| Age | Commit message (Collapse) | Author |
|---|
|
Use the simple-bus node to discover the io area, and remap the cached and
bypass io ranges. The parent-bus-address value of the first triplet in the
"ranges" property is used. This value is rounded down to the nearest 256MB
boundary. The length of the io area is fixed at 256MB; the "ranges" property
length value is ignored.
Other limitations: (1) only the first simple-bus node is considered, and (2)
only the first triplet of the "ranges" property is considered.
See ePAPR 1.1 §6.5 for the simple-bus node description, and §2.3.8 for the
"ranges" property description.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Define IO addresses in a single place, to make it easier to change for
non-standard memory maps.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB
way 6:
Way 6 (512 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0x00000000 0x00000000 0x01 0x03 RWX Bypass
0x20000000 0x20000000 0x01 0x03 RWX Bypass
0x40000000 0x40000000 0x01 0x03 RWX Bypass
0x60000000 0x60000000 0x01 0x03 RWX Bypass
0x80000000 0x80000000 0x01 0x03 RWX Bypass
0xa0000000 0xa0000000 0x01 0x03 RWX Bypass
0xc0000000 0xc0000000 0x01 0x03 RWX Bypass
0xe0000000 0xe0000000 0x01 0x03 RWX Bypass
This patch adds remapping code at the reset vector or at the kernel
_start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that
reconfigures MMUv3 as MMUv2:
Way 5 (128 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0xd0000000 0x00000000 0x01 0x07 RWX WB
0xd8000000 0x00000000 0x01 0x03 RWX Bypass
Way 6 (256 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0xe0000000 0xf0000000 0x01 0x07 RWX WB
0xf0000000 0xf0000000 0x01 0x03 RWX Bypass
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
|
In order to use S32C1I instruction on cores with ATOMCTL SR the register
must be properly initialized.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
|
