summaryrefslogtreecommitdiffstats
path: root/arch/x86
AgeCommit message (Collapse)Author
2015-01-26KVM: x86: ARPL emulation can cause spurious exceptionsNadav Amit
ARPL and MOVSXD are encoded the same and their execution depends on the execution mode. The operand sizes of each instruction are different. Currently, ARPL is detected too late, after the decoding was already done, and therefore may result in spurious exception (instead of failed emulation). Introduce a group to the emulator to handle instructions according to execution mode (32/64 bits). Note: in order not to make changes that may affect performance, the new ModeDual can only be applied to instructions with ModRM. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26KVM: x86: IRET emulation does not clear NMI maskingNadav Amit
The IRET instruction should clear NMI masking, but the current implementation does not do so. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26KVM: x86: Wrong operand size for far retNadav Amit
Indeed, Intel SDM specifically states that for the RET instruction "In 64-bit mode, the default operation size of this instruction is the stack-address size, i.e. 64 bits." However, experiments show this is not the case. Here is for example objdump of small 64-bit asm: 4004f1: ca 14 00 lret $0x14 4004f4: 48 cb lretq 4004f6: 48 ca 14 00 lretq $0x14 Therefore, remove the Stack flag from far-ret instructions. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26KVM: x86: Dirty the dest op page on cmpxchg emulationNadav Amit
Intel SDM says for CMPXCHG: "To simplify the interface to the processor’s bus, the destination operand receives a write cycle without regard to the result of the comparison.". This means the destination page should be dirtied. Fix it to by writing back the original value if cmpxchg failed. Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26x86,xen: use current->state helpersDavidlohr Bueso
Call __set_current_state() instead of assigning the new state directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping track of who changed the state. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Hopefully the last round of fixes for 3.19 - regression fix for the LDT changes - regression fix for XEN interrupt handling caused by the APIC changes - regression fixes for the PAT changes - last minute fixes for new the MPX support - regression fix for 32bit UP - fix for a long standing relocation issue on 64bit tagged for stable - functional fix for the Hyper-V clocksource tagged for stable - downgrade of a pr_err which tends to confuse users Looks a bit on the large side, but almost half of it are valuable comments" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" x86, tls, ldt: Stop checking lm in LDT_empty x86, mpx: Strictly enforce empty prctl() args x86, mpx: Fix potential performance issue on unmaps x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels x86, hyperv: Mark the Hyper-V clocksource as being continuous x86: Don't rely on VMWare emulating PAT MSR correctly x86, irq: Properly tag virtualization entry in /proc/interrupts x86, boot: Skip relocs when load address unchanged x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable() x86/xen: Treat SCI interrupt as normal GSI interrupt
2015-01-25Drivers: hv: vmbus: Implement a clockevent deviceK. Y. Srinivasan
Implement a clockevent device based on the timer support available on Hyper-V. In this version of the patch I have addressed Jason's review comments. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-24x86, init: Fix UP boot regression on x86_64Thomas Gleixner
Commit 30b8b0066caf "init: Get rid of x86isms" broke the UP boot on x86_64. That happens because CONFIG_UP_LATE_INIT depends on CONFIG_X86_UP_APIC. X86_UP_APIC is a 32bit only config switch and therefor not set on 64bit UP builds. As a consequence the UP init of the local APIC and the IOAPIC is not called, which results in a boot failure. Make it depend on !SMP && X86_LOCAL_APIC instead. Fixes: 30b8b0066caf init: Get rid of x86isms Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-24Merge tag 'pci-v3.19-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for: - a resource management problem that causes a Radeon "Fatal error during GPU init" on machines where the BIOS programmed an invalid Root Port window. This was a regression in v3.16. - an Atheros AR93xx device that doesn't handle PCI bus resets correctly. This was a regression in v3.14. - an out-of-date email address" * tag 'pci-v3.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Richard Zhu's email address sparc/PCI: Clip bridge windows to fit in upstream windows powerpc/PCI: Clip bridge windows to fit in upstream windows parisc/PCI: Clip bridge windows to fit in upstream windows mn10300/PCI: Clip bridge windows to fit in upstream windows microblaze/PCI: Clip bridge windows to fit in upstream windows ia64/PCI: Clip bridge windows to fit in upstream windows frv/PCI: Clip bridge windows to fit in upstream windows alpha/PCI: Clip bridge windows to fit in upstream windows x86/PCI: Clip bridge windows to fit in upstream windows PCI: Add pci_claim_bridge_resource() to clip window if necessary PCI: Add pci_bus_clip_resource() to clip to fit upstream window PCI: Pass bridge device, not bus, when updating bridge windows PCI: Mark Atheros AR93xx to avoid bus reset PCI: Add flag for devices where we can't use bus reset
2015-01-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Three small fixes. Two for x86 and one avoids that sparse bails out" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: SYSENTER emulation is broken KVM: x86: Fix of previously incomplete fix for CVE-2014-8480 KVM: fix sparse warning in include/trace/events/kvm.h
2015-01-23x86, e820: Clean up sanitize_e820_map() usersWANG Chao
The argument 3 of sanitize_e820_map() will only be updated upon a successful sanitization. Some of the callers have extra conditionals for the same purpose. Clean them up. default_machine_specific_memory_setup() must keep the extra conditional because boot_params.e820_entries is an u8 and not an u32, so the direct update would overwrite other fields in boot_params. [ tglx: Massaged changelog ] Signed-off-by: WANG Chao <chaowang@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Lee Chun-Yi <joeyli.kernel@gmail.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Link: http://lkml.kernel.org/r/1420601859-18439-1-git-send-email-chaowang@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-23x86, setup: Let early_memremap() handle page alignmentWANG Chao
early_memremap() takes care of page alignment and map size, so we can just remap the required data size and get rid of the adjustments in the setup code. [tglx: Massaged changelog ] Signed-off-by: WANG Chao <chaowang@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Link: http://lkml.kernel.org/r/1420628150-16872-1-git-send-email-chaowang@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-23Merge tag 'kvm-s390-next-20150122' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next KVM: s390: fixes and features for kvm/next (3.20) 1. Generic - sparse warning (make function static) - optimize locking - bugfixes for interrupt injection - fix MVPG addressing modes 2. hrtimer/wakeup fun A recent change can cause KVM hangs if adjtime is used in the host. The hrtimer might wake up too early or too late. Too early is fatal as vcpu_block will see that the wakeup condition is not met and sleep again. This CPU might never wake up again. This series addresses this problem. adjclock slowing down the host clock will result in too late wakeups. This will require more work. In addition to that we also change the hrtimer from REALTIME to MONOTONIC to avoid similar problems with timedatectl set-time. 3. sigp rework We will move all "slow" sigps to QEMU (protected with a capability that can be enabled) to avoid several races between concurrent SIGP orders. 4. Optimize the shadow page table Provide an interface to announce the maximum guest size. The kernel will use that to make the pagetable 2,3,4 (or theoretically) 5 levels. 5. Provide an interface to set the guest TOD We now use two vm attributes instead of two oneregs, as oneregs are vcpu ioctl and we don't want to call them from other threads. 6. Protected key functions The real HMC allows to enable/disable protected key CPACF functions. Lets provide an implementation + an interface for QEMU to activate this the protected key instructions.
2015-01-23KVM: x86: SYSENTER emulation is brokenNadav Amit
SYSENTER emulation is broken in several ways: 1. It misses the case of 16-bit code segments completely (CVE-2015-0239). 2. MSR_IA32_SYSENTER_CS is checked in 64-bit mode incorrectly (bits 0 and 1 can still be set without causing #GP). 3. MSR_IA32_SYSENTER_EIP and MSR_IA32_SYSENTER_ESP are not masked in legacy-mode. 4. There is some unneeded code. Fix it. Cc: stable@vger.linux.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-23KVM: x86: Fix of previously incomplete fix for CVE-2014-8480Nadav Amit
STR and SLDT with rip-relative operand can cause a host kernel oops. Mark them as DstMem as well. Cc: stable@vger.linux.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-23Merge tag 'kvm-arm-for-3.20' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/ARM changes for v3.20 including GICv3 emulation, dirty page logging, added trace symbols, and adding an explicit VGIC init device control IOCTL. Conflicts: arch/arm64/include/asm/kvm_arm.h arch/arm64/kvm/handle_exit.c
2015-01-23KVM: remove unneeded return value of vcpu_postcreateDominik Dingel
The return value of kvm_arch_vcpu_postcreate is not checked in its caller. This is okay, because only x86 provides vcpu_postcreate right now and it could only fail if vcpu_load failed. But that is not possible during KVM_CREATE_VCPU (kvm_arch_vcpu_load is void, too), so just get rid of the unchecked return value. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-01-23x86/tsc: Change Fast TSC calibration failed from error to infoAlexandre Demers
Many users see this message when booting without knowning that it is of no importance and that TSC calibration may have succeeded by another way. As explained by Paul Bolle in http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein "Fast TSC calibration failed" should not be considered as an error since other calibration methods are being tried afterward. At most, those send a warning if they fail (not an error). So let's change the message from error to warning. [ tglx: Make if pr_info. It's really not important at all ] Fixes: c767a54ba065 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level> Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-23x86/rtc: Remove duplicate const specifierColin King
Building with clang: CC arch/x86/kernel/rtc.o arch/x86/kernel/rtc.c:173:29: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier] static const char * const const ids[] __initconst = Remove the duplicate const, it is not needed and causes a warning. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: http://lkml.kernel.org/r/1421244475-313-1-git-send-email-colin.king@canonical.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-23x86/apic: Re-enable PCI_MSI support for non-SMP X86_32Bryan O'Donoghue
Commit 0dbc6078c06bc0 ('x86, build, pci: Fix PCI_MSI build on !SMP') introduced the dependency that X86_UP_APIC is only available when PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit UP systems because it disables both APIC and IO-APIC. But APIC support is architecturally required for PCI_MSI. The intention of the patch was to enforce APIC support when PCI_MSI is enabled, but failed to do so. Remove the !PCI_MSI dependency from X86_UP_APIC and enforce X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems. [ tglx: Massaged changelog ] Fixes 0dbc6078c06bc0 'x86, build, pci: Fix PCI_MSI build on !SMP' Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ie Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86, mm: Change cachemode exports to non-gplJuergen Gross
Commit 281d4078bec3 ("x86: Make page cache mode a real type") introduced the symbols __cachemode2pte_tbl and __pte2cachemode_tbl and exported them via EXPORT_SYMBOL_GPL. The exports are part of a replacement of code which has been EXPORT_SYMBOL before these changes resulting in build breakage of out-of-tree non-gpl modules. Change EXPORT_SYMBOL_GPL to EXPORT-SYMBOL for these two symbols. Fixes: 281d4078bec3 "x86: Make page cache mode a real type" Reported-and-tested-by: Steven Noonan <steven@uplinklabs.net> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/1421926997-28615-1-git-send-email-jgross@suse.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86, tls: Interpret an all-zero struct user_desc as "no segment"Andy Lutomirski
The Witcher 2 did something like this to allocate a TLS segment index: struct user_desc u_info; bzero(&u_info, sizeof(u_info)); u_info.entry_number = (uint32_t)-1; syscall(SYS_set_thread_area, &u_info); Strictly speaking, this code was never correct. It should have set read_exec_only and seg_not_present to 1 to indicate that it wanted to find a free slot without putting anything there, or it should have put something sensible in the TLS slot if it wanted to allocate a TLS entry for real. The actual effect of this code was to allocate a bogus segment that could be used to exploit espfix. The set_thread_area hardening patches changed the behavior, causing set_thread_area to return -EINVAL and crashing the game. This changes set_thread_area to interpret this as a request to find a free slot and to leave it empty, which isn't *quite* what the game expects but should be close enough to keep it working. In particular, using the code above to allocate two segments will allocate the same segment both times. According to FrostbittenKing on Github, this fixes The Witcher 2. If this somehow still causes problems, we could instead allocate a limit==0 32-bit data segment, but that seems rather ugly to me. Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86, tls, ldt: Stop checking lm in LDT_emptyAndy Lutomirski
32-bit programs don't have an lm bit in their ABI, so they can't reliably cause LDT_empty to return true without resorting to memset. They shouldn't need to do this. This should fix a longstanding, if minor, issue in all 64-bit kernels as well as a potential regression in the TLS hardening code. Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix Cc: stable@vger.kernel.org Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/72a059de55e86ad5e2935c80aa91880ddf19d07c.1421954363.git.luto@amacapital.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86, mpx: Fix potential performance issue on unmapsDave Hansen
The 3.19 merge window saw some TLB modifications merged which caused a performance regression. They were fixed in commit 045bbb9fa. Once that fix was applied, I also noticed that there was a small but intermittent regression still present. It was not present consistently enough to bisect reliably, but I'm fairly confident that it came from (my own) MPX patches. The source was reading a relatively unused field in the mm_struct via arch_unmap. I also noted that this code was in the main instruction flow of do_munmap() and probably had more icache impact than we want. This patch does two things: 1. Adds a static (via Kconfig) and dynamic (via cpuid) check for MPX with cpu_feature_enabled(). This keeps us from reading that cacheline in the mm and trades it for a check of the global CPUID variables at least on CPUs without MPX. 2. Adds an unlikely() to ensure that the MPX call ends up out of the main instruction flow in do_munmap(). I've added a detailed comment about why this was done and why we want it even on systems where MPX is present. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: luto@amacapital.net Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20150108223021.AEEAB987@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernelsDave Hansen
We had originally planned on submitting MPX support in one patch set. We eventually broke it up in to two pieces for easier review. One of the features that didn't make the first round was supporting 32-bit binaries on 64-bit kernels. Once we split the set up, we never added code to restrict 32-bit binaries from _using_ MPX on 64-bit kernels. The 32-bit bounds tables are a different format than the 64-bit ones. Without this patch, the kernel will try to read a 32-bit binary's tables as if they were the 64-bit version. They will likely be noticed as being invalid rather quickly and the app will get killed, but that's kinda mean. This patch adds an explicit check, and will make a 64-bit kernel essentially behave as if it has no MPX support when called from a 32-bit binary. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20150108223020.9E9AA511@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-23Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module and param fixes from Rusty Russell: "Surprising number of fixes this merge window :( The first two are minor fallout from the param rework which went in this merge window. The next three are a series which fixes a longstanding (but never previously reported and unlikely , so no CC stable) race between kallsyms and freeing the init section. Finally, a minor cleanup as our module refcount will now be -1 during unload" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: make module_refcount() a signed integer. module: fix race in kallsyms resolution during module load success. module: remove mod arg from module_free, rename module_memfree(). module_arch_freeing_init(): new hook for archs before module->module_init freed. param: fix uninitialized read with CONFIG_DEBUG_LOCK_ALLOC param: initialize store function to NULL if not available.
2015-01-22x86/acpi: Make acpi_[un]register_gsi_ioapic() depend on CONFIG_X86_LOCAL_APICThomas Gleixner
Get rid of the defined but not used warnings Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-01-22x86: Consolidate boot cpu timer setupThomas Gleixner
Now that the APIC bringup is consolidated we can move the setup call for the percpu clock event device to apic_bsp_setup(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211704.162567839@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Reuse apic_bsp_setup() for UP APIC setupThomas Gleixner
Extend apic_bsp_setup() so the same code flow can be used for APIC_init_uniprocessor(). Folded Jiangs fix to provide proper ordering of the UP setup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211704.084765674@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/smpboot: Sanitize uniprocessor initThomas Gleixner
The UP related setups for local apic are mangled into smp_sanity_check(). That results in duplicate calls to disable_smp() and makes the code hard to follow. Let smp_sanity_check() return dedicated values for the various exit reasons and handle them at the call site. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.987833932@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/smpboot: Move apic init code to apic.cThomas Gleixner
We better provide proper functions which implement the required code flow in the apic code rather than letting the smpboot code open code it. That allows to make more functions static and confines the APIC functionality to apic.c where it belongs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.907616730@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22init: Get rid of x86ismsThomas Gleixner
The UP local API support can be set up from an early initcall. No need for horrible hackery in the init code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Move apic_init_uniprocessor codeThomas Gleixner
Move the code to a different place so we can make other functions inline. Preparatory patch for further cleanups. No change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.731329006@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/smpboot: Cleanup ioapic handlingThomas Gleixner
smpboot is very creative with the ways to disable ioapic. smpboot_clear_io_apic() smpboot_clear_io_apic_irqs() and disable_ioapic_support() serve a similar purpose. smpboot_clear_io_apic_irqs() is the most useless of all functions as it clears a variable which has not been setup yet. Aside of that it has the same ifdef mess and conditionals around the ioapic related code, which can now be removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.650280684@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Sanitize ioapic handlingThomas Gleixner
We have proper stubs for the IOAPIC=n case and the setup/enable function have the required checks inside now. Remove the ifdeffery and the copy&pasted conditionals. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>C Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.569830549@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/ioapic: Add proper checks to setp/enable_IO_APIC()Thomas Gleixner
No point to have the same checks at every call site. Add them to the functions, so they can be called unconditionally. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.490719938@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/ioapic: Provide stub functions for IOAPIC%3DnThomas Gleixner
To avoid lots of ifdeffery provide proper stubs for setup_IO_APIC(), enable_IO_APIC() and setup_ioapic_dest(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.397170414@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/smpboot: Move smpboot inlines to codeThomas Gleixner
No point for a separate header file. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.304126687@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/x2apic: Use state information for disableThomas Gleixner
Use the state information to simplify the disable logic further. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.209387598@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/x2apic: Split enable and setup functionThomas Gleixner
enable_x2apic() is a convoluted unreadable mess because it is used for both enablement in early boot and for setup in cpu_init(). Split the code into x2apic_enable() for enablement and x2apic_setup() for setup of (secondary cpus). Make use of the new state tracking to simplify the logic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.129287153@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/x2apic: Disable x2apic from nox2apic setupThomas Gleixner
There is no point in postponing the hardware disablement of x2apic. It can be disabled right away in the nox2apic setup function. Disable it right away and set the state to DISABLED . This allows to remove all the nox2apic conditionals all over the place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.051214090@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/x2apic: Add proper state trackingThomas Gleixner
Having 3 different variables to track the state is just silly and error prone. Add a proper state tracking variable which covers the three possible states: ON/OFF/DISABLED. We cannot use x2apic_mode for this as this would require to change all users of x2apic_mode with explicit comparisons for a state value instead of treating it as boolean. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.955392443@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/x2apic: Clarify remapping mode for x2apic enablementThomas Gleixner
Rename the argument of try_to_enable_x2apic() so the purpose becomes more clear. Make the pr_warning more consistent and avoid the double print of "disabling". Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.876012628@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/x2apic: Move code in conditional regionThomas Gleixner
No point in having try_to_enable_x2apic() outside of the CONFIG_X86_X2APIC section and having inline functions and more ifdefs to deal with it. Move the code into the existing ifdef section and remove the inline cruft. Fixup the printk about not enabling interrupt remapping as suggested by Boris. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.795388613@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Check x2apic earlyThomas Gleixner
No point in delaying the x2apic detection for the CONFIG_X86_X2APIC=n case to enable_IR_x2apic(). We rather detect that before we try to setup anything there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.702479404@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Make disable x2apic work reallyThomas Gleixner
If x2apic_preenabled is not enabled, then disable_x2apic() is not called from various places which results in x2apic_disabled not being set. So other code pathes can happily reenable the x2apic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.621431109@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/ioapic: Check x2apic reallyThomas Gleixner
The x2apic_preenabled flag is just a horrible hack and if X2APIC support is disabled it does not reflect the actual hardware state. Check the hardware instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.541280622@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Move x2apic code to one placeThomas Gleixner
Having several disjunct pieces of code for x2apic support makes reading the code unnecessarily hard. Move it to one ifdeffed section. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.445212133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Make x2apic_mode depend on CONFIG_X86_X2APICThomas Gleixner
No point in having a static variable around which is always 0. Let the compiler optimize code out if disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.363274310@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-22x86/apic: Avoid open coded x2apic detectionThomas Gleixner
enable_IR_x2apic() grew a open coded x2apic detection. Implement a proper helper function which shares the code with the already existing x2apic_enabled(). Made it use rdmsrl_safe as suggested by Boris. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.285038186@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 05:24:33 +0000