq and xen_do_hypervisor_callback).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/4F4788A50200007800074A26@nat28.tlf.novell.com
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
The saving and restoring of %rdx wasn't annotated at all, and the
jumping over sections where state gets partly restored wasn't handled
either.
Further, by folding the pushing of the previous frame in repeat_nmi
into that which so far was immediately preceding restart_nmi (after
moving the restore of %rdx ahead of that, since it doesn't get used
anymore when pushing prior frames), annotations of the replicated
frame creations can be made consistent too.
v2: Fully fold repeat_nmi into the normal code flow (adding a single
redundant instruction to the "normal" code path), thus retaining
the special protection of all instructions between repeat_nmi and
end_repeat_nmi.
Link: http://lkml.kernel.org/r/4F478B630200007800074A31@nat28.tlf.novell.com
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/mce
Add symbolic defines for architectural MCACOD constants
|
|
static_key_slow_[inc|dec]()
So here's a boot tested patch on top of Jason's series that does
all the cleanups I talked about and turns jump labels into a
more intuitive to use facility. It should also address the
various misconceptions and confusions that surround jump labels.
Typical usage scenarios:
#include <linux/static_key.h>
struct static_key key = STATIC_KEY_INIT_TRUE;
if (static_key_false(&key))
do unlikely code
else
do likely code
Or:
if (static_key_true(&key))
do likely code
else
do unlikely code
The static key is modified via:
static_key_slow_inc(&key);
...
static_key_slow_dec(&key);
The 'slow' prefix makes it abundantly clear that this is an
expensive operation.
I've updated all in-kernel code to use this everywhere. Note
that I (intentionally) have not pushed through the rename
blindly through to the lowest levels: the actual jump-label
patching arch facility should be named like that, so we want to
decouple jump labels from the static-key facility a bit.
On non-jump-label enabled architectures static keys default to
likely()/unlikely() branches.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: a.p.zijlstra@chello.nl
Cc: mathieu.desnoyers@efficios.com
Cc: davem@davemloft.net
Cc: ddaney.cavm@gmail.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Traditionally the kernel has refused to setup EFI at all if there's been
a mismatch in 32/64-bit mode between EFI and the kernel.
On some platforms that boot natively through EFI (Chrome OS being one),
we still need to get at least some of the static data such as memory
configuration out of EFI. Runtime services aren't as critical, and
it's a significant amount of work to implement switching between the
operating modes to call between kernel and firmware for thise cases. So
I'm ignoring it for now.
v5:
* Fixed some printk strings based on feedback
* Renamed 32/64-bit specific types to not have _ prefix
* Fixed bug in printout of efi runtime disablement
v4:
* Some of the earlier cleanup was accidentally reverted by this patch, fixed.
* Reworded some messages to not have to line wrap printk strings
v3:
* Reorganized to a series of patches to make it easier to review, and
do some of the cleanups I had left out before.
v2:
* Added graceful error handling for 32-bit kernel that gets passed
EFI data above 4GB.
* Removed some warnings that were missed in first version.
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: http://lkml.kernel.org/r/1329081869-20779-6-git-send-email-olof@lixom.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
It's not perfect, but way better than before. Mark efi_enabled as false in
case of error and at least stop dereferencing pointers that are known to
be invalid.
The only significant missing piece is the lack of undoing the
memblock_reserve of the memory that efi marks as in use. On the other
hand, it's not a large amount of memory, and leaving it unavailable for
system use should be the safer choice anyway.
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: http://lkml.kernel.org/r/1329081869-20779-5-git-send-email-olof@lixom.net
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Trivial cleanup, move guid and table pointers to local copies to
make the code cleaner.
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: http://lkml.kernel.org/r/1329081869-20779-4-git-send-email-olof@lixom.net
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Alright, I guess I'll go through and convert them, even though
there's no net gain to speak of.
v4:
* Switched to pr_fmt and removed some redundant use of "EFI" in
messages.
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: http://lkml.kernel.org/r/1329081869-20779-3-git-send-email-olof@lixom.net
Cc: Joe Perches <joe@perches.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
Break out some of the init steps into helper functions.
Only change to execution flow is the removal of the warning when the
kernel memdesc structure differ in size from what firmware specifies
since it's a bogus warning (it's a valid difference per spec).
v4:
* Removed memdesc warning as per above
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: http://lkml.kernel.org/r/1329081869-20779-2-git-send-email-olof@lixom.net
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
This patch removes the x86-specific definition of irq_domain and replaces
it with the common implementation.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
The PCI fixups get executed based upon whether they are linked in. We need
to avoid executing them if we boot a dual SoC/PC type kernel on a PC class
system.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
ATOMISP on Medfield is a real PCI device which should be handled differently
than the fake PCI devices on south complex. PCI type 1 access is used for
accessing config space this also has other impact such as PM D3 delay. There
shouldn't be any need for reading base address from IUNIT via msg bus.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
Langwell devices are not true pci devices, they are not subject to the 10 ms
d3 to d0 delay required by pci spec. This patch assigns d3_delay to 0 for all
langwell pci devices.
We can also power off devices that are not really used by the OS
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
warning:
unreferenced object 0xffff8801f6914200 (size 512):
comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s)
hex dump (first 32 bytes):
00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00 ................
60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00 `X/.............
backtrace:
[<ffffffff81c2408c>] kmemleak_alloc+0x26/0x43
[<ffffffff8113764f>] __kmalloc+0x121/0x183
[<ffffffff81ca8d93>] get_current_resources+0x5a/0xc6
[<ffffffff81c5bedd>] pci_acpi_scan_root+0x13c/0x21c
[<ffffffff81c2a745>] acpi_pci_root_add+0x1e1/0x421
[<ffffffff81408f50>] acpi_device_probe+0x50/0x190
[<ffffffff8149edc7>] really_probe+0x99/0x126
[<ffffffff8149ef83>] driver_probe_device+0x3b/0x56
[<ffffffff8149effd>] __driver_attach+0x5f/0x82
[<ffffffff8149d860>] bus_for_each_dev+0x5c/0x88
[<ffffffff8149eb87>] driver_attach+0x1e/0x20
[<ffffffff8149e7cc>] bus_add_driver+0xca/0x21d
[<ffffffff8149f47b>] driver_register+0x91/0xfe
[<ffffffff81409d09>] acpi_bus_register_driver+0x43/0x45
[<ffffffff8278bdc9>] acpi_pci_root_init+0x20/0x28
[<ffffffff810001e7>] do_one_initcall+0x57/0x134
The system has _CRS for root buses, but they are not used because the machine
date is before the cutoff date for _CRS usage.
Try to free those unused resource arrays and names.
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
Drop the legacy weak symbols that don't carry the __vdso prefix from
the x32 VDSO. This is a new ABI and we don't need to support that
legacy; the actual libc will export the proper symbols.
Suggested-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/4F42E171.9080005@mit.edu
Cc: H. J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into gpio/next
|
|
Current kernel MCE code reads ERST at the first reading of /dev/mcelog
(maybe in starting mcelogd,) even if the system does not support ERST,
which results in a fake "no such device" message (as described in [1].)
This problem is not critical, but can confuse system admins.
This patch fixes it by filtering the return value from lower (ACPI) layer.
[1] http://thread.gmane.org/gmane.linux.kernel/1060250
Reported by: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Link: https://lkml.org/lkml/2012/1/23/299
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
When I previously fixed up the mce_device code, I used a static array of
the pointers. It was (rightfully) pointed out to me that I should be
using the per_cpu code instead.
This patch converts the code over to that structure, moving the variable
back into the per_cpu area, like it used to be for 3.2 and earlier.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Link: https://lkml.org/lkml/2012/1/27/165
Signed-off-by: Tony Luck <tony.luck@intel.com>
|
|
Printing the "start_ip" for every secondary cpu is very noisy on a large
system - and doesn't add any value. Drop this message.
Console log before:
Booting Node 0, Processors #1
smpboot cpu 1: start_ip = 96000
#2
smpboot cpu 2: start_ip = 96000
#3
smpboot cpu 3: start_ip = 96000
#4
smpboot cpu 4: start_ip = 96000
...
#31
smpboot cpu 31: start_ip = 96000
Brought up 32 CPUs
Console log after:
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
Booting Node 1, Processors #8 #9 #10 #11 #12 #13 #14 #15 Ok.
Booting Node 0, Processors #16 #17 #18 #19 #20 #21 #22 #23 Ok.
Booting Node 1, Processors #24 #25 #26 #27 #28 #29 #30 #31
Brought up 32 CPUs
Acked-by: Borislav Petkov <bp@amd64.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/4f452eb42507460426@agluck-desktop.sc.intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
|
141168c36cde ("x86: Simplify code by removing a !SMP #ifdefs
from 'struct cpuinfo_x86'") removed a bunch of CONFIG_SMP ifdefs
around code touching struct cpuinfo_x86 members but also caused
the following build error with Randy's randconfigs:
mce_amd.c:(.cpuinit.text+0x4723): undefined reference to `cpu_llc_shared_map'
Restore the #ifdef in threshold_create_bank() which creates
symlinks on the non-BSP CPUs.
There's a better patch series being worked on by Kevin Winchester
which will solve this in a cleaner fashion, but that series is
too ambitious for v3.3 merging - so we first queue up this trivial
fix and then do the rest for v3.4.
Signed-off-by: Borislav Petkov <bp@alien8.de>
Acked-by: Kevin Winchester <kjwinchester@gmail.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Nick Bowler <nbowler@elliptictech.com>
Link: http://lkml.kernel.org/r/20120203191801.GA2846@x1.osrc.amd.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
For each logical CPU that is coming online, we spend 20msec for
checking the TSC synchronization. And as this is done
sequentially for each logical CPU boot, this time gets added up
depending on the number of logical CPU's supported by the
platform.
Minimize this by using the socket topology information.
If the target CPU coming online doesn't have any of its
core-siblings online, a timeout of 20msec will be used for the
TSC-warp measurement loop. Otherwise a smaller timeout of 2msec
will be used, as we have some information about this socket
already (and this information grows as we have more and more
logical-siblings in that socket).
Ideally we should be able to skip the TSC sync check on the
other core-siblings, if the first logical CPU in a socket passed
the sync test. But as the TSC is per-logical CPU and can
potentially be modified wrongly by the bios before the OS boot,
TSC sync test for smaller duration should be able to catch such
errors. Also this will catch the condition where all the cores
in the socket doesn't get reset at the same time.
For example, with this modification, time spent in TSC sync
checks on a 4 socket 10-core with HT system gets reduced from
1580msec to 212msec.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jack Steiner <steiner@sgi.com>
Cc: venki@google.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1328581940.29790.20.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Add CPU features from the Intel Archicture Instruction Set Extensions
Programming Reference version 012A (Feb 2012), document number 319433-012A.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|