summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)Author
2012-01-06x86/PCI: read Broadcom CNB20LE host bridge info before PCI scanBjorn Helgaas
We currently read the CNB20LE aperture information in a PCI quirk, which happens after we've already created the root bus. This patch changes it to read the apertures earlier so we can create the root bus with the correct resources. I believe the CNB20LE lives at "pci 0000:00:00" based on https://lkml.org/lkml/2010/8/13/220 CC: Ira W. Snyder <iws@ovro.caltech.edu> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06x86/PCI: amd: Kill misleading message about enablement of IO access to PCI ECS]Andreas Herrmann
Commit 24d9b70b8c679264756a6980e668b96b3f964826 (x86: Use PCI method for enabling AMD extended config space before MSR method) added a message when IO access to PCI ECS was enabled via access to the NB_CFG PCI register. This can lead to a bogus message like [ 0.365177] Extended Config Space enabled on 0 nodes which is misleading because IO ECS access is subsequently enabled for AMD CPUs (that support this) by modifying the corresponding NB_CFG MSR. Furthermore it's not "Extended Config Space" that is enabled by this register setting. It's the IO access that is enabled for extended configruation space. IMHO the ambiguous message needs to be cancelled. Cc: Jan Beulich <jbeulich@novell.com> Cc: Robert Richter <robert.richter@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06PCI: x86: use generic pcibios_set_master()Myron Stowe
This patch removes x86's architecture-specific 'pcibios_set_master()' routine and lets the default PCI core based implementation handle PCI device 'latency timer' setup. No functional change. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06PCI: Pull PCI 'latency timer' setup up into the coreMyron Stowe
The 'latency timer' of PCI devices, both Type 0 and Type 1, is setup in architecture-specific code [see: 'pcibios_set_master()']. There are two approaches being taken by all the architectures - check if the 'latency timer' is currently set between 16 and 255 and if not bring it within bounds, or, do nothing (and then there is the gratuitously different PA-RISC implementation). There is nothing architecture-specific about PCI's 'latency timer' so this patch pulls its setup functionality up into the PCI core by creating a generic 'pcibios_set_master()' function using the '__weak' attribute which can be used by all architectures as a default which, if necessary, can then be over-ridden by architecture-specific code. No functional change. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06x86/PCI: Ignore CPU non-addressable _CRS reserved memory resourcesGary Hade
This assures that a _CRS reserved host bridge window or window region is not used if it is not addressable by the CPU. The new code either trims the window to exclude the non-addressable portion or totally ignores the window if the entire window is non-addressable. The current code has been shown to be problematic with 32-bit non-PAE kernels on systems where _CRS reserves resources above 4GB. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Renninger <trenn@novell.com> Cc: linux-kernel@vger.kernel.org Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06PCI: Add Thinkpad SL510 to pci=nocrs blacklistDave Jones
Enabling CRS by default breaks suspend on the Thinkpad SL510. Details in https://bugzilla.redhat.com/show_bug.cgi?id=769657 Reported-by: Stefan Kirrmann <stefan.kirrmann@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06PCI: Add Dell Studio 1557 to pci=nocrs blacklistDave Jones
The Dell Studio 1557 also doesn't suspend correctly when CRS is enabled. Details at https://bugzilla.redhat.com/show_bug.cgi?id=769657 Reported-by: Gregory S. Hoerner <ghoerner@transcendingthought.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06PCI: add set_nouse_crs for use by a pci=nocrs blacklistDave Jones
Some machines don't boot unless passed pci=nocrs. (See https://bugzilla.redhat.com/show_bug.cgi?id=770308 for details of one report. Waiting on dmidecode output for others). Currently there is a DMI whitelist, even though the default is on. v2: drop the 1536 blacklist entry, superceded by the PNP/MMCONFIG changes from Bjorn Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <sfr@canb.auug.org.au> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) sched/tracing: Add a new tracepoint for sleeptime sched: Disable scheduler warnings during oopses sched: Fix cgroup movement of waking process sched: Fix cgroup movement of newly created process sched: Fix cgroup movement of forking process sched: Remove cfs bandwidth period check in tg_set_cfs_period() sched: Fix load-balance lock-breaking sched: Replace all_pinned with a generic flags field sched: Only queue remote wakeups when crossing cache boundaries sched: Add missing rcu_dereference() around ->real_parent usage [S390] fix cputime overflow in uptime_proc_show [S390] cputime: add sparse checking and cleanup sched: Mark parent and real_parent as __rcu sched, nohz: Fix missing RCU read lock sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer sched, nohz: Fix the idle cpu check in nohz_idle_balance sched: Use jump_labels for sched_feat sched/accounting: Fix parameter passing in task_group_account_field sched/accounting: Fix user/system tick double accounting sched/accounting: Re-use scheduler statistics for the root cgroup ... Fix up conflicts in - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h usecs_to_cputime64() vs the sparse cleanups - kernel/sched/fair.c, kernel/time/tick-sched.c scheduler changes in multiple branches
2012-01-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits) perf kvm: Fix copy & paste error in description perf script: Kill script_spec__delete perf top: Fix a memory leak perf stat: Introduce get_ratio_color() helper perf session: Remove impossible condition check perf tools: Fix feature-bits rework fallout, remove unused variable perf script: Add generic perl handler to process events perf tools: Use for_each_set_bit() to iterate over feature flags perf tools: Unify handling of features when writing feature section perf report: Accept fifos as input file perf tools: Moving code in some files perf tools: Fix out-of-bound access to struct perf_session perf tools: Continue processing header on unknown features perf tools: Improve macros for struct feature_ops perf: builtin-record: Document and check that mmap_pages must be a power of two. perf: builtin-record: Provide advice if mmap'ing fails with EPERM. perf tools: Fix truncated annotation perf script: look up thread using tid instead of pid perf tools: Look up thread names for system wide profiling perf tools: Fix comm for processes with named threads ...
2012-01-06Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits) cpu: Export cpu_up() rcu: Apply ACCESS_ONCE() to rcu_boost() return value Revert "rcu: Permit rt_mutex_unlock() with irqs disabled" docs: Additional LWN links to RCU API rcu: Augment rcu_batch_end tracing for idle and callback state rcu: Add rcutorture tests for srcu_read_lock_raw() rcu: Make rcutorture test for hotpluggability before offlining CPUs driver-core/cpu: Expose hotpluggability to the rest of the kernel rcu: Remove redundant rcu_cpu_stall_suppress declaration rcu: Adaptive dyntick-idle preparation rcu: Keep invoking callbacks if CPU otherwise idle rcu: Irq nesting is always 0 on rcu_enter_idle_common rcu: Don't check irq nesting from rcu idle entry/exit rcu: Permit dyntick-idle with callbacks pending rcu: Document same-context read-side constraints rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass rcu: Remove dynticks false positives and RCU failures rcu: Reduce latency of rcu_prepare_for_idle() rcu: Eliminate RCU_FAST_NO_HZ grace-period hang rcu: Avoid needlessly IPIing CPUs at GP end ...
2012-01-06Merge branch 'core-memblock-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) memblock: Reimplement memblock allocation using reverse free area iterator memblock: Kill early_node_map[] score: Use HAVE_MEMBLOCK_NODE_MAP s390: Use HAVE_MEMBLOCK_NODE_MAP mips: Use HAVE_MEMBLOCK_NODE_MAP ia64: Use HAVE_MEMBLOCK_NODE_MAP SuperH: Use HAVE_MEMBLOCK_NODE_MAP sparc: Use HAVE_MEMBLOCK_NODE_MAP powerpc: Use HAVE_MEMBLOCK_NODE_MAP memblock: Implement memblock_add_node() memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users memblock: Track total size of regions automatically powerpc: Cleanup memblock usage memblock: Reimplement memblock_enforce_memory_limit() using __memblock_remove() memblock: Make memblock functions handle overflowing range @size memblock: Reimplement __memblock_remove() using memblock_isolate_range() memblock: Separate out memblock_isolate_range() from memblock_set_node() memblock: Kill memblock_init() memblock: Kill sentinel entries at the end of static region arrays memblock: Add __memblock_dump_all() ...
2012-01-06x86-64: Slightly shorten copy_page()Jan Beulich
%r13 got saved and restored without ever getting touched, so there's no need to do so. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F05D9F9020000780006AA0D@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04x86: Fix atomic64_xxx_cx8() functionsEric Dumazet
It appears about all functions in arch/x86/lib/atomic64_cx8_32.S are wrong in case cmpxchg8b must be restarted, because LOCK_PREFIX macro defines a label "1" clashing with other local labels : 1: some_instructions LOCK_PREFIX cmpxchg8b (%ebp) jne 1b / jumps to beginning of LOCK_PREFIX ! A possible fix is to use a magic label "672" in LOCK_PREFIX asm definition, similar to the "671" one we defined in LOCK_PREFIX_HERE. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jan Beulich <JBeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1325608540.2320.103.camel@edumazet-HP-Compaq-6005-Pro-SFF-PC Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04x86: Fix and improve cmpxchg_double{,_local}()Jan Beulich
Just like the per-CPU ones they had several problems/shortcomings: Only the first memory operand was mentioned in the asm() operands, and the 2x64-bit version didn't have a memory clobber while the 2x32-bit one did. The former allowed the compiler to not recognize the need to re-load the data in case it had it cached in some register, while the latter was overly destructive. The types of the local copies of the old and new values were incorrect (the types of the pointed-to variables should be used here, to make sure the respective old/new variable types are compatible). The __dummy/__junk variables were pointless, given that local copies of the inputs already existed (and can hence be used for discarded outputs). The 32-bit variant of cmpxchg_double_local() referenced cmpxchg16b_local(). At once also: - change the return value type to what it really is: 'bool' - unify 32- and 64-bit variants - abstract out the common part of the 'normal' and 'local' variants Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Christoph Lameter <cl@linux.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/4F01F12A020000780006A19B@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-04Merge commit 'v3.2-rc7' into x86/asmIngo Molnar
Merge reason: Update from -rc4 to -rc7. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-03switch debugfs to umode_tAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03switch device_get_devnode() and ->devnode() to umode_t *Al Viro
both callers of device_get_devnode() are only interested in lower 16bits and nobody tries to return anything wider than 16bit anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03x86/mce: Recognise machine check bank signature for data path errorTony Luck
Action required data path signature is defined in table 15-19 of SDM: +-----------------------------------------------------------------------------+ | SRAR Error | Valid | OVER | UC | EN | MISCV | ADDRV | PCC | S | AR | MCACOD | | Data Load | 1 | 0 | 1 | 1 | 1 | 1 | 0 | 1 | 1 | 0x134 | +-----------------------------------------------------------------------------+ Recognise this, and pass MCE_AR_SEVERITY code back to do_machine_check() if we have the action handler configured (CONFIG_MEMORY_FAILURE=y) Acked-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-01-03x86/mce: Handle "action required" errorsTony Luck
All non-urgent actions (reporting low severity errors and handling "action-optional" errors) are now handled by a work queue. This means that TIF_MCE_NOTIFY can be used to block execution for a thread experiencing an "action-required" fault until we get all cpus out of the machine check handler (and the thread that hit the fault into mce_notify_process(). We use the new mce_{save,find,clear}_info() API to get information from do_machine_check() to mce_notify_process(), and then use the newly improved memory_failure(..., MF_ACTION_REQUIRED) to handle the error (possibly signalling the process). Update some comments to make the new code flows clearer. Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-01-03x86/mce: Add mechanism to safely save information in MCE handlerTony Luck
Machine checks on Intel cpus interrupt execution on all cpus, regardless of interrupt masking. We have a need to save some data about the cause of the machine check (physical address) in the machine check handler that can be retrieved later to attempt recovery in a more flexible execution state. Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-01-03x86/mce: Create helper function to save addr/misc when neededTony Luck
The MCI_STATUS_MISCV and MCI_STATUS_ADDRV bits in the bank status registers define whether the MISC and ADDR registers respectively contain valid data - provide a helper function to check these bits and read the registers when needed. In addition, processors that support software error recovery (as indicated by the MCG_SER_P bit in the MCG_CAP register) may include some undefined bits in the ADDR register - mask these out. Acked-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2012-01-03HWPOISON: Clean up memory_failure() vs. __memory_failure()Tony Luck
There is only one caller of memory_failure(), all other users call __memory_failure() and pass in the flags argument explicitly. The lone user of memory_failure() will soon need to pass flags too. Add flags argument to the callsite in mce.c. Delete the old memory_failure() function, and then rename __memory_failure() without the leading "__". Provide clearer message when action optional memory errors are ignored. Acked-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-12-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix raw_spin_unlock_irqrestore() usage oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue
2011-12-29x86/intel config: Fix the APB_TIMER selectionAlan Cox
Seems Kconfig SELECT isn't selecting things hierarchically when selected. config APB_TIMER def_bool y if X86_INTEL_MID prompt "Intel MID APB Timer Support" if X86_INTEL_MID select DW_APB_TIMER depends on X86_INTEL_MID && SFI when we select APB_TIMER doesn't select DW_APB_TIMER so do it by hand. Signed-off-by: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/n/tip-kpnaimplltk6d1lolusqj3ae@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-27KVM: x86 emulator: implement RDPMC (0F 33)Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: x86 emulator: fix RDPMC privilege checkAvi Kivity
RDPMC is only privileged if CR4.PCE=0. check_rdpmc() already implements this, so all we need to do is drop the Priv flag. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: Expose the architectural performance monitoring CPUID leafGleb Natapov
Provide a CPUID leaf that describes the emulated PMU. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: VMX: Intercept RDPMCAvi Kivity
Intercept RDPMC and forward it to the PMU emulation code. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: SVM: Intercept RDPMCAvi Kivity
Intercept RDPMC and forward it to the PMU emulation code. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: Add generic RDPMC supportAvi Kivity
Add a helper function that emulates the RDPMC instruction operation. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: Expose a version 2 architectural PMU to a guestsGleb Natapov
Use perf_events to emulate an architectural PMU, version 2. Based on PMU version 1 emulation by Avi Kivity. [avi: adjust for cpuid.c] [jan: fix anonymous field initialization for older gcc] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: Expose kvm_lapic_local_deliver()Avi Kivity
Needed to deliver performance monitoring interrupts. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: x86 emulator: Use opcode::execute for Group 9 instructionTakuya Yoshikawa
Group 9: 0F C7 Rename em_grp9() to em_cmpxchg8b() and register it. Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: x86 emulator: Use opcode::execute for Group 4/5 instructionsTakuya Yoshikawa
Group 4: FE Group 5: FF Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: x86 emulator: Use opcode::execute for Group 1A instructionTakuya Yoshikawa
Group 1A: 8F Register em_pop() directly and remove em_grp1a(). Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: drop bsp_vcpu pointer from kvm structGleb Natapov
Drop bsp_vcpu pointer from kvm struct since its only use is incorrect anyway. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-12-27KVM: x86: Consolidate PIT legacy testJan Kiszka
Move the test for KVM_PIT_FLAGS_HPET_LEGACY into create_pit_timer instead of replicating it on the caller site. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-12-27KVM: x86: Do not rely on implicit inclusionsJan Kiszka
Works so far by change, but it is not guaranteed to stay like this. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-12-27KVM: Make KVM_INTEL depend on CPU_SUP_INTELAvi Kivity
PMU virtualization needs to talk to Intel-specific bits of perf; these are only available when CPU_SUP_INTEL=y. Fixes arch/x86/built-in.o: In function `atomic_switch_perf_msrs': vmx.c:(.text+0x6b1d4): undefined reference to `perf_guest_get_msrs' Reported-by: Ingo Molnar <mingo@elte.hu> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-12-27Merge remote-tracking branch 'tip/perf/core' into kvm-updates/3.3Avi Kivity
* tip/perf/core: (66 commits) perf, x86: Expose perf capability to other modules perf, x86: Implement arch event mask as quirk x86, perf: Disable non available architectural events jump_label: Provide jump_label_key initializers jump_label, x86: Fix section mismatch perf, core: Rate limit perf_sched_events jump_label patching perf: Fix enable_on_exec for sibling events perf: Remove superfluous arguments perf, x86: Prefer fixed-purpose counters when scheduling perf, x86: Fix event scheduler for constraints with overlapping counters perf, x86: Implement event scheduler helper functions perf: Avoid a useless pmu_disable() in the perf-tick x86/tools: Add decoded instruction dump mode x86: Update instruction decoder to support new AVX formats x86/tools: Fix insn_sanity message outputs x86/tools: Fix instruction decoder message output x86: Fix instruction decoder to handle grouped AVX instructions x86/tools: Fix Makefile to build all test tools perf test: Soft errors shouldn't stop the "Validate PERF_RECORD_" test perf test: Validate PERF_RECORD_ events and perf_sample fields ... Signed-off-by: Avi Kivity <avi@redhat.com> * commit 'b3d9468a8bd218a695e3a0ff112cd4efd27b670a': (66 commits) perf, x86: Expose perf capability to other modules perf, x86: Implement arch event mask as quirk x86, perf: Disable non available architectural events jump_label: Provide jump_label_key initializers jump_label, x86: Fix section mismatch perf, core: Rate limit perf_sched_events jump_label patching perf: Fix enable_on_exec for sibling events perf: Remove superfluous arguments perf, x86: Prefer fixed-purpose counters when scheduling perf, x86: Fix event scheduler for constraints with overlapping counters perf, x86: Implement event scheduler helper functions perf: Avoid a useless pmu_disable() in the perf-tick x86/tools: Add decoded instruction dump mode x86: Update instruction decoder to support new AVX formats x86/tools: Fix insn_sanity message outputs x86/tools: Fix instruction decoder message output x86: Fix instruction decoder to handle grouped AVX instructions x86/tools: Fix Makefile to build all test tools perf test: Soft errors shouldn't stop the "Validate PERF_RECORD_" test perf test: Validate PERF_RECORD_ events and perf_sample fields ...
2011-12-27KVM: Use memdup_user instead of kmalloc/copy_from_userSasha Levin
Switch to using memdup_user when possible. This makes code more smaller and compact, and prevents errors. Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: Use kmemdup() instead of kmalloc/memcpySasha Levin
Switch to kmemdup() in two places to shorten the code and avoid possible bugs. Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: x86 emulator: Remove set-but-unused cr4 from check_cr_writeJan Kiszka
This was probably copy&pasted from the cr0 case, but it's unneeded here. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: MMU: Drop unused return value of kvm_mmu_remove_some_alloc_mmu_pagesJan Kiszka
freed_pages is never evaluated, so remove it as well as the return code kvm_mmu_remove_some_alloc_mmu_pages so far delivered to its only user. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: use this_cpu_xxx replace percpu_xxx funcsAlex,Shi
percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them for further code clean up. And in preempt safe scenario, __this_cpu_xxx funcs has a bit better performance since __this_cpu_xxx has no redundant preempt_disable() Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: MMU: audit: inline audit functionXiao Guangrong
inline audit function and little cleanup Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: MMU: remove oos_shadow parameterXiao Guangrong
The unsync code should be stable now, maybe it is the time to remove this parameter to cleanup the code a little bit Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-12-27KVM: MMU: move the relevant mmu code to mmu.cXiao Guangrong
Move the mmu code in kvm_arch_vcpu_init() to kvm_mmu_create() Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 14:09:08 +0000