summaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)Author
2006-03-22[PATCH] remove set_page_count(page, 0) users (outside mm)Nick Piggin
A couple of places set_page_count(page, 1) that don't need to. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] x86_64: pageattr remove __put_pageNick Piggin
Remove page_count and __put_page from x86-64 pageattr Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] x86_64: pageattr use single listNick Piggin
Use page->lru.next to implement the singly linked list of pages rather than the struct deferred_page which needs to be allocated and freed for each page. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] i386: pageattr remove __put_pageNick Piggin
Stop using __put_page and page_count in i386 pageattr.c Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] on_each_cpu(): disable local interruptsAndrew Morton
When on_each_cpu() runs the callback on other CPUs, it runs with local interrupts disabled. So we should run the function with local interrupts disabled on this CPU, too. And do the same for UP, so the callback is run in the same environment on both UP and SMP. (strictly it should do preempt_disable() too, but I think local_irq_disable is sufficiently equivalent). Also uninlines on_each_cpu(). softirq.c was the most appropriate file I could find, but it doesn't seem to justify creating a new file. Oh, and fix up that comment over (under?) x86's smp_call_function(). It drives me nuts. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] mm: split highorder pagesNick Piggin
Have an explicit mm call to split higher order pages into individual pages. Should help to avoid bugs and be more explicit about the code's intention. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] xtensa: pgtable fixesNick Piggin
- Don't return uninitialised stack values in case of allocation failure - Don't bother clearing PageCompound because __GFP_COMP wasn't specified Increment over the pte page rather than one pte entry in pte_alloc_one_kernel - Actually increment the page pointer in pte_alloc_one - Compile fixes, typos. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] multiple exports of strpbrkAndrew Morton
Sam's tree includes a new check, which found that we're exporting strpbrk() multiple times. It seems that the convention is that this is exported from the arch files, so reove the lib/string.c export. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] x86: mark cyc2ns_scale readmostlyRavikiran G Thirumalai
This variable is rarely written to. Mark the variable accordingly. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] efi_call_phys_epilog() warning fixAndrew Morton
arch/i386/kernel/efi.c: In function `efi_call_phys_epilog': arch/i386/kernel/efi.c:118: warning: assignment makes integer from pointer without a cast Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[ARM] Quieten spurious IRQ detectionRussell King
Only issue a "nobody cared" warning after 99900 spurious interrupts. This avoids the occasional spurious interrupt causing warnings, as per x86. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22Merge with ↵Jaroslav Kysela
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
2006-03-22[ALSA] Fix snd_xxx_t typedefsTakashi Iwai
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[SPARC64]: Add a secondary TSB for hugepage mappings.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22[SPARC]: Respect vm_page_prot in io_remap_page_range().David S. Miller
Make sure the callers do a pgprot_noncached() on vma->vm_page_prot. Pointed out by Hugh Dickens. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22[PATCH] powerpc: Remove calculation of io holeMichael Ellerman
In mm_init_ppc64() we calculate the location of the "IO hole", but then no one ever looks at the value. So don't bother. That's actually all mm_init_ppc64() does, so get rid of it too. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Add bootargs to /chosenMichael Ellerman
Add the command line args to the device tree as /chosen/bootargs. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Add /system-id, /model and /compatibleMichael Ellerman
Add /system-id, /model and /compatible to the iSeries device tree. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCIIMichael Ellerman
Add strne2a() which converts a string from EBCDIC to ASCII. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.cMichael Ellerman
Make mf_get_rtc(), mf_get_boot_rtc() and mf_set_rtc() static, cause they can be. We need to move mf_set_rtc() to avoid a forward declaration. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt)Michael Ellerman
These routines just call through to the mf routines, so point ppc_md straight at the mf routines. We need to pass the cmd through to mf_reboot to make it work, but that seems reasonable. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: iseries: mf related cleanupsMichael Ellerman
Some cleanups in the iSeries code. - Make mf_display_progress() check mf_initialized rather than the caller. - Set mf_initialized in mf_init() rather than in setup.c - Then move mf_initialized into mf.c, the only place it's used. - Move the mf related logic from iSeries_progress() to mf_display_progress() - Use a #define to size the pending_event_prealloc array - Use that define in the initialsation loop rather than sizeof jiggery pokery - Remove stupid comment(s) - Mark stuff static and/or __init Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: Replace platform_is_lpar() with a firmware featureMichael Ellerman
It has been decreed that platform numbers are evil, so as a step in that direction, replace platform_is_lpar() with a FW_FEATURE_LPAR bit. Currently FW_FEATURE_LPAR really means i/pSeries LPAR, in the future we might have to clean that up if we need to be more specific about what LPAR actually means. But that's another patch ... Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early()Michael Ellerman
When iommu_init_early_pSeries() was added, ages ago, we forgot to remove the code that checks /chosen/linux,iommu-off in pSeries_init_early(). We do it now in iommu_init_early_pSeries(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc: Unconfuse htab_bolt_mapping() callersMichael Ellerman
htab_bolt_mapping() takes a vstart and pstart parameter, but all but one of its callers actually pass it vstart and vstart. Luckily before it passes paddr (calculated from paddr) to the hpte_insert routines it calls virt_to_abs() (aka. __pa()) on the address, so there isn't actually a bug. map_io_page() however does pass pstart properly, so currently it's broken AFAICT because we're calling __pa(paddr) which will get us something very large. Presumably no one's calling map_io_page() in the right context. Anyway, change htab_bolt_mapping() callers to properly pass pstart, and then use it properly in htab_bolt_mapping(), ie. don't call __pa() on it again. Booted on p5 LPAR, iSeries and Power3. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc numa: Consolidate assignment of cpus to nodesNathan Lynch
We can plug the boot cpu into its node independently of whether numa topology is detected. And numa_setup_cpu does the right thing for all cases now, so remove special-casing for non-numa from the cpu hotplug callback. Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc numa: Support sparse online node mapNathan Lynch
The powerpc numa code unconditionally onlines all nodes from 0 to the highest node id found, regardless of whether cpus or memory are present in the nodes. This wastes 8K per node and complicates some cpu and memory hotplug situations, such as adding a resource that doesn't map to one of the nodes discovered at boot. Set nodes online as resources are scanned. Fall back to node 0 only when we're sure this isn't a NUMA machine. Instead of defaulting to node 0 for cases of hot-adding a resource which doesn't belong to any initialized node, assign it to the first online node. Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc numa: Consolidate handling of Power4 special caseNathan Lynch
Code to handle Power4's invalid node id (0xffff) is duplicated for cpu and memory. Better to handle this case in one place -- of_node_to_nid. Overall behavior should be unchanged. Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc numa: Get rid of "numa domain" terminologyNathan Lynch
Since we effectively treat the domain ids given to us by firmare as logical node ids, make this explicit (basically s/numa_domain/nid/). No functional changes, only variable and function names are modified. Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc numa: Minor cpu hotplug-related cleanupsNathan Lynch
map_cpu_to_node does not need to be inline, it is never called in a hot path. map_cpu_to_node, numa_setup_cpu, and find_cpu_node can be marked __cpuinit, as they are never used after boot if CONFIG_HOTPLUG_CPU=n. Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc numa: Minor debugging code changesNathan Lynch
Add debug statement for map_cpu_to_node; it's useful for cpu hotplug. Clarify debug statement about not finding the numa reference points property. Don't print a meaningless associativity depth (-1) on non-numa systems. Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22[PATCH] powerpc numa: fix boot_cpuid always assigned to node 0Nathan Lynch
At boot, the numa code is assigning boot_cpuid to node 0 unconditionally. Basically, numa_setup_cpu is being stupid about it, but this is the minimal fix -- just call numa_setup_cpu(boot_cpuid) later, after all nodes have been set online. Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-22Merge branch '85xx' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc
2006-03-21Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64-SGI] SN2-XP reduce kmalloc wrapper inlining [IA64] MCA: remove obsolete ifdef [IA64] MCA: update MCA comm field for user space tasks [IA64] MCA: print messages in MCA handler [IA64-SGI] - Eliminate SN pio_phys_xxx macros. Move to assembly [IA64] use icc defined constant [IA64] add __builtin_trap definition for icc build [IA64] clean up asm/intel_intrin.h [IA64] map ia64_hint definition to intel compiler intrinsic [IA64] hooks to wait for mmio writes to drain when migrating processes [IA64-SGI] driver bugfixes and hardware workarounds for CE1.0 asic [IA64-SGI] Handle SC env. powerdown events [IA64] Delete MCA/INIT sigdelayed code [IA64-SGI] sem2mutex ioc4.c [IA64] implement ia64 specific mutex primitives [IA64] Fix UP build with BSP removal support. [IA64] support for cpu0 removal
2006-03-21[ARM] Use kcalloc to allocate counter_config array rather than kmallocRussell King
We need this to be zero initialised. Since this is an array, use kcalloc rather than kzalloc or kmalloc. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Oprofile: dynamically allocate counter_configRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Oprofile: Convert semaphore to mutexRussell King
op_arm_sem is being used as a mutex, so convert it to use real mutexes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3376/2: S3C2410 - update defconfigBen Dooks
Patch from Ben Dooks Add Simtec Osiris to the default build, and enable the USB-OHCI section by default. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3375/1: S3C2440 - fix osiris machine buildBen Dooks
Patch from Ben Dooks Fix the build of arch/arm/mach-s3c2410/mach-osiris.c and fix the warnings from sparse. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3374/1: ep93xx: gpio interrupt supportLennert Buytenhek
Patch from Lennert Buytenhek Add GPIO interrupt support for the first 16 GPIO lines (port A and B.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3361/1: S3C24XX - add USB bus clock sourceBen Dooks
Patch from Ben Dooks Add USB bus clock definition for 48MHz fed to OHCI and gadget cores Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3360/1: S3C2440 - add set rate methods and camera clockBen Dooks
Patch from Ben Dooks Add set_rate methods for the extra clocks on the S3C2440 and add the camera UPLL clock source Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3359/1: S3C24XX - add support for clk_set_rateBen Dooks
Patch from Ben Dooks Add support for clk_set_rate and clk_round_rate to the s3c2410 clock implementation Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Convert kmalloc+memset to kzallocRussell King
Convert all uses of kmalloc followed by memset to use kzalloc instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3373/1: move uengine loader to arch/arm/commonLennert Buytenhek
Patch from Lennert Buytenhek Move the uengine loader from arch/arm/mach-ixp2000 to arch/arm/common so that ixp23xx can use it too. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3372/1: ep93xx: add defconfigLennert Buytenhek
Patch from Lennert Buytenhek Add ep93xx defconfig. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3371/1: ep93xx: gpio supportLennert Buytenhek
Patch from Lennert Buytenhek Add support for setting the direction of and getting/setting the value of the 64 GPIO lines. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3369/1: ep93xx: add core cirrus ep93xx supportLennert Buytenhek
Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3368/1: ixp4xx: set gpio direction in ixp4xx_config_irqAlessandro Zummo
Patch from Alessandro Zummo ixp4xx_config_irq did not configure the gpio line as an input. As an added bonus, the irq2gpio array has been converted from int to char. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3346/1: Fix udelay() for HZ values different from 100Peter Teichmann
Patch from Peter Teichmann Currently, if the kernels HZ value is greater than 100, delays with the udelay function are too short. This can cause trouble for instance with the zd1201 usb wlan driver. This patch suggests a solution that keeps the overhead small and maintains (hopefully) sufficient resolution. Signed-off-by: Peter Teichmann Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 23:24:15 +0000